N° 317
|
Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
|
|
N° 221
|
Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
|
|
N° 218
|
Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
|
|
N° 200
|
Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
|
|
N° 176
|
Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
|
|
N° 129
|
Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
|
|
N° 85
|
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
|
|
N° 82
|
Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
|
|
N° 72
|
Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
|
|
N° 48
|
Led lámpák ellenőrzése Az elektromos fogkefe LED lámpáinak színét ellenőrizni kell, továbbá a ki/be-kapcsolt állapotban töltött időt is meg kell határozni.
LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
|
|
N° 42
|
A biztonsági övekhez használt csatok színének megkülönböztetése A biztonsági övekhez használt csatok túlnyomórészt bézs, szürke, vagy fekete színűek, de különböző színű árnyalatok is használatosak.
Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
|
|
N° 41
|
Kapcsolók színének megkülönböztetése az autóiparban Az összeállítási folyamat során a műszerfalba, az oldalajtókba, vagy a napfénytetőbe szerelhető kapcsolók színét ellenőrizni kell. A kapcsolók burkolatára többnyire a karosszériával megegyező színű lakkozás kerül, ami nagyon fényes színeket eredményez az ellenőrzés során.
Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
|
|
N° 40
|
Az autóiparban használt műanyag alkatrészek színének megkülönböztetése Az autóiparban számos műanyag belső alkatrész kerül felhasználásra. Ezen alkatrészek többek között az oldalajtókban, ülésekben, hátsó ajtókban, napfénytetőkben és műszerfalakban használatosak. Ezek a műanyag alkatrészek többnyire szürke, bézs, vagy fekete színűek.
Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
|
|
N° 31
|
Az autóipari műanyag belső alkatrészek színeinek megkülönböztetése Az autóiparban használatos, eltérő színű műanyag belső alkatrészeket meg kell különböztetni.
Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
|
|
N° 23
|
Színes folyadék ellenőrzése A víz felhasználása során a vízminőséget ellenőrizni kell. Előfordulhat, hogy a víz kissé kék (szennyezett), vagy bézs (olajos) színű lesz. Mindkét esetet fel kell ismerni, a víznek tisztának kell lennie.
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
|
|
N° 22
|
A színes üvegpalackok színének megkülönböztetése Az üvegújrahasznosító iparban szükséges az eltérő színű palackok megkülönböztetése az anyagok helyes válogatása céljából.
Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.
|
|
N° 17
|
A tiszta és bevonatos üvegpalackok ellenőrzése Az üveggyártó iparban, az üvegpalackok feldolgozása során az üvegeket belülről be kell vonni a gyógyszeriparban való felhasználáshoz. A feladat az üveg bevonatának ellenőrzése.
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
|
|
N° 2
|
A tépőzárak irányának ellenőrzése A feladat a tépőzárak irányának ellenőrzése.
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
|
|