Praktische Beispiele aus dem industriellen Einsatz
1) Einsatzbereich auswählen:
Chemical Industry (Chemische Industrie)
2) Sprache auswählen:
APP N° 794
|
Presence control of a very thin oil layer The presence of a very thin oil layer (< 1µm) should be controlled. |
|
|||||
APP N° 711
|
Color checking of the paintwork through sight glasses The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface. |
|
|||||
APP N° 673
|
Spray jet control with a laser through beam system The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled. |
|
|||||
APP N° 626
|
Intensity control of fluorescent additives in oil-soaked paper The intensity of fluorescent additives in oil-soaked paper should be controlled. |
|
|||||
APP N° 598
|
Color control of flames The color of a flame should be controlled. |
|
|||||
APP N° 517
|
溶液中的钝化剂浓度检测 应检测溶液中的钝化剂的含量。 Concentration control of a passivator in a solvent The amount of a passivator in a solvent should be controlled. |
|
|||||
APP N° 459
|
区分一个塑料环的正面和反面 应检查要用输送带输送的塑料环的位置 (正面上 - 下)。 Plastic ring bottom side – upper side differentiation Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side). |
|
|||||
APP N° 458
|
识别塑料绒带上的分界点 应在一条塑料绒带上检测分界点。在此应注意，分界点和塑料绒的材质都是白色的，因此没有颜色区别。 Cut off point detection on a fleece tape The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference. |
|
|||||
APP N° 457
|
识别透明塑料带上的硅胶层的位置 应在一张透明的塑料膜上检测出硅胶层的位置 (识别硅胶带的正面和反面)。 Position detection of a silicon layer on a transparent plastic film The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation). |
|
|||||
APP N° 213
|
检测液体表面的泡沫 此应用中,SI用于检测液体表面是否有泡沫，同时带泡沫的液位高度也需要被检测。 Detection of the presence of foam on a liquid The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously. |
|
|||||
APP N° 195
|
荧光油的颜色分辨 该应用中，需要区分不同类型的引擎用油。矿物油本身有荧光特性，检测过程中还会在油中加入荧光液体以使传感器能够通过颜色来区分不同类型的油。 Color differentiation of fluorescent oil Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types. |
|
|||||
APP N° 126
|
油漆颜色控制 此应用用于对油漆的颜色进行在线监控，以确定再向油漆里加入哪种颜色。 Color control of lacquers The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer. |
|
|||||
APP N° 111
|
用激光光幕检测滴剂 用SI激光光幕可对滴剂的下滴数量及下滴体积进行检测。 Drop control with a laser through beam system The number as well as the volume of drops should be controlled. |
|
|||||
APP N° 55
|
乳化液体的颜色控制 乳化液体的颜色通常是白色，但有时该白色液体也可能会偏红或者偏绿，SI颜色传感器可以有效的检测到这种偏差。 Color control of an emulsion The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled. |
|
|||||
APP N° 23
|
检测有色液体 在水循环过程中需要对水的颜色进行检测。水有可能呈现蓝色（污染）或米色（含油），颜色传感器需检测到这两种情况，保证水质清澈。 Colored liquid control During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean. |
|
TOP