|
Karta :
|
APP N° 803
Param.:
|
INI:
|
|
Medición de color de tapas de plástico Se necesita medir el color de tapas de plástico.
Plastic cap color measurement
The color of plastic caps should be measured.
|
|
|
Karta :
|
APP N° 802
|
Distinción entre componentes interiores de cuero, tejido y plástico Se necesita distinguir componentes interiores de cuero, tejido y plástico.
Differentiation of leather, fabric and synthetic interior components
Leather, fabric and plastic interior parts should be differentiated.
|
|
|
Karta :
|
APP N° 801
Param.:
|
|
Detección de abolladuras y protuberancias en tiras metálicas troqueladas Se necesita detectar abolladuras y protuberancias en tiras metálicas troqueladas.
Detection of dents and bumps on metal punching strips
Dents and bumps on metal punching strips should be detected.
|
|
|
Karta :
|
APP N° 800
Param.:
|
INI:
|
|
Detección de deformaciones de tiras troqueladas Se necesita detectar deformaciones de tiras troqueladas.
Detection of deformations on stamping stripes
Deformations on stamping stripes should be detected.
|
|
|
Karta :
|
APP N° 799
Param.:
|
|
Control de presencia de una masa de relleno en un componente de plástico Se necesita comprobar la presencia de una masa de relleno en una pieza de plástico.
Presence control of a potting compound on plastic components
The presence of a sealing compound on plastic components should be controlled.
|
|
|
Karta :
|
APP N° 798
Param.:
|
INI:
|
|
Distinción de piezas interiores de cuero y plástico Se necesita distinguir componentes interiores hechos con cuero y plástico.
Differentiation of leather and plastic interior components
Leather and synthetic interior parts should be differentiated.
|
|
|
Karta :
|
APP N° 797
|
Control de color de piezas brutas de plástico reciclado Se necesita controlar el color de piezas brutas de plástico hechas con material reciclado.
Color control of preforms made of recyclates
Preforms made of recycled material should be color controlled.
|
|
|
Karta :
|
APP N° 796
Param.:
|
INI:
|
|
Distinción de color de topes de goma a gran distancia Se necesita distinguir topes de goma a gran distancia por su color.
Color differentiation of rubber buffers from a distance
The color of rubber buffers should be controlled from a distance.
|
|
APP N° 795
|
Medición de espesor de una lámina retráctil transparente Se necesita calcular el espesor de una lámina retráctil ópticamente transparente.
Translucent stretch film thickness measurement
The thickness of a translucent stretch film should be measured.
|
|
|
Karta :
|
APP N° 794
|
Control de presencia de películas de aceite muy finas Se necesita comprobar la presencia de una capa de aceite muy fina (< 1µm).
Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
|
|
|
Karta :
|
APP N° 793
|
Control de color de piezas brutas de botellas de plástico Se necesita controlar de piezas brutas de botellas de plástico.
Color control of preforms
The color of preforms should be controlled.
|
|
|
Karta :
|
APP N° 792
|
Distinción de parte delantera/trasera de láminas de aluminio revestidas Se necesita distinguir la parte delantera de la parte trasera de láminas de aluminio revestidas.
Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.
|
|
|
Karta :
|
APP N° 791
INI:
|
|
Control de presencia de frascos en envases de medicamentos Se necesita comprobar la presencia de frascos de cristal en envases de medicamentos.
Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.
|
|
|
Karta :
|
APP N° 790
INI:
|
|
Medición de brillos de revestimientos de suelo de plástico Se necesita medir el nivel de brillo de revestimientos de suelo de plástico.
Gloss measurement of synthetic floorings
The gloss of plastic floors should be measured.
|
|
|
Karta :
|
APP N° 789
|
Medición de espesor de láminas de plástico Se necesita calcular el espesor de láminas de plástico retráctil.
Plastic film thickness measurement
The thickness of plastic stretch film should be measured.
|
|
|
Karta :
|
APP N° 788
Param.:
|
|
Detección de estrías en una superficie de plástico Se necesita comprobar la ausencia de estrías y rayas en una superficie de plástico.
Streak detection on a plastic surface
A plastic surface should be controlled regarding freedom from streaks and striae.
|
|
|
Karta :
|
APP N° 787
|
Control de revoluciones de motores eléctricos Se necesita controlar la frecuencia de motores eléctricos.
Frequency control of electric motors
The frequency of electric motors should be controlled.
|
|
|
Karta :
|
APP N° 786
|
Control de chorro pulverizado Se necesita controlar un chorro pulverizado pulsado con baja intensidad.
Spray jet control
A pulsed, weakly dosed spray jet should be controlled.
|
|
|
Karta :
|
APP N° 785
|
Control de anchura de chapas metálicas Se necesita medir la anchura de chapas metálicas que se desplazan a gran velocidad.
Width control of metal sheets
The width of very fast moved metal sheets should be measured.
|
|
|
Karta :
|
APP N° 784
|
Detección y recuento de alambres durante el proceso de bobinado Se necesita controlar la presencia y el número de alambres durante el proceso de bobinado.
Wire detection and counting during the braiding process
Wires should be detected and counted during the braiding process.
|
|
|
Karta :
|
APP N° 783
|
Detección de bordes en bolsas de papel plegadas en cascada y en cartón ondulado en cascada Se necesita detectar y contar bolsas de papel plegadas y transportadas en cascada, así como cartón ondulado dispuesto en cascada.
Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.
|
|
|
Karta :
|
APP N° 782
Param.:
|
|
Detección de costuras en tejidos Se necesita detectar la costura de tejidos técnicos.
Seam detection on fabrics
The seam on technical fabrics should be detected.
|
|
|
Karta :
|
APP N° 781
|
Control de malla de tiras de malla metálica Se necesita controlar la malla de tiras de malla metálica.
Mesh control on metal braided hoses
Meshes on metal braided hoses should be controlled.
|
|
|
Karta :
|
APP N° 780
Param.:
|
INI:
|
|
Control de trenzado de mangueras de malla Se necesita controlar el trenzado de mangueras de malla.
Meshes control on fabric hoses
The meshes of a braided hose should be controlled.
|
|
|
Karta :
|
APP N° 779
Param.:
|
INI:
|
|
Control de brillo y color de chapas metálicas pintadas Se necesita controlar el color y el brillo de chapas metálicas pintadas.
Color-gloss control of lacquered metal sheets
Lacquered metal sheets should be controlled with regard to the color and gloss.
|
|
|
Karta :
|
APP N° 778
|
Distinción de componentes interiores de cuero y plástico Se necesita distinguir piezas interiores de cuero y plástico entre sí.
Differentiation of leather and synthetic interior components
Leather and plastics interior parts should be differentiated.
|
|
|
Karta :
|
APP N° 777
|
Detección de defectos en discos de sierra Se necesita detectar defectos en discos de sierra.
Defect recognition on saw blade discs
Defects on saw blade discs should be detected.
|
|
|
Karta :
|
APP N° 776
|
Detección de dobladillos en toallas de mano Se necesita detectar dobladillos en toallas de mano.
Seam detection on towels
The seam on towels should be detected.
|
|
|
Karta :
|
APP N° 775
Param.:
|
INI:
|
|
Distinción de alfombras grises Se necesita distinguir alfombras grises entre sí.
Grey carpet differentiation
Grey carpets should be differentiated.
|
|
|
Karta :
|
APP N° 774
|
Distinción entre el lado de PET y el lado de PE de placas de plástico Se necesita distinguir el lado de PET del lado de PE de placas de plástico.
Differentiation of PE and PET side of plastic plates
The PET side of plastic plates should be differentiated from the PE side.
|
|
|
Karta :
|
APP N° 773
|
Control de presencia de adhesivos transparentes en tapas de plástico Se necesita controlar la presencia de etiquetas transparentes en tapas de plástico.
Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.
|
|
|
Karta :
|
APP N° 772
|
Medición de espesor de alfombras abrasivas Se necesita medir el espesor de alfombras abrasivas.
Thickness control of abrasive carpets
The thickness of abrasive carpets should be measured.
|
|
|
Karta :
|
APP N° 771
|
Control de color de palitos de madera Se necesita controlar el color de palitos de madera.
Color control of wooden sticks
The color of wooden sticks should be controlled.
|
|
|
Karta :
|
APP N° 770
Param.:
|
|
Medición de brillo de papeles de lija Se necesita calcular el factor de brillo de papeles de lija.
Gloss measurement of sandpapers
The gloss factor of sandpapers should be measured.
|
|
|
Karta :
|
APP N° 769
Param.:
|
|
Control de color de barras luminosas Se necesita controlar el color de barras luminosas.
Color control of light pipes
The color of light pipes should be controlled.
|
|
|
Karta :
|
APP N° 768
Param.:
|
|
Medición de color de placas de aluminio pintadas Se necesita medir el color de placas de aluminio pintadas.
Color measurement of lacquered aluminum plates
The color of lacquered aluminum plates should be measured.
|
|
|
Karta :
|
APP N° 767
|
Medición de brillo de placas de aluminio pintadas Se necesita calcular el nivel de brillo de chapas de aluminio pintadas.
Gloss measurement of painted aluminum plates
The gloss factor of lacquered aluminum plates should be measured.
|
|
|
Karta :
|
APP N° 766
|
Medición de brillo de láminas decorativas Se necesita calcular el nivel de brillo de láminas decorativas.
Gloss measurement on decorative films
The gloss factor should be measured on different decorative films.
|
|
|
Karta :
|
APP N° 765
Param.:
|
INI:
|
|
Detección de marcas de pintura en tiras adhesivas de plástico translúcido Se necesita detectar marcas de pintura en tiras adhesivas de plástico transparente.
Color mark recognition on transparent plastic films
A color mark on a translucent synthetic tape should be recognized.
|
|
|
Karta :
|
APP N° 764
Param.:
|
INI:
|
|
Control de posición de piezas de plástico Se necesita controlar la posición correcta de piezas de plástico transparente.
Synthetic component orientation control
The orientation of transparent plastic parts should be controlled.
|
|
|
Karta :
|
APP N° 763
Param.:
|
INI:
|
|
Detección de marcas de pintura en tiras adhesivas transparentes Se necesita detectar marcas de pintura en tiras adhesivas transparentes.
Color mark detection on transparent plastic adhesive strips
Color marks should be detected on transparent synthetic glue strips.
|
|
|
Karta :
|
APP N° 762
|
Control de posición de piezas metálicas troqueladas Se necesita controlar la posición exacta de piezas metálicas troqueladas.
Position control of metal stamping parts
The position of metal stamping parts should be controlled.
|
|
|
Karta :
|
APP N° 761
|
Medición de color de alambres de plástico Se necesita medir el color de alambres de plástico.
Color measurement of synthetic wires
The color of synthetic wires should be measured.
|
|
|
Karta :
|
APP N° 760
Param.:
|
|
Distinción entre componentes interiores de plástico y componentes interiores de cuero Se necesita distinguir piezas interiores de plástico de componentes interiores de cuero.
Differentiation of interior leather and plastic parts
Interior leather and plastic parts should be differentiated.
|
|
|
Karta :
|
APP N° 759
Param.:
|
INI:
|
|
Distinción entre componentes interiores de cuero y componentes interiores de plástico Se necesita distinguir componentes interiores de cuero de piezas interiores de plástico.
Differentiation of leather and synthetic interior components
Leather interior components should be differentiated from synthetic interior components.
|
|
|
Karta :
|
APP N° 758
Param.:
|
INI:
|
|
Distinción de componentes interiores de plástico Se necesita distinguir componentes interiores de plástico.
Differentiation of interior plastic components
Interior plastic parts should be differentiated.
|
|
|
Karta :
|
APP N° 757
|
Medición de revoluciones de rotores turbocompresores Se necesita controlar la frecuencia de rotores turbocompresores.
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled.
|
|
|
Karta :
|
APP N° 756
Param.:
|
|
Detección del flanco descendente y ascendente de una tira metálica sobre un fondo metálico Se necesita detectar el flanco ascendente y el flanco descendente de tiras metálicas sobre chapas.
Detection of a rising and falling edge of a metal stripe on metal sheet
A rising as well as a falling edge of a metal stripe on metal sheet should be detected.
|
|
|
Karta :
|
APP N° 755
Param.:
|
|
Distinción de tuercas roscadas mediante el control del diámetro interior Se necesita distinguir tuercas M8 de tuercas M10 en línea a través de la medición del diámetro interior.
Inside diameter differentiation of threaded nuts
M8 and M10 screw-nuts should be inline differentiated by inner diameter measurement.
|
|
|
Karta :
|
APP N° 754
Param.:
|
|
Control del diámetro interior de tuercas roscadas Se necesita medir el diámetro interior de tuercas roscadas.
Inner diameter control of screw-nuts
The inner diameter of screw-nuts should be measured.
|
|
|
Karta :
|
APP N° 753
|
Recuento de alambres en una instalación de cableado Se necesita contar el número de cables durante el proceso de bobinado en instalaciones de cableado.
Wire counting on wire winding machines
The number of wires on a wire winding machine should be counted.
|
|
|
Karta :
|
APP N° 752
|
Detección de la presencia de aceite en tornillos de remache Se necesita comprobar la presencia de aceite en tornillos de remache.
Detection of the presence of oil on rivet screws
The presence of oil on rivet screws should be detected.
|
|
APP N° 751
|
Detección de película de aceite en pernos metálicos Se necesita comprobar la presencia de una película de aceite en pernos metálicos.
Oil film detection on metal pins
An oil film on metal pins should be detected.
|
|
|
Karta :
|
APP N° 750
Param.:
|
|
Medición de color de madejas de algodón teñidas de amarillo Se necesita medir el color de madejas de algodón teñidas de amarillo durante la producción.
Color measurement of dyed yellow cotton strands
The color of cotton strands should be measured during the tinting process.
|
|
|
Karta :
|
APP N° 749
Param.:
|
INI:
|
|
Color separation of recycled textiles During the recycling process textiles should be color separated.
Color separation of recycled textiles
During the recycling process textiles should be color separated.
|
|
|
Karta :
|
APP N° 748
Param.:
|
|
Distinción de color de piezas interiores de plástico Se deben diferenciar por color los componentes interiores de plástico.
Color differentiation of plastic interior components
Plastic interior parts should be differentiated.
|
|
|
Karta :
|
APP N° 747
|
Distinción de piezas de cuero y de plástico en el área interior Se deben separar los componentes interiores de cuero de los componentes interiores de plástico.
Differentiation of leather and leather imitation interior components
Leather interior components should be differentiated from plastic interior parts.
|
|
|
Karta :
|
APP N° 746
Param.:
|
|
Medición de color de placas de plástico con diferente superficie Se deben medir las placas de plástico con superficie lisa, mediana y rugosa respecto al color.
Color measurement of plastic plates with different structures
The color of plastic plates with a fine, middle and coarse surface should be measured.
|
|
|
Karta :
|
APP N° 745
Param.:
|
|
Medición de color de hilos de poliester Se debe medir el color de los hilos de poliester.
Color measurement of polyester thread
The color of polyester thread should be measured.
|
|
|
Karta :
|
APP N° 744
Param.:
|
|
Medición de color de tejido de poliester Se debe medir el color de los tejidos de poliester.
Color measurement of polyester mesh
The color of polyester mesh should be measured.
|
|
|
Karta :
|
APP N° 743
Param.:
|
|
Medición de frecuencia de ventiladores giratorios Se debe determinar la frecuencia de los ventiladores giratorios.
Frequency measurement of rotating fans
The frequency of rotating blowers should be measured.
|
|
|
Karta :
|
APP N° 742
Param.:
|
|
Detección de marcas de color en hojas de sierra Se deben detectar las marcas de color en las hojas de sierra.
Color mark detection on saw blades
Color marks should be detected on saw blades.
|
|
|
Karta :
|
APP N° 741
Param.:
|
|
Detección de marcas de color en tornillos metálicos Se deben detectar las marcas de color en la parte frontal de tornillos metálicos.
Color mark detection on metal screws
The color mark on metal screws should be detected.
|
|
|
Karta :
|
APP N° 740
Param.:
|
|
Distinción de parte delantera/parte trasera de componentes de plástico Se debe diferenciar la parte trasera de los componentes de plástico planos de la parte delantera.
Backside/frontside differentiation of synthetic parts
The backside should be differentiated from the frontside of flat synthetic components.
|
|
|
Karta :
|
APP N° 739
Param.:
|
|
Distinción de parte delantera/parte trasera en piezas de plástico Se debe diferenciar la parte delantera de los componentes de plástico planos de la parte trasera.
Frontside and backside differentiation of a plastic part
The frontside of a flat plastic part should be differentiated from the backside.
|
|
|
Karta :
|
APP N° 738
Param.:
|
|
Detección de puntos de pegado en cigarrillos Se debe detectar el punto de pegado de cigarrillos.
Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.
|
|
|
Karta :
|
APP N° 737
Param.:
|
|
Detección de cordón de soldadura en latas Se deben detectar los cordones de soldadura de latas.
Welding line detection of tin cans
The welding line on tin cans should be detected.
|
|
|
Karta :
|
APP N° 736
Param.:
|
INI:
|
|
Distinción de color de cabezas de rosca en gris claro y negro Se deben distinguir las cabezas de rosca de color plateado de las cabezas de rosca revestidas de negro.
Differentiation of silver-colored screws from black coated screws
Silver-colored screws should be differentiated from black coated screws.
|
|
|
Karta :
|
APP N° 735
Param.:
|
INI:
|
|
Detección de marcas de color sobre semi-carcasas de cojinete deslizante Se deben detectar las marcas de color en semi-carcasas de cojinete deslizante.
Color mark detection on slide bearings
The color mark on slide bearings should be detected.
|
|
|
Karta :
|
APP N° 734
Param.:
|
|
Distinción entre componentes interiores de cuero y de PVC Se debe distinguir las piezas de cuero de las piezas de PVC.
Differentiation of leather from PVC interior components
Leather interior parts should be differentiated from PVC components.
|
|
|
Karta :
|
APP N° 733
|
Medición del diámetro interior de piezas metálicas Se debe revisar el diámetro interior de componentes metálicos.
Inner diameter measurement of metal components
The inner diameter of metal components should be measured.
|
|
|
Karta :
|
APP N° 732
|
Detección de un espacio entre dos laminados adyacentes Se debe detectar el espacio entre laminados.
Detection of a gap between vinyl layers
A gap between vinyl layers should be detected.
|
|
|
Karta :
|
APP N° 731
|
Distinción entre el lado de estaño y el lado de aire de vidrios flotados En los vidrios flotados se debe distinguir entre el lado de estaño y el lado de aire.
Differentiation of tin and air side of float glasses
The tin side should be differentiated from the air side of float glasses.
|
|
|
Karta :
|
APP N° 730
|
Control de densidad de fibra de fieltros de fibra finos Se debe controlar la densidad de fibra de los fieltros.
Fiber density control of fiber sheets
The density of fiber sheets should be controlled.
|
|
|
Karta :
|
APP N° 729
|
Recuento de los pliegues de filtros de aceite y de aire Se deben detectar los pliegues de filtros de aceite y de aire.
Counting of folds on oil and air filter mats
Folds of oil and air filter mats should be detected.
|
|
|
Karta :
|
APP N° 728
Param.:
|
|
Detección de un cordón de soldadura en una lata Se debe detectar el cordón de soldadura en una lata impresa.
Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.
|
|
|
Karta :
|
APP N° 727
|
Medición de espesor de paneles termoaislantes Se debe medir EN LÍNEA el espesor de esteras termoaislantes.
Thickness measurement of thermal insulation panels
The thickness of thermal insulation panels should be measured INLINE.
|
|
|
Karta :
|
APP N° 726
|
Control de altura de resortes de espiral de metal Se debe medir la altura de resortes de espiral de metal.
Metal spring height control
The height of metal springs should be measured.
|
|
|
Karta :
|
APP N° 725
|
Medición de espesor de juntas planas Se debe medir el espesor de juntas planas.
Thickness measurement of flat gaskets
The thickness of flat gaskets should be measured.
|
|
|
Karta :
|
APP N° 724
|
Distinción de color de piezas azuladas y amarillentas de plástico claro y transparente Las piezas amarillentas de plástico claro se deben distinguir de las piezas azuladas de plástico transparente.
Differentiation of yellowish cast to bluish shade clear transparent plastic components
Clear bluish transparent plastic components should be differentiated from yellowish parts.
|
|
|
Karta :
|
APP N° 723
Param.:
|
|
Distinción de color de piezas de plástico claro y transparente Los componentes amarillentos de plástico claro y transparente se deben distinguir de las piezas azuladas.
Color differentiation of clear transparent plastic parts
A yellowish cast to a bluish shade of transparent clear plastic components should be detected.
|
|
|
Karta :
|
APP N° 722
Param.:
|
|
Distinción entre componentes de plástico azulados y amarillentos Se deben distinguir las piezas de plástico blanco que tienden al azul de los componentes de plástico blanco que se están volviendo amarillos.
Differentiation of bluish and yellowish colored plastic parts
Blueish colored plastic parts should be differentiated from yellowish colored plastic components.
|
|
|
Karta :
|
APP N° 721
Param.:
|
|
Distinción entre componentes interiores mates y brillantes en el ámbito automovilístico Se deben distinguir las piezas interiores brillantes de las mates.
Differentiation of shiny and matt automotive interior components
Matt and shiny interior components should be differentiated.
|
|
|
Karta :
|
APP N° 720
Param.:
|
|
Detección de marcas de pintura en tableros de madera Se deben detectar marcas de pintura en tableros de madera. Las marcas de pintura son líneas rojas, verdes o negras con un ancho de trazo de 2 mm aprox.
Color mark detection on wood plates
Color marks on wood plates should be detected. It should be noted that the color marks are black, green or red lines with a width of around 2mm.
|
|
|
Karta :
|
APP N° 719
Param.:
|
|
Control superficial de chapas de acero inoxidable Se debe controlar la superficie de chapas de acero inoxidable.
Surface control of stainless-steel sheets
The surface of stainless-steel sheets should be controlled.
|
|
|
Karta :
|
APP N° 718
|
Detección de cola en el tejido base de una alfombra Se debe detectar la existencia de una capa de cola en el tejido base de una alfombra.
Glue detection on carpet backing
The presence of glue should be controlled on carpet backing.
|
|
|
Karta :
|
APP N° 717
Param.:
|
|
Recuento de pliegues en mangueras de aluminio Se deben contar los pliegues existentes en mangueras de aluminio. Para ello, hay que tener en cuenta que la distancia entre los pliegues puede variar.
Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.
|
|
|
Karta :
|
APP N° 716
Param.:
|
|
Recuento de tapaderas de plástico transparentes Se deben contar las tapaderas de plástico translúcidas.
Counting of transparent plastic lids
Transparent plastic lids should be counted.
|
|
|
Karta :
|
APP N° 715
Param.:
|
|
Recuento de vasos de plástico translúcidos Se deben contar los vasos de plástico translúcidos.
Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.
|
|
|
Karta :
|
APP N° 714
|
Recuento de hojas sueltas Se deben contar las hojas sueltas solapadas que se transportan en la cinta transportadora.
Single paper sheet counting
Single sheets imbricated and transported on a conveyor belt should be counted.
|
|
|
Karta :
|
APP N° 713
Param.:
|
|
Recuento de recipientes de plástico transparentes Se deben contar los recipientes de plástico transparentes dispuestos en línea de forma consecutiva, sin espacios entre sí.
Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.
|
|
|
Karta :
|
APP N° 712
|
Recuento de sacos de papel Inmediatamente después de la fabricación de sacos de papel, se deben contar los sacos que se transportan en una cinta transportadora. Para ello, por un lado hay que tener en cuenta que cada saco de papel dispone de un borde doble y, por otro, que la distancia entre los sacos de papel puede variar, por lo que también puede hacerlo su altura de apilado.
Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.
|
|
|
Karta :
|
APP N° 711
Param.:
|
|
Control de color de pinturas líquidas a través de mirillas El color de las pinturas líquidas se debe controlar a través de mirillas. Se debe tener en cuenta que las placas de vidrio tienen una superficie reflectante.
Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
|
|
|
Karta :
|
APP N° 710
|
Cantidades de tapas de plástico apiladas Las tapas de plástico se deben contar sin contacto.
Counting of stacked plastic lids
Stacked plastic lids should be counted.
|
|
APP N° 709
Param.:
|
INI:
|
|
Diferenciación de color del lado delantero y trasero de componentes de cuero para interior Se deben diferenciar, por su color, el lado delantero y el trasero de los componentes de cuero para interior.
Backside–frontside color differentiation of leather interior components
Leather interior components should be color differentiated related to the backside–frontside.
|
|
|
Karta :
|
APP N° 708
Param.:
|
INI:
|
|
Distinción de color de componentes de plástico lacados Se deben distinguir las piezas de plástico lacadas según su color.
Color differentiation of painted plastic components
Lacquered plastic components should be color differentiated.
|
|
|
Karta :
|
APP N° 707
Param.:
|
|
Distinción de color de piezas de plástico lacadas Se deben distinguir por el color los componentes de plástico lacados en negro y ónice de piezas de plástico lacadas en negro.
Color differentiation of lacquered plastic components
Painted onyx-black components should be differentiated from lacquered black components.
|
|
|
Karta :
|
APP N° 706
Param.:
|
INI:
|
|
Distinción de color de distintos tipos de café Se deben distinguir distintos tipos de café según su color.
Color differentiation of different types of coffee
Different types of coffee should be distinguished by color.
|
|
|
Karta :
|
APP N° 705
|
Distinción entre etiquetas de papel blanco y relleno sintético blanco Se deben distinguir las etiquetas de papel blanco del relleno sintético blanco.
Differentiation of white paper and white synthetic cotton
White paper should be differentiated from white synthetic cotton.
|
|
|
Karta :
|
APP N° 704
|
Detección de una marca grabada con láser en una barra de acero fino Se deben detectar las marcas grabadas con láser en barras de acero fino.
Detection of a laser-engraved mark on a stainless-steel rod
Laser-engraved marks on stainless steel rods should be detected.
|
|
|
Karta :
|
APP N° 703
|
Control de posición y de ángulo de las ráfagas de pulverización de boquillas pulverizadoras limpiacristales Se deben controlar la posición y el ángulo de salida de las ráfagas de pulverización que salen de las boquillas pulverizadoras limpiacristales. Las boquillas limpiacristales de gran calidad disponen de dos ráfagas rígidas y casi en paralelo, además de otra en abanico. Además, con ello también se debe controlar el ángulo de apertura de la ráfaga en abanico, así como la cantidad pulverizada de las ráfagas en haces.
Position and angle control of washer jets
The position and angle of washer jets should be controlled. High-end washer jets provide normally two near-collimated water jets with a rigid angle and a fan beam with a wide angle. The task of the measuring instrument is furthermore to control the opening angle of the fan beam as well as the amount of water in the near-collimated water jets.
|
|
|
Karta :
|
APP N° 702
|
Detección de marcas de color en embalajes de papel Se deben detectar las marcas de color en las bolsas de papel. Téngase en cuenta que, para ello, se deben detectar tanto las marcas de color negro sobre fondo blanco como las marcas de color blanco sobre fondo negro.
Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.
|
|
|
Karta :
|
APP N° 701
|
Controles de proceso de soldadura láser Durante el proceso de soldado láser se debe analizar el color y la intensidad de la emisión de luz derivada de dicho proceso de soldadura.
Laser welding process control
During the laser welding the color as well as the intensity of the emitted light, caused by the laser welding, should be controlled.
|
|
|
Karta :
|
APP N° 700
Param.:
|
|
Medición de color de piezas de aluminio anodizado Se debe medir el color de los componentes anodizados de aluminio.
Color measurement of anodized aluminum parts
The color of anodized aluminum parts should be measured.
|
|
|
Karta :
|
APP N° 699
|
Medición de la transmisión UVA de laminitas de plástico Se deben medir las propiedades de transmisión de luz en el ámbito UVA.
UVA transmittance of plastic plates
The UVA transmittance of plastic plates should be measured.
|
|
|
Karta :
|
APP N° 698
|
Medición de distancia de placas de aislamiento Se debe medir la distancia hasta las placas de aislamiento.
Distance measurement to insulation panels
The distance to insulation panels should be measured.
|
|
|
Karta :
|
APP N° 697
|
Medición de distancia en ventanillas laterales de plexiglás Se debe medir la distancia entre las ventanillas laterales de plástico.
Distance measurement of plastic side windows
The distance to plastic side windows should be measured.
|
|
|
Karta :
|
APP N° 696
|
Distinción de color entre componentes de plástico marrones y negros para ámbitos de interior Las imitaciones de cuero en color marrón se deben distinguir de aquellas de color negro.
Color differentiation of black and brown interieur plastic components
Black and brown interior plastic parts should be color differentiated.
|
|
|
Karta :
|
APP N° 695
Param.:
|
|
Medición de brillo de imitaciones de cuero en el área interior Se debe determinar el brillo de imitaciones de cuero de plástico.
Gloss measurement of leather imitations
The gloss of leather interior imitations should be measured.
|
|
|
Karta :
|
APP N° 694
Param.:
|
INI:
|
|
Control de fluorescencia de color de carretes de hilo Se deben diferenciar los carretes de hilo respecto a la fluorescencia de color.
Fluorescence color control of yarn bobbins
The fluorescence color of yarn bobbins should be controlled.
|
|
|
Karta :
|
APP N° 693
Param.:
|
INI:
|
|
Comprobación de la exactitud de posición de granos de maíz Se debe revisar la alineación de los granos de maíz.
Orientation control of maize kernels
During the corn handling, the orientation of maize kernels should be controlled.
|
|
|
Karta :
|
APP N° 692
|
Control de presencia de la tira de desgarre en cajetillas de cigarrillos Se debe comprobar la presencia de tiras de desgarre en embalajes de cigarrillos.
Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.
|
|
|
Karta :
|
APP N° 691
Param.:
|
|
Detección de marcas de color sobre láminas de metal Se deben detectar diferentes marcas de color sobre láminas de metal de diferentes colores.
Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.
|
|
|
Karta :
|
APP N° 690
|
Detección de un espacio en una línea de cola aplicada sobre una lámina de aluminio Se deben detectar espacios en una línea de cola sobre una lámina de aluminio a partir de un tamaño de 5 x 1 mm.
Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.
|
|
|
Karta :
|
APP N° 689
Param.:
|
INI:
|
|
Diferenciación de color de componentes de plástico pintados para la industria automovilística Las piezas de plástico pintadas para el sector automovilístico se deben separar por color.
Color differentiation of plastic automotive components
Lacquered automotive plastic components should be color differentiated.
|
|
|
Karta :
|
APP N° 688
|
Detección de puntos de pegado de filtros de cigarrillos Se debe monitorizar la calidad de puntos de pegado de filtros de cigarrillos.
Splice inspection of cigarette filters
The splices of cigarettes should be controlled.
|
|
|
Karta :
|
APP N° 687
|
Control de presencia de etiquetas adhesivas transparentes Se debe monitorizar la presencia de etiquetas transparentes.
Presence control of transparent labels
The presence of transparent labels should be controlled.
|
|
|
Karta :
|
APP N° 686
Param.:
|
INI:
|
|
Separación de color de piezas de metal Se deben separar las partículas de metal respecto al color.
Color separation of metal parts
Metal parts should be separated depending on the color.
|
|
|
Karta :
|
APP N° 685
|
Control de capa de adhesivo sobre cintas de plástico Se debe monitorizar el grosor de una capa de cola sobre una cinta de plástico.
Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.
|
|
|
Karta :
|
APP N° 684
|
Control de color de cubiertas de plástico azul oscuro Se deben comprobar las cubiertas de plástico azul oscuro respecto al cumplimiento de tolerancia de color.
Color control of deep blue plastic covers
The color of blue plastic covers should be controlled, whether the respective cover is inside the tolerance range or not.
|
|
|
Karta :
|
APP N° 683
INI:
|
|
Detección de un punto de solapamiento de dos chapas en rotores y, además, de si hay un cordón de soldadura Se debe revisar la presencia de un cordón de soldadura en ventiladores de metal. Además, se debe comprobar si las dos chapas solo se solapan o si se han soldado.
Detection of overlapped metal plates on metal fans and further whether the metal plates are welded
The presence of welding lines should be controlled on metal fans. Furthermore, it should be controlled, whether the overlapped metal plates are welded or not welded.
|
|
|
Karta :
|
APP N° 682
|
Diferenciación de una lámina de plástico recubierta de una lámina de plástico no recubierta Se debe diferenciar una lámina de plástico no recubierta de una lámina de plástico recubierta.
Differentiation of coated and uncoated plastic film
An uncoated plastic film should be distinguished from a coated plastic film.
|
|
|
Karta :
|
APP N° 681
|
Control de color y de luminosidad de bombillas Se debe monitorizar el color y la luminosidad de bombillas de filamento.
Color and intensity control of filament lamps
The color as well as the intensity of filaments lamps should be controlled.
|
|
|
Karta :
|
APP N° 680
|
Diferenciación entre barras de metal bruñido negro y barras de metal Las barras de metal bruñido negro se deben diferenciar de las barras de metal.
Differentiation of black finished metal rod and metal rod
Black bronzed metal rods should be distinguished from metal rods.
|
|
|
Karta :
|
APP N° 679
|
Control de pintura de molduras interiores brillantes Se debe monitorizar la calidad de la pintura de molduras interiores brillantes.
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
|
|
|
Karta :
|
APP N° 678
Param.:
|
|
Control de pintura de molduras interiores brillantes Se debe monitorizar la calidad de la pintura de molduras interiores brillantes.
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
|
|
|
Karta :
|
APP N° 677
Param.:
|
INI:
|
|
Diferenciación de color de molduras interiores brillantes Se deben diferenciar por color las molduras interiores brillantes. El desafío aquí es el margen de tonos oscuros a claros.
Color differentiation of shiny interior trims
Shiny interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
|
|
|
Karta :
|
APP N° 676
Param.:
|
INI:
|
|
Color differentiation of matt interior trims
Matt interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
|
|
|
Karta :
|
APP N° 675
Param.:
|
INI:
|
|
Diferenciación de color de cubiertas de altavoz Se deben diferenciar por color las cubiertas de altavoz.
Color differentiation of loudspeaker covers
Loudspeaker covers should be color differentiated.
|
|
APP N° 674
INI:
|
|
Conteo de tapas de metal Se deben contar las tapas de metal en una pila.
Counting of metal lids
Metal lids should be counted in a stack.
|
|
|
Karta :
|
APP N° 673
|
Control de chorro de pulverización mediante un sistema de cortina de luz láser Se deben monitorizar la cantidad de chorro de pulverización y la geometría del chorro de pulverización muy próximas a la salida de la boquilla de pulverización.
Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.
|
|
|
Karta :
|
APP N° 672
Param.:
|
|
Control de presencia de una tapa fluorescente semitransparente en un recipiente de plástico blanco Se debe controlar la presencia de una tapa fluorescente semitransparente en una caja de plástico.
Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.
|
|
|
Karta :
|
APP N° 671
Param.:
|
|
Detección de la parte delantera y trasera de alfombras Se debe diferenciar la parte delantera de las alfombras de la parte trasera.
Backside-, frontside detection of carpets
The backside from a carpet should be differentiated from the frontside.
|
|
|
Karta :
|
APP N° 670
Param.:
|
|
Detección de línea de cola sobre papel de filtro de cigarrillo Se debe detectar una línea de cola sobre papel de filtro de cigarrillo. Al hacerlo, se debe asegurar que el adhesivo sea soluble.
Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.
|
|
|
Karta :
|
APP N° 669
Param.:
|
|
Detección de diferentes cápsulas de color en los filtros de cigarrillos Se deben detectar cápsulas de diferentes colores dentro de un cilindro del filtro de cigarrillo.
Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.
|
|
APP N° 668
Param.:
|
|
Diferenciación de fluorescencia de color de piezas interiores en el sector del automóvil Se deben diferenciar entre sí los componentes en el área interior del automóvil mediante fluorescencia de color.
Color-fluorescence differentiation of interior automotive components
Interior automotive parts should be color differentiated.
|
|
|
Karta :
|
APP N° 667
Param.:
|
|
Diferenciación de color de piezas interiores de cuero Se debe diferenciar el color de componentes del área interior del automóvil.
Color differentiation of leather interior components
Leather interior parts used in the automotive area should be color differentiated.
|
|
|
Karta :
|
APP N° 666
Param.:
|
|
Detección de la parte delantera y la trasera de hojas de papel laminado negro Se debe detectar la posición correcta de hojas de papel laminado negro. Al hacerlo, se debe asegurar de que la parte delantera disponga de un patrón rectangular estampado.
Frontside / backside detection of black laminated paper sheets
The correct direction of black laminated paper sheets should be detected. It should be noted, that the frontside is slightly marked with a rectangular pattern.
|
|
|
Karta :
|
APP N° 665
|
Detección de relieve en botellas de vidrio Se deben detectar los relieves en diferentes botellas de vidrio.
Relief detection on glass bottles
Reliefs on different glass bottles should be detected.
|
|
|
Karta :
|
APP N° 664
|
Diferenciación de ruedas dentadas Las ruedas dentadas no procesadas químicamente se deben diferenciar de las ruedas dentadas ennegrecidas.
Gear differentiation
Chemically non-treated gears should be distinguished from blackened gears.
|
|
|
Karta :
|
APP N° 663
Param.:
|
|
Control de presencia de una imagen de impresión fluorescente Se debe monitorizar la presencia de una imagen de impresión fluorescente.
Fluorescent print presence control
The presence of a fluorescent print on plastic film should be controlled.
|
|
|
Karta :
|
APP N° 662
Param.:
|
|
Control de chorros de pulverización extremadamente débiles Se debe monitorizar la presencia y la densidad de un chorro de pulverización extremadamente débil.
Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.
|
|
|
Karta :
|
APP N° 661
|
Medición del grosor de una malla de grafito Se debe determinar el grosor de un tejido de graffito.
Graphite fabric thickness measurement
The thickness of a graphite fabric should be measured.
|
|
|
Karta :
|
APP N° 660
Param.:
|
|
Detección del cordón de soldadura en un tubo de acero inoxidable Durante la rotación se debe detectar el cordón de soldadura en un manguito de acero inoxidable.
Welding line detection on stainless steel tubes
The welding line on stainless-steel tubes should be detected. At this, the stainless-steel tube is rotating.
|
|
|
Karta :
|
APP N° 659
|
Detección de imprimaciones diferentes Se deben detectar imprimaciones fluorescentes diferentes. Al hacerlo, se debe asegurar de que las imprimaciones se apliquen sobre una superficie negra.
Detection of different primers
Different, fluorescent primers should be detected. Here, the primers will be applied on a black surface.
|
|
|
Karta :
|
APP N° 658
Param.:
|
|
Detección de película de aceite sobre tiras de estampado Se debe detectar la presencia de capas de aceite sobre tiras de estampado. Especialmente después del lavado de las tiras de estampado se deben detectar lubricantes residuales sobre las mismas.
Oil film detection on metal stamping stripes
The presence of an oil film on metal stripes should be detected. Especially after the cleaning process remaining residues of lubricants must be recognized.
|
|
|
Karta :
|
APP N° 657
Param.:
|
INI:
|
|
Diferencia de color de esferas semitransparentes en manguitos de plástico transparentes Las esferas semitransparentes de color que se encuentren dentro de las secciones transparentes de barras de filtro se deben diferenciar por color.
Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.
|
|
|
Karta :
|
APP N° 656
Param.:
|
INI:
|
|
Control de color de esferas semitransparentes en manguitos de plástico transparentes Se debe monitorizar el color de las esferas de color semitransparentes que se encuentren en las secciones de manguitos de plástico transparente de barras de filtro.
Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.
|
|
|
Karta :
|
APP N° 655
Param.:
|
|
Medición del espesor de una capa adhesiva transparente sobre una película de plástico ópticamente transparente y fluorescente bajo luz UV Se debe medir el espesor de un pegamento transparente sobre una película de plástico transparente y fluorescente bajo la influencia de luz UV.
Thickness control of a transparent adhesive layer on a UV fluorescent transparent plastic film
The thickness of a transparent glue on a transparent but fluorescent plastic film should be measured.
|
|
|
Karta :
|
APP N° 654
Param.:
|
|
Detección de un revestimiento fluorescente sobre cuero negro Se debe detectar un espacio de 5 mm en un revestimiento fluorescente sobre una superficie de cuero negro.
Detection of fluorescent coating on black leather
A gap with a width of 5mm in the fluorescent coating on a black leather surface should be detected.
|
|
|
Karta :
|
APP N° 653
|
Evaluación de calidad de hojas Se debe determinar la calidad de las hojas mediante el comportamiento de fluorescencia.
Evaluation of the quality of leaves
The quality of leaves should be evaluated in using the fluorescent effect.
|
|
|
Karta :
|
APP N° 652
Param.:
|
|
Control de presencia de cordón adhesivo en componentes de plástico Se debe monitorizar la presencia de una línea de cola sobre una superficie de plástico negra.
Glue bead presence control on plastic components
The presence of adhesive on black plastic parts should be controlled.
|
|
|
Karta :
|
APP N° 651
Param.:
|
INI:
|
|
Control de presencia de una capa de imprimación sobre una superficie de plástico Se debe monitorizar la presencia de una capa de imprimación sobre un componente de plástico.
Presence control of a primer layer on a plastic component
A primer layer on a plastic surface should be detected.
|
|
|
Karta :
|
APP N° 650
Param.:
|
INI:
|
|
Control de posición de un tubo plano soldado de metal Se debe monitorizar la posición del cordón de soldadura de tubos planos. Al hacerlo, se debe asegurar de que el cordón de soldadura se encuentre abajo.
Correct positioning control of welded flat metal tubes
The position of a welding line on a flat tube should be controlled. At this, the welding line should be underneath.
|
|
|
Karta :
|
APP N° 649
|
Control de color de componentes de automóvil pintados Los componentes de automóvil pintados se deben someter a un control de color. Al hacerlo, se deben separar los componentes con diferentes colores de las piezas correctas.
Color control of automotive paints
Automotive paints should be color differentiated. At this, the correct parts should be separated from the incorrect parts.
|
|
|
Karta :
|
APP N° 648
Param.:
|
|
Medición de color de pinturas para automóviles Se debe controlar si el valor de color de la respectiva pintura para automóviles en relación al color de referencia correspondiente se encuentra dentro del rango de tolerancia de color dE permitido.
Color measurement of car paints
The color of car paints should be measured and controlled whether the respective color is inside a certain dE tolerance to the corresponding reference.
|
|
|
Karta :
|
APP N° 647
Param.:
|
INI:
|
|
Medición de color de placas de vidrio Se debe medir el color de placas de vidrio, teniendo en cuenta que la capa de vidrio opaca de color está cubierta por una capa de vidrio transparente y brillante. Sin embargo, el color solo se puede medir en la práctica a través de la capa de vidrio transparente evitando una influencia de la reflexión directa sobre el resultado de medición.
Color measurement of glass plates
The color of glass plates should be measured. It should be noted, that the colored opaque glass layer is covered from a transparent shiny glass layer and the color should be measured through the transparent glass layer. The challenge is, to avoid that the direct reflection from the surface of the transparent glass layer is influencing the color measurement result.
|
|
|
Karta :
|
APP N° 646
Param.:
|
|
Detección de marca de color de referencia sobre una lámina de aluminio impresa Se deben detectar marcas de color negro brillante sobre una lámina de aluminio negro mate y marcas de referencia de color naranja intenso sobre un fondo naranja.
Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.
|
|
|
Karta :
|
APP N° 645
Param.:
|
|
Detección de una marca de referencia de color en una lámina de aluminio Se debe detectar una marca de color sobre una lámina de aluminio.
Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.
|
|
APP N° 644
Param.:
|
INI:
|
|
Diferenciación de componentes interiores en el sector automovilístico Se deben diferenciar los diversos componentes interiores del sector automovilístico.
Differentiation of automotive interior components
Automotive interior components should be differentiated.
|
|
|
Karta :
|
APP N° 643
|
Control de nudo en cintas de plástico Se deben revisar las cintas de plástico en busca de posibles nudos.
Knot detection on plastic straps
Knots in plastic straps should be inline detected.
|
|
|
Karta :
|
APP N° 642
|
Control de revestimiento en placas de vidrio Se debe monitorizar el revestimiento de placas de vidrio.
Coating control on glass plates
The different coatings on glass plates should be color controlled.
|
|
|
Karta :
|
APP N° 641
Param.:
|
INI:
|
|
Inspección en línea de una junta de soldadura en tubos de acero inoxidable Deben detectarse en línea los defectos en la junta de soldadura de los tubos de acero inoxidable. El tubo de acero inoxidable se mueve a lo largo de la junta de soldadura.
Inline-control of welding line on stainless steel tubes
A welding line should be inline controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
|
|
|
Karta :
|
APP N° 640
Param.:
|
|
Detección de defectos de soldadura en tubos de acero inoxidable Deben detectarse defectos en la junta de soldadura de los tubos de acero inoxidable. El tubo de acero inoxidable se mueve a lo largo de la junta de soldadura.
Welding line control on stainless steel tubes
A welding line should be controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
|
|
|
Karta :
|
APP N° 639
Param.:
|
|
Detección de juntas de soldadura en tubos de acero inoxidable Debe ser detectada la posición de la junta de soldadura en tubos de acero inoxidable. Aquí se puede girar el tubo de acero inoxidable.
Welding line detection on stainless steel tubes
A welding line should be detected on stainless steel tubes. At this, the tube can be turned.
|
|
APP N° 638
Param.:
|
|
Control de color de molduras Se debe comprobar el color de las molduras.
Color control of trims
Trims should be color controlled.
|
|
APP N° 637
Param.:
|
INI:
|
|
Diferenciación entre componentes textiles y componentes interiores de Alcántara Debe distinguirse entre componentes textiles y componentes de Alcántara.
Differentiation of fabric and alcantara interior components
Fabric and alcantara interior components should be differentiated.
|
|
|
Karta :
|
APP N° 636
Param.:
|
INI:
|
|
Distinción de color de carcasas de espejos retrovisores Se debe controlar el color de carcasas de espejos retrovisores.
Color differentiation of rearview mirror housings
Rearview mirror housings should be color differentiated.
|
|
|
Karta :
|
APP N° 635
Param.:
|
INI:
|
|
Control de posición de tapas de plástico Se debe detectar la posición de tapas de plástico (correcta o boca abajo).
Direction control of plastic caps
The direction (upside or upside down) of plastic caps should be controlled.
|
|
APP N° 634
Param.:
|
|
Control de perlas de pegamento en papel impreso Sobre papel impreso se debem examinar rastros de pegamento en términos de presencia, cantidad y fallos.
Glue line control on printed paper
The presence, amount and gaps of a glue line on printed paper should be detected.
|
|
|
Karta :
|
APP N° 633
Param.:
|
INI:
|
|
Medición de cantidad de hollín en papel de filtro Se debe determinar la cantidad de hollín en un papel de filtro.
Soot quantity measurement on filter paper
The amount of soot on filter paper should be measured.
|
|
|
Karta :
|
APP N° 632
Param.:
|
INI:
|
|
Distinción de color de tubos de aluminio anodizado Se deben distinguir tubos de aluminio anodizado respecto al color.
Color differentiation of anodized aluminum tubes
Anodized aluminum tubes should be color differentiated.
|
|
|
Karta :
|
APP N° 631
Param.:
|
INI:
|
|
Distinción de color de perfiles de aluminio anodizado Se deben distinguir perfiles de aluminio anodizado respecto al color.
Color differentiation of anodized aluminum profiles
Anodized aluminum profiles should be color differentiated.
|
|
|
Karta :
|
APP N° 630
|
Distinción de color de aluminio anodizado Se deben distinguir piezas de aluminio anodizado.
Color differentiation of anodized aluminum components
Anodized aluminum components should be color differentiated.
|
|
|
Karta :
|
APP N° 629
|
Distinción de lado delantero del lado trasero de cintas de papel Se debe distinguir el lado trasero de cintas de papel amarillas o blancas del lado delantero de las respectivas cintas.
Front side – backside differentiation of paper web
The backside of yellow and white paper web should be differentiated from the respective front side.
|
|
|
Karta :
|
APP N° 628
|
Distinción del lado delantero de un papel de filtro recubierto unilateralmente de adhesivo del lado trasero no recubierto Se debe controlar si el lado frontal o posterior de un papel de filtro está arriba. Sólo el lado delantero tiene una capa adhesiva débilmente fluorescente.
Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.
|
|
|
Karta :
|
APP N° 627
|
Distinción de color entre piezas blancas y blancas metálicas Se deben distinguir piezas blancas y blancas metálicas.
Color differentiation between white and metallic white lacquered parts
White painted parts should be differentiated from metallic white lacquered components.
|
|
APP N° 626
|
Control de intensidad de aditivos fluorescentes en papel empapado en aceite Se debe supervisar la intensidad de aditivos fluorescentes en papel empapado en aceite.
Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
|
|
|
Karta :
|
APP N° 625
|
Detección de ranuras en tarjetas de plástico metalizadas Se debe detectar una ranura en una tarjeta de plástico metalizada.
Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.
|
|
|
Karta :
|
APP N° 624
|
Distinción de colores de componentes interiores Se deben distinguir partes interiores del área automotriz.
Color Differentiation of interior components
Automotive interior components should be color differentiated at a big distance.
|
|
|
Karta :
|
APP N° 623
|
Gap detection of fluorescent coating on plastic band
A gap inside fluorescent coating on a plastic ribbon should be detected.
|
|
|
Karta :
|
APP N° 622
|
La detección de una costura fluorescente en una alfombra Se debe detectar una costura fluorescente en una alfombra bajo la acción de luz UV.
Fluorescent thread detection on carpets
A fluorescent seam should be detected on carpet.
|
|
|
Karta :
|
APP N° 621
|
Distinción de componentes interiores de madera y a base de carbono Se deben distinguir unos de otros componentes de madera y de fibra de carbono.
Differentiation of wooden and carbon based interior components
Wooden and carbon based interior components should be differentiated.
|
|
|
Karta :
|
APP N° 620
|
Control de color de tubos de acero Se deben distinguir tubos de acero inoxidable pintados de azul de los no pintados.
Color control of stainless steel tubes
Blue painted stainless steel tubes should be differentiated from uncolored tubes.
|
|
|
Karta :
|
APP N° 619
|
Medición de color de textiles Se deben supervisar textiles de color verde y verde oliva respecto al color.
Color measurement of fabrics
Green and olive fabrics should be color controlled.
|
|
|
Karta :
|
APP N° 618
|
Distinción de color de costuras detrás de una funda de lámina plástica transparente Se deben controlar componentes con costuras de colores diferentes.
Color differentiation of threads through shiny transparent plastic film
Components with different colored threads should be differentiated.
|
|
APP N° 617
Param.:
|
|
Medición de la humedad de granulado de plástico Se debe terminar el contenido de agua de granulado de plástico.
Moisture control of plastic pellets
The very low water content of plastic pellets should be measured.
|
|
|
Karta :
|
APP N° 616
|
Distinción del color de muelles helicoidales metálicos Se deben separar muelles helicoidales metálicos por color. La distancia de control no debe ser inferior a 100 mm.
Color differentiation of metal springs
Metal springs should be color differentiated at a distance of 100mm.
|
|
|
Karta :
|
APP N° 615
Param.:
|
INI:
|
|
Distinción entre componentes interiores en el área automotriz Se deben distinguir componentes interiores en el área automotriz.
Color differentiation of interior automotive components
Interior components should be color differentiated.
|
|
APP N° 614
|
Distinción entre componentes de cuero e imitación de cuero en interiores Deben distinguirse componentes de cuero e imitación de cuero en interiores.
Differentiation of leather and leather imitation interior parts
Leather interior parts should be differentiated from leather imitation interior components.
|
|
|
Karta :
|
APP N° 613
|
Medición de distancia en parabrisas de coche tintados Se debe determinar la distancia a parabrisas de coche tintados usando un sistema de medición sin contacto. Se debe tener en cuenta que según el punto de medición, puede haber poco espacio, ya que la distancia debe medirse simultáneamente en varios lugares del vidrio.
Distance measurement to colored car glass
The distance to colored car glass should be measured. It has to be taken into account, that due to the fact, that several measuring points at the glass surface are necessary, the space for the respective measurement device, especially the frontend is limited.
|
|
|
Karta :
|
APP N° 612
|
Examen de los componentes lacados respecto a brillo y velo Se deben controlar componentes lacados respecto a diferencias de brillo y velo.
Investigation of lacquered components in regards to gloss and haze
Lacquered components should be controlled in regards to gloss and haze.
|
|
|
Karta :
|
APP N° 611
|
Medición de color de dos paneles de plexiglás transparentes de colores diferentes Se deben medir respecto al color un panel de acrílico transparente ligeramente azulado y otro de color ligeramente amarillento.
Color measurement of two different colored transparent Plexiglas sheets
A slightly blueish and a slightly yellowish colored transparent acrylic glass sheet should be color measured.
|
|
|
Karta :
|
APP N° 610
Param.:
|
|
Medición de color de cables recubiertos de cobre Se debe medir el color de cables recubiertos de cobre.
Color measurement of copper coated wires
The color of copper anodized wires should be measured.
|
|
|
Karta :
|
APP N° 609
Param.:
|
|
Seguimiento de borde de pegamento en una lámina de plástico transparente Se debe detectar el borde de un pegamento en una lámina de plástico transparente.
Glue line edge tracing on transparent plastic film
The edge of a glue line on a transparent plastic film should be detected.
|
|
|
Karta :
|
APP N° 608
Param.:
|
|
Distinción de color de cajas acústicas de un vehículo Se deben distinguir cajas acústicas de un vehículo respecto al color.
Color differentiation of automotive loudspeaker housings
The color of automotive loudspeaker housings should be controlled.
|
|
|
Karta :
|
APP N° 607
Param.:
|
|
Seguimiento continuo de un borde en relieve sobre papel duro Se debe seguir continuamente un borde en relieve sobre papel duro.
Continuous edge pursuit on embossed paper
The edge on embossed paper should be traced.
|
|
|
Karta :
|
APP N° 606
Param.:
|
|
Medición de color de piezas de plástico semitranslúcido Se debe medir el color de componentes de plástico semitranslúcido.
Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
|
|
|
Karta :
|
APP N° 605
Param.:
|
|
Medición de color de telas estampadas en rojo y negro Se debe medir el color de telas estampadas en rojo y negro.
Color measurement of red-black patterned fabrics
The color of red-black patterned fabrics should be measured.
|
|
|
Karta :
|
APP N° 604
Param.:
|
|
Medición de color de una tela de color azul grisáceo Se debe medir el color de una tela de color azul grisáceo.
Color measurement of gray-blue fabrics
The color of gray-blue fabrics should be measured.
|
|
|
Karta :
|
APP N° 603
Param.:
|
|
Medición de color de una tela estampada en naranja y negro Se debe medir una tela estampada en naranja y negro respecto al color.
Color measurement of orange fabrics
The color of orange – black patterned textiles should be measured.
|
|
|
Karta :
|
APP N° 602
Param.:
|
|
Medición de color de piezas de plástico Se deben medir piezas de plástico respecto al color.
Color measurement of plastic parts
The color of plastic parts should be measured.
|
|
|
Karta :
|
APP N° 601
Param.:
|
|
Distinción de diversas piezas de metal túrbido Se deben detectar piezas de metal con distinta turbidez de superficie.
Differentiation of diverse hazy metal parts
Diverse hazy metal components should be differentiated.
|
|
|
Karta :
|
APP N° 600
Param.:
|
|
Medición de color de pellets de plástico transparente Se deben supervisar pellets de plástico transparente con respecto al color. En particular, se debe controlar la coloración amarillenta.
Color measurement of transparent plastic pellets
Transparent plastic pellets should be color controlled and especially the yellowing should be detected.
|
|
|
Karta :
|
APP N° 599
Param.:
|
|
Control de presencia de una franja de plástico transparente Se debe supervisar la presencia de una franja de borde de plástico transparente.
Presence control of a transparent plastic film
The presence of a transparent edge strip should be controlled.
|
|
|
Karta :
|
APP N° 598
Param.:
|
INI:
|
|
Control de colores Se debe supervisar el color de una llama.
Color control of flames
The color of a flame should be controlled.
|
|
|
Karta :
|
APP N° 597
Param.:
|
|
Detección de una línea negra sobre un fondo blanco a gran distancia Se debe detectar una línea negra sobre un fondo blanco a una distancia relativamente grande.
Black line detection on white background at a big distance
A black line on a white background should be detected at a big distance.
|
|
|
Karta :
|
APP N° 596
Param.:
|
INI:
|
|
Distinción entre piezas metálicas mate y brillantes Se debe distinguir entre piezas metálicas mate y brillantes.
Differentiation of matt and shiny metal parts
Matt metal components should be differentiated from shiny metal parts.
|
|
|
Karta :
|
APP N° 595
Param.:
|
INI:
|
|
Distinción de la parte delantera de la parte trasera de lonas de camiones Se debe distinguir la parte delantera de la parte trasera de lonas de camiones.
Differentiation of front side and backside of canvas
The front side of canvas should be differentiated from the backside.
|
|
APP N° 594
Param.:
|
|
Control de presencia de etiquetas de plástico transparente en los paquetes de cigarrillos Se debe supervisar la presencia de etiquetas de plástico transparentes en paquetes de cigarrillos.
Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.
|
|
|
Karta :
|
APP N° 593
Param.:
|
INI:
|
|
Distinción de color de componentes para interiores de automóvil Se deben distinguir piezas para interiores de automóviles respecto al color.
Color differentiation of automotive interior parts
Automotive components used in the interior field should be color differentiated.
|
|
APP N° 592
Param.:
|
|
Control de humedad de pellets de madera Se debe supervisar el contenido de humedad de pellets de madera.
Moisture control of wood pellets
The moisture of wood pellets should be controlled.
|
|
|
Karta :
|
APP N° 591
Param.:
|
|
Control de humedad de lentejas Se debe supervisar el contenido de humedad de lentejas.
Moisture control of lentils
The moisture of lentils should be controlled.
|
|
|
Karta :
|
APP N° 590
Param.:
|
|
Control de humedad de nueces ralladas Se debe controlar el contenido de humedad de nueces ralladas.
Moisture control of grinded nuts
The moisture of grinded nuts should be controlled.
|
|
|
Karta :
|
APP N° 589
Param.:
|
|
Control de humedad de trigo Se debe controlar el contenido de humedad de trigo.
Moisture control of wheat
The moisture of wheat should be controlled.
|
|
|
Karta :
|
APP N° 588
Param.:
|
|
Control de humedad de arroz Se debe controlar el contenido de humedad de arroz.
Moisture control of rice
The moisture of rice should be controlled.
|
|
APP N° 587
Param.:
|
|
Control de humedad de ladrillos Se debe controlar el contenido de humedad de ladrillos.
Moisture control of bricks
The moisture of bricks should be controlled.
|
|
APP N° 586
Param.:
|
|
Control de la humedad de ladrillos clínker Se debe monitorizar el contenido de humedad de ladrillos clínker.
Moisture control of clinker bricks
The moisture of clinker bricks should be controlled.
|
|
APP N° 585
Param.:
|
|
Control de humedad de bloques de hormigón Se debe monitorizar el contenido de humedad de bloques de hormigón.
Moisture control of concrete blocks
The moisture of concrete blocks should be controlled.
|
|
APP N° 584
Param.:
|
|
Control de humedad de hormigón celular Se debe monitorizar el contenido de humedad de hormigón celular.
Moisture of gas concrete
The moisture of gas concrete should be controlled.
|
|
APP N° 583
Param.:
|
|
Control de humedad de papel Se debe supervisar el contenido de humedad de papel.
Moisture control of paper
The moisture of paper should be controlled.
|
|
APP N° 582
Param.:
|
|
Control de humedad de textiles Se debe monitorizar el contenido de humedad de textiles.
Moisture control of fabrics
The moisture of textiles should be controlled.
|
|
APP N° 581
Param.:
|
|
Control de humedad de madera Se debe controlar el contenido de humedad de madera.
Moisture control of timber
The moisture of timber should be controlled.
|
|
|
Karta :
|
APP N° 580
Param.:
|
|
Detección de bordes de vasos Se debe detectar el borde de vasos de plástico.
Edge detection on plastic cups
The rims of stacked plastic cups should be detected.
|
|
|
Karta :
|
APP N° 579
Param.:
|
|
Detección de defectos en vidrios planos Se deben detectar arañazos y descamados en vidrios redondos.
Defect detection on glass plates
Defects, like scratches and splintering of cutting edges on glass discs should be detected.
|
|
|
Karta :
|
APP N° 578
Param.:
|
INI:
|
|
Lacado de automóvil - Control de color Se deben distinguir lacas de automóviles respecto al color.
Car finish color control
Car finish colors should be controlled.
|
|
|
Karta :
|
APP N° 577
Param.:
|
INI:
|
|
Detección de presencia de capa adhesiva en una cinta de papel Se debe monitorizar la presencia de una capa adhesiva en una cinta de papel.
Adhesive layer presence detection on paper web
The presence of an adhesive layer on paper web should be controlled.
|
|
|
Karta :
|
APP N° 576
Param.:
|
INI:
|
|
Detección de marcas de agua en papel de seguridad Se deben detectar marcas de agua en papel de seguridad.
Watermark detection on safety paper
Water reference marks should be detected on safety paper.
|
|
|
Karta :
|
APP N° 575
Param.:
|
INI:
|
|
Distinción de color de anillos metálicos Se deben distinguir anillos de metal respecto al color.
Color differentiation of metal rings
Metal rings should be color differentiated.
|
|
|
Karta :
|
APP N° 574
Param.:
|
INI:
|
|
Detección de cinta adhesiva en láminas de plástico Se debe detectar cinta adhesiva en láminas de plástico.
Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.
|
|
|
Karta :
|
APP N° 573
Param.:
|
INI:
|
|
Detección de área de solapamiento en tubos de metal perforados Se debe detectar un área de solapamiento en tubos de metal perforados.
Overlap joint detection on perforated metal tubes
The overlapping area on perforated metal tubes should be detected.
|
|
|
Karta :
|
APP N° 572
Param.:
|
|
Detección de pegado en paquetes de cigarrillos Se debe monitorizar la presencia de pegado en paquetes de cigarrillos.
Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.
|
|
|
Karta :
|
APP N° 571
Param.:
|
|
Distinción de filtros de cigarrillo Se deben distinguir segmentos de filtros de cigarrillos.
Cigarette filter differentiation
Cigarette filter segments should be differentiated.
|
|
|
Karta :
|
APP N° 570
Param.:
|
|
Detección de oquedades en filtros de cigarrillos Se deben detectar oquedades en filtros de cigarrillos
Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.
|
|
|
Karta :
|
APP N° 569
Param.:
|
|
Control de posición de cuello de botella Se debe medir la altura del cuello de botella.
Bottle neck height control
The height of the bottle neck should be measured.
|
|
|
Karta :
|
APP N° 568
Param.:
|
|
Posicionamiento de botellas de vidrio Se deben posicionar botellas de vidrio.
Glass bottle positioning
Glass bottles should be positioned.
|
|
|
Karta :
|
APP N° 567
Param.:
|
INI:
|
|
Distinción de color de vidrio plano Se debe distinguir vidrio plano respecto a color.
Color differentiation of flat glasses
Flat glasses should be color differentiated.
|
|
|
Karta :
|
APP N° 566
Param.:
|
|
Detección de costura de soldadura en el interior de un tubo En el lado interior de un tubo se debe detectar una costura de soldadura durante la rotación.
Inner tube welding line detection
The welding line of an inner tube should be detected during rotation.
|
|
|
Karta :
|
APP N° 565
|
Distinción de color de piezas de plástico en interiores de automóviles Se deben distinguir piezas de plástico en interiores de automóviles respecto al color.
Color differentiation of plastic automotive interior components
Automotive interior plastic parts should be color differentiated.
|
|
|
Karta :
|
APP N° 564
Param.:
|
INI:
|
|
Control de color y presencia de una junta elástica en una placa de madera contrachapada Se deben monitorear el color y la presencia de una junta elástica en una placa de madera contrachapada.
Joint sealing color control on fiber boards
The color as well as the presence of the joint sealing of fiber boards should be detected.
|
|
|
Karta :
|
APP N° 563
Param.:
|
INI:
|
|
Control del color de cebollas tostadas Se deben examinar cebollas tostadas respecto a diferencias de color.
Color control of roasted onions
Roasted unions should be color controlled.
|
|
|
Karta :
|
APP N° 562
Param.:
|
|
Detección de una superficie adhesiva en un material de soporte de papel o textil Se debe monitorizar la presencia de una superficie adhesiva en papel o tela.
Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.
|
|
|
Karta :
|
APP N° 561
Param.:
|
INI:
|
|
Medición del color de componentes de plástico Se deben medir piezas de plástico respecto al color.
Color measurement of plastic components
Plastic components should be color measured
|
|
APP N° 560
Param.:
|
|
Control de presencia de una capa absorbente de luz UVC en una lámina de plástico transparente Se debe controlar la presencia de una capa absorbente de luz UVC en láminas de plástico transparentes.
Detection of an UVC absorbing coating on transparent plastic film
UVC absorbing coating should be detected on transparent plastic films.
|
|
|
Karta :
|
APP N° 559
Param.:
|
INI:
|
|
Control de presencia de una capa fluorescente en una junta de goma Se debe monitorizar la presencia de una capa fluorescente en una junta de goma.
Presence control of fluorescent coating
The presence of a fluorescent coating on rubber seal should be controlled.
|
|
|
Karta :
|
APP N° 558
Param.:
|
|
Detección de oquedades en los empalmes de etiquetas transparentes Se deben detectar oquedades en empalmes de etiquetas transparentes.
Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
|
|
|
Karta :
|
APP N° 557
Param.:
|
INI:
|
|
Distinción de cuero negro, imitación de cuero y alcántara Se deben distinguir unos de otros componentes de cuero, imitación de cuero y alcántara negros para interiores.
Differentiation of black leather, leather imitation and alcantara components
Black leather interior components should be distinguished from black leather imitation as well as alcantara material.
|
|
|
Karta :
|
APP N° 556
Param.:
|
|
Distinción de color de hilos textiles Se deben supervisar diferentes hilos de color, utilizados para coser cuero, en máquinas de coser.
Color differentiation of threads
Different colored threads, used for sewing leather together, should be controlled on sewing machines.
|
|
|
Karta :
|
APP N° 555
|
Medición de distancia de placas de fibra de carbono Se debe medir la distancia de paneles de fibra de carbono.
Distance measurement on carbon fiber plates
The distance to carbon fiber plates should be measured.
|
|
|
Karta :
|
APP N° 554
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico brillantes Se deben distinguir piezas de plástico brillantes para uso interior respecto al color.
Color differentiation of shiny plastic parts
Shiny plastic components, used for the interior automotive field, should be color differentiated.
|
|
|
Karta :
|
APP N° 553
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico mate Se deben distinguir componentes de plástico mate para interiores respecto al color.
Color differentiation of matt plastic interior components
Matt plastic parts, used for the automotive interior field, should be color differentiated.
|
|
|
Karta :
|
APP N° 552
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico de color beige en el ámbito interior Se deben distinguir piezas de plástico de color beige, que se utilizan en el interior del automóvil, respecto a su color.
Color differentiation of beige interior plastic parts
Beige plastic parts, which are used in the automotive interior field, should be color differentiated.
|
|
|
Karta :
|
APP N° 551
Param.:
|
|
Determinación del peso por unidad de superficie de tintas de impresión Se debe controlar el peso por unidad de superficie de tintas, aplicadas a placas MDF o HDF. Se ha encontrado que existe una relación lineal entre los valores de color siM, determinados en el rodillo de impresión y el peso por unidad de superficie de la tinta en la placa. Sin embargo, el factor de proporcionalidad depende del color elegido.
Lacquer surface weight control
The lacquer surface weight on furniture plates should be controlled. Investigations have shown that there is a proportional relation between the color space siM - parameters of the liquid paint on the pressing roll and the surface weight of the lacquer on the panel. However, the proportionality factor is dependent of the color and has to be calibrated for the respective paint.
|
|
|
Karta :
|
APP N° 550
|
Medición de distancia en una lámina de caucho negra Se debe medir la distancia a una lámina de caucho. Debe tenerse en cuenta que la superficie del material puede cambiar de negro mate a negro brillante.
Distance measurement to black rubber band
The distance to a black rubber band should be measured. It has to be taken into account, that the surface of the rubber band can change from black matt to black shiny.
|
|
|
Karta :
|
APP N° 549
Param.:
|
|
Medición del brillo de láminas de plástico transparente Se deben examinar láminas de plástico transparentes respecto al grado de brillo. Se debe controlar tanto el lado delantero como el trasero.
Gloss measurement of transparent plastic films
The gloss factor of different transparent plastic films should be measured on both sides.
|
|
|
Karta :
|
APP N° 548
Param.:
|
INI:
|
|
Control de recubrimiento de superficies de junta de rótula Se deben monitorizar superficies de juntas de rótula. Se debe distinguir entre superficies no recubiertas, recubiertas y "azules"
Ball joint coating control
The joint ball surface should be controlled with a view to the coating. At this, uncoated joint balls should be differentiated from coated and blue coated joint balls.
|
|
|
Karta :
|
APP N° 547
Param.:
|
INI:
|
|
Detección de perforaciones en tiras de plástico transparente Se deben detectar perforaciones en tiras de plástico transparente.
Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
|
|
|
Karta :
|
APP N° 546
Param.:
|
INI:
|
|
Distinción de placas HDF Se deben separar una de otras placas HDF procesadas de forma diferente. Mientras que un tipo de placas se procesaron solamente con papel de lija, el segundo tipo está revestido con una laca UV y en el tercero, esta laca UV fue embastada con papel de lija.
Differentiation of High Density Fiberboards (HDF-boards)
Treated High Density Fiberboards should be differentiated. At this, one board is wood sanded, the 2nd board is wood sanded with first sealer and the 3rd board is wood sanded with first sealer and lacquer sanded.
|
|
|
Karta :
|
APP N° 545
Param.:
|
INI:
|
|
Control de dos tubos de plástico en la parte interior Se deben distinguir tubos de plástico respecto al acabado de la superficie del lado interior
Differentiation of the inner surface of plastic tubes
The inner surface of plastic tubes should be controlled.
|
|
|
Karta :
|
APP N° 544
Param.:
|
INI:
|
|
Distinción de manillas de puerta lacadas Se deben distinguir manillas de puertas lacadas respecto al color.
Lacquered door handle color control
The color of varnished door handles should be controlled.
|
|
|
Karta :
|
APP N° 543
Param.:
|
INI:
|
|
Control de color de piezas de plástico lacadas Se deben distinguir componentes de plástico pintados respecto al color.
Color differentiation of painted plastic components
Plastic parts should be color differentiated. For this purpose, a color sensor type SPECTRO-3-100-COF-d6.0-CL is used.
|
|
|
Karta :
|
APP N° 542
Param.:
|
INI:
|
|
Se debe monitorizar la permeabilidad óptica de distintas placas de vidrio. Se deben distinguir manillas de puertas metalizadas respecto al color.
Differentiation of metalized door handles
Metalized door handles should be color differentiated.
|
|
|
Karta :
|
APP N° 541
|
Control de transmisión óptica de diferentes placas de vidrio Se debe monitorizar la permeabilidad óptica de distintas placas de vidrio.
Optical transmission control of different glass plates
The transmission of different glass plates should be controlled.
|
|
|
Karta :
|
APP N° 540
Param.:
|
|
Control de velo de chapas de acero inoxidable Se debe monitorizar el velo de superficies de acero inoxidable.
Haze control of stainless steel plates
The haze of stainless steel surfaces should be controlled.
|
|
|
Karta :
|
APP N° 539
|
Control de presencia de un adhesivo fluorescente líquido en una cavidad Se debe controlar la presencia de un adhesivo fluorescente líquido en una cavidad.
Presence control of liquid fluorescent glue in a hole
The presence of fluorescent liquid glue in a hole should be controlled.
|
|
|
Karta :
|
APP N° 538
Param.:
|
INI:
|
|
Control de la banda de rodadura de ruedas dentadas Se debe controlar la banda de rodadura de ruedas dentadas respecto a defectos de superficie.
Control of the contact surface of gear wheels
The contact surface of gear wheels should be controlled.
|
|
|
Karta :
|
APP N° 537
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico en el ámbito interior Se deben distinguir componentes de plástico en el ámbito interior respecto al color.
Color differentiation of interior plastic parts
Plastic parts, which are used in the automotive interior field, should be color differentiated
|
|
|
Karta :
|
APP N° 536
Param.:
|
INI:
|
|
Control de presencia de una película de silicona en una pieza de plástico Se debe controlar la presencia de una capa de silicona en un componente de plástico.
Detection of silicone oil film on plastic components
The presence of silicon oil should be controlled on the surface of plastic components.
|
|
|
Karta :
|
APP N° 535
Param.:
|
INI:
|
|
Control de anillos de color en jeringas Se debe controlar el color de marcas de color en jeringas.
Color mark control on syringes
The color of the mark on syringes should be controlled.
|
|
|
Karta :
|
APP N° 534
Param.:
|
|
Distinción de eslabones de cadena de metal Se tienen que distinguir eslabones de cadena en términos de espesor. El espesor de una parte es de 2,0 mm de ese modo, mientras que la otra parte tiene un espesor de 2,3 mm.
Differentiation of metal chain links
Metal chain links should be differentiated by thickness. The thickness of the one size is 2.0mm, whereas the other size has a thickness of 2.3mm.
|
|
|
Karta :
|
APP N° 533
Param.:
|
|
Detección de marcas por vibración en tiras de metal Se deben marcar los defectos en tiras bimetálicas por medio de marcas de vibración. Durante el procesamiento, las marcas se deben detectar de forma fiable, de modo que las partes defectuosas de las tiras metálicas se puedan eliminar más tarde.
Detection of chatter marks on metal bands
Defects inside bimetallic bands will be marked with chatter marks. These chatter marks should be proper detected during the further processing and the damaged part of the metal stripes should be removed from the finishing later on
|
|
APP N° 532
Param.:
|
INI:
|
|
Se deben reconocer marcas de referencia holográficas. Debe tenerse en cuenta que tanto las marcas reflectantes verdes como las rojas deben detectarse con la misma configuración. Se deben distinguir distintas piezas de cuero, alcántara y textiles del ámbito interior respecto a color y estructura.
Differentiation of automotive interior parts
Interior parts used in the automotive industry should be differentiated
|
|
|
Karta :
|
APP N° 531
Param.:
|
|
Detección de marcas de referencia holográficas Se deben reconocer marcas de referencia holográficas. Debe tenerse en cuenta que tanto las marcas reflectantes verdes como las rojas deben detectarse con la misma configuración.
Detection of holographical reference marks
Holographic reference marks should be detected. There are red as well as green reflecting reference marks which should be detected with the same adjustment.
|
|
|
Karta :
|
APP N° 530
Param.:
|
|
Durante la producción se debe medir inline el color de una banda de papel. Se debe observar que en el entorno en que se debe medir, la temperatura y la humedad son muy altas. Se debe detectar el color de costuras de diferentes componentes de cuero.
Seam color detection on leather automotive interior components
The color of the seam on leather components should be controlled
|
|
|
Karta :
|
APP N° 529
|
Medición de color inline de una banda de papel Durante la producción se debe medir inline el color de una banda de papel. Se debe observar que en el entorno en que se debe medir, la temperatura y la humedad son muy altas.
Inline color measurement of paper web
The color of a paper web should be measured inline. It has to be taken into account, that the ambient temperature as well as the humidity is very high at the place where the paper web should be color measured.
|
|
|
Karta :
|
APP N° 528
Param.:
|
INI:
|
|
Distinción de color de cinturones de seguridad Se deben controlar cinturones de seguridad respecto al color.
Color differentiation of safety seat belts
Seat belts should be color controlled and differentiated.
|
|
|
Karta :
|
APP N° 527
|
Gloss differentiation of coated flagstones from uncoated flagstones
Coated flagstones should be differentiated from uncoated flagstones.
|
|
|
Karta :
|
APP N° 526
Param.:
|
INI:
|
|
Distinción de imitaciones de cuero En interiores de la industria del automóvil se deben distinguir imitaciones de cuero de distintos colores.
Color differentiation of leather imitations
Leather imitations in the interior automotive field should be color differentiated.
|
|
|
Karta :
|
APP N° 525
Param.:
|
INI:
|
|
Distinción de color de rejillas de altavoces Se debe distinguir el color de rejillas de altavoces.
Color differentiation of loudspeaker grids
The color of loudspeaker grids should be differentiated.
|
|
|
Karta :
|
APP N° 524
Param.:
|
INI:
|
|
Distinción de color y brillo en componentes interiores negros Se deben distinguir imitaciones de cuero negro de componentes textiles negros y piezas de plástico negras desnudas en interiores de la industria del automóvil.
Color-gloss differentiation of black interior parts
Black leather imitation components from the automotive interior field should be differentiated from black fabric as well as from black plain plastic parts.
|
|
|
Karta :
|
APP N° 523
Param.:
|
INI:
|
|
Distinción entre alcántara y telas textiles en piezas interiores Se deben distinguir materiales alcántara y textiles de distinto color.
Differentiation of alcantara and fabric interior components
Different colored alcantara and fabric interior components for the automotive industry should be distinguished.
|
|
|
Karta :
|
APP N° 522
Param.:
|
|
Medición de color de azulejos esmaltados Se debe medir inline el color de los azulejos esmaltados.
Color measurement of glazed tiles
The color of glazed tiles should be inline measured.
|
|
|
Karta :
|
APP N° 521
|
Medición de brillo de chapas de aluminio anodizado Se debe medir inline el brillo de distintas chapas de aluminio.
Gloss measurement of anodized guide rails
The gloss of anodized aluminum guide rails should be inline measured.
|
|
|
Karta :
|
APP N° 520
Param.:
|
INI:
|
|
Medición de color de perfiles de aluminio anodizado Se debe medir inline el color de perfiles de aluminio anodizado.
Color measurement of anodized aluminum stripes
The color of anodized aluminum stripes should be measured inline.
|
|
|
Karta :
|
APP N° 519
|
Control de calidad de ventanas de plástico plano-paralelas transparentes Se deben supervisar chapitas de plástico respecto a la calidad óptica. Así mismo se deben separar las chapitas con defectos de aberraciones ópticas.
Quality control of transparent plastic plates
Transparent plastic plates should be quality controlled. The parts with a high optical quality should be differentiated from components with optical aberration failures.
|
|
|
Karta :
|
APP N° 518
Param.:
|
INI:
|
|
Medición de color de granulado de plástico reciclado Se debe supervisar granulado de plástico respecto al color. Se debe observar que la posición de los gránulos individuales puede detrás de la mirilla de vidrio, de modo que un tamaño mayor del spot sería beneficioso para obtener un valor de color medio significativo. Además, debe tenerse en cuenta que las temperaturas cerca de la mirilla son alrededor de 120 ° C.
Color measurement of recycled plastic pellets
The color of recycled plastic pellets should be measured. It has to be taken into account, that the position of the pellets behind the inspection glass can vary, thus a big light spot has a certain advantage to get a proper average measurement value. Furthermore, it should be considered, that the ambient temperature around the inspection glass can reach 120°C.
|
|
|
Karta :
|
APP N° 517
Param.:
|
INI:
|
|
Supervisión de concentración de un pasivante en una solución Se debe controlar la cantidad de pasivante en una solución.
Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
|
|
|
Karta :
|
APP N° 516
Param.:
|
INI:
|
|
Control de presencia de hilos fluorescentes en un pañal durante la producción Se debe supervisar la presencia de hilos fluorescentes en pañales durante la producción.
Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
|
|
|
Karta :
|
APP N° 515
Param.:
|
INI:
|
|
Control de recubrimiento en la parte frontal de condensadores de película Se debe supervisar la parte frontal de condensadores de película respecto a la presencia de un doble revestimiento.
Coating control at the front side of film capacitors
The double coating at the front side of film capacitors should be controlled.
|
|
|
Karta :
|
APP N° 514
Param.:
|
INI:
|
|
Control de masa de sellado en carcasas de condensadores Se debe supervisar la cobertura correcta del condensador por medio de la masa de sellado.
Casting compound control at capacitor housings
The casting compound of capacitor housings should be controlled.
|
|
|
Karta :
|
APP N° 513
Param.:
|
INI:
|
|
Detección de marcas de color en cartuchos de plástico Se debe detectar una marca de color verde en un fondo ranurado de un cartucho de plástico blanco. Se debe observar que la marca verde en parte ya no está presente.
Color mark detection on a plastic cartridge
A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched.
|
|
|
Karta :
|
APP N° 512
Param.:
|
INI:
|
|
Control de presencia de agujeros en un tubo de catéter Se debe supervisar la presencia de agujeros en catéteres.
Hole presence control on catheter tubes
The presence of holes on catheter tubes should be controlled.
|
|
|
Karta :
|
APP N° 511
Param.:
|
INI:
|
|
Control de presencia de un redondeo en un catéter Se debe supervisar la presencia de un redondeo en un catéter.
Catheter dome presence control
The presence of a dome at the end of a catheter should be controlled.
|
|
|
Karta :
|
APP N° 510
|
Medición de grado de brillo de láminas de plástico semitransparentes Se debe medir inline el nivel de brillo de láminas de plástico.
Gloss measurement of translucent plastic films
The gloss level of semi-transparent plastic films should be inline measured.
|
|
|
Karta :
|
APP N° 509
|
Distinción de color de tapas de plástico en sujetadores de bebidas Se deben distinguir, ya instaladas, tapas de plástico negras de otras marrón oscuro.
Color differentiation of flaps in cup holders
Black flaps should be color differentiated from dark brown flaps. During the tests the flaps are already integrated into the cup holder.
|
|
|
Karta :
|
APP N° 508
|
Detección de muescas en amortiguadores Se debe examinar la presencia de una muesca brillante en un amortiguador.
Notch presence detection on a shock absorber
A notch on a metal shock absorber should be detected. It has to be taken into account, that the notch is very shiny.
|
|
|
Karta :
|
APP N° 507
Param.:
|
INI:
|
|
Distinción de color y estructura de componentes interiores de automóviles En la práctica, se puede obtener una separación prolija de la mayoría de los componentes interiores por medio de la diferencia entre color y brillo. Sin embargo, se ha comprobado que, especialmente en la separación entre materiales alcántara, por un lado, y textiles por otro lado, las diferencias no son suficientes, por lo que los componentes también deben ser examinados respecto a la estructura.
Color and structure differentiation of automotive interior components
In practice, a proper color-gloss differentiation between most of the interior components can be realized, however, it has to be taken into account, that the difference in gloss as well as in color between the fabrics and the alcantara components is small, thus the structure difference should be used to differentiate even those products.
|
|
|
Karta :
|
APP N° 506
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico lacadas Se deben distinguir componentes de plástico, como las usadas en el interior de automóviles, según el color.
Color differentiation of painted plastic components
Painted plastic components used for the interior automotive area should be color differentiated.
|
|
|
Karta :
|
APP N° 505
Param.:
|
INI:
|
|
Control de presencia de un grabado láser en una botella de vidrio Se deben supervisar la presencia y la intensidad de un grabado por láser en el cuello de botellas de vidrio.
Presence control of a laser engraving on a glass bottle
The presence as well as the intensity of a laser engraving on glass bottles should be controlled.
|
|
|
Karta :
|
APP N° 504
Param.:
|
|
Control de espesor de pared de piezas de plástico Se debe medir el espesor de pared de piezas de plástico. Se debe observar que la transmitancia de luz de piezas de plástico se correlaciona con su espesor de pared.
Wall thickness control of semitransparent plastic components
The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts.
|
|
|
Karta :
|
APP N° 503
Param.:
|
|
Control de la altura de losas de piedra Se debe controlar el espesor de losas durante el transporte sobre una cinta. La variación de la altura, debido a la cinta transportadora, se puede dejar de lado, de tal forma que puede servir como referencia.
Stone plate thickness control
The thickness of stone plates should be measured. At this, the stone plates will be transported on a conveyor belt with a negligible movement in height, thus it can be used as a reference.
|
|
|
Karta :
|
APP N° 502
Param.:
|
INI:
|
|
Control de presencia de una película de plástico semitransparente sobre una chapa de metal Se debe supervisar la presencia de una franja de plástico semitransparente azulada en una chapa de metal.
Presence control of a semitransparent plastic film on a metal sheet
A semitransparent light blue plastic film should be detected on a metal sheet.
|
|
|
Karta :
|
APP N° 501
Param.:
|
INI:
|
|
Distinción de color de semicubiertas de cojinetes de deslizamiento Se deben distinguir semicubiertas de cojinetes de deslizamiento respecto al color de las superficies interiores.
Color differentiation of half shells of bush bearings
Half shells of friction-type bearings should be color differentiated.
|
|
|
Karta :
|
APP N° 500
Param.:
|
INI:
|
|
Control de presencia de una imprimación en marcos metálicos lacados en negro Se debe detectar la presencia de una imprimación, aplicada a marcos metálicos lacados en negro.
Primer presence control on a black painted metal frame
The presence of a primer should be detected on a black painted metal frame.
|
|
|
Karta :
|
APP N° 499
Param.:
|
INI:
|
|
Control de color LED de componentes interiores Se deben controlar el color y la intensidad de los LEDs de los componentes plásticos interiores. Además, en los componentes, en los que no hay LEDs, se debe verificar si existe una placa cobertora.
LED color control on interior components
The color as well as the intensity of LEDs, integrated in interior components, should be controlled. Furthermore, on components without LEDs the presence of a cover plate should be checked.
|
|
|
Karta :
|
APP N° 498
Param.:
|
INI:
|
|
Control de color de anillos de metal Se debe controlar la calidad de anillos de metal por el color.
Color control of metal rings
The quality of metal rings should be controlled with a view to the color.
|
|
|
Karta :
|
APP N° 497
Param.:
|
INI:
|
|
Distinción de color de cubiertas metálicas de altavoces Se deben distinguir dos diferentes cubiertas metálicas de altavoces según el color.
Color differentiation of metal loudspeaker grids
Two kinds of metal loudspeaker grids should be color differentiated.
|
|
|
Karta :
|
APP N° 496
Param.:
|
INI:
|
|
Control de presencia de aceite en rejillas de metal Se debe controlar la presencia de aceite en rejillas de metal.
Oil presence control on metal grids
The presence of oil should be detected on metal grids.
|
|
|
Karta :
|
APP N° 495
|
Medición de brillo en textiles revestidos Se debe medir el factor de brillo de superficies de textiles revestidas.
Gloss measurement on coated textiles
The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value.
|
|
|
Karta :
|
APP N° 494
Param.:
|
INI:
|
|
Control de color de camisetas empaquetadas en láminas transparentes Se debe supervisar el color de camisetas que están empaquetadas en láminas transparentes.
Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
|
|
|
Karta :
|
APP N° 493
Param.:
|
INI:
|
|
Detección de fluorescencia en láminas metálicas En láminas de metal, se debe supervisar la presencia de una capa fluorescente.
Fluorescence detection on metal foils
The presence of fluorescence coating on a metal foil should be controlled.
|
|
|
Karta :
|
APP N° 492
|
Detección de puntos en botellas de vidrio Durante la rotación, se deben detectar puntos en una botella de vidrio.
Dot detection on glass bottles
Dots on glass bottles should be detected during the rotation.
|
|
|
Karta :
|
APP N° 491
Param.:
|
|
Medición de altura de placas de plástico transparente con tejido integrado Se debe medir la altura de láminas de plástico transparentes con tejido incrustado.
Height measurement of a transparent plastic plate with embedded fabric
The height of transparent plastic plate with different embedded fabric should be measured.
|
|
|
Karta :
|
APP N° 490
|
Medición de espesor de losas de piedra pulida Se debe determinar el espesor de losas de piedra. Se debe observar que las losas de piedra se transportan en una placa de referencia.
Thickness measurement of polished slabs
The thickness of polished slabs should be measured. It should be noted, that the slabs are placed on a reference plate.
|
|
|
Karta :
|
APP N° 489
Param.:
|
|
Medición de brillo de losas de piedra pulida Se debe medir el brillo de losas de piedra pulida.
Gloss measurement on polished slabs
The gloss of polished slabs should be measured.
|
|
|
Karta :
|
APP N° 488
|
Control de color de losas de piedra pulida Se debe detectar el color de losas de piedra pulida.
Color control of polished slabs
The color of polished slabs should be controlled.
|
|
|
Karta :
|
APP N° 487
Param.:
|
INI:
|
|
Medición del color de granulado de plástico Durante la producción, se debe medir el color de granulado de plástico.
Color measurement of plastic pellets
The color of plastic pellets should be measured during the production.
|
|
|
Karta :
|
APP N° 486
Param.:
|
INI:
|
|
Medición de marcas de color en varios tejidos Los valores de color L* a * b * L * de marcas de color en diversos tejidos.
Color mark measurement on fabric
The L*a*b* values of color marks on different fabric should be determined.
|
|
|
Karta :
|
APP N° 485
Param.:
|
INI:
|
|
Control de posición de hilo durante el proceso de bobinado en una bobina Se debe supervisar la posición de un hilo textil durante el proceso de bobinado de una bobina.
Winding control of yarn on a pirn
During the winding of yarn, the correct winding should be controlled.
|
|
|
Karta :
|
APP N° 484
Param.:
|
|
Medición de tamaño de partícula de un aerosol Se debe determinar el tamaño de partícula de un aerosol.
Particle size measurement in a spray jet
The size of particles in a spray jet should be measured.
|
|
|
Karta :
|
APP N° 483
Param.:
|
|
Control de chorro de aspersión durante el movimiento Se debe supervisar el chorro de aspersión de una boquilla de pulverización durante el movimiento.
Spray jet control during the movement
The spray jet of a spray nozzle should be controlled during the movement.
|
|
|
Karta :
|
APP N° 482
Param.:
|
INI:
|
|
Medición de color de chapas lacadas Se debe determinar el color de chapas lacadas (valores L * a * b *).
Color measurement of lacquered metal sheets
The color of painted metal sheets should be measured (L*a*b* values).
|
|
|
Karta :
|
APP N° 481
Param.:
|
INI:
|
|
Distinción de color de cubiertas de lápices de plástico Se deben distinguir cubiertas de plástico según el color.
Color differentiation of plastic pen housings
The color of plastic bushings should be controlled.
|
|
|
Karta :
|
APP N° 480
Param.:
|
INI:
|
|
Control de exactitud de posición de pernos de metal Se deben controlar piezas giratorias de acero respecto a la exactitud de la posición.
Direction control of metal pins
The direction of metal pins should be controlled.
|
|
|
Karta :
|
APP N° 479
Param.:
|
INI:
|
|
Distinción de color de cubiertas de cinturón de seguridad claras Se deben distinguir cubiertas de cinturón de seguridad claras según el color.
Color differentiation of bright seat belt plastic housings
Bright seat belt plastic housings should be color differentiated.
|
|
|
Karta :
|
APP N° 478
Param.:
|
INI:
|
|
Distinción de color de cubiertas plásticas de cinturón de seguridad de color beige Se deben distinguir cubiertas plásticas de cinturón de seguridad beige y beige claro.
Color differentiation of beige seat belt plastic housings
Beige colored seat belt plastic housings should be differentiated.
|
|
|
Karta :
|
APP N° 477
Param.:
|
INI:
|
|
Distinción de color de cubiertas de cinturones de seguridad Se deben distinguir cubiertas de cinturones de seguridad según el color. Se trata de piezas de plástico muy oscuras, que por un lado tienen un toque ligeramente rojizo, y por otro, un toque ligeramente azulado.
Color differentiation of dark seat belt plastic housings
Dark seat belt housings should be differentiated.
|
|
|
Karta :
|
APP N° 476
Param.:
|
INI:
|
|
Distinción de color de piezas de plástico de ámbito interior en el sector de la automoción Se deben diferenciar por color componentes interiores de plástico.
Color differentiation of plastic interior components for the automotive industry
Plastic components used for the automotive interior field should be color differentiated.
|
|
|
Karta :
|
APP N° 475
Param.:
|
INI:
|
|
Distinción entre tubos de aluminio lacados en el interior individuales y dobles Se deben distinguir entre tubos de aluminio lacados en el interior individuales o dobles.
Differentiation of single and double inside coated aluminum tubes
Single inside coated aluminum tubes should be differentiated from double inside coated aluminum tubes.
|
|
|
Karta :
|
APP N° 474
Param.:
|
INI:
|
|
Detección de aceite fluorescente en distintas arandelas de sellado Se debe controlar la presencia de aceite en arandelas de sellado. Se debe observar que el aceite emite fluorescencia cuando se utiliza luz UV.
Detection of fluorescent oil on flat washers
The presence of oil on different flat washers should be controlled. It has to be taken into account, that the oil is fluorescent, if UV light is used.
|
|
|
Karta :
|
APP N° 473
Param.:
|
|
Detección de un lubricante fluorescente en pernos de metal Se debe detectar la presencia de una capa de lubricante bajo luz UV.
Detection of fluorescent lubricant on metal pins
Fluorescent lubricant should be detected on metal pins.
|
|
|
Karta :
|
APP N° 472
|
Distinción de color de tubos de plástico Se deben distinguir tubos de plástico según el color.
Color differentiation of small plastic tubes
Small violet plastic tubes should be color differentiated.
|
|
|
Karta :
|
APP N° 471
Param.:
|
|
Distinción de color de pequeños cepillos de plástico Se debe distinguir el color de cepillos de plástico pequeños.
Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
|
|
|
Karta :
|
APP N° 470
|
Medición de color de tejas Se debe medir inline el color de tejas.
Roof tile color measurement
The color of roof tiles should be inline measured.
|
|
|
Karta :
|
APP N° 469
|
Detección de una capa de absorción de luz UV en una botella transparente Se debe detectar de forma fiable la presencia de una capa absorbente de luz UV en una botella transparente.
Detection of an UV blocking layer on transparent glass bottles
The presence of an UV blocking layer should be detected on transparent glass bottles.
|
|
|
Karta :
|
APP N° 468
|
Distinción de color de componentes de plástico lacados Se deben diferenciar piezas de plástico lacadas según el color. El sentido de giro (alrededor del eje vertical de la superficie) no debe tener influencia en el resultado de la medición.
Color differentiation of lacquered plastic components
Car finish should be color differentiated. A rotation around the perpendicular axis of the plastic components should not influence the result of the color control.
|
|
|
Karta :
|
APP N° 467
|
Distinción de color de manijas de puerta de automóviles Se debe distinguir el color de manijas de puerta de automóviles. Se debe observar que la pintura de la superficie brilla muy fuerte.
Color differentiation of car door handles
Car door handles should be color differentiated. It has to be taken into account, that the door handles are very shiny.
|
|
|
Karta :
|
APP N° 466
Param.:
|
INI:
|
|
Control de presencia de un troquelado semicircular en la nariz de una pieza estampada Se debe supervisar la presencia de un troquelado semicircular en la nariz de una pieza estampada. Además, se debe comprobar si se trata de una semicircular o alargada.
Presence control of a notch in a lobe of a metal stamping part
The presence of a notch in a lobe of a metal stamping part should be detected. Furthermore a semicircular notch must be differentiated from an elongated notch.
|
|
|
Karta :
|
APP N° 465
Param.:
|
INI:
|
|
Medición de color de cables aislados Se debe medir inline el color del aislamiento de cables eléctricos.
Color measurement of the insulation of cables
The color of the insulation of electrical cables should be inline measured.
|
|
|
Karta :
|
APP N° 464
Param.:
|
|
Control de cantidad de aspersión en áreas peligrosas Se debe controlar la presencia y la cantidad de aspersión de un aspersor en un área peligrosa. Se debe observar que aquí no se puede utilizar un control por luz transmitida.
Spray jet amount control in the Ɛx range
The presence as well as the spray amount of a spray jet in the Ex range should be controlled. It has to be taken into account, that a system based on the transmitted light mode cannot be used for this application.
|
|
|
Karta :
|
APP N° 463
Param.:
|
INI:
|
|
Control de presencia de aceite en tuercas y tornillos Se debe controlar la presencia de aceite en tuercas y tornillos inmediatamente antes de la colocación de bridas.
Oil presence control in metal screw nuts and screws
The presence and amount of oil in a screw nut as well as in a screw should be detected directly before border crimping.
|
|
|
Karta :
|
APP N° 462
|
Recuento de bolsas de papel dobladas Se deben contar bolsas de papel dobladas que se transportan en una cinta.
Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.
|
|
|
Karta :
|
APP N° 461
Param.:
|
INI:
|
|
Control de color de una franja roja en un cinturón de seguridad Se debe supervisar el color de una franja roja en un cinturón de seguridad. El color rojo se debe mantener dentro de un cierto rango de tolerancia.
Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
|
|
|
Karta :
|
APP N° 460
Param.:
|
|
Supervisión de la transición de un material de grueso a fino En un textil, se debe controlar la posición de la transición de grueso a fino.
Edge position detection on fabric
The position of the changeover from rough to fine on a textile should be detected.
|
|
|
Karta :
|
APP N° 459
Param.:
|
INI:
|
|
Distinción de la parte posterior de la parte frontal de un anillo de plástico Se deben controlar anillos de plástico, que se transportan en una cinta, respecto a la posición (parte frontal arriba - abajo).
Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
|
|
|
Karta :
|
APP N° 458
Param.:
|
INI:
|
|
Detección del punto de separación en una banda de vellón-plástico Se debe detectar el punto de separación en una banda de vellón-plástico. Se debe observar que tanto el punto de separación y como el el vellón-plástico son de color blanco, por lo tanto, no hay ninguna diferencia de color.
Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
|
|
|
Karta :
|
APP N° 457
|
Detección de la posición de una capa de silicona en una cinta de plástico transparente Se debe detectar la ubicación de una capa de silicona en una película de plástico transparente (detección de la parte delantera y la parte posterior de la cinta).
Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
|
|
|
Karta :
|
APP N° 456
|
Detección de adhesivo en una rosca Se debe controlar la presencia y la cantidad de adhesivo fluorescente (bajo luz UV) en la rosca de un tornillo.
Glue detection on the thread of a screw
The presence and amount of fluorescent (fluorescent under the influence of UV light) glue on the thread of a screw should be detected.
|
|
|
Karta :
|
APP N° 455
Param.:
|
INI:
|
|
Detección de costura en cuero e imitación de cuero Se deben detectar costuras beige (negras) en cuero o imitaciones de cuero beige (negros).
Seam detection on leather and leather imitations
Beige (black) stitching should be detected on beige (black) leather or leather imitations.
|
|
|
Karta :
|
APP N° 454
|
Distinción de cuero e imitación de cuero Se deben distinguir de manera segura uno de otro cuero e imitaciones de cuero en el ámbito interior.
Differentiation of leather and leather imitations
Leather and leather imitations used in the interior field should be proper differentiated.
|
|
|
Karta :
|
APP N° 453
Param.:
|
INI:
|
|
Medición de longitud de una placa de yeso Se debe medir la longitud de una placa de yeso.
Measurement of the length of gypsum plasterboard
The length of gypsum plasterboard should be measured.
|
|
|
Karta :
|
APP N° 452
Param.:
|
|
Control de doble capa de anillos de acero Se debe supervisar la presencia de uno o dos anillos de acero.
Double ring control
The presence of one or two rings should be controlled.
|
|
|
Karta :
|
APP N° 451
|
Control de ubicación de un tapón de goma inmediatamente antes de la introducción en una jeringa Se debe controlar la correcta ubicación de un tapón de goma inmediatamente antes de la introducción en una jeringa
Position monitoring of a rubber plug before the final positioning in a syringe
The position of a rubber plug should be controlled with regard to the outer face and inner surface.
|
|
|
Karta :
|
APP N° 450
|
Control de color por luz refleja de revestimientos de vidrio Se deben examinar revestimientos de vidrio con el método de luz refleja respecto al gradiente de color.
Reflected light color control of coatings on glass plates
The coating of glass plates should be color controlled in the reflected light mode.
|
|
|
Karta :
|
APP N° 449
|
Control de color por luz transmitida de revestimientos de vidrio Se deben examinar revestimientos de vidrio con el método de luz transmitida respecto al gradiente de color.
Transmitted light color control of coatings on glass plates
The coating of glass plates should be color controlled in the through beam way.
|
|
|
Karta :
|
APP N° 448
Param.:
|
INI:
|
|
Detección de soldaduras en tubos interiores Se debe detectar la posición de una soldadura en un tubo interior.
Detection of the welding line in the core retainer
The position of the welding line should be detected in inner pipes.
|
|
|
Karta :
|
APP N° 447
Param.:
|
INI:
|
|
Distinción de color de tapas de plástico para jeringas Se deben controlar tapas de plástico que se utilizan para jeringas de vidrio. Se debe observar que las tapas de plástico son un poco transparentes y su superficie es muy brillante.
Color differentiation of plastic caps for syringes
Plastic caps used for syringes should be color controlled. It has to be taken into account, that the plastic caps are semitransparent and the surface is very glossy.
|
|
|
Karta :
|
APP N° 446
Param.:
|
|
Control de aspersión en funcionamiento de luz refleja Se debe efectuar un control de aspersión en funcionamiento de luz refleja para el empleo en áreas peligrosas.
Spray jet control with reflected light
The spray jet should be controlled with reflected infrared light and in an Ɛx zone environment.
|
|
|
Karta :
|
APP N° 445
Param.:
|
INI:
|
|
Control de color de patatas fritas Se debe supervisar el color de patatas fritas.
Color control of fried potato chips
The color of fried potato chips should be controlled.
|
|
|
Karta :
|
APP N° 444
Param.:
|
INI:
|
|
Control de escala de grises de láminas de plástico de serigrafía Se debe supervisar la escala de grises de láminas de plástico de serigrafía.
Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
|
|
|
Karta :
|
APP N° 443
Param.:
|
INI:
|
|
Supervisión de color de marcas de color de serigrafía Se debe controlar el color de marcas de color de serigrafía en placas de plástico.
Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
|
|
|
Karta :
|
APP N° 442
Param.:
|
INI:
|
|
Control de color de esmaltes de uñas Se debe supervisar el color de esmalte de uñas. Se debe observar que el esmalte se distinga según color, ya envasado, a través de vidrio transparente.
Color control of nail polishes
The color of nail varnishes should be controlled. It has to be taken into account that the nail lacquers should be checked through transparent glass bottles.
|
|
|
Karta :
|
APP N° 441
Param.:
|
|
Distinción de color de maquillaje Se debe controlar el color de maquillaje.
Color differentiation of make-up
The color of make-up should be controlled.
|
|
|
Karta :
|
APP N° 440
Param.:
|
INI:
|
|
Distinción de color de sombra de ojos Se debe controlar el color de sombra de ojos.
Color differentiation of eye shadows
The color of eye shadows should be controlled.
|
|
|
Karta :
|
APP N° 439
Param.:
|
INI:
|
|
Distinción de color de lápices labiales Se debe controlar el color de lápices labiales.
Color differentiation of lipsticks
The color of lipsticks should be controlled.
|
|
|
Karta :
|
APP N° 438
Param.:
|
|
Control de diámetro de hilos metálicos Se debe medir el diámetro de diferentes alambres de metal, también se los debe distinguir.
Diameter control of metal wires
The diameter of metal wires should be controlled and the wires should be differentiated.
|
|
|
Karta :
|
APP N° 437
Param.:
|
INI:
|
|
Distinción entre tiras de estampación revestidas de estaño o plata Se deben separar tiras de estampación revestidas de estaño o plata.
Color differentiation of tin and silver plated stamping stripes
Tin plated stamping stripes should be distinguished from silver plated stamping stripes.
|
|
|
Karta :
|
APP N° 436
Param.:
|
|
Determinación de posición de filtros de cigarrillos Se debe detectar con precisión la posición de filtros de cigarrillos, incluso a alta velocidad de los objetos.
Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.
|
|
|
Karta :
|
APP N° 435
|
Medición del espesor de una capa delgada sobre una lámina de plástico transparente Se debe determinar el espesor de una capa delgada sobre un sustrato ópticamente transparente. Es adecuada una medición por transmisión, ya que la intensidad se puede utilizar para calcular el espesor.
Thickness control of a thin layer on a transparent plastic film
The thickness of a thin layer on a transparent plastic film should be measured. To measure the transmission with a through beam system seems to be an adequate method to determine the thickness of a thin layer.
|
|
|
Karta :
|
APP N° 434
Param.:
|
INI:
|
|
Control de opacidad de placas de plástico ópticamente semitransparentes Se deben examinar placas de plástico ópticamente semitransparentes respecto a la turbidez.
Haze control of semi transparent plastic plates
Semi transparent plastic plates should be controlled with a view to the opacity.
|
|
|
Karta :
|
APP N° 433
Param.:
|
INI:
|
|
Distinción de color de tapas de plástico Se deben separar por color tapas de plástico, tales como las utilizadas para las botellas de agua. Se debe observar que las tapas tienen un brillo muy fuerte.
Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.
|
|
|
Karta :
|
APP N° 432
Param.:
|
|
Distinción de color de molduras lacadas Se deben distinguir molduras según el color. Se debe observar que las molduras tienen un brillo muy fuerte debido al barniz protector.
Color differentiation of lacquered trims
Trim strips should be color differentiated. It has to be taken into account, that the lacquered trims are very shiny.
|
|
|
Karta :
|
APP N° 431
|
Control de calidad de cartuchos Se debe supervisar la calidad de cartuchos de impresoras láser. Se debe observar que con el uso creciente del cartucho, disminuye la reflectividad de su superficie.
Quality control of cartridges
The quality of cartridges should be controlled. It has to be taken into account, that the reflectivity of the surface of the cartridges will be decreased with the increase of the usage of the cartridges.
|
|
|
Karta :
|
APP N° 430
|
Control de color y turbiedad de piedras finas Se debe controlar la transparencia óptica y el color de piedras finas.
Color and opacity control of gemstones
The color as well as the opacity of gemstones should be controlled.
|
|
|
Karta :
|
APP N° 429
Param.:
|
INI:
|
|
Distinción de color de los hilos encerados Se deben diferenciar hilos encerados por el color. Se debe observar que los hilos brillan fuertemente a través de la capa de cera.
Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
|
|
|
Karta :
|
APP N° 428
Param.:
|
INI:
|
|
Distinción de piezas torneadas de acero galvanizadas de piezas no galvanizadas Se deben distinguir piezas torneadas de acero galvanizadas de piezas no galvanizadas.
Differentiation of zinc plated steel parts and raw steel parts
Zinc plated steel turned parts should be differentiated from raw steel turned parts.
|
|
|
Karta :
|
APP N° 427
|
Control de color y orientación de cápsulas Se deben supervisar el color y la orientación de cápsulas durante la producción inmediatamente antes del envasado.
Color and guidance control of capsules
The color as well as the orientation of capsules should be controlled during the production and just before packaging.
|
|
|
Karta :
|
APP N° 426
|
Control de color de textiles Se debe supervisar inline el color de tiras textiles.
Detection of color on fabric
The color of different colored fabric should be inline controlled.
|
|
|
Karta :
|
APP N° 425
|
Control de presencia una película de aceite en una carcasa de acero Se debe supervisar en una carcasa de acero si en su interior la superficie está impregnada con una película de aceite.
Presence control of an oil film on an aluminum surface
The presence of an oil film in aluminum housing should be controlled.
|
|
|
Karta :
|
APP N° 424
|
Control de presencia de gotas de aceite en una superficie de acero Se debe supervisar la presencia de una gota de aceite sobre una superficie de acero.
Oil drop presence control on a steel surface
The presence of an oil drop on a steel surface should be controlled.
|
|
|
Karta :
|
APP N° 423
|
Control de dobles capas de membranas en discos de ruptura En un disco de ruptura se debe supervisar si accidentalmente hay una o dos membranas. Se debe observar que los discos de ruptura pueden ser de diferentes materiales (cobre o aluminio), así como también las membranas (papel de aluminio o de lámina de acero).
Double membrane control on breaker plates
The presence of one or two diaphragms in a blow-out disk should be differentiated. At this, different types of burst disks are available (copper and aluminum) with different diaphragms (aluminum membrane or steel membrane).
|
|
|
Karta :
|
APP N° 422
|
Control de presencia de un anillo de silicona en una pieza de plástico Se debe verificar la presencia de un anillo de silicona en una pieza de plástico.
Presence control of a seal ring on a plastic component
The presence of a silicon ring on a plastic component should be controlled.
|
|
|
Karta :
|
APP N° 421
|
Detección de una capa adhesiva fluorescente en un sobre de plástico Se debe detectar una capa adhesiva fluorescente bajo luz UV. Se debe observar que la capa adhesiva está cubierta por una cinta de plástico transparente.
Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.
|
|
|
Karta :
|
APP N° 420
|
Detección de una capa adhesiva en sobres de plástico Se debe detectar una capa adhesiva en sobres de plástico. La capa adhesiva ocasiona en el lado opuesto una cierta ondulación de la lámina de plástico. Ya que el lado adhesivo está cubierto con una lámina metalizada de alto brillo, se debe controlar forzosamente en la parte posterior.
Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.
|
|
|
Karta :
|
APP N° 419
|
Distinción de alcántara de telas en el ámbito interior Se debe distinguir un recubrimiento alcántara de otro textil.
Differentiation Alcantara (Ultrasuede) and fabric interior equipment
Alcantara and fabric interior equipment should be differentiated.
|
|
|
Karta :
|
APP N° 418
|
Distinción de granulados de plástico Se deben separar unos de otros granulados de plástico ligeramente diferentes químicamente y en su color.
Differentiation of plastic pellets
Chemically and in terms of color different plastic pellets should be distinguished.
|
|
|
Karta :
|
APP N° 417
|
Detección de etiquetas fluorescentes Bajo luz ultravioleta se deben detectar etiquetas fluorescentes, así como también espacios vacíos entre las etiquetas.
Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
|
|
|
Karta :
|
APP N° 416
|
Control de presencia de hilado en el mango de plástico de un husillo Se debe verificar la presencia de hilado en el mango de plástico de un husillo.
Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
|
|
|
Karta :
|
APP N° 415
|
Control de dirección de varillas metálicas Se deben controlar con precisión varillas de metal respecto a la posición. Un extremo de la varilla es plano, mientras que el otro es redondo.
Direction control of a metal rod
The direction of a metal rot should be controlled. At this, the metal rod is flat press formed at the one side and at the other end round in shape.
|
|
|
Karta :
|
APP N° 414
|
Control de frecuencia de ventiladores industriales Se deben supervisar la frecuencia y el sentido de rotación de ventiladores. Para ello, se unió a una de las palas del rotor una pegatina que se vuelve fluorescente bajo luz ultravioleta.
Frequency control of industrial ventilators
The frequency as well as the direction of rotation of industrial ventilators should be controlled. At this, on one of the blades of the ventilator a fluorescent label is glued on.
|
|
|
Karta :
|
APP N° 413
|
Control de ubicación de hilos metálicos en una lámina de plástico transparente Se debe examinar en una película de plástico si los hilos de metal se encuentran en el lado frontal o en el posterior de la lámina.
Position monitoring of metal wires on a transparent plastic layer
The back side / front side position of metal wires on a transparent plastic film should be controlled.
|
|
|
Karta :
|
APP N° 412
|
Detección y conteo de pliegues en fuelles En varios materiales de fuelle se debe determinar el número de pliegues.
Edge detection at bellows (fold counting)
On bellows the edges should be detected and counted.
|
|
|
Karta :
|
APP N° 411
|
Distinción de tipos de resorte de gas Se deben separar dos tipos diferentes de resorte de gas. Los resortes de gas se pueden girar durante la inspección.
Differentiation of pneumatic cylinders
Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis.
|
|
|
Karta :
|
APP N° 410
|
Control de velocidad de rotores de turbocompresores Se debe supervisar la velocidad de los rotores de turbocompresores. Una de las alas de los rotores está recubierta con un barniz fluorescente.
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled. At this, one of the blades of the wheel is coated with a fluorescent transparent lacquer.
|
|
|
Karta :
|
APP N° 409
|
Detección de huecos en núcleos de hierro de motores eléctricos Se deben detectar huecos en núcleos de hierro de motores eléctricos de forma fiable en rotación rápida.
Gap detection on iron cores of electrical motors
The gaps on iron cores of electrical motors should be detected during the fast rotation.
|
|
|
Karta :
|
APP N° 408
|
Distinción entre imitaciones de cuero de color negro y gris oscuro Se debe distinguir una imitación de cuero gris oscuro de una de cuero negro.
Differentiation of black and dark gray leather imitation
Dark gray and black leather imitation should be distinguished.
|
|
|
Karta :
|
APP N° 407
|
Detección de residuos de plástico en filamentos metálicos Se deben detectar residuos de plástico en el inicio de un filamento de metal.
Detection of plastic residues on the start of metal thread
Plastic residues on the start of metal threads should be detected.
|
|
|
Karta :
|
APP N° 406
|
Control de transmisión de placas de plástico blanco Se deben examinar placas plásticas blancas respecto a la transmisión de la luz.
Transparency control of white plastic plates
The transparency of white plastic plates should be controlled.
|
|
|
Karta :
|
APP N° 405
|
Control de presencia de una rosca interior y de un agujero en un engranaje Se debe supervisar la presencia de una rosca interior y de un agujero en un engranaje. Además, se debe controlar si el agujero, por ejemplo, está bloqueado por una broca rota.
Presence control of an inside thread and a hole at a gear wheel
The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit.
|
|
|
Karta :
|
APP N° 404
|
Medición de altura de un pasador de metal, del tamaño de los dientes y de la profundidad de un agujero ciego de un engranaje Se deben controlar sin contacto la altura de un pasador de metal, el tamaño de los dientes y la profundidad de un agujero ciego de un engranaje.
Height measurement of a metal pin and of the teeth as well as the depth of a blind hole on a metal gear wheel
The height of a metal pin as well as the depth of a blind hole on a gear wheel should be controlled. Furthermore, the height of the teeth on the gear wheel should be measured.
|
|
|
Karta :
|
APP N° 403
|
Medición del tamaño de ranuras en carcasas de aluminio de turbocompresores Se debe realizar una medición de ranura en carcasas de aluminio de turbocompresores.
Gap size measurement on an aluminum casting of a turbo charger
The gap size on the aluminum housing of a turbo charger should be measured.
|
|
|
Karta :
|
APP N° 402
|
Control de color de un revestimiento de cable Se debe supervisar el aislamiento de un cable respecto al color.
Color control of cable jacket
The color of a cable jacket should be controlled.
|
|
|
Karta :
|
APP N° 401
|
Presencia de control de una capa adhesiva en una pieza de plástico bajo luz fluorescente ultravioleta Se debe supervisar la presencia de una capa adhesiva fluorescente en la parte trasera de una pieza de plástico bajo luz ultravioleta. También se debe evitar una detección errónea en la parte frontal de la pieza.
Presence control of UV bond on a plastic component
The presence of an UV adhesive layer on the backside of a plastic part should be controlled. A false detection even from the front side of the plastic component must be avoided.
|
|
|
Karta :
|
APP N° 400
|
Medición de espesores de cintas bimetálicas Durante el movimiento y sin contacto se debe medir el espesor de una cinta de bimetal.
Thickness measurement of a bimetal band
The thickness of a bimetal band should be measured contactless during the movement.
|
|
|
Karta :
|
APP N° 399
|
Distinción de láminas plásticas semitransparentes Deben distinguirse ópticamente láminas de plástico translúcidas.
Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
|
|
|
Karta :
|
APP N° 398
|
Control de presencia de una pequeña placa de metal en un contacto de cobre Se debe supervisar la presencia de una pequeña placa de metal en un contacto de cobre.
Presence control of small metal plates on a copper contact
The presence of a small and thin metal plate should be detected.
|
|
|
Karta :
|
APP N° 397
|
Detección de hundimientos en una lámina de plástico En una lámina semitransparente se debe detectar hundimientos con precisión. El control sólo es posible desde arriba.
Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
|
|
|
Karta :
|
APP N° 396
|
Control de fluorescencia de sistemas de limpieza a base de agua Se debe controlar el agua de los sistemas de lavado a base de agua respecto a la proporción de aceite.El agua de perforación y los aceites minerales tienen propiedades emisoras cuando se iluminan con luz ultravioleta en el rango visible, es decir, propiedades fluorescentes. Con el aumento del contenido de aceite en la emulsión también aumenta la cantidad de luz fluorescente.
Fluorescence control of water based cleaning systems
The amount of oil in an oil-water based emulsion should be controlled. Over time cleaning water used for water based cleaning machines is changing into an oil-water based emulsion with a steady increase of the content of oil.
|
|
|
Karta :
|
APP N° 395
|
Control de turbidez de agua en sistemas de limpieza a base de agua Se debe supervisar la turbidez del agua de limpieza que se utiliza para sistemas de lavado a base de agua respecto a la contaminación por suciedad, grasa y aceite, así como también a micro virutas de metal.
Turbidity control of water based cleaning systems
The turbidity of cleaning water used for cleaning systems should be controlled. Over time, the cleaning water becomes more and more an oil-in-water emulsion mixed with dirt, grease and small metal swarf.
|
|
|
Karta :
|
APP N° 394
|
Detección de marcas de color naranja y verde fluorescentes Se deben detectar y distinguir marcas naranjas y verdes fluorescentes sobre un fondo de vellón blanco.
Detection of a fluorescent green and orange mark
Orange as well as a green fluorescent marks sprayed on a white fleece should be detected and distinguished.
|
|
|
Karta :
|
APP N° 393
|
Control de presencia de una tira de velcro en la bandeja trasera En la bandeja trasera, se supervisar la presencia de una tira de velcro.
Presence control of a Velcro® strip on rear shelf
The presence of a Velcro® strip on a hat shelf should be controlled.
|
|
|
Karta :
|
APP N° 392
|
Control de ubicación de una lámina de plástico sobre un cartón Se debe supervisar la posición de una lámina de plástico sobre un cartón. La lámina debe solapar 10 mm el borde superior del cartón.
Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.
|
|
|
Karta :
|
APP N° 391
|
Detección de un hilo fluorescente en una banda textil En la industria textil se utiliza un hilo fluorescente para marcar la unión entre dos bandas textiles. Se debe detectar ópticamente este hilo y diferenciarlo.
Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
|
|
|
Karta :
|
APP N° 390
|
Control de color de perfiles de ventanas de plástico Se deben controlar perfiles de ventanas de plástico repecto al color.
Color control of plastic window profiles
Plastic profiles which are used for casement frames should be color controlled.
|
|
|
Karta :
|
APP N° 389
|
Control de color de manijas Se deben distinguir manijas en el ámbito interior según su color.
Color control of handles
Handles in the automotive field should be color controlled.
|
|
|
Karta :
|
APP N° 388
|
Detección de bordes de oblea Se debe detectar de forma fiable el borde de obleas de 80 micras de espesor.
Wafer edge detection
The edges of wafers with a thickness of 80µm should be detected.
|
|
|
Karta :
|
APP N° 387
|
Se debe distinguir el color de imitaciones de cuero y textiles en el ámbito interior Se deben distinguir imitaciones de cuero oscuras y claras de materiales textiles. Los colores son muy similares, solamente la diferenciada estructura proporciona un valor de brillo ligeramente diferente.
Color differentiation of leather imitations and fabrics in the interior area
Different dark and light leather imitations and fabrics should be differentiated. The colors of the different dark parts as well as of the light parts are very close, almost the same, but the structure of the respective surface is slightly different.
|
|
|
Karta :
|
APP N° 386
|
Medición de diferencia de altura entre una pieza troquelada y doblada y una pieza torneada Se debe controlar la diferencia de altura entre una pieza troquelada y doblada y una pieza torneada brillante inmediatamente antes del proceso de soldadura.
Vertical height control between a turned metal part and a press-bent part
The vertical height between a shiny turned metal part and a press-bent part should be measured immediately before welding.
|
|
|
Karta :
|
APP N° 385
|
Medición de la distancia en topes de caucho negro Se debe medir la distancia a una superficie de caucho negro.
Distance control of black rubber buffers
The distance of black rubber buffers should be controlled.
|
|
|
Karta :
|
APP N° 384
|
Detección de un área pelada de un cable plano Se debe detectar con precisión el comienzo de la parte pelada de un cable plano. Se debe observar que la malla de cobre descubierta también puede estar interrumpida (nervio).
Detection of the edge of a stripped ribbon cable
The beginning of the laser stripped part of a ribbon cable should be precisely detected.
|
|
|
Karta :
|
APP N° 383
|
Distinción de color de sensores ultrasónicos desde una distancia de 100 mm Se deben separar sensores ultrasónicos según el color. Se debe observar que en el control se debe respetar una distancia mínima de 100 mm. La superficie de las tapas de los sensores a examinar brillan muy fuerte.
Color differentiation of ultrasonic sensors at a distance of 100mm
Ultrasonic sensors should be color differentiated at a distance of 100mm. It has to be taken into account, that the surface of the ultrasonic sensor cap is very glossy.
|
|
|
Karta :
|
APP N° 382
|
Distinción de objetos negros y grises con superficie aterciopelada desde una distancia de 100 mm Deben distinguirse objetos negros y grises con superficie aterciopelada a una distancia de 100 mm.
Differentiation of black and gray velvet at a sensor distance of 100mm
Black and gray interior parts with a velvet casing should be color differentiated at a distance of 100mm.
|
|
|
Karta :
|
APP N° 381
|
Distinción de color de piezas de plástico pintadas desde una distancia de 100 mm Se deben distinguir de forma segura piezas de plástico desde una distancia de por lo menos 100 mm. Se debe observar que se trata de componentes muy brillantes que también pueden estar provistos de una laca metalizada.
Color differentiation of lacquered plastic parts at a distance of 100mm
Lacquered plastic parts should be color differentiated. The parts are very glossy and even metallic lacquer should be controlled at a distance of in minimum 100mm.
|
|
|
Karta :
|
APP N° 380
|
Distinción de color de dos componentes de plástico en el ámbito interior desde una distancia de 100 mm En el sector del automóvil, deben distinguirse piezas de plástico según el color. La distancia del sensor al objeto no debe ser inferior a 100 mm.
Color differentiation of plastic parts in the interior field at a distance of 100mm
Plastic interior parts should be color differentiated from a distance of 100mm.
|
|
|
Karta :
|
APP N° 379
|
Detección de una película de plástico transparente sobre una superficie lacada brillante a una distancia de 100 mm Se debe detectar de forma fiable una película de plástico transparente sobre una superficie lacada brillante. Se debe observar que la película tiene un efecto polarizador.
Detection of a transparent film on a lacquered surface at a distance of 100mm
A transparent film should be detected on a shiny lacquered surface. It has to be taken into account that the plastic film has a certain polarization effect.
|
|
|
Karta :
|
APP N° 378
|
Control de color de piezas de inyección de plástico Se deben controlar piezas de inyección de plástico respecto al color. Se debe observar que las piezas tienen, además de diferencias de color, también diferencias de brillo. A excepción del borde, donde los valores de brillo se pueden mantener relativamente constantes.
Color control of injection moldings
Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge.
|
|
|
Karta :
|
APP N° 377
|
Distinción de color de sensores ultrasónicos Se deben distinguir sensores ultrasónicos según el color. Se debe observar que la superficie a examinar brilla extremadamente fuerte.
Color differentiation of ultrasonic sensors
Ultrasonic sensors should be color differentiated. It has to be taken into account, that the surface is very glossy.
|
|
|
Karta :
|
APP N° 376
|
Distinción de color de piezas interiores con una superficie aterciopelada Se deben distinguir componentes para interiores con superficie aterciopelada de color negro o
Color differentiation of interior components with velvet surface
Parts made for the interior field with a black or dark gray velvet surface should be color differentiated.
|
|
|
Karta :
|
APP N° 375
|
Distinción de color de piezas de plástico lacadas Se deben separar piezas de plástico lacadas según el color. Se debe observar que la superficie es extremadamente brillante.
Color differentiation of lacquered plastic components
Lacquered plastic parts should be differentiated. It should be taken into account, that the surface is very glossy.
|
|
|
Karta :
|
APP N° 374
|
Distinción de color de piezas de plástico en el ámbito interior En el ámbito interior se deben distinguir piezas de plástico de color gris de piezas gris oscuro.
Color differentiation of plastic parts in the interior field
Gray plastic parts should be separated from dark gray plastic parts.
|
|
|
Karta :
|
APP N° 373
|
Detección de una lámina de plástico transparente sobre piezas de plástico lacadas Se debe detectar una lámina adhesiva transparente en componentes de plástico lacados de color negro o blanco. Se debe observar que tanto las partes lacadas como las láminas de plástico tienen un brillo muy fuerte.
Detection of transparent film on lacquered plastic components
A transparent film should be detected on a black as well as white lacquered plastic part. It has to be taken into account, that the white and the black surface are very shiny and the plastic film as well.
|
|
|
Karta :
|
APP N° 372
|
Controlar el engranaje interno de un pieza giratoria de acero Durante la rotación, se debe supervisar la relación de la longitud de los dientes a la brecha entre los dientes en una pieza giratoria.
Quality control of internal gears
The width of the teeth as well as the gap between the teeth of internal gears should be controlled.
|
|
|
Karta :
|
APP N° 371
|
Control de presencia de una capa de cromo sobre una pieza metálica Se debe supervisar la presencia de una capa de cromo sobre una pieza metálica.
Chromium plating presence control
The presence of chromium plating on a metal part should be controlled.
|
|
|
Karta :
|
APP N° 370
|
Supervisión de color de perfiles de plástico blancos Se debe controlar el color de perfiles de plástico blancos.
Color control of white plastic profiles
The color of white plastic profiles should be controlled.
|
|
|
Karta :
|
APP N° 369
|
Detección de marcas de color en láminas plásticas Se debe detectar segura y precisamente una marca de color negro brillante sobre una lámina de plástico igualmente brillante con cambio de color de fondo.
Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.
|
|
|
Karta :
|
APP N° 368
|
Posicionamiento de láminas metálicas lacadas Se deben detectar con alta precisión la distancia y los bordes de las láminas lacadas. Se debe observar que se debe cubrir un alto rango dinámico, que se extiende desde un negro brillante hasta una superficie blanca mate. Además, se debe considerar toda la paleta de colores.
Position detection of lacquered metal sheets
The edge of different lacquered metal sheets should be precisely detected. Furthermore the distance of the painted metal plates should be measured. At this, it has to be taken into account, that a color gamut as well as gray scale range from shiny black to matt white should be covered.
|
|
|
Karta :
|
APP N° 367
|
Control de presencia de un tapón de goma en una tapa roscada de plástico Se debe supervisar la presencia de un sellado de goma en una pieza de plástico.
Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
|
|
|
Karta :
|
APP N° 366
|
Control de color de vidrio plano Se debe supervisar vidrio plano de coloración un poco diferente con el método de luz transmitida.
Color control of flat glass
The color of flat glass should be controlled in the transmitted-light mode.
|
|
|
Karta :
|
APP N° 365
|
Control de color de chapas lacadas Se deben diferenciar piezas de chapas lacadas según el color. También se deben controlar los revestimientos de laca metálicos.
Color control of lacquered metal sheets
Lacquered metal sheets should be color differentiated. Even metallic paints must be color controlled.
|
|
|
Karta :
|
APP N° 364
|
Supervisión del avance del florecimiento Se debe determinar el avance del florecimiento. Como criterio de distinción se utiliza el color de las flores.
Color control of the degree of ripeness of flowers
The degree of ripeness of flowers should be controlled. A distinguishing criterion for the degree of ripeness is the color of the flowers.
|
|
|
Karta :
|
APP N° 363
|
Control de longitud de un perno de acero Durante el movimiento, se debe controlar la longitud de un perno de acero. La barra de metal se mueve a una velocidad de 2 m / s.
Length control of a metal rod
The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement.
|
|
|
Karta :
|
APP N° 362
|
Control de presencia de una etiqueta en una botella de plástico Se debe supervisar la presencia de una etiqueta de una botella de plástico.
Label presence detection on plastic bottles
The presence of a label on plastic bottles should be controlled.
|
|
|
Karta :
|
APP N° 361
|
Distinción de color de preformas de botellas de plástico Se deben diferenciar llamadas preformas deben según el color. Se deben separar las piezas falladas de las buenas.
Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
|
|
|
Karta :
|
APP N° 360
|
Supervisión de presencia de una marca azul y también de una verde Se debe controlar la presencia de una marca azul y e otra verde en una pieza de plástico de color gris.
Presence control of a blue and a green mark on a gray plastic component
A green as well as a blue mark should be present on a gray plastic component.
|
|
|
Karta :
|
APP N° 359
|
Control de presencia de laca de sellado de tornillo en roscas internas Se debe supervisar la presencia de laca de sellado de tornillo en roscas internas.
Screw locking varnish presence control on female threads
The presence of a thread lock fluid should be controlled on inside threads.
|
|
|
Karta :
|
APP N° 358
|
Distinción de pernos pulidos de pernos no pulidos Se deben distinguir pernos pulidos de los no pulidos.
Differentiation of grinded and raw metal pins
Grinded and raw metal pins should be differentiated.
|
|
|
Karta :
|
APP N° 357
|
Distinción de color juntas tóricas Se deben diferencias juntas tóricas según el color. Se debe observar que la superficie de las juntas tóricas brilla muy fuerte.
Color differentiation of O-rings
O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy.
|
|
|
Karta :
|
APP N° 356
|
Distinción de varillas de metal Se deben distinguir varillas de metal con extremo desnudo de otras con dientes. Además, se debe comprobar si los dientes son de color negro o acero.
Differentiation of metal rods
Metal rods with an even finish should be differentiated from metal rods with a slotted end. Furthermore a metal rod with a black slotted end should be differentiated from a steel colored end.
|
|
|
Karta :
|
APP N° 355
|
Control de ancho de una cinta de plástico mate Se debe supervisar una cinta de plástico mate. Se debe contar con un desplazamiento lateral de la cinta de ± 10 mm, lo que hace necesario un rango de detección de 50 mm.
Width control of a semitransparent plastic film
The width of a semitransparent plastic film should be controlled. At this, the transversal drift of the 18.5mm wide plastic film is around ±10mm, thus the detecting range should be 50mm.
|
|
|
Karta :
|
APP N° 354
|
Control de diámetro de alambres de plástico Se debe determinar el diámetro de cables de plástico, se deben detectar alambres de 0,1 mm a 2 mm de diámetro.
Diameter control of plastic monofilaments
The diameter of plastic monofilaments should be controlled. At this, monofilaments with diameters starting from 0.1mm up to 2mm are possible.
|
|
|
Karta :
|
APP N° 353
|
Control de doble capa de láminas de plástico Se debe supervisar la zona de bordes de una lámina de plástico de doble capa. La lámina en la zona de bordes pasa de una capa doble a una capa simple.
Double layer control of plastic films
With a view to the changeover from the double layer to the single layer range of a plastic film a sensor system should deliver exactly a signal which informs about the beginning of the single layer as well as the double layer range.
|
|
|
Karta :
|
APP N° 352
|
Detección de defectos en cintas metálicas Se deben detectar grandes manchas oscuras o brillantes en cintas de metal durante el transporte de la cinta.
Defect detection on metal bands
Dark as well as bright spots with different size should be detected on metal bands.
|
|
|
Karta :
|
APP N° 351
|
Control de color de cierres de cinturones de seguridad Se deben supervisar cierres de cinturones de seguridad respecto al color.
Color control of seat belt plugs
Seat belt plugs should be color differentiated.
|
|
|
Karta :
|
APP N° 350
|
Control de color de cubiertas de plástico Se deben diferenciar patillas de plástico, que van a ser utilizadas con cinturones de seguridad, según el color.
Color control of plastic pins
Plastic pins which are used for seat belts should be color differentiated.
|
|
|
Karta :
|
APP N° 349
|
Control de color de cinturones de seguridad Se deben distinguir telas de cinturones de seguridad según el color.
Color control of seat belts
The fabric of the seat belts should be color controlled.
|
|
|
Karta :
|
APP N° 348
|
Distinción de color de boquillas de cinturones de seguridad Se debe controlar el color de las boquillas de goma para cinturones de seguridad.
Color control of seat belt rubbers
Seat belt rubbers should be color differentiated.
|
|
|
Karta :
|
APP N° 347
|
Control de carcasa de casquillo de cinturón de seguridad Se debe supervisar el color de la carcasa de casquillo de cinturón de seguridad.
Color control of seat belt sockets
Seat belt sockets should be color controlled.
|
|
|
Karta :
|
APP N° 346
|
Control de color de reticulado para sistemas de techos Se debe supervisar el color de la retícula visible de los sistemas de techos.
Color control of T-grids for ceiling systems
T-grids used for ceiling systems should be color controlled.
|
|
|
Karta :
|
APP N° 345
|
Control de presencia de estampado en cables metálicos Se debe supervisar la presencia de líneas finas estampadas en cables de metal de color cobre.
Stamping mark presence control on metal wires
The presence of stamped small lines should be controlled on a copper colored metal wire.
|
|
|
Karta :
|
APP N° 344
|
Control de doble alimentación de chapas Durante el transporte de láminas de chapa puede suceder que por error se retire de la pila más de una chapa, lo que debe ser supervisado.
Double sheet control of veneers
During the transportation of veneers, it should be controlled whether one or more than one veneer was picked up from a handling system.
|
|
|
Karta :
|
APP N° 343
|
Detección de un logotipo de empresa en una superficie de vidrio de una luz antiniebla delantera Se debe detectar un logotipo de empresa en el vidrio de una luz antiniebla delantera. Aquí vale el hecho que el logotipo se ve como un componente óptico.
Detection of a brand name on fog light glasses
A logo should be detected on a fog light glass. It has been shown that the brand name in the glass is acting like an optical component and deflects the laser beam in a different way compared to the normal glass surface.
|
|
|
Karta :
|
APP N° 342
|
Control de presencia de una tira de plástico Se debe controlar la presencia de una película de plástico semi-transparente en un sobre. Se debe observar que la película adhesiva sobre el material de soporte tiene propiedades ligeramente fluorescentes, mientras que la película de plástico mate atenúa la luz UV, con lo cual se reduce la intensidad de la fluorescencia de la capa adhesiva.
Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.
|
|
|
Karta :
|
APP N° 341
|
Detección de pliegues de una película de plástico Durante el transporte de la lámina de plástico mate se debe controlar la formación de pliegues.
Plastic film plunging control
Folds in a matt plastic film should be detected.
|
|
|
Karta :
|
APP N° 340
|
Control del color de ranuras en tableros de MDF Dentro de las ranuras se debe supervisar el gradiente homogéneo, en caso de defectos se puede ver el fondo MDF.
Color control of grooves on MDF plates
Grooves on MDF plates should be color controlled. In case of failure the MDF background color can be seen.
|
|
|
Karta :
|
APP N° 339
|
Determinación de la altura de lazo de bandas estampadas en enrolladores y desenrolladores Se debe controlar la posición de altura de bandas metálicas. Debe tenerse en cuenta que las bandas metálicas estrechas tienen tendencia a la oscilación lateral y también están sometidas a altas aceleraciones.
Metal sheet height control on rewinders and unwinders in the stamping industry
The position of metal stripes on re- and unwinders should be controlled. At this, it has to be taken into account that the metal stripes, especially the small bands, are oscillating and the acceleration can be very high.
|
|
|
Karta :
|
APP N° 338
|
Medición de espesor de una película de plástico Se debe determinar inline el espesor de una película de plástico.
Plastic film thickness measurement
The thickness of a plastic film should be measured.
|
|
|
Karta :
|
APP N° 337
|
Distinción entre la parte delantera y trasera de una película de plástico La cara brillante de una película de plástico semi-transparente debe distinguirse de la parte posterior mate.
Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
|
|
|
Karta :
|
APP N° 336
|
Detección de marcas fluorescentes en tablas Sobre tablas de madera se deben detectar marcas fluorescentes. Se deben detectar con precisión dos líneas fluorescentes muy próximas entre sí.
Detection of fluorescent marks on wooden board
Fluorescent marks should be detected on wooden boards. At this, two marks which are close together should be proper detected.
|
|
|
Karta :
|
APP N° 335
|
Control de presencia de un pegamento de fieltro en una bandeja trasera Se debe supervisar la presencia de un pegamento de fieltro en una bandeja trasera.
Presence detection of felt label on a backlight shelf
The presence of a felt label on a rear window shelf should be checked.
|
|
|
Karta :
|
APP N° 334
|
Distinción de color de telas e imitaciones de cuero En el ámbito interior de automóviles se deben distinguir diferentes materiales según el color.
Color differentiation of fabrics and leather imitations
Fabrics as well as leather imitations should be differentiated in the automotive interior field.
|
|
|
Karta :
|
APP N° 333
|
Control de frecuencia de ventiladores industriales Se debe controlar la frecuencia de los ventiladores industriales utilizados, industrialmente para ser monitoreado. Además, se debe controlar la dirección de rotación.
Frequency control of industrial ventilators
Ventilators for industrial purposes should be frequency checked. Furthermore the direction of rotation should be controlled.
|
|
|
Karta :
|
APP N° 332
|
Detección de defectos en perfiles de aluminio Se deben detectar peraltes en perfiles de aluminio.
Detection of super elevations of aluminum profile
Super elevations of aluminum profile should be detected.
|
|
|
Karta :
|
APP N° 331
|
Detección de una iluminación de barra difusa roja y también blanca en el ámbito interior Se debe detectar una iluminación de barra roja y también blanca de un componente del área de la automoción.
Detection of red and white diffuse light on interior components
The diffuse red and white light should be detected on interior components.
|
|
|
Karta :
|
APP N° 330
|
Detección de una etiqueta fluorescente transparente sobre un material de soporte transparente Se debe detectar una etiqueta de plástico transparente sobre una cinta de plástico transparente. La etiqueta fluoresce bajo la influencia de luz UV.
Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
|
|
|
Karta :
|
APP N° 329
|
Control de color de cartón ondulado Se debe controlar el color de material de cartón ondulado, en particular, se deben detectar con fiabilidad áreas negras. La distancia de la superficie corrugada al sensor no debe ser inferior a 120 mm.
Corrugated cardboard color control
The color of corrugated cardboards should be controlled. Especially black areas should be detected and the distance from the cardboard to the sensor should be larger than 120mm.
|
|
|
Karta :
|
APP N° 328
|
Control de doble capa de hojas de papel Se deben distinguir dos hojas de papel superpuestas.
Double layered paper sheet control
Double-layered paper sheets should be differentiated from single sheets.
|
|
|
Karta :
|
APP N° 327
|
Detección de un área coloreada en una banda de metal Se deben detectar áreas coloreadas en bandas de metal.
Tarnish film detection on metal band
A tarnish film should be detected on metal band.
|
|
|
Karta :
|
APP N° 326
|
Control de presencia de una capa lubricante roja sobre un perno metálico Se debe supervisar la presencia de una capa lubricante roja desde una distancia de unos 200 mm.
Presence control of red lubricant on metal pin
The presence of a red lubricant on a metal pin should be controlled. A minimum sensor distance of approx. 200mm is required.
|
|
|
Karta :
|
APP N° 325
|
Control de roturas de hilos y estiramientos excesivos en mangueras trenzadas Se deben controlar mangueras trenzadas respecto a la ausencia de hilos individuales. Además, se las debe controlar respecto a cualquier eventual estiramiento excesivo.
Braided hose wire absence and overstretch control
The presence of all wires inside a braided hose should be controlled. Furthermore it should be controlled, whether the hose is overstretched.
|
|
|
Karta :
|
APP N° 324
|
Detección de defectos en mangueras trenzadas respecto a desviaciones de diámetro Se debe controlar el diámetro mangueras trenzadas respecto a roturas de hilo y formación de cuellos.
Braided cable sleeves diameter failure detection
Deviations of the diameter of braided sleeves should be detected.
|
|
|
Karta :
|
APP N° 323
|
Distinción entre materiales de fibra natural de color negro o gris para el ámbito interior Se deben distinguir de forma segura componentes de fibra natural negros de grises.
Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
|
|
|
Karta :
|
APP N° 322
|
Control de presencia de una franja de color amarillo en una abrazadera de metal Se debe supervisar la presencia de una marca amarilla en la superficie de una abrazadera de metal.
Detection of a yellow stripe on metal clamps
The presence of a yellow striped on metal clamps should be detected.
|
|
|
Karta :
|
APP N° 321
|
Detección de huellas de pegamento en papel de embalaje Se debe supervisar una huella de pegamento. Se debe observar que la huella de pegamento tiene propiedades fluorescentes.
Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.
|
|
|
Karta :
|
APP N° 320
|
Distinción de láminas plásticas ligeramente difusas Se debe controlar la ligera turbidez de láminas plásticas transparentes.
Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
|
|
|
Karta :
|
APP N° 319
|
Distinción entre cuerpos de jeringas con y sin recubrimiento Se deben distinguir cuerpos de jeringas de vidrio o plástico recubiertos interiormente de los no recubiertos.
Differentiation of coated and uncoated syringes
Coated syringes should be distinguished from uncoated syringes.
|
|
|
Karta :
|
APP N° 318
|
Detección de una capa de laca negra de otra gris en piezas metálicas En la zona Ɛx de una cámara de pulverización se deben distinguir partes no pintadas de partes negras o grises.
Detection of black and gray lacquer coat on metal part
In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts.
|
|
|
Karta :
|
APP N° 317
|
Detección de franjas fluorescentes en boletos Se debe detectar una franja fluorescente bajo luz UV.
Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
|
|
|
Karta :
|
APP N° 316
|
Distinción de color de sensores ultrasónicos desde una gran distancia Se debe controlar el color de sensores ultrasónicos desde una distancia de 450 mm.
Color differentiation of ultrasonic sensor caps from far distance
The color of ultrasonic sensor caps should be controlled from a distance of 450mm.
|
|
|
Karta :
|
APP N° 315
|
Detección de capa adhesiva en roscas de tornillos de plástico Se debe controlar la presencia de una capa adhesiva en roscas de tornillos de plástico.
Adhesive film presence detection on plastic screws
The presence of an adhesive film should be controlled on the thread of plastic screws.
|
|
|
Karta :
|
APP N° 314
|
Distinción de sensores ultrasónicos de diferentes colores Se deben distinguir sensores ultrasónicos respecto al color.
Differentiation of different colored ultrasonic sensors
Ultrasonic sensors should be color differentiated.
|
|
|
Karta :
|
APP N° 313
|
Distinción de piezas de plástico de diferentes colores en el ámbito interior Se deben distinguir varias piezas de plástico.
Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
|
|
|
Karta :
|
APP N° 312
|
Detección de diferentes marcas de color en tubos de plástico de diferentes colores Se deben distinguir marcas de color en tubos de plástico de diferentes diseños.
Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
|
|
|
Karta :
|
APP N° 311
|
Control de presencia de una rosca interna en una pieza de aluminio fundido En una pieza de aluminio fundido, se debe controlar la presencia de una rosca interna. Además, debe distinguirse una rosca interna debe distinguirse de una perforación ciega.
Presence control of a blind thread in aluminum casting
An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole.
|
|
|
Karta :
|
APP N° 310
|
Detección de una oquedad en una cinta adhesiva de un parche adhesivo Se debe detectar la presencia de una oquedad entre dos cintas adhesivas en un parche adhesivo.
Detection of a gap on adhesive plaster
The presence of a gap of the tape on an adhesive plaster should be detected.
|
|
|
Karta :
|
APP N° 309
|
Detección de marcas de color en fibras ópticas y distinción de color de fibras ópticas recubiertas Se deben detectar color y marcas de fibras ópticas recubiertas. Las fibras ópticas se mueven a una velocidad de unos 10 m / s.
Color mark detection on optical fibers and color differentiation of optical fibers
The color as well as a color mark should be detected on optical fibers. The feed speed of the glass fiber is roughly 10 m/s.
|
|
|
Karta :
|
APP N° 308
|
Control de presencia de una tira adhesiva en una bolsa de plástico transparente Bajo la acción de luz UV, se debe supervisar la presencia de una tira adhesiva fluorescente.
Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.
|
|
|
Karta :
|
APP N° 307
|
Distinción de color de diferentes imitaciones de cuero Se deben distinguir por el color distintas imitaciones de cuero, tales como las utilizadas en el sector de la automoción.
Color Differentiation of leather imitations in the automotive field
Different colored leather imitations should be recognized and differentiated.
|
|
|
Karta :
|
APP N° 306
|
Control de color de granos de café tostado Se debe supervisar el color de granos de café tostado. El valor de color da información sobre el grado de tostadura de los granos.
Color control of the roast level of coffee beans
The color of roasted beans should be control. At this, the color informs about the roast level of the coffee beans.
|
|
|
Karta :
|
APP N° 305
|
Detección de una soldadura marcada en negro en una tira metálica estampada Se debe detectar una marca negra en distintas bandas estampadas. Las bandas pueden diferir tanto en el color como en el brillo.
Detection of a black marked welding line on different metal stamping stripes
A black mark should be detected on metal stamping stripe. At this, the stripes can be different in color and gloss.
|
|
|
Karta :
|
APP N° 304
|
Distinción entre la parte delantera mate y la brillante trasera de un panel de vidrio Se debe distinguir la parte posterior mate de un panel de vidrio de la frontal brillante.
Differentiation of the backside from the front side of a glass plate
The matt backside of a glass plate should be differentiated from the glossy front side.
|
|
|
Karta :
|
APP N° 303
|
Control de altura de masa de sellado de llamados lead frames Los chips semiconductores en lead frames se cubren con una masa de sellado. Se debe controlar la altura de esta masa, que es blanca o transparente.
Dome height inspection of lead frames
The height of the domes on lead frames should be controlled. Even a transparent coating can be controlled.
|
|
|
Karta :
|
APP N° 302
|
Medición de distancia en una superficie de aluminio Se debe medir la distancia a una superficie de aluminio. Se da una dependencia extrema de la reflectancia de la dirección de rotación de la hoja de aluminio, así que debe usarse un sensor de distancia láser que puede cubrir este amplio rango dinámico.
Distance measurement onto an aluminum ground surface
The distance to an aluminum ground surface should be measured. At this, the grinding is extremely angle-dependent and thus, the consequences in using a laser displacement sensor are that the reflectivity is strongly angle-dependent, too.
|
|
|
Karta :
|
APP N° 301
|
Detección de bordes en la parte frontal de un tubo de silicona Durante la rotación, se debe detectar una marca en forma de una protuberancia. Para este propósito, se utiliza un detector de bordes, que puede detectar con precisión la posición angular del tubo.
Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.
|
|
|
Karta :
|
APP N° 300
|
Distinción de color de hojas de papel beige Se deben controlar los diferentes tonos beige de hojas de papel. El lugar de medición debe tener un diámetro de unos 25 mm.
Color differentiation of beige papers
Beige colored papers should be color differentiated. At this, the detecting area should be around 25mm in diameter.
|
|
|
Karta :
|
APP N° 299
|
Detección de nudos en ramas Durante el transporte de ramas se deben detectar nudos. Las ramas pueden ser transportadas a velocidades diferentes. Además, se debe monitorear un rango de altura de 100 mm.
Detection of embeddings in branches
Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected.
|
|
|
Karta :
|
APP N° 298
|
Distinción del color de diversos materiales de cuero o imitación de cuero en el ámbito interior Se deben distinguir seis componentes de diferentes colores en el ámbito interior. La distancia del sensor debe ser de aproximadamente 50 mm y el tamaño del punto de medición debe tener un diámetro de aproximadamente 20 mm.
Color differentiation of interior components
Six different interior components should be color differentiated. The sensor distance should be around 50mm and the detecting range of the color sensor at this distance should be approximately 20mm in diameter.
|
|
|
Karta :
|
APP N° 297
|
Distinción del color de espigas de plástico Se deben distinguir espigas de plástico respecto al color. Se debe observar que la superficie brillante reduce la diferencia de contraste entre los tres componentes diferentes; por lo tanto, las tres partes se ven ópticamente más juntas de lo que primero podría parecer.
Color differentiation of plastic fittings
The color of plastic fittings should be controlled. At this, the high gloss factor of the surface reduces the contrast difference between the three different components.
|
|
|
Karta :
|
APP N° 296
|
Detección de un lugar abultado en un haz de fibras de plástico que se mueve rápidamente Se debe supervisar respecto a lugares abultados un haz de fibras de plástico que se mueve rápidamente. Para este propósito, se alinea un cabezal de fibra óptica de luz de transmisión ligeramente por debajo de la trayectoria normal del haz de fibras, de modo que el haz de luz no se atenúa en la trayectoria normal. En caso de presencia de un lugar abultado, por lo contrario, se cubre parcialmente el haz de luz, que a su vez produce una disminución en la señal del receptor.
Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
|
|
|
Karta :
|
APP N° 295
|
Detección de un revestimiento fluorescente en una junta de goma negra Se debe controlar la presencia de un revestimiento en una junta de goma. Para este propósito, se utiliza un revestimiento fluorescente que puede ser excitado con ayuda de luz UV - (365 nm ... 385 nm) y luego emitir luz en el rango de longitud de onda azul.
Detection of a fluorescent coating on black rubber seal
The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range.
|
|
|
Karta :
|
APP N° 294
|
Medición de espesores de cojines revestidos con papel de aluminio brillante Debe medirse el espesor de cojines que se han recubierto con papel de aluminio brillante. Los cojines se utilizan para el aislamiento térmico (aislamiento de temperatura). Los cojines de aluminio son transportados en una cinta transportadora que prácticamente no tiene variación de altura y por lo tanto puede ser utilizada como distancia de referencia.
Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.
|
|
|
Karta :
|
APP N° 293
|
Control de color y contraste del panel indicador de velocidad Se deben controlar el color y el contraste del panel negro del velocímetro. Se debe observar que tanto el color como el valor de escala de grises se encuentran dentro de las tolerancias prescritas.
Color and contrast control of a tachometer sheet
The color of a black tachometer sheet should be controlled; the color as well as the grey scale should remain in a certain tolerance range.
|
|
|
Karta :
|
APP N° 292
|
Control de presencia de una rejilla de plástico blanco sobre un fondo negro Se debe controlar la presencia de una estera de rejilla de plástico blanco sobre un fondo negro.
Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
|
|
|
Karta :
|
APP N° 291
|
Control de brillo de una tira de metal soporte de semiconductor, un denominado lead frame. Se debe controlar el brillo de un llamado lead frame en los lugares donde, en una etapa posterior del proceso de producción, se va a colocar un chip semiconductor.
Lead frame gloss control
The gloss of lead frames should be controlled. At this, the surface where the semiconductor chip should be placed can be blank or rough.
|
|
|
Karta :
|
APP N° 290
|
Distinción de botellas de vidrio transparente con fondo de color Se deben detectar y seleccionar por color botellas de vidrio transparente con fondeo de color. o de la botella debe ser detectado y separado por color. Aquí puede haber cuatro colores distintos: claro, amarillo, rojo y violeta.
Color differentiation of bottom colored clear glass bottles
Bottom colored clear glass bottles should be differentiated. At this, four different colored bottles can be possible: clear, yellow, red and violet.
|
|
|
Karta :
|
APP N° 289
|
Control de planitud de discos flex Se debe controlar la planitud de los llamados discos flex durante la rotación.
Evenness control of angle grinder discs
The flatness of angle grinder discs should be controlled during the rotation.
|
|
|
Karta :
|
APP N° 288
|
Control de presencia de una junta tórica naranja-marrón en una carcasa de aluminio fundido a presión Se debe controlar la presencia de una junta tórica en una carcasa de aluminio fundido a presión.
Presence control of an o-ring seal on aluminum casing
The presence of an o-ring seal on aluminum housing should be controlled.
|
|
|
Karta :
|
APP N° 287
|
Detección de marcas de color en una película de plástico recubierta con aluminio impreso Se deben detectar marcas de color negro en una película de plástico recubierta con aluminio. Para el posicionamiento exacto de la lámina de plástico se debe disponer de tanto de una señal como de una digital.
Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.
|
|
|
Karta :
|
APP N° 286
|
Supervisión de brillo en un revestimiento de cable Se debe controlar el aislamiento de cables de plástico respecto al valor de brillo.
Gloss control of a cable jacket
The gloss of a black cable jacket should be controlled.
|
|
|
Karta :
|
APP N° 285
|
Control de presencia de un vellón que se envuelve alrededor de un mazo de cables Se debe controlar la presencia de un material de vellón en un mazo de cables. El color del mazo de cables puede variar, mientras que el vellón es siempre blanco.
Presence control of a fleece on a cable harness
The presence of a fleece on a cable bundle should be controlled. At this, the color of the harness can differ from batch to batch, whereas the color of the fleece remains white.
|
|
|
Karta :
|
APP N° 284
|
Control de la posición de los soportes de filamentos en una bombilla de vidrio Se debe detectar la posición de los soportes de filamentos individuales dentro de lámparas de vidrio de color rojo o claras.
Position control of filament holders in bulbs
The position of the filament holders in clear as well as red glass bulbs should be controlled.
|
|
|
Karta :
|
APP N° 283
|
Control de posición de un cierre a presión Se debe monitorear la posición de un cierre de trinquete respecto a la carcasa de metal.
Position control of spring locks on metal parts
The position of the snap fit of a metal part should be controlled.
|
|
|
Karta :
|
APP N° 282
|
Recuento de bandejas de metal apiladas Se debe controlar el número de bandejas de metal en una pila.
Counting of stacked metal blanks
The correct number of stacked metal blanks should be controlled.
|
|
|
Karta :
|
APP N° 281
|
Control de eyección de piezas de estampación Para seguridad de una estampadora se utiliza un control de expulsión de la piezas estampadas. Para ello, las pequeñas piezas estampadas se controlan en caída libre inmediatamente después de la perforación. Las piezas pueden tener una velocidad de varios m / s.
Ejection control of stamping parts
Due to stamping tool protection reasons the ejection of very small stamping parts should be controlled and the parts counted. The ejection speed of the parts is in the range of a few m/s.
|
|
|
Karta :
|
APP N° 280
|
Detección de la posición de un borde en la parte frontal de un tubo de plástico Durante la rotación de un tubo de plástico, se debe detectar un borde en el lado frontal del tubo.
Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.
|
|
|
Karta :
|
APP N° 279
|
Distinción de color de tapas de plástico V Se deben controlar tapas de plástico roscadas de tres diferentes colores (amarillo claro, amarillo oscuro, verde claro y verde oscuro).
Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
|
|
|
Karta :
|
APP N° 278
|
Distinción de color de tapas de plástico IV Se deben controlar tapas de plástico roscadas de tres diferentes colores (azul claro, azul y azul oscuro).
Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
|
|
|
Karta :
|
APP N° 277
|
Distinción de color de tapas de plástico III Se deben controlar tapas de plástico roscadas de tres diferentes colores (negro, dorado claro y dorado oscuro).
Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
|
|
|
Karta :
|
APP N° 276
|
Distinción de color de tapas de plástico II Se deben controlar tapas de plástico roscadas de tres diferentes colores (blanco, rojo claro y rojo oscuro).
Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
|
|
|
Karta :
|
APP N° 275
|
Distinción de color de tapas de plástico I Se deben controlar tapas de plástico roscadas de tres diferentes colores (naranja claro, naranja oscuro y gris).
Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.
|
|
APP N° 274
|
Detección de marcas de vibración en tiras bimetálicas para cojinetes Antes del proceso de esmerilado, se deben detectar marcas de vibración en tiras bimetálicas, de las cuales se producen medias cubiertas para cojinetes.
Detection of machining marks on bimetallic strips of slide bearings
Chatter marks on slide bearing stripes should be detected immediately before the grinding process.
|
|
|
Karta :
|
APP N° 273
|
Detección de variación de color en preformas de botellas de plástico Debe ser detectada la variación del color en preformas de botellas de plástico a tiempo durante el proceso de manipulación. Con este fin, se detiene una matriz de preformas de plástico por varios cientos de milisegundos, el tiempo es suficiente para controlar una preforma. Ya que se producen preformas de distintos colores (por ejemplo, claro, azul, verde, marrón), el sistema de control de color debe ser capaz de adaptarse rápidamente a las circunstancias cambiantes.
Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
|
|
|
Karta :
|
APP N° 272
|
Detección de una cinta adhesiva de plástico en suelos de plástico Se debe detectar una cinta adhesiva que une entre sí dos extremos de pisos de plástico. El piso de plástico puede tomar varios colores, mientras que la cinta es amarilla o marrón.
Detection of an adhesive tape on plastic flooring
An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color.
|
|
|
Karta :
|
APP N° 271
|
Detección de una capa adhesiva sobre una película de plástico Se debe detectar la presencia de una capa adhesiva sobre una película de plástico. Óptimamente se debe controlar todo el ancho de la capa adhesiva. La capa de pegamento es fluorescente cuando se utiliza la luz UV (365 nm ... 385 nm) y emite luz azul visible tras la excitación. Por el contrario, la superficie de plástico se comporta neutral respecto a la luz UV.
Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
|
|
|
Karta :
|
APP N° 270
|
Distinción de la parte delantera de la parte posterior de un vellón Se debe distinguir la parte delantera de la parte trasera de un material de vellón. Usando luz UV, la parte trasera del vellón fluoresce en color azul, mientras que la delantera se mantiene neutral. El efecto fluorescente es así amortiguado, haciendo posible una distinción de la posición del vellón.
Differentiation of front- and backside of a fleece
The front side of a fleece should be differentiated from the back side. The back side (non structured side) is UV fluorescent, whereas the plastic structured film is nonfluorescent and damps the fluorescence.
|
|
|
Karta :
|
APP N° 269
|
Distinción del color de dos piezas de plástico Se deben detectar dos piezas de plástico de color diferente del ámbito interior.
Color differentiation of two plastic parts
Two different colored plastic components used in the interior field should be differentiated.
|
|
|
Karta :
|
APP N° 268
|
Medición angular de alta velocidad con control adicional de control de rotación Se debe determinar la posición angular de un codificador de rotación que gira muy rápidamente, además se debe determinar la dirección de rotación.
High speed angle measurement with direction control
The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled
|
|
|
Karta :
|
APP N° 267
|
Distinción de color de vasos de plástico Se deben distinguir vasos de plástico de color rojo brillante de otros de color negro brillante. Se debe observar que la distancia desde el sensor hasta los vasos puede modificarse en varios mm.
Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
|
|
|
Karta :
|
APP N° 266
|
Detección de la separación de una cinta de embalaje de plástico Se debe detectar ópticamente en modo de reflexión la separación de una cinta de embalaje de plástico negro brillante .
Detection of the section point on black nonmetallic strapping
The section point on a shiny black nonmetallic strapping should be detected optically in the reflective way.
|
|
|
Karta :
|
APP N° 265
|
Detección de una etiqueta roja brillante Se debe controlar la presencia de una etiqueta de color rojo brillante en una caja de plástico negro.
Detection of a red shiny plastic label
The presence of a shiny red plastic label on a black plastic component should be detected.
|
|
|
Karta :
|
APP N° 264
|
Detección de una marca roja en una extrusión de aluminio redonda Se debe detectar una marca roja en una extrusión de aluminio redonda. La pintura de color rojo se aplica en un proceso anterior donde hay defectos metalúrgicos de la extrusión. Se debe observar que el color rojo, debido a las diferentes formas de recubrimiento (manual o automatizado), puede variar en gran medida y, además, puede tener raspaduras debido al transporte. Además se debe tener en cuenta la suciedad de las extrusiones, ya que se almacenan parcialmente al aire libre y las cintas de acero que se utilizan como amarre pueden formar óxido en la superficie de aluminio.
Detection of a red color mark on an aluminum rod
The task is to detect a red color mark on an aluminum rod (the red color mark informs about defect metallurgic domains in the aluminum rod). At this, the red paint which is used for color marking can differ and furthermore it can happen that the color mark is partly scraped. In addition an aluminum surface can be contaminated with rust (comes from a steel band, which is used for fixing the rods in a former process), which drifts also into the red color.
|
|
|
Karta :
|
APP N° 263
|
Distinción de color de una consola central negra de otra marrón Se debe distinguir una consola central de plástico de color negro de otra color marrón oscuro. Se debe observar que las superficies de los dos componentes tienen un brillo muy fuerte.
Color differentiation of a black and brown center console
A black and dark brown plastic center console should be differentiated. It has to be into account, that the surface where the color should be controlled is very shiny.
|
|
|
Karta :
|
APP N° 262
|
Distinción de color entre una estera marrón y otra negra en una consola central Se debe distinguir una estera de plástico negro, ya colocada, de otra estera de plástico de color marrón en una consola.
Color differentiation between a brown and a black cap in a console
A brown plastic cap should be differentiated from a black plastic cap in a console.
|
|
|
Karta :
|
APP N° 261
|
Control del material de sellado de LEDs SMD Se debe supervisar el nivel de llenado de un material de sellado ópticamente transparente de LEDs SMD. No se debe exceder una cierta altura (llenado excesivo).
Overfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling.
|
|
|
Karta :
|
APP N° 260
|
Control de nivel en un material de sellado en transparentes LEDs SMD Se debe controlar el nivel de un material de sellado en LEDs SMD respecto a llenado insuficiente.
Underfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with a view to underfilling.
|
|
|
Karta :
|
APP N° 259
|
Control de color de galletas Durante la producción, se debe supervisar el color de galletas.
Color control of cookies
During the production of cookies the color should be controlled.
|
|
|
Karta :
|
APP N° 258
|
Control de nivel de líquidos en tubos ópticamente semitransparentes Se debe supervisar el nivel de líquido en un tubo semitransparente. Se puede tratar de diferentes líquidos: agua, detergente o líquidos lechosos. Sin embargo, siempre se utiliza el mismo tipo de tubo. Además, se debe observar que ni espuma ni una película de líquido sobre la pared interior del tubo pueden afectar, aunque sea ligeramente, el resultado.
Liquid level control from liquid in semi transparent tube
The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level.
|
|
|
Karta :
|
APP N° 257
|
Detección de una capa de silicona transparente sobre tapones de goma Se debe detectar una capa de silicona sobre tapones de goma. También se deben supervisar los tapones, que son de tamaños diferentes.
Detection of transparent coating on rubber seals
The coating of rubber seals should be detected. At this, different types should be controlled with the same sensor, thus the spot size of the sensor must fit to the smallest rubber size and should of course deliver proper results from the bigger seals, too.
|
|
|
Karta :
|
APP N° 256
|
Recuento de bandejas metálicas en una unidad de refrigeración de agua o de aceite Se debe determinar el número de bandejas de metal en un paquete durante el movimiento.
Counting of dishes for water cooling systems
The number of dishes in a package should be counted during the movement of the package.
|
|
|
Karta :
|
APP N° 255
|
Monitoreo de una película sobre una pieza metálica durante la rotación Se debe monitorear la presencia continua de una película de aceite sobre toda la circunferencia de una pieza metálica.
Detection of the presence of an oil film on a turned metal part
The presence of an oil film without gap should be controlled on a turned metal part.
|
|
|
Karta :
|
APP N° 254
|
Detección de muescas en una superficie de aluminio Se deben detectar muescas en una superficie de aluminio.
Detection of punch marks in aluminum surface
Punch marks in aluminum surface should be detected.
|
|
|
Karta :
|
APP N° 253
|
Detección de un sello sello azul en una superficie de aluminio Se debe detectar una marca azul aplicada con un sello. Se debe observar que, dependiendo de la concentración del disolvente en la tinta en la almohadilla de tinta, puede ser más o menos intensa.
Detection of a stamped blue mark on aluminum housing
A stamped blue mark should be detected on aluminum housing. At this, the degree of strength of the blue lacquer is changing dependent of the moisture content of the color.
|
|
|
Karta :
|
APP N° 252
|
Detección de la línea divisoria de una cinta de plástico blanca Se debe detectar la línea divisoria de una cinta de plástico de color blanco por medio de un sensor que opera en el modo de luz reflejada.
Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.
|
|
|
Karta :
|
APP N° 251
|
Distinción de color de tres piezas de plástico en el ámbito interior Se deben distinguir piezas de plástico grises, negras y marrones que se utilizan en partes interiores. Se debe observar que hay muy poco lugar para los sistemas de control, por lo que es preferible trabajar con un sistema de fibra óptica.
Color differentiation of plastic interior parts
Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor.
|
|
|
Karta :
|
APP N° 250
|
Control de presencia de una imprimación en una superficie de aluminio anodizada negra Se debe controlar la presencia ininterrumpida de una imprimación sobre una superficie de aluminio anodizada negra. El sensor puede rastrear el contorno del cuerpo de aluminio con ayuda de una unidad de ajuste x, y.
Presence control of a primer on black anodized aluminum
The presence of a primer coating on black anodized aluminum should be controlled.
|
|
|
Karta :
|
APP N° 249
|
Control de presencia de una masa de sellado Se debe controlar la banda de sellado negra brillante en una carcasa de aluminio anodizada negra respecto a oquedades.
Sealing bead presence control
The presence of a sealing bead on aluminum housing should be controlled. Gaps should be detected.
|
|
|
Karta :
|
APP N° 248
|
Control de la ubicación de un muelle en espiral asimétrico Se debe controlar la correcta ubicación de un muelle en espiral asimétrico.
Attitude control of an asymmetric spiral spring
The attitude of an asymmetric suppressed spring should be controlled.
|
|
|
Karta :
|
APP N° 247
|
Control de presencia de fibras de carbono en una aguja Se debe supervisar la presencia de un haz de fibras de carbono en una aguja. Se debe observar que para el sensor hay poco espacio y sólo puede ser ubicado en la dirección de la aguja.
Presence control of carbon fibers on a sewing needle
The presence of a carbon fiber bundle on a sewing needle should be controlled. It has to be taken into account, that there is only space for the sensor in the direction of the sewing needle.
|
|
|
Karta :
|
APP N° 246
|
Medición de brillo de la capa de imprimación en un ala de turbina eólica Se debe medir sin contacto el factor de brillo de un revestimiento de imprimación de un ala de turbina eólica. Para este propósito, se monta un sensor de brillo en un robot y se lo mantiene a una distancia de 15 mm de la superficie de imprimación. Al mismo tiempo, la pala de turbina eólica se mueve horizontalmente debajo del sensor de brillo. Normalmente, el grado de brillo debe tener un valor de menos de 5, de modo que la capa que sigue a la imprimación obtenga una buena adhesión.
Gloss measurement of the primer surface on a vane
The gloss factor of the primer surface of vanes from wind turbines should be measured contactless. At this, the gloss sensor is mounted on a robot and will be moved vertically to make sure, that the distance to the primer surface of the vane remains approximately at 15mm, simultaneously the vane will be moved horizontally so that the gloss factor can be measured along the long axis of the vane. Normally the gloss factor of the primer surface should be lower than 5 in order to guarantee that the following coating get a fix compounding to the primer surface.
|
|
|
Karta :
|
APP N° 245
|
Detección de marcas de color en fibras de vidrio Se deben detectar marcas de color en fibras de vidrio revestidas. La velocidad de transporte de las fibras de vidrio es de unos 10 m / s.
Color mark detection on an optical fiber
Color marks should be detected on optical fibers. The rate of feed is around 10m/s.
|
|
|
Karta :
|
APP N° 244
|
Control de color del recubrimiento de plástico de fibras ópticas Se debe controlar el revestimiento de plástico de una fibra óptica. Se deben controlar raspaduras y la contaminación de la fibra óptica, incluso a una velocidad del producto de 10 m / s.
Color control of the coating of an optical fiber
The coating of an optical fiber should be controlled. At this, cuttings and soiling should be detected, even at a product speed of up to 10m/s.
|
|
|
Karta :
|
APP N° 243
|
Alineación posicional de un hilo fluorescente incorporado a una tela Para la alineación posicional se utiliza un hilo fluorescente. Se emplea luz UV (365 nm a 385 nm) para que se ilumine el hilo (en rango verde).
Position control of a fluorescent thread in a fabric
The position of a fluorescent thread in a fabric should be controlled. UV light (365nm to 385nm) is necessary for excitation of the fluorescent material. The fluorescent material emits light in the visible range (green).
|
|
|
Karta :
|
APP N° 242
|
Control de presencia de una lámina de plástico ópticamente transparente Se debe supervisar la presencia de una lámina de plástico transparente. Se debe observar que el sensor debe ser colocado al menos a 1 m de distancia de la lámina y que, además, la lámina vibra con una amplitud de unos pocos milímetros.
Presence control of an optical transparent plastic film
The presence of a transparent plastic film should be controlled. At this, the distance of the sensor to the plastic film should be in minimum 1m and it should be noticed, that the plastic film can flutter a few millimeters.
|
|
|
Karta :
|
APP N° 241
|
Detección de marca de color en una película de plástico impresa Se debe detectar una marca de impresión negra en una película de plástico impresa colorida. La marca debe poder distinguirse tanto del fondo transparente como también de las otras tintas.
Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.
|
|
|
Karta :
|
APP N° 240
|
Supervisión de concentricidad de un disco Se debe controlar la concentricidad de un disco que gira rápidamente
Concentric runout control of a wheel
The concentricity of a high speed wheel should be controlled.
|
|
|
Karta :
|
APP N° 239
|
Detección de una marca de color en una hoja de plástico transparente Se debe detectar una marca de color en una película de plástico transparente. La aplicación se encuentra en el rango Ɛx, es decir, es preferible utilizar fibras ópticas.
Detection of a color mark on a transparent plastic film
A color mark on a transparent plastic film should be detected. The sensor is used in the Ɛx – range, thus, an optical fiber unit is necessary.
|
|
|
Karta :
|
APP N° 238
|
Detección de una línea grabada en la banda de rodadura de una polea Dentro de la banda de rodadura de una polea negra se debe detectar con precisión una marca de línea grabada durante la rotación de la polea.
Detection of a line engraving on the bearing surface of a pulley
An engraved line on the bearing surface of a black pulley should be detected.
|
|
|
Karta :
|
APP N° 237
|
Control de posición de marcas de color Se debe determinar la posición de marcas de color en láminas de aluminio o plástico. Tanto el fondo como la marca de color pueden variar de un lote a otro. Por lo tanto, se debe utilizar un sistema flexible que puede ser adaptado a las condiciones particulares sin ningún problema. Además de una señal digital que proporciona información sobre la cobertura del 50% del punto de luz del sensor, también se requiere una señal analógica, la que indique la posición relativa de la marca de color bajo el punto de luz: 5 V representa el 50% de cobertura del punto de luz por la marca de color, se indican 0 V y 10 V, según si el fondo es más claro (entonces 10 V) o más oscuro (entonces 0 V).
Color mark position control
The position of printed color marks on aluminum foils and plastic films should be controlled. At this, the sensor system should deliver an analogue signal which is proportional to the position of the color mark. At this, the color of the background as well as of the color mark can change from batch to batch, which means, that a flexible “easy to handle” system is required. Beside the digital output (a signal change should happen if the light spot is covered by 50% of the color mark) there is an analog output desired, which informs about the actual position of the color mark: 5V means, that the light spot covers to 50% the color mark and 0V and 10V shows, that the light spot falls either only onto the background or onto the color mark.
|
|
|
Karta :
|
APP N° 236
|
Detección de un cable pelado dentro de un conjunto de cables Se debe detectar la parte desnuda de un cable dentro de varios cables trenzados.
Detection of uninsulated cables in a twisted cable assembly
Uninsulated cables should be detected in a twisted cable assembly.
|
|
|
Karta :
|
APP N° 235
|
Distinción de color de dos piezas de plástico lacadas Deben distinguirse claramente dos piezas de plástico cuyos colores se parecen entre sí.
Color differentiation of spray lacquered plastic parts
Two different colored plastic components should be distinguished.
|
|
|
Karta :
|
APP N° 234
|
Detección de bordes de una tela Se debe detectar la posición lateral de una tela de malla gruesa dentro de un rango de medición de 20 mm. La precisión requerida es de ± 2 mm y el ancho de banda analógico debe ser de unos pocos Hz.
Edge detection of a fabric
The lateral position of a wide-meshed fabric should be controlled in a range of 20mm. At this, the necessary accuracy should be ±2mm and the bandwidth of the analogue output signal has to be a few Hz.
|
|
|
Karta :
|
APP N° 233
|
Detección de etiquetas fluorescentes en envases de láminas metálicas Se debe controlar la presencia de una etiqueta de papel fluorescente azul (bajo influencia de luz UV - con 365 nm ... 385 nm) en la parte delantera y en la parte posterior de envases de láminas metálicas doradas o plateadas.
Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.
|
|
|
Karta :
|
APP N° 232
|
Determinación de diámetro y control de posición de una varilla de vidrio, tal como se utiliza en la producción de fibras ópticas. Se debe medir el diámetro (20 mm ... 90 mm), así como la posición de una varilla de vidrio, material original para fibras ópticas.
Diameter measurement and position control of glass rods
The diameter as well as the position of glass rods, the starting product of optical fibers, should be measured. Typical diameters of glass rods are in the range of 20mm to 90mm.
|
|
|
Karta :
|
APP N° 231
|
Detección de rayas en tapas de plástico de color transparentes Se deben detectar rayas en tapas de plástico de color transparentes durante su rotación.
Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.
|
|
|
Karta :
|
APP N° 230
|
Control del color de tapas de plástico transparente Se debe supervisar el color de tapas de plástico transparentes. Se debe observar que de un lote a otro se deben supervisar distintas tapas y la tarea se trata también de mantener el producto en el rango de tolerancia permitido.
Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.
|
|
|
Karta :
|
APP N° 229
|
Detección de marca de color en semicubiertas de cojinetes Se deben detectar marcas de color rojo, verde y amarillo, así como también la superficie sin marcar de una semicubierta de cojinete. Se debe observar que la marca de color, también parcialmente raspada, o sea cuando existen restos de color, se debe reconocer como el mismo color.
Detection of color marks on slide bearing shells
Red, green and yellow color marks as well as no color mark on slide bearing shells should be detected and distinguished. It should be taken into account that the color mark should be detected even if it is partially removed.
|
|
|
Karta :
|
APP N° 228
|
Control de excentricidad de poleas Durante una revolución, se debe supervisar la dimensión x de una polea.
Eccentricity control of belt pulley
The eccentricity of belt pulley should be controlled. The dimension x should be controlled over the whole circle.
|
|
|
Karta :
|
APP N° 227
|
Control de diámetro de diferentes cables durante la producción Durante el proceso de fabricación, se debe supervisar el diámetro de diferentes cables de metal.
Diameter control of different wires during the production
The diameter of different metal wires should be controlled during the production process.
|
|
|
Karta :
|
APP N° 226
|
Control de color de una lámina de holograma transparente Durante la producción, se debe controlar una película de holograma transparente respecto al comportamiento de reflexión espectral. La luz blanca incide perpendicular a la lámina de holograma, el receptor se debe ubicar por debajo de 30 ° a la vertical. El plano que es atravesado por los dos ejes ópticos es perpendicular a la dirección de alimentación de la lámina de holograma.
Color control of a holographic transparent film
During the production of a holographic transparent film the color should be inline controlled. At this the color can only be detected under an angle of 30° to the vertical axis if the light falls perpendicular onto the holographic film. Furthermore the frontend should be directed perpendicular to the transport direction of the holographic film.
|
|
|
Karta :
|
APP N° 225
|
Distinción del color de tres piezas de plástico del ámbito interior Se deben controlar piezas de plástico de color diferentes.
Color differentiation of three different plastic components in the interior field
Three different colored plastic parts should be differentiated.
|
|
|
Karta :
|
APP N° 224
|
Distinción de envases de plástico de espesor diferente Se deben controlar envases de plástico de mismo color y forma, pero de espesor diferente.
Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.
|
|
|
Karta :
|
APP N° 223
|
Control de color de coladores de plástico Se deben detectar variaciones de color de coladores de plástico.
Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
|
|
|
Karta :
|
APP N° 222
|
Control de presencia de un manguito en una aguja de inyección Se debe controlar la presencia de un manguito en una aguja de inyección.
Sleeve presence control on an injection needle
The presence of a sleeve on an injection needle should be controlled.
|
|
|
Karta :
|
APP N° 221
|
Control de presencia de un lubricante en un componente electromecánico Se debe detectar la presencia de un lubricante en un componente electromecánico.
Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
|
|
|
Karta :
|
APP N° 220
|
Detección de una estructura reticular en una tira de vellón Una tira de vellón tiene en el frente una estructura reticular de estampado, mientras que en la parte posterior no tiene ningún estampado. Se debe distinguir una parte de otra.
Lattice texture presence control on a fleece stripe
The presence of a lattice texture on a fleece stripe should be controlled.
|
|
|
Karta :
|
APP N° 219
|
Detección de una línea de oro repujado sobre una lámina de plástico semitransparente Se debe detectar una línea de color dorado impresa en papel de plástico semitransparente.
Line detection on printed semi transparent plastic film
A golden colored line should be detected on a semi transparent plastic film.
|
|
|
Karta :
|
APP N° 218
|
Control de superficie de bisagras Se debe controlar la superficie de diferentes bisagras en lugares específicos. Se debe distinguir entre una superficie brillante y una mate.
Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
|
|
|
Karta :
|
APP N° 217
|
Distinción de una superficie de vidrio esmerilada de otra pulida Durante el transporte de discos de vidrio planoparalelos se debe distinguir el frente pulido del lado trasero esmerilado.
Differentiation of the polished surface from the grinded surface of a glass plate
During the handling of glass plates the position of the polished surface must be controlled.
|
|
|
Karta :
|
APP N° 216
|
Control de presencia de una capa de papel en una chapa de aluminio Se debe supervisar la presencia de una capa de papel en chapas de aluminio anodizado de diferentes colores.
Presence control of a paper sheet on an aluminum plate
The presence of a paper sheet on different colored aluminum plates should be controlled.
|
|
|
Karta :
|
APP N° 215
|
Medición de espesores de chapa sin contacto Se debe medir sin contacto el espesor de chapas. Se debe observar que la chapa no está siempre la posición exacta, es decir, puede ser provista sólo dentro de un cierto rango de tolerancia.
Noncontact thickness measurement of metal sheets
The thickness of metal sheets should be measured, but contactless.
|
|
|
Karta :
|
APP N° 214
|
Control de presencia de una capa ópticamente transparente Se debe detectar una capa ópticamente transparente, aplicada a lamas de parquet. A la capa se le añade un agente fluorescente; cuando se utiliza luz UV (365 nm ... 385 nm), brilla en azul.
Detection of the presence of final UV fluorescent coating of laminate
The presence of the upper layer of a laminate should be controlled. At this, the layer is UV fluorescent.
|
|
|
Karta :
|
APP N° 213
|
Detección de formación de espuma en un líquido Se debe controlar la presencia de espuma en un líquido. Además, se debe determinar el nivel de líquido (inclusive altura de la espuma).
Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
|
|
|
Karta :
|
APP N° 212
|
Detección de un adhesivo fluorescente en papel de paquetes de cigarrillos La unión del papel de paquetes de cigarrillos consiste de adhesivo fluorescente negro. Usando luz ultravioleta, la etiqueta emite luz en el rango azul.
Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.
|
|
|
Karta :
|
APP N° 211
|
Control de presencia de una capa de cera sobre un alambre de acero Se debe detectar una capa de cera fluorescente en un alambre de acero. La capa de cera se puede hacer brillar en el rango de longitud de onda azul usando luz UV.
Presence control of wax coating on steel wire ropes
The presence of wax coating on steel wire ropes should be controlled. The wax is supplied with fluorescent additives.
|
|
|
Karta :
|
APP N° 210
|
Detección de doble hoja de chapas de troquelado en la industria automotriz Durante el transporte de piezas de chapa metálica por medio de un robot, es posible que en lugar de una, se retiren de la pila dos o más hojas.
Double sheet control of stamping parts in the automotive industry
During the handling process of stamped metal parts it happens, that instead of one part two or more parts will be sucked up from a robot.
|
|
|
Karta :
|
APP N° 209
|
Control de brillo de anillos de corte Se deben distinguir dos componentes que se diferencian en el brillo
Gloss control of cutting rings
The gloss of cutting rings should be controlled. Two components, different in gloss, should be distinguished.
|
|
|
Karta :
|
APP N° 208
|
Detección de una tira fotosensible sobre una placa de metal Se debe detectar una tira sensible foto en una placa de metal. Se debe observar que, debido al material fotosensible, no se debe trabajar en el rango visible, sino en el rango IR.
Detection of a photosensitive stripe on a metal plate
A photosensitive stripe should be detected on a metal sheet. At this, lightning sources which are working in the visible range cannot be used.
|
|
|
Karta :
|
APP N° 207
|
Detección de protectores diarios durante el transporte en una correa doble Los protectores diarios se transportan entre dos cintas. La cinta los debe reconocer, ya que ni desde arriba ni desde el lado se da la posibilidad de colocación de sensores.
Detection of a gap between successive hygiene articles during the transportation in a conveyor belt
Panty liners will be transported between two belts. The beginning as well as the end of a panty liner should be detected. Furthermore, a gap between two successive panty liners should be detected. The only practicable possibility is to look through the two conveyor belts.
|
|
|
Karta :
|
APP N° 206
|
Control del color de dos burletes de puerta diferentes Se deben diferenciar dos tiras aislantes de plástico que se diferencian ligeramente entre sí por el color.
Color differentiation of brown plastic door seals
Two different brown colored plastic seals should be differentiated.
|
|
|
Karta :
|
APP N° 205
|
Separación de color de tiras diferentes de aislamiento de plástico blancas y grises Se deben distinguir unas de otras tiras aislantes de plástico de diversos tonos blancos y grises.
Color differentiation of plastic stripes
Different colored plastic stripes should be differentiated.
|
|
|
Karta :
|
APP N° 204
|
Detección de exactitud de la posición de tornillos Se debe controlar la posición correcta de los tornillos en una guía mecánica.
Detection of the alignment of a screw
The alignment of screws in a mechanical guide should be controlled.
|
|
|
Karta :
|
APP N° 203
|
Control de presencia de un manguito de montaje y desmontaje en una aguja hipodérmica Se debe monitorear la presencia de de un manguito de montaje y desmontaje en una aguja hipodérmica.
Presence control of the sleeve on an injection needle
The presence of a sleeve should be controlled.
|
|
|
Karta :
|
APP N° 202
|
Detección de una marca de referencia en una lámina de aluminio Se debe detectar una marca de referencia láser en una lámina de aluminio. La lámina puede ser transportada a una velocidad de hasta 60 m / min.
Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
|
|
|
Karta :
|
APP N° 201
|
Control de color de tapones roscados de plástico Se deben controlar diferentes tapones de rosca respecto al color. Se debe observar que cada color de un tapón esté dentro de las tolerancias predeterminadas.
Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.
|
|
|
Karta :
|
APP N° 200
|
Control de color de preformas de PET Se debe monitorear el color de preformas de PET extremadamente oscuras.
Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
|
|
|
Karta :
|
APP N° 199
|
Detección de una marca de referencia láser en un papel de aluminio y distinción de forma simultánea de una tira láser. Se debe detectar una marca de referencia láser en papel brillante de aluminio, además se debe distinguir esta marca de referencia de la tira láser más estrecha, también presente.
Detection of a lasered reference mark on an aluminum foil and differentiation from a lasered stripe
A lasered reference mark on a shiny aluminum foil should be detected. A proper detection of the reference mark should be guaranteed, which means, that the lasered stripe must not be detected as a reference mark.
|
|
|
Karta :
|
APP N° 198
|
Control del color de sangre en vidrios de laboratorio Debe monitorearse el color de sangre en vidrios de laboratorio. Se debe observar que en los vidrios de laboratorio puede variar el nivel.
Color control of blood in a laboratory glass
Blood in a laboratory glass with different liquid level should be color controlled.
|
|
|
Karta :
|
APP N° 197
|
Control de color inline de papel abrasivo Durante la producción, debe monitorearse el color de papel abrasivo.
Inline color control of abrasive material
Abrasive band material should be inline color controlled.
|
|
|
Karta :
|
APP N° 196
|
Control de presencia de los orificios de contacto de una pieza estampada En una pieza estampada que se ha encajado en plástico, se deben inspeccionar visualmente los agujeros de contacto , ya que puede suceder que se forme un fino de recubrimiento plástico durante el proceso de inyección.
Optical control of electrical contacts on a partly plastic covered stamping part
In the error case the electrical contacts of a stamping part can be slightly covered with a thin plastic film. This should be detected with an optical system.
|
|
|
Karta :
|
APP N° 195
|
Diferenciación de aceites de motor Se deben distinguir diferentes tipos de motor. Para ello, se puede utilizar la fluorescencia inherentemente existente de los aceites orgánicos. Además, estos aceites se mezclan con diversos aditivos para que cuando se excite la fluorescencia con luz UV, se muestre de diferentes colores.
Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
|
|
|
Karta :
|
APP N° 194
|
Detección de un borde en una llanta de aluminio Se debe detectar el borde en la banda de rodadura de una llanta de aluminio. La llanta gira a aproximadamente 50 U / min.
Detection of an edge in an aluminum wheel rim
The edge in an aluminum wheel rim should be detected. The speed of the wheel rim is around 50 rpm.
|
|
|
Karta :
|
APP N° 193
|
La detección de una marca fluorescente en un paquete estampado Se debe detectar una marca fluorescente, que se ilumina de color amarillo bajo la luz UV, en el lado frontal de un paquete estampado.
Detection of a fluorescent mark on a metal sheet matrix
A fluorescent mark on the top side of a metal sheet matrix should be detected.
|
|
|
Karta :
|
APP N° 192
|
Control de presencia de un revestimiento fluorescente en una lengüeta de caucho Se debe examinar una lengüeta de caucho, como se utiliza para puertas de automóviles, respecto a la presencia de una capa fluorescente. En este caso, la capa fluorescente emite luz azul bajo la influencia de la luz UV.
Control of the presence of a fluorescent film on a rubber lip
A rubber lip for car doors is coated with a thin fluorescent film. The presence of this film should be checked during the production.
|
|
|
Karta :
|
APP N° 191
|
Distinción de color de sensores ultrasónicos Se deben controlar sensores ultrasónicos, como los utilizados en la industria del automóvil, respecto al color. Se debe observar que la superficie a comprobar tiene un brillo muy fuerte.
Color differentiation of ultrasonic sensors
Ultrasonic sensors for the automotive industry should be color differentiated. At this, the shiny surface of the ultrasonic sensors causes normally a high direct reflection.
|
|
|
Karta :
|
APP N° 190
|
Detección de una brecha de material En una franja de tela se debe detectar una brecha. En este caso, el color de los materiales puede variar enormemente de un lote a otro.
Detection of a gap in a fabric
In a fabric a gap should be detected. At this different colored fabric (from dark to bright) are possible.
|
|
|
Karta :
|
APP N° 189
|
Control inline de color de cables recubiertos de oro Durante el proceso de producción, se deben controlar cables revestidos de oro. Además, deben detectarse defectos locales, tales como muescas. La velocidad de producción es en este caso aproximadamente 10 m / s.
Inline color control of a golden coated wire
A golden coated wire should be controlled during the production process. Furthermore, local defects like grooves should be detected. At this, the production speed of the wire is approximately 10 m/s.
|
|
|
Karta :
|
APP N° 188
|
Control de color inline de cables aislados y alambres Durante la producción de cables, se debe supervisar inline el color de los aislamientos de plástico. Se debe observar que el brillo de la superficie del aislamiento puede variar debido a cambios de temperatura y humedad, por lo que se debe utilizar un sensor de color que puede suprimir casi por completo el efecto de brillo.
Inline color control of insulated cables
During the production the color of a plastic insulation should be controlled (e.g. brown and red insulated cables). At this the gloss of the plastic surface can be changing due to temperature and humidity changes. Therefore a sensor should be used which is independent of the gloss of the surface.
|
|
|
Karta :
|
APP N° 187
|
Detección de una etiqueta de plástico transparente sobre una película de plástico transparente Se debe detectar la posición de una etiqueta transparente sobre una película transparente como material de soporte. La velocidad de transporte del material de soporte es de algunos m / s.
Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
|
|
|
Karta :
|
APP N° 186
|
Detección de costura de soldadura en una banda de metal Se debe detectar una costura de soldadura en una banda de metal. La soldadura tiene distintas apariencias, también puede darse una soldadura biselada.
Welding line detection on a metal stripe
A welding line on a metal stripe should be detected. At this, the welding line looks different, even a grinded welding line is possible.
|
|
|
Karta :
|
APP N° 185
|
Medición del brillo de una superficie de vidrio de un panel fotovoltaico Durante la producción, se debe medir el brillo de la cubierta de cristal de un panel fotovoltaico
Gloss measurement of the glass surface of a photo voltaic panel
The gloss factor of the glass cover of a photo voltaic panel should be measured during the production.
|
|
|
Karta :
|
APP N° 184
|
Control de doble capa de material de vellón Se debe distinguir entre una y dos capas de material de vellón.
Double layer control of fleece material
It should be differentiated between one and two layers of a fleece material.
|
|
|
Karta :
|
APP N° 183
|
Distinción de la parte delantera de la parte posterior de una estera de aislamiento acústico Se debe distinguir la parte frontal de la posterior de un material aislante.
Differentiation of front side and back side from a sound damping carpet
The front side should be distinguished from the back side of a sound damping carpet.
|
|
|
Karta :
|
APP N° 182
|
Detección de una marca roja en una placa de MDF Se debe detectar una línea roja en la superficie de una placa MDF. Se debe observar que tanto la intensidad de la capa de pintura, así como el color pueden diferir ligeramente. Por otra parte, también la estructura de la superficie de MDF puede cambiar de fino a grueso.
Detection of a colored line on a MDF plate
A red colored line should be detected on the surface of a MDF plate. At this, the color of the stripe differs in intensity and slightly in color. Furthermore the structure of the MDF surface can also changing from coarse to fine.
|
|
|
Karta :
|
APP N° 181
|
Control de color con alambres de acero revestidos de latón Se debe supervisar la calidad de alambres de acero revestidos de latón. El color proporciona información sobre el espesor de la capa de latón.
Color control of brass coated steel wires
The quality of brass coated steel wires should be controlled. At this, the color of the wire delivers information about the thickness of the coating.
|
|
|
Karta :
|
APP N° 180
|
Detección de una línea perforada en una lámina de plástico Se debe detectar una línea perforada en una banda laminar de plástico. Se debe observar que la lámina de plástico se transporta con unos pocos m / s y el diámetro de los agujeros está en el rango de 0,3 mm.
Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
|
|
|
Karta :
|
APP N° 179
|
Detección de una doble costura en cuero o imitación de cuero en el ámbito interior Se debe detectar la presencia de una doble costura en cuero o imitación de cuero de color diferente.
Detection of the seam of leather and leather imitation components
The seam of leather and leather imitation components should be detected.
|
|
|
Karta :
|
APP N° 178
|
Detección de borde de una etiqueta de plástico en una película de plástico Se debe detectar el borde de una etiqueta se encuentra en una película de plástico.
Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.
|
|
|
Karta :
|
APP N° 177
|
Detección de la articulación en la banda de rodadura de una llanta de aluminio Se debe detectar la articulación en la banda de rodadura de una llanta de aluminio.
Detection of a joint on a wheel rim
A joint on an aluminum wheel rim should be detected. At this, the wheel is rotating with a speed of 50 rpm.
|
|
|
Karta :
|
APP N° 176
|
Distinción del color de botellas de plástico Durante el proceso de reciclaje, se deben seleccionar botellas de PET de color diferente. Incluso, las botellas de plástico de PET ligeramente azules deben distinguirse claramente de las botellas de PET transparentes. La velocidad de la botella es de unos pocos m / s. En la botella puede haberse formado agua de condensación, lo que produce gotas de agua dentro de la botella. Además, en las botellas se encuentran etiquetas.
Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
|
|
|
Karta :
|
APP N° 175
|
Distinción de color dos componentes de plástico diferentemente estructurados en el ámbito interior Se deben controlar dos componentes de plástico diferentes en la estructura de recubrimiento. Se debe observar que el color de fondo es el mismo en ambos componentes.
Color differentiation of two different structured plastic moldings
Two different structured plastic components should be distinguished. At this, the background color is exactly the same.
|
|
|
Karta :
|
APP N° 174
|
Distinción de color de cuero o de imitación de cuero en el ámbito interior Se deben distinguir unos de otros varios componentes de interiores.
Differentiation of leather imitations of interior automotive components
Different colored interior components should be distinguished.
|
|
|
Karta :
|
APP N° 173
|
Detección de fugas de costuras de soldadura en aparatos lavavajillas Se deben controlar las soldaduras en lavavajillas respecto fugas. Para este propósito, se pulveriza un líquido fluorescente en el interior por medio de robots y boquilla de pulverización. En el caso de una fuga en la soldadura, una parte del líquido se escapa y se puede detectar usando un sensor con luz UV.
Leak detection of welding lines on dish washers
Leaks should be detected on welding lines of dish washers. At this, a robot equipped with a spray nozzle sprays a fluorescent liquid into the inner chamber of a dish washer. If leaks are present in the welding line, the fluorescent liquid flows through these leaks and can be detected with a fluorescent color detector.
|
|
|
Karta :
|
APP N° 172
|
Conteo de pliegues en tubos de aluminio Después de la operación de corte, se debe controlar el número de pliegues en tubos de aluminio. Los tubos de aluminio se pueden mover con algunos m / s.
Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.
|
|
|
Karta :
|
APP N° 171
|
Distinción de color diferentes textiles para partes interiores Se deben controlar textiles de diferentes colores para ambiente interior.
Color differentiation of fabrics in the interior field of the automotive industry
Different fabrics should be distinguished by color control.
|
|
APP N° 170
|
Control de presencia de una capa de aislamiento en cables finos de metal Se debe medir el diámetro de un alambre fino de metal. El espesor del alambre da información sobre la presencia de una capa aislante.
Diameter control of a metal wire with and without insulation
The diameter of a wire without insulation (Ø 50µm) should be differentiated from a wire with insulation (Ø 110µm).
|
|
|
Karta :
|
APP N° 169
|
Control de color de alambres metálicos plateados Durante la producción, se deben controlar el color y la intensidad de un alambre de metal plateado, de manera que pueda evitarse la falta de homogeneidad en la bobina.
Color control of silver colored metal wires
The color as well as the gray scale of a silver colored wire can differ in a coil. To avoid these inhomogenities the wire should be color controlled.
|
|
|
Karta :
|
APP N° 168
|
Control de color de molduras Se deben controlar molduras de diferentes colores, como las que se utilizan en el sector del automóvil. Se debe observar que los componentes tienen un brillo muy fuerte.
Color differentiation of garnish moldings
Different colored garnish moldings should be distinguished. It has to be taken into account, that the components are very shiny.
|
|
|
Karta :
|
APP N° 167
|
Detección de una marca pulverizada sobre la superficie metálica de un enfriador de agua Durante el montaje, los enfriadores de agua defectuosos o dañados se dotan de una marca pulverizada azul. Pero la intensidad y el tamaño de la marca pueden variar extremadamente.
Detection of spray marks on the metal surface of water cooler
Defective or damaged water coolers will be marked during the assembling process with a blue spray mark. Intensity and size of the color mark, however, differs extremely.
|
|
|
Karta :
|
APP N° 166
|
Control de color y contraste durante la impresión de papel de seguridad Durante la impresión de papel de seguridad, se debe supervisar el color y la escala de grises en una tira de referencia.
Color and contrast control during the printing process of safety paper
During the printing of safety paper the color as well as the contrast should be controlled on two fields on the reference color stripe.
|
|
|
Karta :
|
APP N° 165
|
Control de la superficie de mangueras de ducha Se debe supervisar la superficie de mangueras de ducha de metal respecto a enturbamiento, amarillez o soldadura. Además, también pueden haber cintas de colores, lo que también debe detectarse.
Quality inspection of shower hoses
The surface of shower hoses should be controlled. Failures like slight gray tint, gray tint (bloom), yellow tint surfaces (yellowness) but also a metallic overlap and a red ribbon should be detected.
|
|
|
Karta :
|
APP N° 164
|
Medición de altura de una soldadura y también de una soldadura lijada Se debe medir la altura de una soldadura en chapas de acero. Se debe controlar la soldadura como también el proceso de lijado posterior.
Measurement of the height of a welding line and a polished welding line on a metal sheet
The height of a welding line should be controlled; at this, the presence of the welding line has to be checked before the grinding process and the height of the polished welding line has to be measured after the grinding process.
|
|
|
Karta :
|
APP N° 163
|
Supervisión de una junta de caucho con respecto a lugares fluorescentes amarillos usando luz UV Una junta de caucho está recubierta con una capa de azul fluorescente (usando luz ultravioleta). Se marca un fallo utilizando un medio amarillo fluorescente (también con luz UV). Por un lado, se debe detectar la capa fluorescente azul, por el otro, también el recubrimiento amarillo.
Presence control of a UV fluorescent yellow coating on a rubber seal
A rubber seal is normally coated with a fluorescent layer. This layer is fluorescent in blue if UV light is used. Additionally to this blue fluorescent coating a yellow fluorescent coating is used for marking defect areas on the rubber seal. The task is now to detect the UV fluorescent yellow coating on a rubber seal, which is primary UV blue coated.
|
|
|
Karta :
|
APP N° 162
|
Control de presencia de una etiqueta en un disco de algodón desechable Se debe controlar una etiqueta en un disco de algodón desechable.
Presence control of a label on a nursing pad
The presence of a label on a nursing pad should be controlled.
|
|
|
Karta :
|
APP N° 161
|
Control de ancho de un perfil de poliuretano Durante la producción, se debe monitorear un perfil de poliuretano con sección transversal rectangular respecto a la anchura.
Width control of polyurethane profiles
The width of different colored polyurethane profiles should be measured during the production.
|
|
|
Karta :
|
APP N° 160
|
Control de altura de perfiles de poliuretano Durante la producción, se debe supervisar la altura de diferentes perfiles de poliuretano. Se debe observar que, dependiendo del color del objeto, la luz penetra de forma diferente.
Height control of polyurethane profiles
The height of different colored polyurethane profiles should be controlled. It has to be aware that the polyurethane material is slightly milky which means, that light which is directed onto the profile will partly enter the surface.
|
|
|
Karta :
|
APP N° 159
|
Control del color de las perillas de plástico para ámbito interior interiores Deben distinguirse perillas de plástico, como las utilizadas en el sector del automóvil, respecto al color. Se debe observar que en el lugar de inspección, la orientación de las perillas es aleatoria.
Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
|
|
|
Karta :
|
APP N° 158
|
La detección de bordes de una película de plástico transparente durante la producción Se debe detectar la ubicación de una película de plástico transparente durante el proceso de rebobinado.
Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.
|
|
|
Karta :
|
APP N° 157
|
Distinción de una manilla giratoria cromada mate de otra brillante Se debe distinguir una manilla giratoria cromada mate de otra brillante.
Differentiation of a matt and a glossy chromate knob
A matt chromate knob should be differentiated from a glossy chromate knob.
|
|
|
Karta :
|
APP N° 156
|
Distinción del color de componentes de plástico marrón oscuro y negro en el ámbito interior Se deben detectar ambas piezas de plástico (negro y marrón oscuro). Se debe observar que. a causa de la situación de montaje, se debe controlar tanto la parte delantera y como la posterior.
Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
|
|
|
Karta :
|
APP N° 155
|
Detección de una marca de color impecable en un disco de metal Se debe detectar la presencia de una marca de color en un disco de metal. Se debe observar que incluso las marcas de color parcialmente raspadas se reconocen como errores.
Detection of a proper color mark on a metal disk
The presence of a proper color mark on a metal disk should be detected. The parts with a missing color mark as well as the parts with a color marks which are partly erased should be sorted out.
|
|
|
Karta :
|
APP N° 154
|
Detectar el el soporte del filamento durante el transporte del bulbo de vidrio Durante el transporte lineal de bulbos de vidrio se debe detectar la posición del soporte del filamento. Por razones de espacio, no se puede utilizar el sistema de luz transmitida.
Detection of the distance holders of a filament in a bulb
The position of the distance holders of a filament should be controlled. There is only a chance to use a reflective system due to space reasons. The bulb together with the filament and the holders can be moved position controlled.
|
|
|
Karta :
|
APP N° 153
|
Distinción entre dos piezas giratorias, una con tramo plano y otra con un tramo que tiene un engranaje Se deben distinguir dos piezas giratorias por el proceso de posicionamiento. Ambas partes difieren sólo en un tramo, en la cual en una hay un engranaje y en la otra una superficie plana.
Differentiation between a shaft with and without a tooth system
Two different metal shafts should be differentiated. The one has a flat cylindrical surface whereas the other type comes with a cogwheel.
|
|
|
Karta :
|
APP N° 152
|
Control de presencia controlar un material de sellado fluorescente en una pieza giratoria En una pieza giratoria, se debe supervisar la presencia de un material de sellado fluorescente. Usando luz UV, el material de sellado se ilumina de color azul.
Detection of fluorescent cured glue on a shaft
On a shaft fluorescent glue is used to seal the intersection between the shaft and a roll.
|
|
|
Karta :
|
APP N° 151
|
Distinción entre dos colores de la misma imitación de cuero Se deben distinguir dos imitaciones de cuero negras y, durante la producción, documentar el grado de brillo.
Differentiation of leather imitations
Two black leather imitations should be differentiated and the gloss factor should be documented with a gloss measurement device.
|
|
|
Karta :
|
APP N° 150
|
Control de aguas residuales y clasificación Se deben controlar y clasificar aguas residuales. A tal fin, se deben utilizar visores para la medición, también es posible una inmersión directa en el agua residual.
Waste water detection and classification
Waste water should be detected, controlled and classified. For this purpose sight glasses can be used for the measurement or even dipping the optical front end unit into the waste water is also possible.
|
|
|
Karta :
|
APP N° 149
|
Distinción entre baldosas húmedas y secas Después de la humectación de baldosas se debe controlar si el contenido de humedad se encuentra fuera de la tolerancia permitida. En estado húmedo, la superficie de la baldosa aparece gris, mientras que en estado seco aparece blanca.
Differentiation between water moistened and dry floor tiles
After the moisturization the floor tiles should be checked, whether the amount of moisture is in the right range or out of range (too much or too little moisture content). The tiles looks brighter if the degree of moisture is too small and the tiles looks darker as normal if too much water is on the tiles. In the normal case the tiles looks gray in color.
|
|
|
Karta :
|
APP N° 148
|
Detección de una marca de color en una lata de aerosol Se deben detectar diferentes marcas de color en diferentes latas. Se debe observar que la capa de color puede ser muy brillante, además hay que contar con costuras de soldaduras.
Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.
|
|
|
Karta :
|
APP N° 147
|
Control de presencia de una cinta de color turquesa en la parte posterior de un tampón Se debe monitorizar la posición correcta de una cinta de color turquesa en la parte posterior de un tampón. La posición correcta se caracteriza porque la banda cubre casi por completo la parte posterior del tampón blanco.
Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.
|
|
|
Karta :
|
APP N° 146
|
Reconocimiento de nudos y restos de corteza en postes de madera Se deben controlar postes de madera respecto a nudos y restos de corteza.
Detection of knots and bark in wooden stakes
Wooden stakes should be produced free of knots and bark.
|
|
APP N° 145
|
Distinción entre cables con y sin recubrimiento Se deben controlar cables que con recubrimiento tienen un diámetro de aproximadamente 0,12 mm.
Differentiation of coated wires from uncoated wires
Wires of approximately 0.12mm in diameter must be coated and it should be monitored, whether the coating is present or not.
|
|
|
Karta :
|
APP N° 144
|
Controlar la orientación de azulejos Se debe supervisar la alineación apropiada de los azulejos. Las líneas grabadas se deben alinear respecto a la dirección de transporte transversal y no longitudinalmente.
Position monitoring of tiles
The orientation of tiles on a conveyor belt should be controlled. There are three chamfers which splits the tile into four parts and these chamfers should be perpendicular orientated on the conveyor belt.
|
|
|
Karta :
|
APP N° 143
|
Control de posición la ubicación de un cierre de velcro Se debe supervisar la posición de un cierre de Velcro, si está colocado correctamente o al revés.
Position monitoring of hook-and-loop fasteners
The orientation of Velcro® fasteners should be controlled.
|
|
|
Karta :
|
APP N° 142
|
Control de orientación de la imitación de cuero en el ámbito interior Se debe supervisar la posición de la imitación de cuero (dirección longitudinal / transversal).
Control of the orientation of leather imitation
The orientation of different colored leather imitations should be controlled.
|
|
|
Karta :
|
APP N° 141
|
Control de posición de las arandelas metálicas de inserción en componentes de plástico Se debe monitorear la posición de las arandelas de inserción (lado delantero o trasero arriba) en piezas de plástico.
Position monitoring of washers in plastic components
The orientation of washers (backside or front side above) should be checked. To control from the top (perpendicular to the surface) is not possible due to arrangement reasons.
|
|
|
Karta :
|
APP N° 140
|
Control de presencia de un recubrimiento sobre una superficie de metal Se debe monitorear la presencia de un revestimiento sobre una superficie metálica.
Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.
|
|
|
Karta :
|
APP N° 139
|
Control de presencia de una tapa de plástico transparente Se debe detectar la presencia de una tapa de plástico transparente sobre una pieza de plástico.
Position control of a silicon cap
The position of a semi transparent silicon cap should be controlled.
|
|
APP N° 138
|
Control de excentricidad de una polea de transmisión de aluminio Se debe supervisar la excentricidad de una polea de transmisión de aluminio. La polea de transmisión se utiliza para desenrollar y enrollar material de película, la excentricidad no puede exceder un valor de 10 micras.
Eccentricity control of an aluminum drive disk
The eccentricity of an aluminum driving disk, which is used for winding and rewinding of film strips, should be controlled with an accuracy of approximately 10µm.
|
|
|
Karta :
|
APP N° 137
|
Posicionamiento de una tira de sellado de caucho Se debe posicionar exactamente una tira de caucho.
Positioning of a rubber seal component
A rubber gasket should be exact positioned.
|
|
|
Karta :
|
APP N° 136
|
Control de presencia de una inscripción amarilla en una lengüeta de caucho Se debe detectar la presencia de una impresión de color amarillo en una tira de sellado de caucho negro.
Presence control of an inscription on a rubber seal
On a rubber seal the presence of a yellow inscription should be checked.
|
|
|
Karta :
|
APP N° 135
|
Distinción de los colores de tres resortes en espiral diferentes Se deben distinguir unos de otros tres tipos de resorte en espiral de colores diferentes. Se debe observar que en el lugar de control no está definida la posición de giro.
Color differentiation of three different colored spiral springs
Three different colored spiral spring types should be differentiated. At the position where it should be controlled the position of the coil spring is accidentally oriented.
|
|
|
Karta :
|
APP N° 134
|
Control de presencia de fibras dentro de un tubo de aluminio Se debe examinar un tubo de aluminio de una longitud de aproximadamente 160 mm respecto a la existencia de fibras. El diámetro interior es de 14 mm y el tubo se puede girar durante la inspección sobre su propio eje.
Control of the presence of fibers in an aluminum tube
In aluminum tubes with a length of approximately 160mm and an inner diameter of 14mm the presence of fibers should be checked, at which a good tube is a tube without any fibers. The tubes can be positioned and turned 360° around, around both ends of the tube there is space enough for mounting the sensors.
|
|
|
Karta :
|
APP N° 133
|
Control de color de diferentes carcasas de palanca Se deben supervisar carcasas de palancas de plástico respecto al color. También se deben controlar los componentes individuales de la carcasa.
Color control of different components of a gear box
After the assembling of a gear box, the different components must be controlled in relation to the color.
|
|
|
Karta :
|
APP N° 132
|
Medición de perfil de una piedra esmeriladora Durante su rotación, se debe medir el perfil de una piedra esmeriladora. El sistema de sensores se debe alinear lineal y paralelamente al eje de rotación de la piedra. Se debe abarcar una profundidad de hasta máx. 20 mm.
Profile measurement of an abrasive block
The contour of a grinding stone should be measured. The necessary measurement range is approximately 20mm.
|
|
|
Karta :
|
APP N° 131
|
Distinción del color de los cables de plástico Se deben controlar cables de plástico respecto al color.
Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
|
|
|
Karta :
|
APP N° 130
|
Detección de una franja fluorescente en folletos Durante la producción, se debe detectar una línea fluorescente en folletos bajo iluminación UV. La línea sirve como referencia de que, desde la franja fluorescente, los productos siguientes (por ejemplo, folletos iguales, pero con dirección distinta) deben ordenarse en una nueva pila. Ya al principio de un nuevo trabajo de impresión, el equipo proporciona productos con franja fluorescente para la calibración del sistema de sensores.
Detection of a fluorescent stripe on leaflets
On an advertising material a fluorescent stripe should be detected. Print shops get orders for promotion material from chain of stores. The stores of a chain have exactly the same leaflet except the address of the respective store, thus it must be paid attention during the packaging process in the print shop. At this a fluorescent stripe will be painted onto the first ten leaflets with the other address. At the beginning of the printing process it is possible to teach the sensor onto the fluorescent stripe, thus the fluorescent as well as optical absorption effects from the paper of the advertising material can be compensated.
|
|
|
Karta :
|
APP N° 129
|
Distinción entre agujeros ciegos y roscas ciegas En una pieza de aluminio debe distinguirse entre un agujero ciego y una rosca ciega.
Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
|
|
|
Karta :
|
APP N° 128
|
Control del color de una impresión fluorescente en un paquete de cigarrillos Durante la producción, se deben monitorear el color y la intensidad de una impresión fluorescente bajo la acción de rayos UV. Se debe observar que en la superficie de la caja zonas hay más zonas fluorescentes, que bajo rayos UV se iluminan en azul, mientras que el color a monitorear emite luz verde.
Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).
|
|
|
Karta :
|
APP N° 127
|
Control de diámetro de agujeros Se deben monitorear los diámetros de los agujeros en una pieza de aluminio. Se deben medir agujeros con un diámetro máximo de 8 mm.
Diameter control of holes
The diameter of holes in an aluminum bloc should be controlled. Holes with diameters up to 8mm must be measured.
|
|
|
Karta :
|
APP N° 126
|
Control de color de pintura Durante la producción, se debe controlar inline el color de la pintura. La medición debe efectuarse en el producto y no en la superficie.
Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.
|
|
APP N° 125
|
Posicionamiento de un alambre en un bulbo de vidrio Se debe posicionar con precisión el comienzo de un alambre en un bulbo de vidrio, teniendo en cuenta que el alambre se puede doblar y por lo tanto no está situado en el eje de simetría del bulbo. El diámetro interior del bulbo es de aproximadamente 1,8 mm y el diámetro del alambre es de 0,3 mm.
Positioning of a filament in a bulb
A filament must be positioned precisely into a bulb. It should be noted that the filament can be bent, thus the end of the filament lies not on the symmetrical axis of the bulb. The inner diameter of the bulb is equal to approximately 1.8mm and the diameter of the filament is around 0.3mm.
|
|
|
Karta :
|
APP N° 124
|
Detección de chapas sobre una paleta Las chapas se retiran de una paleta mediante un robot. Se debe evitar que, por un lado que se procese la última hoja, y, por otro, que la paleta sea reconocida y tratada por el robot como una chapa. La paleta puede tener una superficie de placa MDF, de madera o de metal, pero visualmente se diferencia de las chapas.
Detection of a metal sheet on a stack
Metal plates are removed from a stack with a robot. After the last metal sheet is removed a sensor should inform the robot to avoid that the base plate will be sucked up from the robot too. The base plate can consist of MDF (medium density fiberboard), wood, rubber or even a metal which is different from the metal sheet.
|
|
|
Karta :
|
APP N° 123
|
Detección de doble chapa Las chapas se levantan de la pila, en este proceso es posible que en lugar de una placa, se levanten dos placas simultáneamente, lo que se debe impedir por motivos de seguridad. Se debe controlar, inmediatamente después de la retirada de una hoja desde la pila, si de forma involuntaria se transporta más de una hoja.
Double sheet control
Metal plates should be removed from a stack with a robot. The robot sucks the metal sheets one by one and it should be avoided for safety reasons to move two metal sheets simultaneously. A sensor should detect double sheet not from the top but from the side. Furthermore, the system should be adapted automatically after a change of the type of metal sheet (different thickness or different metal).
|
|
|
Karta :
|
APP N° 122
|
Monitoreo de dirección durante el transporte de las cápsulas Se debe controlar la dirección de las cápsulas durante el transporte en una guía mecánica. La mitad de la cápsula con el diámetro más grande debe ir adelante durante el transporte.
La diferencia de diámetro de ambas cápsulas es de aproximadamente 0,3 mm. Las cápsulas son transportadas a una velocidad constante de aproximadamente 0,4 m / s. Deben ser monitoreados varios tamaños de cápsulas de 3 mm a 8 mm de diámetro.
Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
|
|
|
Karta :
|
APP N° 121
|
Control de presencia de un perfil de ranura en una cubierta de plástico transparente En una tapa transparente se debe detectar si el perfil de ranura se encuentra ininterrumpido. En caso de piezas defectuosas, puede suceder que el perfil de ranura exista de forma parcial.
Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
|
|
|
Karta :
|
APP N° 120
|
Control de doble capa de película en un blister Durante la manipulación, es posible que en lugar de una película transparente se transporten varias láminas de plástico, lo que debe ser controlado apropiadamente y evitado siempre que sea posible.
Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.
|
|
|
Karta :
|
APP N° 119
|
Distinción entre dos colores en una franja textil Se deben detectar ambos colores en una franja textil que se utiliza para fundas de asientos.
Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
|
|
|
Karta :
|
APP N° 118
|
Detección del sentido de giro y medición de frecuencia de un rodillo de aluminio Se debe detectar el sentido de giro y la frecuencia de un rodillo de aluminio. Para detectar el sentido de rotación se utilizan las marcas de color ubicadas a los lados del rodillo.
Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
|
|
|
Karta :
|
APP N° 117
|
Control de presencia de un hilo en un rollo de aluminio Un hilo textil está enrollado en una bobina de aluminio. Se debe detectar la presencia del hilo a través de los orificios laterales de la bobina.
Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
|
|
|
Karta :
|
APP N° 116
|
Control de presencia de una espátula de plástico en un empaque de medicamentos Se debe detectar la presencia de una espátula de plástico, que fluoresce bajo luz UV, en un momento en que el lado frontal del empaque todavía está abierto.
Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
|
|
|
Karta :
|
APP N° 115
|
Control de superficie de un cono esmerilado en un engranaje Se debe examinar la superficie de un cono de un engranaje en términos de estrías o marcas gruesas de lijado. El engranaje puede girarse durante la inspección y la distancia entre los sensores de medición al sensor debe ser de aproximadamente 200 mm.
Quality control of the surface of a cone on a cogwheel
The surface of the cone on a cogwheel should be checked. The surface of a proper cone looks very homogeneous; the surface of a bad cogwheel shows grooves and scratches. For investigations the cogwheel can be turned around its axis. The distance from the sensor to the object should be around 200 mm.
|
|
|
Karta :
|
APP N° 114
|
Distinción entre cables de uno y dos colores Durante el proceso de bobinado e inmediatamente después de la aplicación de pintura de un segundo color, el cable debe ser controlado respecto a la presencia del segundo color. Se debe observar que el cable gira una vez alrededor de su propio eje a una velocidad de transporte de 15 m / s durante un período de 0,5 s . Esta rotación se puede utilizar para la consulta sobre la utilización de aplicaciones de pintura, la traza de color toma una anchura de 0,8 mm en un diámetro de cable de 1,35 mm 3 mm.
Differentiation between single-colored and two-colored cables
During the coiling process of cables it has to be checked, whether monochromatic or dichromatic cables will be winded. At this the cables will be transported with a speed of 15 m/s and the cable will be turned 360° in 0.5 seconds around the axis. This turn around its axis can be used for color control. The smallest diameter of the cables is Ø 1.35 mm and the biggest diameter is around Ø 3mm. To produce a two-colored cable, a single-colored cable is used and a line with a width of approximately 0.8mm will be painted onto the cable, hence a white light spot with a diameter of Ø 0.7mm is used for color control.
|
|
|
Karta :
|
APP N° 113
|
Distinción del color de engranajes Se debe distinguir un engranaje recocido negro de un engranaje con tratamiento "natural". La distancia del sensor debe ser de aproximadamente 160 mm.
Color differentiation of cogwheels
The task is to differentiate between black coated and non-coated cogwheels. Furthermore the minimum distance from the sensor to the object should be 160mm.
|
|
|
Karta :
|
APP N° 112
|
Detección de la posición de un borde de metal en rango Ɛx Se debe monitorear la ubicación de un borde de metal en el rango Ɛx través de un rango de medición de aproximadamente 6 mm.
Position control in the Ɛx range
The position of a metal blade should be controlled in the Ɛx range over a measuring range of approx. 6mm.
|
|
|
Karta :
|
APP N° 111
|
Control de goteo en modo de luz transmitida Se debe contar el número de gotas dentro de un periodo de tiempo predeterminado. Además, se debe determinar el volumen de líquido de las gotas.
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
|
|
|
Karta :
|
APP N° 110
|
Control de chorro de aspersión en el rango Ɛx En el rango Ɛx se debe controlar la presencia y volumen de un chorro de aspersión. Se presta para trabajar con fibras ópticas.
Spray jet control in the Ɛx range
For the spray jet control in the Ɛx range (zone 0) the most suitable system is a unit which comes without electronically components in the Ɛx zone, but with fiber optics.
|
|
|
Karta :
|
APP N° 109
|
Detección de una soldadura de un anillo de metal En un anillo de metal se debe detectar la soldadura. El lugar de soldadura se diferencia por el color y por el diámetro respecto al material normal. El anillo metálico se hace girar durante la inspección.
Detection of a welding line on a metal ring
The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around.
|
|
|
Karta :
|
APP N° 108
|
Monitoreo de nodos e inspección de defectos en cables e hilos Se deben detectar nudos y defectos en cables e hilos. Pueden darse diferentes diámetros del producto; la velocidad del producto es de unos pocos m / s.
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
|
|
|
Karta :
|
APP N° 107
|
Control de diámetro de pines en regletas de enchufes Se debe controlar el ancho de pines en las regletas de enchufes.
Pin width control of electrical components
The width of the pins of an electrical component should be controlled.
|
|
|
Karta :
|
APP N° 106
|
Control de altura de pines de componentes eléctricos Durante la producción se debe controlar la altura de pines de componentes eléctricos.
Pin height control of electrical components
The height of the pins of an electrical component should be controlled during the production.
|
|
|
Karta :
|
APP N° 105
|
Control del volumen del chorro de aspersión Se debe controlar el volumen del chorro de aspersión.
Spray jet amount control
The density of the spray jet should be controlled.
|
|
|
Karta :
|
APP N° 104
|
Control de diámetro inline de varillas de madera Durante la producción de varillas de madera se debe controlar su diámetro.
Inline diameter control of wooden staff
During the production of wooden staff the diameter must be controlled while the rod is moved.
|
|
|
Karta :
|
APP N° 103
|
Control de posición múltiple de blisters Durante el proceso de manejo de paquetes blister se debe controlar si de la pila se tomaron uno o más blisters.
Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.
|
|
|
Karta :
|
APP N° 102
|
Determinación de la posición de la espiral de un filamento Debe determinarse la posición de la espiral de un filamento. Hay dos tipos de espiral, que también son diferentes en su longitud. La velocidad de producción es de aproximadamente 0,02 m / s y el diámetro de los filamentos se mueve, dependiendo del tipo, entre 0,3 mm y 1,5 mm, el paso máximo de la espiral es de 1 mm.
Spiral position control on a filament
The position of the spiral coil on a filament for the light bulb industry must be controlled. There are two different types of spirals, different in gapping, on the filament. The speed of the filament is approximately 0.02m/s, the diameter of the filament is dependent of the type (min. 0.3mm and max. 1.5mm) and the maximum gapping of the spiral is 1mm.
|
|
|
Karta :
|
APP N° 101
|
Control de aspersión durante el recubrimiento del interior de botellas de vidrio para la industria farmacéutica Durante la producción de botellas de vidrio para la industria farmacéutica, se recubre el interior, lo que se reconoce porque después del recubrimiento se ponen un poco difusas. En este caso, el recubrimiento se efectúa con un polvo especial a través de la abertura de la botella en su cuello. Durante este proceso, la temperatura de las botellas es de varios cientos de ° C.
Spray-jet control during the glass bottle coating process in the pharmaceutical industry
During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade.
|
|
|
Karta :
|
APP N° 100
|
Medición del brillo inline después de la pintura de puertas de madera Inmediatamente después de la pintura de puertas de madera, debe ser controlado el brillo. Se sabe que la cantidad pintura afecta el nivel de brillo de la superficie; si se utiliza demasiado poca pintura, la superficie se vuelve más áspera.
Gloss inline measurement after the varnish of doors
Immediately after the varnish of the doors the gloss factor should be controlled. Tests have shown that the amount of varnish, which will be sprayed onto the door surface, influences the gloss factor. If not enough varnish is used the surface becomes rough.
|
|
|
Karta :
|
APP N° 99
|
Diferenciación de brillo de color de los componentes de las puertas interiores Las diferencias de color entre los respectivos componentes son relativamente pequeñas, pero debido a las diferentes estructuras se puede notar claramente una diferencia en el factor de brillo.
Color gloss differentiation of door interior components
Different colored interior parts must be differentiated. The color differences between the respective components are relatively small but there is a good difference in the gloss factor due to the different structure of the part.
|
|
|
Karta :
|
APP N° 98
|
Determinación del contenido de aceite residual en aguas residuales Durante la producción de aceites comestibles, debido a la producción, se producen aguas residuales que están mezcladas con restos de aceites orgánicos. El porcentaje permisible de los aceites en este tipo de emulsión, después del proceso de limpieza, debe tener un valor máximo de 500 ppm.
Oil containing waste water detection
On an oil press the amount of oil in the waste water must be controlled. Typical values are 500ppm of flux oil in the waste water and the goal is to reach the 100ppm. At this the fluorescent effect of the flux oil can be used.
|
|
|
Karta :
|
APP N° 97
|
Control de presencia de una franja adhesiva de fieltro en una pieza de plástico del sector de la automoción En una pieza de plástico en el tablero de instrumentos se debe controlar la presencia de una franja adhesiva de fieltro. Además, se deben controlar dos fieltros de colores diferentes.
Presence control of felt textile on dashboard components
On dashboard instruments the presence of felt must be controlled furthermore two felts must be differentiated.
|
|
|
Karta :
|
APP N° 96
|
Distinción lado delantero / lado trasero de un cierre de plástico Durante la producción de cajas de plástico de toallitas húmedas cajas se debe controlar la posición correcta de la cubierta de plástico (lado delantero / lado trasero).
Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
|
|
|
Karta :
|
APP N° 95
|
Control de presencia de una estampilla de impuestos u otro sello en un empaquetado de cigarrillos Los paquetes de cigarrillos deben ser supervisados con respecto a la presencia de una estampilla de impuesto o de otro sello.
Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.
|
|
|
Karta :
|
APP N° 94
|
Supervisión de papel de cigarrillo perforado Durante la perforación por láser de papel de cigarrillo, es posible que aparezcan trazas de quemadura en los bordes de las perforaciones. Visto desde una cierta distancia, esta perforación aparece como franjas grises. El valor de gris de la franja de perforación debe ser supevisado. Se debe controlar no sólo la presencia de trazas de quemadura, sino también la existencia de una perforación.
Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.
|
|
|
Karta :
|
APP N° 93
|
Distinción de piezas de plástico de cromado brillante o mate Se deben distinguir componentes de plástico cromado brillante o mate. Ambas partes tienen la misma forma; son para fijar un sistema de sensores se dispone de 8 mm de altura.
Differentiation of chrome plated shiny and chrome plated matt components
Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end.
|
|
|
Karta :
|
APP N° 92
|
Distinción de color de los componentes de plástico para agujas de inyección Se debe monitorizar el color de los elementos de plástico para agujas de inyección. Dentro del mismo tipo de color, de lote a lote pueden aparecer modificaciones inadmisibles, que después deben ser detectadas.
Color differentiation of syringe capsules
Syringe capsules must be color differentiated. At this, there should be detected also an unacceptable color change from batch to batch of the same capsule type.
|
|
|
Karta :
|
APP N° 91
|
Distinción entre cables de uno y dos colores Durante la producción de cables se deben distinguir los cables de uno y dos colores. Los cables se producen a una velocidad de 15 m / s; se producen diversos diámetros de cable desde 1,35 mm. Los cables giran sobre su propio eje una vez en un tiempo de 0.5 s. La anchura del segundo recubrimiento de color es de 0,8 mm.
Differentiation of a unicolor and a bicolor cable
During the production of cables a differentiation between unicolor and bicolor cable is necessary. The production maximum speed of the cable is approximately 15m/s and the diameter of the smallest cable is around 1.35mm. The cable is rotating around the axis in 0.5 seconds 360° at this velocity. The color stripe of the bicolor cable has a width of about 0.8mm.
|
|
|
Karta :
|
APP N° 90
|
Control de presencia de tapones de corcho en las botellas de vino Durante el embotellado del vino se debe supervisar la presencia de tapones de corcho. Se debe observar que las botellas a supervisar son de diferente altura y color. Además, se debe tener en cuenta las tonalidades diferentes de los corchos.
Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.
|
|
|
Karta :
|
APP N° 89
|
Detección de marcas de color en una precinta de papel Se debe distinguir una marca de color blanco de una tira de color. Aquí pueden haber varios colores en la franja de color (amarillo, marrón, rojo, púrpura, verde y gris). El producto se mueve a una velocidad de 10 m / s, el tamaño de la marca de color es de aproximadamente 6 mm x 4 mm. La posición de la marca de color se debe especificar con precisión.
Color mark detection on a paper banderole
A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark.
|
|
|
Karta :
|
APP N° 88
|
Detección de un recubrimiento adhesivo fluorescente en la parte posterior de una franja abrasiva Se debe detectar si hay existencia ininterrumpida de un recubrimiento adhesivo en la parte posterior de una franja abrasiva. El adhesivo es fluorescente bajo la influencia de la radiación de luz UV en el rango de longitud de onda azul. La distancia desde el detector a la franja abrasiva debe ser de aproximadamente 20 mm y deben poder distinguirse escotaduras de adhesivo de 2 mm x 10 mm.
Fluorescent glue control on an abrasive belt
During the production of abrasive belt material with a 10mm wide glue stripe the presence of the fluorescent glue must be observed. Defects greater than 2mm in length must be proper detected. The distance of the sensor head to the object should be approximately 20mm and the detecting range around 2mm x 10mm.
|
|
|
Karta :
|
APP N° 87
|
Medición del brillo inline de papeles abrasivos El nivel de brillo es una medida de rugosidad de la superficie de una franja abrasiva. Con un medidor de brillo inline se debe monitorear la calidad de la superficie del papel abrasivo.
Inline gloss measurement on abrasive belts
The gloss factor is a significant parameter for the surface quality, the roughness, of an abrasive belt. Thus a gloss measurement inline sensor should be used for quality control of the abrasive surface.
|
|
|
Karta :
|
APP N° 86
|
Distinción de piezas de plástico si hay o no hay escotadura Se deben distinguir piezas de plástico de diferentes colores con cuatro o cinco costillas.
Differentiation of different colored plastic parts with different number of bars
Plastic parts with four (the bar located in the middle is shorter) and five long bars must be distinguished independent of the color.
|
|
|
Karta :
|
APP N° 85
|
Detección de una franja adhesiva blanca en un airbag textil de color rosa Se debe detectar una franja adhesiva en un textil rosa. Aquí, se debe detectar la franja blanca de forma fiable y no se debe confundir con otros elementos, azules o también blancos, existentes en el airbag.
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
|
|
|
Karta :
|
APP N° 84
|
Diferenciación de color metálico o negro en rueda dentada Los modelos metálico o pintado de negro de una rueda dentada deben ser diferenciados. La distancia entre el sensor y la pieza debe ser de 160mm y en necesario un spot de 3mm para poder realizar la detección sobre la superficie adecuada.
Color differentiation between a black and an uncoated metal gear wheel
A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter.
|
|
|
Karta :
|
APP N° 83
|
Diferenciación de color de hilo en airbag Los diferentes tipos de hilo utilizados en airbags deben ser diferenciados a través de su color. Como condicionante, algunos de estos hilos pueden ser bicolor.
Differentiation of threads on an airbag textile
Different colored threads must be differentiated. At this, the treads can be also bicolored.
|
|
|
Karta :
|
APP N° 82
|
Detección de marca en junta de caucho Un marca amarilla realizada sobre una junta o borde de caucho ha de ser detectada.
Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
|
|
|
Karta :
|
APP N° 81
|
Control de la posición V-Belt La ubicación exacta de una cinta en la pole ha de ser comprobada durante el montaje.
V-belt position control
The lateral displacement of a V-belt in a V-belt pulley must be controlled, because it happens that the V-Belt lies not properly in the V-belt pulley.
|
|
|
Karta :
|
APP N° 80
|
Diferenciación por color de piezas para equipamiento interior En la Industria del automóvil existen diferentes piezas para el interior del vehículo (pueden ser de madera, plástico o metálicas) que deben ser diferenciadas. Se debe tener en cuenta que existen componentes muy brillantes y otros con gran poder de absorción de la luz.
Color differentiation of interior equipment
In the automotive industry different interior parts (wooden as well as plastic and metal elements) must be differentiated. Some wooden and plastic elements are very glossy whereas other components are diffuse.
|
|
|
Karta :
|
APP N° 79
|
Diferenciación de rodamientos de bolas Los rodamientos de bolas de un mismo tamaño pero diferente color han de ser diferenciados. En este caso pueden verse que los anillos interiores son dorados o plateados. La distancia de detección mínima permitida es de 160mm.
Differentiation of ball bearings
Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm.
|
|
|
Karta :
|
APP N° 78
|
Contaje de bolsas de papel Durante el proceso de fabricación de bolsas de papel ha de realizarse un contaje previo al empaquetado del producto. Existen condicionantes para la aplicación, por ejemplo, la distancia a la bolsa de papel puede variar por lo que es necesario garantizar el funcionamiento en un rango de 80mm.La velocidad varía desde 0 hasta 50000 bolsas/hora. Además, la distancia entre los bordes de las diferentes bolsas fluctua e incluso pueden encontrarse bolsas con agujeros superficiales. El detector utilizado debe ser capaz de trabajar bajo todos estos condicionantes.
Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.
|
|
|
Karta :
|
APP N° 77
|
Inspección del acabado superficial en borde de cinta abrasiva Los bordes de las láminas abrasivas (lijas) deben ser marcados (mediante desgastado) en una correcta medida. Para verificar que este proceso ha dado el resultado esperado en tanto en cantidad como en homogeneidad, se debe hacer un control sobre este borde.
Edge control of abrasive belts
The edges of abrasive belts must be grinded to a certain degree. Thus, the degree of grinding should be controlled.
|
|
|
Karta :
|
APP N° 76
|
Control de marcas fluorescentes en tapones de frascos en el sector farmacéutico En la Industria farmacéutica, para poder distinguir entre frascos originales e imitaciones, las tapas de los frascos originales son señaladas con una marca fluorescente. Esta marca se detecta durante el proceso de empaquetado del producto.
Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.
|
|
|
Karta :
|
APP N° 75
|
Detección de marcas de color para registro de lago y posición longitudinal en la industria de la impresión Para definir el área de impresión se utilizan de manera conjunta una serie de marcas de diferentes colores. Con ellas se define la posición lateral y longitudinal partiendo de una marca trapezoidal negra.
Color mark detection for side and longitudinal register control in the printing industry
In the web offset printing trapezoid like color marks will be used for the side register as well as the longitudinal register control. For each color a color mark is used, at which all color marks will be synchronized to the black color mark.
|
|
|
Karta :
|
APP N° 74
|
Medición de brillo (en línea) de films plásticos y placas laminadas En el proceso de producción de flims plásticos y también de placas laminadas se ha de controlar el brillo de la superficie.
Inline gloss measurement of plastic films and laminated plates
During the production of plastic films as well as of laminated plates the gloss factor should be measured.
|
|
|
Karta :
|
APP N° 73
|
Diferenciación de Color en paneles fotovoltaicos El color azul de los paneles fotovoltaicos puede ser diferente dependiendo del proceso de producción utilizado por una u otra o fábrica o incluso en dos líneas de la misma fábrica. Debido a ello, se requiere realizar un control del color de dichos paneles.
Color differentiation of solar photo cells
The blue color of solar photo cells can differ due to the production process from factory to factory and even from line to line in the same factory. Thus, the color of the solar photo cells should be controlled.
|
|
|
Karta :
|
APP N° 72
|
Detección de grosor de capa de polvo (fibra de carbono con refuerzo plástico) Tras finalizar el recubrimiento de una lámina con de fibra de carbono con refuerzo plástico, la calidad del acabado (grosor de la capa) ha de ser controlado.
Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
|
|
|
Karta :
|
APP N° 71
|
Posicionamiento de lámina de trasparente de plástico La posición de una lámina de plástico transparente ha de ser controlado en un rango de aproximadamente 50mm.
Optical transparent plastic foil position control
The position of an optical transparent plastic film should be controlled in a range of approximately 50mm.
|
|
|
Karta :
|
APP N° 70
|
Detección de marca grabada en una placa metálica La ubicación de una marca usada para posicionar en los ejes “x“ e “y“ debe ser correctamente detectada. Dicha marca se encuentra en este caso, grabada sobre la superficie de una placa metálica.
Detection of an engraving mark on a metal plate
An engraving mark which is used for positioning in x-, y- and roll-direction has to be detected.
|
|
|
Karta :
|
APP N° 69
|
Centrado de banda para borde de papel Para realizar un correcto centrado, se debe controlar la posición del borde de una pieza de papel. Se requiere en dicho proceso controlar una zona de 50mm. El sistema ofrece una salida analógica 0-10V proporcional a la posición en la que se encuentra el papel.
Paper edge position control
The position of the edge of a paper line must be controlled in a range of 50mm. The system should deliver an analogue signal (0V … +10V) which is proportional to the position of the edge of the paper.
|
|
|
Karta :
|
APP N° 68
|
Detección de marca fluorescende en periódicos En la fabricación de periódicos y otros folleros similares, debe realizarse la detección de los periódicos defectuosos para ser rechazados de manera automática en el proceso. Gracias a la marca fluorescente (raya) que se realiza sobre los periódicos con defectos de calidad podemos realizar esta detección.
Fluorescence stripe detection on newspapers
Newspapers with quality defects will be marked with a fluorescence stripe. These newspapers must be automatically detected and rejected from the normal product stream.
|
|
|
Karta :
|
APP N° 67
|
Control de brillo en indústria del mueble Tras realizar el pintado en el proceso de fabricación de puertas, el brillo en estas debe ser controlado para verificar que se encuentra en los niveles correctos.
Inline gloss control in the furniture industry
During the manufacturing process of doors just after the painting line the amount of color must be controlled.
|
|
|
Karta :
|
APP N° 66
|
Monitorización de color en la indústria del mueble En el proceso de fabricación de puertas, el color de estas debe ser correctamente controlado y monitorizado. El pintado de estas puertas se realiza por pulverización de pintura a través de las boquillas montadas sobre un Robot de pintura. Nada más acabar el pintado y antes de que la la pintura se seque el color debe ser controlado.
Color monitoring in the furniture industry
During the manufacturing process of doors the color must be controlled and monitored. At this the color will be sprayed with spray nozzles, which are mounted on a robot, onto the doors. Just after this process but before the drying process the color should be controlled.
|
|
|
Karta :
|
APP N° 65
|
Detección de una referencia - sello de marca de agua en papel de seguridad Se debe monitorizar la posición exacta de una marca de referencia (marca de agua).
Detection of a reference water mark on safety paper
The position of a reference water mark must be inline detected. During the printing process it is necessary to synchronize the consecutive registers to the reference water mark.
|
|
|
Karta :
|
APP N° 64
|
Diferenciación de color entre tubos con y sin recubrimiento La parte interior de un tubo debe ser inspeccionada para comprobar si ha sido tratada o no con un recubrimiento especial. La detección se consigue gracias a la diferencia de color que presenta el tubo con recubrimiento (amarillo brillante) del tubo sin recubrimiento (color plata).
Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
|
|
|
Karta :
|
APP N° 63
|
Detección ultra rápida de marcas holográficas en la industría de la impresión Una de las propiedades de las marcas holográficas es la peculiar reflexión de la luz que poseen. Para la gran mayoría de ellas, la luz que incide en un ángulo de 45º en la marca se refleja directamente de vuelta de manera visible. Tanto las marcas transparente como las metalizadas se comportan de la misma manera.
Super fast detection of holographic reference marks in the printing industry
One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils.
|
|
|
Karta :
|
APP N° 62
|
Control de color en láminas de vidrio tintados En el proceso de ensamblado de vidrios en las puertas laterales de diferentes vehículos es necesario realizar un correcto control del color. Solo es posible realizar el control desde un lado y además, no es posible el uso de reflectores.
Color control of tinted glass plates
During the assembling of cars the color of the glasses from the side door must be checked. It is only possible to control from one side and even an additional reflector cannot be used.
|
|
|
Karta :
|
APP N° 61
|
Diferenciación de color en láminas de vidrio coloreado En los diferentes procesos aplicados a las láminas de vidrio el tintado y color de estos debe ser controlado para su diferenciación.
Color differentiation of tinted and colored glass plates
During the subsequent processing of glass plates the different tinted and colored glasses must be controlled and discerned.
|
|
|
Karta :
|
APP N° 60
|
Diferenciación de color en líquidos fluorescentes y marcas Los sensores fluorescentes disponibles solo detectan la intensidad de la luz pero no el color. Por eso, este tipo de sensores tienen problemas para detectar objetos de fluorescencia muy débil u objetos a más de 80mm, además de esto son sensibles a la luz externa. Para este propósito se debe utilizar un sensor de color para colores fluorescentes.
Color differentiation of fluorescent liquids and marks
Available fluorescent sensors so far detect only the intensity of a fluorescent object but not the color. Furthermore these sensors have a problem to detect very weak fluorescent objects or fluorescent objects at a distance more than 80mm and additionally they are sensitive against ambient light. For the purpose of fluorescent color mark detection a color sensor for fluorescent colors should be used.
|
|
|
Karta :
|
APP N° 59
|
Control de posición de placa de vidrio transparente Las máquinas de tratamiento de vidrio deben ser informadas no solo de la distancia a la placa de vidrio sino también de la posición del borde de dicha placa. Sin embargo, la detección del borde transparente no es nada fácil, más aún, si no existe ninguna marca sobre él. La tasa de reflexión de la luz en una superficie de vidrio es de aproximadamente el 4% y con la reflexión en la segunda capa hasta un 8% de la luz puede ser reflejada.
Position measurement of a transparent glass plate
Glass handling machines must be informed not only about the distance of a glass plate but also about the edge position of a glass plate. However the detection of the edge of a transparent glass plate is not so easy, especially if there is nearly no phase on the edges. The direct reflection rate of visible light on a standard glass surface is normally approximately 4% and with the additional reflection of the second surface around 8% of the light will be reflected.
|
|
|
Karta :
|
APP N° 58
|
Medida de distancia en placas de vidrio transparente En el proceso de manipulación de placas de vidrio se debe controlar la distancia desde un punto a hasta la superficie del vidrio. Durante la fase de biselado, la placa se debe colocar de tal manera que los bordes entren simétricamente en el bloque abrasivo de la máquina de pulir, de lo contrario, las fases de ambos lados de la placa obtienen acabados diferentes. Debido a que la superficie del cristal no refleja practicamente ninguna luz difusa y solo lo hace con luz directa no se puede utilizar un sensor láser estándar.
Distance measurement on transparent glass plates
During the handling process of glass plates the distance of the glass surface must be controlled. As during the beveling process the glass plate must be positioned in a way that the glass edges can be feed symmetrically into the abrasive block of the grinding machine, otherwise the phases on both sides of the glass plate are different. Due to the fact, that the glass surface delivers nearly no diffuse reflected light but only direct reflected light, a standard laser displacement sensor cannot be used.
|
|
|
Karta :
|
APP N° 57
|
Detección de línea fluorescente en espuma de diferentes colores Una misma línea fluorescente debe ser detectada en varios tipos de espuma de diferentes colores.
Detection of a fluorescent line on different colored foamed materials
A fluorescent line must be detected on different colored foamed materials.
|
|
|
Karta :
|
APP N° 56
|
Medición de diferencia de altura en discos holográficos de encoder La altura de los discos hológráficos de un encoder debe ser controlada sin contacto con él.
Measurement of the height difference of holographic encoder disks
The height of holographic encoder disks must be controlled in a non contact way.
|
|
|
Karta :
|
APP N° 55
|
Control de color en una emulsión El color de la emulsión que debe ser controlada es normalmente blanco pero pueden darse situaciones en las que el color derive hacia una mezla con rojo o verde. Esta posible desviación ha de ser controlada.
Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
|
|
|
Karta :
|
APP N° 54
|
Control de fundente de soldadura durante su aplicación La soldadura selectiva combinada con la aplicación automática de fundente es cada vez más popular. Especialmente los fabricantes de placas PCB se benefician de esta nueva tecnología. Tan solo las áreas que van a ser soldadas se cubren con el material fundente. Para ello, una boquilla piezoelectrica se utiliza para generar pequeñas gotas de flujo con diámetro de décimas de milímetro. El ángulo de dispersión de las gotas de flujo es muy pqueño para asegurar que las gotas solo cubren el área programada. Por todo ello, tanto la dirección de las gotas como la cantidad deben ser controladas para asegurar un correcto proceso posterior.
Soldering flux control during the selective flux application
Selective soldering in combination with selective flux application becomes more and more popular. Especially manufacturers of mixed assembled PCB boards benefit from this new technology. Only the areas which will be soldered will be covered from the soldering flux. To achieve this, a piezo nozzle is used to generate small flux droplets with a diameter of a few tenth of a millimeter. At this the scattering angle is very small which make sure, that the droplets strike only the scheduled area. The amount as well as the direction of the droplets should be controlled.
|
|
|
Karta :
|
APP N° 53
|
Diferenciación de Color-Brillo en cuero y cuero sintético para interiores de vehículos Los diferentes materiales utilizados en la interiores de vehículos son, en ocasiones, muy similares. Para una correcta distinción de los diferentes productos se puede realizar una inspección de Color y Brillo.
Color-gloss differentiation of leather and leather imitations in the automotive interior field
In the automotive interior field the different materials looks sometimes very similar. For a proper differentiation of the different products color-gloss detection should be used.
|
|
|
Karta :
|
APP N° 52
|
Diferenciación entre diferentes tipos de cuero y cuero sintético para interiores de vehículos En algunas ocasiones es imposible realizar una diferenciación entre materiales con exactamente el mismo color y mismo factor de brillo. Otro tipo de sensor debe solucionar este problema. Como se aprecia en las fotos, pese a tener el mismo color y brillo, estos materiales tienen una estructura diferente.
Differentiation of leather and leather imitations in the automotive interior field
Sometimes a color differentiation between interior materials with exactly the same color and the same gloss factor is not possible, even with the best color sensor. Thus another sensor must close this gap. Indeed the different materials may have the same color and the same gloss, but a different structure as shown in the photos.
|
|
|
Karta :
|
APP N° 51
|
Control de borde en cintas abrasivas Los diferentes tipos de cintas abrasivas para lijado están equipadas con un borde que tiene que ser controlado. El borde puede estar presente en el lado de la lija con cinta abrasiva o en el lado trasero. Además, el borde puede ser más oscuro que la parte trasera, pero siempre es más brillante que la superficie de lijado. Sin embargo, hay una diferencia suficiente de contraste entre el borde y el lado posterior o el lado de lijado.
Control of margined abrasive belts
Different sanding belts are equipped with a margin and this margin has to be controlled. The margin can be present on the sanding side of the abrasive belt or on the rear side. Furthermore the margin can be darker than the rear side but mostly it is brighter than the sanding surface. Nevertheless there is a sufficient difference in contrast between the margin and the rear side or the sanding side.
|
|
|
Karta :
|
APP N° 50
|
Detección de presencia o ausencia de fundente Durante el proceso de ensamblado de las células fotovoltaicas se debe controlar la presencia o ausencia de fundente de soldadura en las bandas de conducción.
Color control of the presence or absence of the flux
During the assembling process of photovoltaic cells on a stringer machine the conduction band must be controlled in respect of the presence or absence of the soldering flux.
|
|
|
Karta :
|
APP N° 49
|
Control de excentricidad en el eje de un cepillo de dientes eléctrico Tanto la frecuencia como la amplitud de la excentricidad del eje de un cepillo de dientes eléctrico debe ser controlada.
Control of the eccentricity of the shaft of an electrical tooth brush
The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled.
|
|
|
Karta :
|
APP N° 48
|
Control de color de LED En un cepillo de dientes eléctrico se debe detectar el color del LED. Además de esto, deben ser controlados los tiempos de encendido ON/OFF.
LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
|
|
|
Karta :
|
APP N° 47
|
Detección de marcas fluorescentes en placas de madera En las láminas de madera los defectos son marcados con un marcador fluorescente. La marca fluorescente tiene normalmente una anchura aproximada de 15mm y puede estar a 20mm de otra, ambas deben ser detectadas por separado. Además, aunque la detección se realiza a una distancia de 200mm debe realizarse de manera correcta la detección de marcas de hasta 5mm de anchura.
Color detection of fluorescent marks on wood plates
On wooden plates defects will be marked with a fluorescent marker. The fluorescent mark has normally a width of about 15mm and it can happen, that two of this marks lie 20 mm away of each other, but must be detected as two separate marks. Furthermore the fluorescent marks should be detected at a distance of 200 mm to the object and even a mark with a width of 5mm should be detected.
|
|
|
Karta :
|
APP N° 46
|
Detección de marca de color en tubo de aluminio Una marca de color rojo es pulverizada en el tubo de aluminio para ser posteriormente detectada en el movimiento lineal que este realiza. Además también debe ser detectada la presencia de letras y figuras negras en dicho tubo.
Color mark detection on aluminum tubes
A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too.
|
|
|
Karta :
|
APP N° 45
|
Detección de marca de color en hilos de Acero La zona en que los extremos de 2 hilos de Acero se sueldan se marca con color azul o rojo. Durante su posterior procesado, esta marca debe ser detectada.
Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
|
|
|
Karta :
|
APP N° 44
|
Diferenciación de color en hilos de aluminio anodizado Tras el tratamiento de anodizado de hilos de aluminio (color azul, dorado, rojo o verde) se debe detectar este color para evitar que se se pueda utilizar el hilo de color equivocado.
Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
|
|
|
Karta :
|
APP N° 43
|
Control de color en hilos de Acero Galvanizado Para mantener la calidad en los hilos de Acero es necesario realizar un control de la uniformidad del color de estos tras el proceso de galvanización.
Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
|
|
|
Karta :
|
APP N° 42
|
Diferenciación de color en hebillas de cinturón de seguridad En las hebillas para los cinturones de seguridad los colores beige, gris y negro son los más habituales aunque existen diferentes tonalidades dentro de ellos.
Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
|
|
|
Karta :
|
APP N° 41
|
Diferenciación de color en elementos interiores de vehículos Durante el proceso de ensamblaje de los elementos de control en el panel de control, las puertas laterales o en el techo del automovil, se debe verificar el color de estos elementos. La laca o pintura utilizada para estos elementos ha de ser del mismo color que la carrocería. Esta comprobación se realiza incluso con colores muy brillantes.
Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
|
|
|
Karta :
|
APP N° 40
|
Diferenciación de color en piezas plásticas para la industria del automovil En la industria del automovil se utilizan gran cantidad de piezas de plástico incluso en el interior de los vehículos. Estos componentes se utilizan entre otras partes en los laterales de las puertas, asientos, la puerta del maletero, el reposacabezas y el salpicadero. Estas piezas suelen ser de color gris, beige o negro.
Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
|
|
|
Karta :
|
APP N° 39
|
Presencia de etiqueta en airbag mediante control de color Los avisos de advertencia del airbag se colocan en diferentes posiciones dentro de un vehículo. Estas etiquetas son fluorescentes de color verde. El fondo donde se colocan las etiquetas es también ligeramente fluorescente pero en color azul.
Color control of the presence of an airbag label
On different positions in a car there are placed airbag warning notices. These labels are fluorescent in the green color range. The background, where the labels are placed, however, is slightly fluorescent in the blue color range.
|
|
|
Karta :
|
APP N° 38
|
Detección de brillo en partes cuero natural y sintético para el sector del automovil Para los elementos interiores de los vehículos se utilizan en la industria piezas de cuero natural o sintético. Para evitar que una pieza incorrecta sea montada se realiza una comprobación previaa a través del brillo de la pieza.
Color gloss differentiation of leather and leather imitations in the automotive industry
In the automotive interior field components made of leather as well as of leather imitations are available. To avoid, that the wrong parts will be mounted a quality check with a color gloss sensor must be done.
|
|
|
Karta :
|
APP N° 37
|
Diferenciación de color en manetas para puertas de automóviles Al realizar el ensamblaje de las manetas de puertas en la propia puerta del vehículo debe comprobarse que el color de ambas piezas sea el mismo para evitar que una pieza incorrecta pase de la fase de montaje.
Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
|
|
|
Karta :
|
APP N° 36
|
Diferenciación de color en cueros y otros textiles para el interior de automoviles Existen diferentes tipos de textiles, entre ellos el cuero, muy utilizados especialmente para puertas, asientos y reposacabezas en vehículos que deben ser controladas para evitar errores durante el proceso de ensamblaje.
Color differentiation of leather imitations and textiles in the automotive interior field
Different leather imitations and textiles which are used especially for car doors, car seats and headliners must be controlled to avoid failures during the assembling.
|
|
|
Karta :
|
APP N° 35
|
Diferenciación de moqueta en el sector del automovil (para equipamiento interior) En el ensamblaje de moquetas para el equipamiento interior de vehículos, se debe controlar el color de estas. En la práctica los colores gris, beige y negro son los tonos más habituales.
Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
|
|
|
Karta :
|
APP N° 34
|
Diferenciación de color en pieza de cuero natural o sintético (para tapizados) El cuero y sus imitaciones se utilizan en los interiores de vehículos.
Color differentiation of leather and leather imitation (interior equipment)
Leather and leather imitations are used for the interior equipment in the automotive industry.
|
|
|
Karta :
|
APP N° 33
|
Determinación del número de capas de telas para Airbag Es necesario conocer el número de telas (capas) para Airbarg apiladas. La detección se realiza sobre un fondo que actúa de referencia.
Determination of the number of airbag webs
The number of airbag webs should be detected on a reference background.
|
|
|
Karta :
|
APP N° 32
|
Diferenciación entre caras con o sin recubrimiento en partes texiles de una airbag En la fabricación de airbags debe diferenciarse la cara con o sin recubrimiento. Existe solo una pequeña diferencia en el color y brillo entre estas caras pertenecientes a la parte textil del airbag.
Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
|
|
|
Karta :
|
APP N° 31
|
Diferenciación de color en piezas plásticas para interiores de automóviles Los diferentes componentes utilizados en las partes interiores de los automóviles deben ser diferenciadas dependiendo de su color.
Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
|
|
|
Karta :
|
APP N° 30
|
Control de color de pintado en automoción En la industria del automóvil, se deben controlar los componentes pintados para evitar errores en el suministro de pedidos para fabricantes de coches. Piezas como parachoques, carcasas para espejos retrovisores, sensores ultrasónicos, tapas para el depósito de combustible, manetas de puertas, puertas o tapas frontales están pintadas con lacas brillantes que deben ser iguales al color base.
Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
|
|
|
Karta :
|
APP N° 29
|
Medición de longitud de tubos metálicos en el proceso de fabricación La longitud de los tubos metálicos debe ser controlada durante su fabricación debido al proceso de corte previo realizado sobre estos tubos. La precisón en la medida debe estar en el rango de la décima de milímetro.
Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.
|
|
|
Karta :
|
APP N° 28
|
Detección de pegamento fluorescente en bolsas de papel En el proceso de fabricación de bolsas de papel se utiliza un pegamento fluorescente para cerrar las bolsas en el lado inferior. A veces y por diferentes razones (defectos en la matriz de impresión, pegamento seco o ausencia de pegamento) no se aplica el pegamento en la bolsa lo que provoca que la bolsa no sea apta para continuar con el proceso.
Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.
|
|
|
Karta :
|
APP N° 27
|
Detección de marcas de color (marcas de registro) Durante el proceso de pintado de láminas de plástico en la industria alimentaria el color de las marcas debe ser correctamente detectado en cada producto pintado.
Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.
|
|
|
Karta :
|
APP N° 26
|
Detección de separaciones y grabados en los inducidos de motores eléctricos. Se deben detectar las separaciones y grabados en los motores eléctricos. La velocidad máxima es de 2500 U / min.
Groove and gap detection on wire-wound armature
The gaps as well as the milled grooves on wire-wound armatures should be detected during the electronic balancing process. The maximum speed is around 2500 revolutions per minute.
|
|
|
Karta :
|
APP N° 25
|
Detección de marcas de color en pañales Diferentes marcas (con diferentes colores) deben ser detectadas con un sensor integrado en la línea. La máxima velocidad de producción es de 10m/s.
Detection of color marks on disposal diapers
Different color marks (different in color) should be detected with an inline sensor. The maximum production speed is 10 m/s.
|
|
|
Karta :
|
APP N° 24
|
Control de color e intensidad de marcas fluorescentes en el proceso de producción La intensidad de marcas fluorescentes impresas debe ser controlada para verificar su calidad. Existe la posiblidad de encontrar marcas con diferentes densidades. Por lo tanto, tanto el color como la intensidad de estas marcas fluorescentes ha de poder controlarse.
Color and intensity control of fluorescent color marks during the production
The intensity of a printed fluorescent color should be controlled. At this, fluorescent color marks with different densities of color are present. Thus, the color as well as the intensity of the fluorescent color mark can be controlled.
|
|
|
Karta :
|
APP N° 23
|
Control de líquido de color Durante los procesos con agua, la calidad de esta debe ser controlada. Puede ocurrir que el color del agua se vuelva ligeramente azul (contaminada) o beige (aceitosa). En ambos casos esto debe ser detectado ya que el agua debe estar limpia en todo el proceso.
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
|
|
|
Karta :
|
APP N° 22
|
Diferencias de color en botellas de vidrio coloreado En la industria del reciclaje de vidrio es necesario separar las botellas según su color para poder ordernarlas correctamente según su material.
Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.
|
|
APP N° 21
|
Grabación y monitorización de color Cada vez más usuarios de los sensores de color SPECTRO-3 consultan sobre la posibilidad de un software que permita la monitorización y grabación de color. Los fabricantes de materiales como láminas de plástico (ej. muebles, papel o industria del automovil) y los fabricantes de productos madereros como MDF necesitan un sistema en línea no solo para comprobar la calidad en el 100% de las piezas sino para grabar la señal de color permitiendo incluirla junto al número de producto, nombre del cliente, número de pedido, nombre del operador, fecha y hora. Además, se requiere que este sistema informe al operador acerca de la tendencia del color para iniciar las posibles contramedidas que se requiera tomar frente a una desviación del color correcto.
Color signal recording and color signal monitoring
More and more users of the SPECTRO-3 color sensors are asking for a color monitoring and color recording software. The manufacturers of endless materials like plastic foils (e.g. furniture, paper and automotive industry) and the fabricators of laminated medium density fiberboards (MDF) needs an inline sensor system not only for a 100% - quality control but beyond that a system for color signal recording, which allows also to document data like product number, customer name or number, order number, operator name, time and date. Furthermore, the sensor system should inform the operator about the color trend of the product, thus possible countermeasures can be duly initiated.
|
|
|
Karta :
|
APP N° 20
|
Control de color en tapa Los colores de diferentes tapas de plástico debe ser controlado.
Closure head color control
Different plastic closure heads should be color controlled.
|
|
|
Karta :
|
APP N° 19
|
Control de marca de tinta negra en tubos metálicos En los tubos metálicos, las marcas son aplicadas son impresoras de chorro de tinta. A veces la posición de esta marca no es correcta o la cantidad de tinta no es la suficiente.
Black ink mark control on metal tubes
On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient.
|
|
|
Karta :
|
APP N° 18
|
Control de la posición lateral en cintras transportadoras para industria papelera y maderera En la Industria madera (durante la producción por ejemplo de MDF= tablero de fibra de densidad media) así como en la en la industria papelera, se utilizan cintras transportadores especiales.
La posición lateral de la cinta se debe mantener dentro de un rango de ± 0,2 mm mientras la posición vertical puede cambiar en el intervalo de ± 2 mm. El material de la cinta trasportadora es Acero Inoxidable o plástico tejido.
Lateral position control of conveyor belts in the wood and paper industry
In the wood industry (during the production e.g. of MDFs = medium density fiberboards) as well as in the paper industry, special conveyor belts are in use. The lateral position of the band material must be hold in a range of ±0.2mm, whereas the vertical position can change in the range of ±2mm. The material of the conveyor belt is either stainless steel or plastic fabric.
|
|
|
Karta :
|
APP N° 17
|
Detección de botellas de vidrio trasparentes o con acabado lechoso En la industria del vidrio, durante el proceso de fabricación de botellas para el sector farmacéutico, las botellas deben ser recubiertas internamente con un producto que les otorga un acabado lechoso. Debido a ello, podemos detectar cuando estas botellas están o no recubiertas.
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
|
|
|
Karta :
|
APP N° 16
|
Detección de zonas con brillo en placas de vidrio con acabado mate Durante la producción de placas de vidrio mate la superficie debe ser controlada para detectar posibles zonas brillantes. El tamaño de la parte brillante más pequeña que puede ser detectada tiene un diámetro mínimo de aproximadamente 3mm.
Detection of glossy regions on a matt-finished glass plate
During the production of matt-finished glass plates the matt-finished surface must be controlled particularly with regard to small glossy spot. The glossy domains which should be detected are starting with a diameter of approximately 3 mm.
|
|
|
Karta :
|
APP N° 15
|
Detección de tiras de colores iridiscentes en papeles de seguridad La posición y la cantidad de las tiras multicolores iridiscentes en papel de seguridad debe ser controlada para verificar su calidad.
Detection of pearlescent color strips on security papers
The position as well as the quality of pearlescent multi color strips on security paper should be controlled.
|
|
|
Karta :
|
APP N° 14
|
Control de altura de etiqueta cubierta con plástico trasparente La altura de etiquetas con una cubierta de plástico transparente debe ser medida con una precisión de 0,1mm.
Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.
|
|
|
Karta :
|
APP N° 13
|
Control de la superficie de un vástafo de pistón: superficie de Acero o Cromado El vástago de un pistón debe ser controlado para verificar si su superficie está o no correctamente cromado.
Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
|
|
|
Karta :
|
APP N° 12
|
Detección de dos hilos diferentes hilos para interiores de un vehículo La tarea consiste en distinguir correctamente 2 hilos de diferentes colores (beige y gris).
Detection of two different colored threads on interior parts
The task is to distinguish properly between the two different colored threads (beige and gray).
|
|
|
Karta :
|
APP N° 11
|
Detección del borde de una etiqueta blanca en un pañal del mismo color En el ensamblaje del pañal, la presencia y la posición de una etiqueta blanca ha de ser controlada.
Inline edge detection of a white label on a white diaper
During the assembly of diapers, the presence as well as the position of the label must be controlled.
|
|
|
Karta :
|
APP N° 10
|
Control del color de la costura en 2 tipos de cuero sintético La tarea consiste en detectar la presencia o ausencia de la costura piezas de cuero sintético. Hay 2 colores diferentes de pieza, beige y gris, así como las mismas tonalidades para el hilo de la costura.
Color control of two different seams on two different leather imitations
The task is to detect, whether the seam is present on the leather imitation or not. There are two different colored leather imitations, beige and gray and respectively a beige thread as well as a gray thread.
|
|
|
Karta :
|
APP N° 9
|
Detección de la línea de soldadura en una barra metálica El cordón de soldadura debe ser detectado durante rotación de la barra metálica. Hay que tener en cuenta que en dicha barra hay arañazos y óxido en la superficie que dificultan la detección.
Detection of a welding line on a metal rod
The welding line must be detected during the rotation of a metal rod. It has to be taken into account, that there are scratches as well as rust on the metal surface.
|
|
|
Karta :
|
APP N° 8
|
Control de color de cabeza de sensor ultrasónico durante su integración en la industria del automovil Es necesario controlar el color de la cabeza de los detectores ultrasónicos ubicados en el paragolpes durante el proceso de ensamblado.
Color control of ultrasonic sensor caps in the automotive industry during the integration process
During the assembling of the ultrasonic sensors into the bumpers the color of the ultrasonic sensor caps must be controlled.
|
|
|
Karta :
|
APP N° 7
|
Diferenciación de láminas metálicas con y sin recubrimiento con un sensor de color En el proceso de producción de tapas metálica para envases y latas, la posición de la lámina (frontal/trasera) ha de ser comprobada. Para ello es necesario distinguir entra la parte que ha sido recubierta y la que no.
Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
|
|
|
Karta :
|
APP N° 6
|
Detección de punto de unión por cambio de superficie El material base para circuitos impresos se coloca normalmente en una bobina “sinfin” dónde debe detectarse, mediante el cambio de superficie, el punto de unión de 2 tramos de este material.
Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.
|
|
|
Karta :
|
APP N° 5
|
Control de chapa en la fabricación de puertas 1. Detección de zonas quemadas o arracandas en el corte en la fabricación de puertas:
Las láminas de madera deben ser pegadas con adhesivo a una plancha de mdf. Este proceso puede verse interrumpido por diferentes razones y provocar que la pistola de aire caliente, utilizada para calentar el pegamento, queme ligeramente la superficie de la lámina. Además, un sensor de color puede detectar arrancamientos producidos por la herramienta de corte.
2. Diferenciación entre láminas blancas con acabado brillante o mate:
La tarea consiste en distinguir entre dos láminas blancas, una brillante y otra mate.
Veneer control during the door production
1. Detection of slightly burned veneer zones and veneer tear-off during the door production:
The veneer will be glued onto the mdf plate during the movement, however, if the process will be interrupted due to any reason, it can happen, that the hot air gun, which will be used normally to warm up the glue, scorches or burns the veneer surface slightly. Furthermore the color sensor should detect a veneer tear-off.
2. Differentiation between white glossy veneer and white matt veneer:
The task is to distinguish between white glossy and white matt veneer.
|
|
|
Karta :
|
APP N° 4
|
Detección de la presencia de lana durante la fabricación de pañales desechables En la producción de pañales desechables se necesita confirmar la presencia de la lana que el pañal debe llevar. La velocidad de producción puede llegar hasta aproximadamente 10m/s y la altura del pañal puede cambiar ligeramente. Además, tanto el pañal como la lana son blancos pero tienen un componente que los convierte en Azul bajo la influencia de Luz UV.
Detection of the presence of the fleece during the production of disposable diapers
During the production of disposable diapers the assembling of the fleece must be checked. The production speed is approximately up to 10m/s and the height of the diapers can slightly changing. Furthermore the color of the diaper as well as the color of the fleece is white but additionally to this the fleece is fluorescent in blue under the influence of UV light.
|
|
|
Karta :
|
APP N° 3
|
Detección de dirección correcta en cinta adhesiva (cara delantera/trasera) La posición de una cinta adhesiva debe ser controlada para diferenciar la parte delantera de la trasera. El color de la banda puede ser blanco, negro o rojo.
Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
|
|
|
Karta :
|
APP N° 2
|
Control de la dirección del ”Hook-and-pile” (Velcro®) La tarea consiste en comprobar la dirección de “Hook-and-pile” tras el ensamblado.
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
|
|
|
Karta :
|
APP N° 1
|
Control de calidad durante el proceso de fabricación de airbags en la industria del automóvil 1. Control de la superficie textil del airbarg con/sin recubrimiento:
Una de las caras del airbag posee un recubrimiento que la otra cara no posee. La tarea consiste en comprobar si la parte superior tiene este recubrimiento.
2. Comprobar la presencia de un lámina plástica entre dos capas del airbag:
La presencia de la entretela formada por una lámina de plástico se comprueba a través de un corte en la superficie del airbag.
Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.
|
|