GLAST Series
Gloss and structure sensors
General technical data ....
| Type | Light source | Angle of incidence | Measuring distance (recommended) | Detection range | LxWxH (mm) | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|---|---|
| GLAST-85-30°/30°-DIF-... | 16 super bright white light LED, diffusor and line grid (available line grid types: -0.5/0.5 -1.0/1.0 -2.0/2.0) | Optical axes of lighting units are inclined each at an angle of 30° from the normal (vertical) | typ. 85mm ± 5mm | Measuring length typ. 20mm at distance 85mm | 171.1x87.76x34 |
|
|
|
|
|
| GLAST-85-45°/45°-DIF-... | 16 super bright white light LED, diffusor and line grid (available line grid types: -0.5/0.5 -1.0/1.0 -2.0/2.0) | Optical axes of lighting units are inclined each at an angle of 45° from the normal (vertical) | typ. 85mm ± 5mm | Measuring length typ. 20mm at distance 85mm | 204.3x110.31x34 |
|
|
|
|
|
| GLAST-135-0°-... | 16 super bright white light LED, diffusor and line grid (available line grid types: -0.5/0.5 -1.0/1.0 -2.0/2.0) | Split version: Transmitter and receiver in separate housings, arranged opposite (0°), including mounting angle | 135mm | Measuring length typ. 20mm at distance 135mm | T/R: each 135x55x34 Gesamt (incl. mounting angle): 600x323x34 |
|
GENERAL TECHNICAL DATA:
| Software | Windows® PC software: STRUCT-Scope |
| Voltage supply | +24VDC (± 10%), reversed polarity protected, overload protected |
| Current consumption | <500mA |
| Max. switching current | 100mA, short-circuit proof |
| Switching state indication | 5 yellow LED (OUT0 ... OUT4) |
| Input digital | 1x digital input: IN0 (0V/+24V) |
| Output digital | 5x digital output: OUT0 ... OUT4 (0V/+24V) |
| Interface | RS232 (USB and Ethernet adaptor available) |
| Pulse lengthening | 100ms ... 1s, adjustable via PC software |
| Averaging | max. 32 values, adjustable via PC software |
| Line grid | Various line grid types are available: 0.5/0.5: 0.5mm line width and 0.5mm spacing 1.0/1.0: 1mm line width and 1mm spacing 2.0/2.0: 2mm line width and 2mm spacing |
| Max. measuring frequency | typ. 10Hz |
| Angle of incidence | depends on sensor type |
| Transmitter (light source) | depends on sensor type |
| Transmitter control | can be switched via PC software: Alternatinv light operation (LED MODE-AC), Direct light operation (LED MODE-DC) |
| Measuring distance | depends on sensor type |
| Receiver | Line detector (512 pixel), projection objective, apertured diaphragm 1mm |
| Exposure time | Exposure time adjustable via PC software (EXPOSURE TIME) |
| Detection range | depends on sensor type |
| Temperature drift X,Y | deltaX/deltaT, deltaY/deltaT: typ. 0.2 digits/°C (< 0.01%/°C) |
| Resolution | 20mm/4096 |
| Memory capacity | max. 5 spatial frequency spectra (max. 31 structures) |
| Housing dimensions | depends on sensor type |
| Housing material | Aluminum, anodized in black (optics holding device: anodized) |
| Type of connector | - to PLC: 8-pole fem. connector Binder 712 - to PC: 4-pole fem. connector Binder 707 |
| Connecting cables | - to PLC: cab-las8/SPS - to PC: cab-las4/PC, cab-4/USB or cab-4/ETH |
| Operating temp. range | -20°C ... +55°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | IP64 |
| EMC test acc. to | DIN EN 60947-5-2 |
TOP