SPECTRO-3-MSM-DIG Series
True color sensors (Digital)General technical data ....
GENERAL TECHNICAL DATA:
SPECTRO-3-...-MSM-DIG (M34):
SPECTRO-3-...-CL-MSM-DIG:
SPECTRO-3-...-JR-MSM-DIG:
SPECTRO-3-...-MSM-DIG-VIS (-VISUV):
SPECTRO-3-...-MSM-DIG (M34):
Software | Windows® PC software: SPECTRO3-MSM-DIG-Scope |
Sensors suitable for color measurement |
SPECTRO-3-12-DIF-MSM-DIG-DL SPECTRO-3-28-45°/0°-MSM-DIG-DL SPECTRO-3-FIO-MSM-DIG-DL* SPECTRO-3-12-DIF-MSM-DIG-VISUV SPECTRO-3-28-45°/0°-MSM-DIG-VISUV SPECTRO-3-FIO-MSM-DIG-VISUV* * Color measurement only in conjunction with a suitable optical attachment with a standard measurement geometry |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | - SPECTRO-3-...-COF-...-MSM-DIG: <160mA - SPECTRO-3-...-DIF-MSM-DIG: <220mA - SPECTRO-3-...-DIL-...-MSM-DIG: <220mA - SPECTRO-3-...-FCL-...-MSM-DIG: <220mA - SPECTRO-3-...-POL-...-MSM-DIG: <220mA - SPECTRO-3-...-UV-...-MSM-DIG: <220mA - SPECTRO-3-30-BL/OR-...-MSM-DIG: <220mA - SPECTRO-3-30-UV/BL-...-MSM-DIG: <220mA - SPECTRO-3-FIO-MSM-DIG, SPECTRO-3-FIO-UV-MSM-DIG: <160mA - SPECTRO-3-FIO-MSM-DIG, SPECTRO-3-FIO-UV-MSM-DIG with external light source: <500mA |
Max. switching current | 100mA, short circuit proof |
Switching state indication | 5 yellow LEDs (OUT0...OUT4) |
Input digital (1x) | IN0 (0V/+24V) or teach button at the sensor housing |
Outputs digital (5x) | OUT0...OUT4 (0V/+24V) |
Interface | RS232 (USB and Ethernet adaptor available) |
Pulse lengthening | 0...100ms, adjustable via PC software |
Averaging | max. 32768 values, adjustable via PC software |
Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 20kHz - DC operation: max. 35kHz |
Switching frequency | typ. 60kHz |
Transmitter (light source) | depends on sensor type |
Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC) |
Measuring range | depends on sensor type |
Receiver | 3-color filter detector (TRUE COLOR), color filter curves acc. to CIE 1931 |
Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
Ambient light | max. 5000 Lux |
Detection range | depends on sensor type |
Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0,2 digits/°C (< 0,01%/°C) |
Measurement accuracy | deltaE >= 0,7 |
Resolution | deltaE = 0,01 (L*u'v': delta u'v' = 0,001) |
Color spaces | L*a*b* , L*C*h* , L*u*v*, L*u‘v‘, xyY |
Color memory | non-volatile EEPROM with parameter sets for max. 31 colors (max. 48 colors in group mode) |
Housing dimensions | depends on sensor type |
Housing material | Aluminum, anodized in blue (if optics holding device: anodized) |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 - to external light source (only in case of SPECTRO-3-FIO-MSM-DIG, -FIO-UV-MSM-DIG): 4-pole fem. connector Binder 707 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
Operating temp. range | -20°C ... +55°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | IP67 (optics), IP64 (electronics) SPECTRO-3-FIO-MSM-DIG, -FIO-UV-MSM-DIG: IP64 |
EMC test acc. to | DIN EN 60947-5-2 |
External light source (optionally) |
- ELS-WHT-1P (for use with SPECTRO-3-FIO-MSM-DIG only) - ELS-UV-1P (for use with SPECTRO-3-FIO-UV-MSM-DIG only) |
SPECTRO-3-...-CL-MSM-DIG:
Software | Windows® PC software: SPECTRO3-MSM-DIG-Scope |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | - SPECTRO-3-...-COF-CL-MSM-DIG: <160mA - SPECTRO-3-...-DIL-CL-MSM-DIG: <220mA - SPECTRO-3-...-FCL-CL-MSM-DIG: <220mA - SPECTRO-3-...-POL-CL-MSM-DIG: <220mA - SPECTRO-3-...-UV-CL-MSM-DIG: <220mA - SPECTRO-3-FIO-CL-MSM-DIG: <160mA |
Max. switching current | 100mA, short circuit proof |
Switching state indication | 5 yellow LEDs (OUT0...OUT4) |
Input digital (1x) | IN0 (0V/+24V) or teach button at the sensor housing |
Outputs digital (5x) | OUT0...OUT4 (0V/+24V) |
Interface | RS232 (USB and Ethernet adaptor available) |
Pulse lengthening | 0...100ms, adjustable via PC software |
Averaging | max. 32768 values, adjustable via PC software |
Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 20kHz - DC and OFF operation: max. 35kHz |
Switching frequency | typ. 40kHz |
Transmitter (light source) | depends on sensor type |
Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC), OFF operation (LED MODE-OFF) |
Measuring range | depends on sensor type |
Receiver | 3-color filter detector (TRUE COLOR), color filter curves acc. to CIE 1931 |
Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
Ambient light | max. 5000 Lux |
Detection range | depends on sensor type |
Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0,2 digits/°C (< 0,01%/°C) |
Measurement accuracy | deltaE >= 0,7 |
Resolution | deltaE = 0,01 (L*u'v': delta u'v' = 0,001) |
Color spaces | L*a*b* , L*C*h* , L*u*v*, L*u‘v‘, xyY |
Color memory | non-volatile EEPROM with parameter sets for max. 31 colors (max. 48 colors in group mode) |
Housing dimensions | depends on sensor type |
Housing material | Aluminum, anodized in black (if optics holding device: anodized) |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
Operating temp. range | -20°C ... +55°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | IP67 (optics), IP64 (electronics) SPECTRO-3-FIO-CL-MSM-DIG: IP64 |
EMC test acc. to | DIN EN 60947-5-2 |
SPECTRO-3-...-JR-MSM-DIG:
Software | Windows® PC software: SPECTRO3-MSM-DIG-Scope |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | - SPECTRO-3-...-COF-JR-MSM-DIG: <160mA - SPECTRO-3-...-DIF-JR-MSM-DIG: <220mA - SPECTRO-3-...-DIL-JR-MSM-DIG: <220mA - SPECTRO-3-...-FCL-JR-MSM-DIG: <220mA - SPECTRO-3-...-POL-JR-MSM-DIG: <220mA - SPECTRO-3-...-UV-JR-MSM-DIG: <220mA - SPECTRO-3-FIO-JR-MSM-DIG: <160mA - SPECTRO-3-FIO-JR-XL-MSM-DIG: <160mA - SPECTRO-3-FIO-UV-JR-MSM-DIG: <160mA - SPECTRO-3-FIO-UV-JR-MSM-DIG with external light source: <500mA - SPECTRO-3-SLU-...-MSM-DIG with SI-SLU-...: <300mA |
Max. switching current | 100mA, short circuit proof |
Input digital (1x) | IN0 (0V/+24V) |
Outputs digital (5x) | OUT0...OUT4 (0V/+24V) |
Interface | RS232 (USB and Ethernet adaptor available) |
Pulse lengthening | 0...100ms, adjustable via PC software |
Averaging | max. 32768 values, adjustable via PC software |
Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 20kHz - DC and OFF operation: max. 35kHz |
Switching frequency | typ. 60kHz SPECTRO-3-FIO-JR-MSM-DIG: typ. 40kHz SPECTRO-3-FIO-JR-XL-MSM-DIG: typ. 40kHz SPECTRO-3-FIO-UV-JR-MSM-DIG: typ. 40kHz |
Transmitter (light source) | depends on sensor type |
Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC), OFF operation (LED MODE-OFF) |
Measuring range | depends on sensor type |
Receiver | 3-color filter detector (TRUE COLOR), color filter curves acc. to CIE 1931 |
Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
Ambient light | max. 5000 Lux |
Detection range | depends on sensor type |
Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0,2 digits/°C (< 0,01%/°C) |
Measurement accuracy | typ. deltaE >= 0,7 |
Resolution | deltaE = 0,01 (L*u'v': delta u'v' = 0,001) |
Color spaces | L*a*b* , L*C*h* , L*u*v*, L*u‘v‘, xyY |
Color memory | non-volatile EEPROM with parameter sets for max. 31 colors (max. 48 colors in group mode) |
Housing dimensions | depends on sensor type |
Housing material | Aluminum, anodized in black |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 - SPECTRO-3-SLU-...-MSM-DIG to SI-SLU-...: each 4-pole M8 fem. connector - to external light source (only SPECTRO-3-FIO-UV-JR-MSM-DIG): 4-pole fem. connector Binder 707 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC or cab-4/USB or cab-4/ETH - connection SPECTRO-3-SLU-...-MSM-DIG to SI-SLU-...: cab-slu4/768 |
Operating temp. range | -20°C ... +55°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | IP64 |
EMC test acc. to | DIN EN 60947-5-2 |
External light source (optionally) |
SPECTRO-ELS-UV (for use with SPECTRO-3-FIO-UV-JR-MSM-DIG only) |
SPECTRO-3-...-MSM-DIG-VIS (-VISUV):
Software | Windows® PC software: SPECTRO3-MSM-DIG-Scope |
Voltage supply | +24VDC (± 10%), reserve polarity protected, overload protected |
Current consumption | SPECTRO-3-12-DIF-MSM-DIG-VIS / -VISUV: <1.2A SPECTRO-3-28-45°/0°-MSM-DIG-VIS / -VISUV: <700mA SPECTRO-3-...-FIO-MSM-DIG-VIS / -VISUV: <160mA |
Max. switching current | 100mA, short circuit proof |
Input digital (1x) | IN0 (0V/+24V) |
Outputs digital (5x) | OUT0...OUT4 (0V/+24V) |
Interface | RS232 (USB and Ethernet adaptor available) |
Pulse lengthening | 0...100ms, 0...100ms, adjustable via PC software |
Averaging | max. 32768 values, adjustable via PC software |
Scan frequency | LED operation, adjustable via PC software: - AC operation: max. 20kHz - DC and OFF operation: max. 35kHz |
Switching frequency | typ. 40kHz |
Transmitter (light source) | depends on sensor type |
Transmitter control | can be switched via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC), OFF operation (LED MODE-OFF) |
Measuring range | depends on sensor type |
Receiver | 3-color filter detector (TRUE COLOR), color filter curves acc. to CIE 1931 |
Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
Ambient light | max. 5000 Lux |
Detection range | depends on sensor type |
Reproducibility | in x,y color range each 1 digit at 12-bit A/D conversion |
Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0,2 digits/°C (< 0,01%/°C) |
Measurement accuracy | typ. deltaE >= 0.3 |
Resolution | deltaE = 0,01 (L*u'v': delta u'v' = 0,001) |
Color spaces | L*a*b* , L*C*h* , L*u*v*, L*u‘v‘, xyY |
Color memory | non-volatile EEPROM with parameter sets for max. 31 colors (max. 48 colors in group mode) |
Housing dimensions | depends on sensor type |
Gehäusematerial | Aluminum, anodized in black |
Connectors | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 |
Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
Operating temp. range | -20°C ... +55°C |
Storage temp. range | -20°C ... +85°C |
Enclosure rating | IP64 |
EMC test acc. to | DIN EN 60947-5-2 |