SPECTRO-3-ANA Series
True color sensors (Analog)
GENERAL TECHNICAL DATA:
| Software | Windows® PC software: SPECTRO3-ANA-Scope |
| Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
| Current consumption | - SPECTRO-3-...-COF-ANA: <160mA - SPECTRO-3-...-DIF-ANA, -DIL-ANA, -FCL-ANA, -POL-ANA, -UV-ANA: <220mA - SPECTRO-3-FIO-ANA, -FIO-ANA-LEDCON, -FIO-ANA-XL, -FIO-UV-ANA: <160mA - SPECTRO-3-FIO-UV-ANA with external light source: <500mA - SPECTRO-3-SLU-... with SI-SLU-...: <300mA |
| Max. switching current | 100mA, short circuit proof |
| Input digital (1x) | IN0 (0V/+24V) |
| Outputs digital (2x) | OUT0, OUT1 (0V/+24V) |
| Outputs analog (3x) | OUT2, OUT3, OUT4: 0...+10V or 4...20mA (R,G,B or X,Y,INT or s,i,M) |
| Interface | RS232 (USB and Ethernet adaptor available) |
| Pulse lengthening | 0...100ms, abjustable via PC software |
| Averaging | max. 32768 values, abjustable via PC software |
| Scan frequency | LED operation, abjustable via PC software: - AC operation: max. 25kHz - DC and OFF operation: max. 90kHz |
| Switching frequency | typ. 60kHz |
| Analog band width | max. 90kHz (-3dB) |
| Transmitter (light source) | depends on sensor type |
| Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC), OFF operation (LED MODE-OFF) |
| Measuring range | depends on sensor type |
| Receiver | 3-color filter detector (TRUE COLOR), color filter curves acc. to CIE 1931 |
| Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
| Ambient light | max. 5000 Lux |
| Detection range | depends on sensor type |
| Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
| Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0,2 digits/°C (< 0,01%/°C) |
| Color difference | deltaE >= 0,5 |
| Color space | X Y INT siM (Lab) |
| Color memory | non-volatile EEPROM with parameter sets for max. 3 colors (max. 64 colors in group mode) |
| Housing dimensions | depends on sensor type |
| Housing material | Aluminum, anodized in black (if optics holding device: anodized) |
| Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 - SPECTRO-3-SLU-... to SI-SLU: each 4-pole fem. M8 connector - to external light source (only SPECTRO-3-FIO-UV-ANA): 4-pole fem. connector Binder 707 |
| Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH - connection SPECTRO-3-SLU-... to SI-SLU-...: cab-slu4/768 |
| Operating temp. range | -20°C ... +55°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | IP64 SPECTRO-3-200-COF-ANA, -500-COF-ANA: IP67 (optics), IP64 (electronics) |
| EMC test acc. to | DIN EN 60947-5-2 |
| External light source (optionally) |
SPECTRO-ELS-UV (for use with SPECTRO-3-FIO-UV-ANA only) |
















