SPECTRO-2-CONLAS
Two-channel evaluation system
General technical data ....
| Type | Transmitter (light source) | Receiver | Object distance | LxWxH (mm) | For use with | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|---|---|
| SPECTRO-2-CONLAS | via two external sensor frontends: Laser (A-LAS-N-...-C or infrared (FK-...-LAS-IR) | via two external sensor frontends | depends on the sensor front-end used | 110x65x28 | A-LAS-N-...-C, FK-...-LAS-IR |
|
|
|
GENERAL TECHNICAL DATA:
| Software | Windows® PC software: SPECTRO2-Scope |
| Voltage supply | +24VDC (± 10%), reversed-polarity protected, overload protected |
| Current consumption | <160mA |
| Max. switching current | 100mA, short-circuit proof |
| Switching state indication | 2 yellow LEDs (OUT0 and OUT1) |
| Inputs digital (2x) | IN0 and IN1 (0V/+24V) |
| Outputs digital (2x) | OUT0 and OUT1 (0V/+24V) |
| Output analog (1x) | Voltage 0...+10V or current 4...20mA |
| Interface | RS232 (USB- and Ethernet adapter available) |
| Pulse lengthening | 0...100ms, adjustable via PC software |
| Averaging | max. 32768 values, adjustable via PC software |
| Scan frequency | LED operation, switchable via PC software: - AC operation: max. 50kHz - DC operation: max. 130kHz |
| Switching frequqnecy | typ. 60kH |
| Analog band width | typ. 90kHz (-3dB) |
| Transmitter (light source) | depends on the frontend used |
| Transmitter control | switchable via PC software: AC operation (LED MODE-AC), DC operation (LED MODE-DC) |
| Object distance (measuring range) |
depends on the frontend used |
| Receiver | depends on the frontend used |
| Gain | Receiver gain setting: 8 steps (AMP1...AMP8), adjustable via PC software |
| Ambient light | max. 5000 Lux |
| Size of light spot | depends on the frontend used |
| Reproducibility | 2 digits at 12-Bit-A/D conversion (corresponds to 1/2048) |
| Housing dimensions | depends on the frontend used |
| Housing material | Aluminum, anodized in black |
| Type of connector | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 - to the frontends: 4x 7-pole fem. connector Binder 712 |
| Connecting cable | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
| Operating temp. range | -20°C ... +55°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | IP64 |
| EMC test acc. to | DIN EN 60947-5-2 |
TOP