SLB Series Split Light Barriers (IR)
Trigger Light Barriers (Split Version)General technical data ....
GENERAL TECHNICAL DATA:
Designs and variants | Split IR light barrier (transmitter and receiver each in separate housings), available ► in different designs ► with various connection possibilities (cf. connection type): without connector (i.e. open cable ends), type -P, type -TP or -TPN, type -TPO ► in different cable lengths (500mm or 1000mm) |
Suitable amplifiers or electronic control units |
depends on sensor type |
Design | depends on sensor type |
Light source (transmitter) | IR-LED, 905nm, DC operation: max. optical power <0.4mW, AC operation: average optical power <0.4mW |
Light exit at transmitter | depends on sensor type |
Max. detecting range | depends on sensor type |
Min. detectable object | depends on sensor type |
Reproducibility | depends on sensor type |
Optical filter | Day light block filter |
Optics | collimated, beam divergency typ. 100mrad |
Operating mode | Direct light (DC) or alternating light (AC), depends on amplifier or electronic control unit used |
Ambient light | up to 5000 Lux (in case of AC operation) |
Housing material | Aluminum, anodized in blue |
Housing dimensions | depends on sensor type |
Connection type (Kabel oder Stecker) |
►in case of type without connector (without -P, -TP, -TPN, -TPO): integrated cable without connector (open cable ends, here: direct mounting to the amplifier is necessary) ►in case of type -P: integrated cable with 8-pole connector Binder series 712 ►in case of type -TP or -TPN: integrated cable with tool plug connector incl. 8-pole connector Binder series 712 ►in case of type -TPO: integrated cable with tool plug connector incl. 5-pole connector Binder series 680 |
Anschlusskabel | ►in case of type without connector: Direct connection to the amplifier (concurrent order of amplifier!) ►in case of type -P: No connecting cable is necessary (connection to amplifier via 8-pole connector) ►in case of type -TP or -TPN: Connecting cable cab-tlb8/702 ►in case of type -TPO: Connecting cable SI-KAB2 |
Operating temp. range | -20°C ... +80°C |
Storage temp. range | -20°C ... +80°C |
Enclosure rating | IP67 |
EMC test acc. to | DIN EN 60947-5-2 |