FIA Series
Fork light barriers with integrated amplifier
General technical data ....
| Type | Fork sizes (width/ depth mm) | Light source | Aperture sizes (mm) | Min. detect. object | Repro- duci- bility | Switch. fre- quency | Inputs/ out- puts | LxWxH (mm) | Data sheet |
CAD data |
Appl. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FIA-A-H-... | 10/10... 20/30 cable version 4-wire | IR (LED 905nm) | Ø0.4...Ø2.0 or 0.2x0.5...1x2 | 0.05mm | 0.2% of meas. range | 100kHz | I-CTRL, ANA | 40x30x8.5 ... 60x40x8.5 |
|
|
|||
| FIA-A-V-... | 10/10... 20/30 cable version 4-wire | IR (LED 905nm) | Ø0.4...Ø2.0 or 0.2x0.5...1x2 | 0.05mm | 0.2% of meas. range | 100kHz | I-CTRL, ANA | 40x30x8.5 ... 60x40x8.5 |
|
|
|||
| FIA-C-06-... | 5/10... 20/30 cable version 4-wire | IR (LED 905nm) | Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 1kHz | 2x DIG (Q,Qinv) | 33.5x19x6 ... 53.5x34x6 |
|
|
|||
| FIA-C-06-...-5/8-IR-... | 5/8 cable version 4-wire | IR (LED 905nm) | Ø0.6 | 0.3mm | 0.05mm | 1kHz | 2x DIG (Q,Qinv) | 31.5x25x6 |
|
||||
| FIA-C-08-... | 10/15... 40/30 cable version 4-wire | IR (LED 905nm) | IR: Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 10kHz | 2x DIG (Q,Qinv) | 28x29x8 ... 43x59x8 |
|
|
|||
| FIA-C-08-...-3pol-... | 10/15... 30/30 cable version 3-wire | IR (LED 905nm) | IR: Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 1kHz | 1xDIG (N, NI, P, PI) | 28x29x8 ... 43x59x8 |
|
||||
| FIA-F-... | 10/15... 50/30 plug version 4-pole M8 | IR (LED 905nm) | Ø0.6...Ø1.5 | 0.01mm | 0.005mm | 500kHz | 2x DIG (Q,Qinv) | 64.5x30x10 ... 79.5x30x10 |
|
|
|||
| FIA-P-06-... | 5/10... 10/15 plug version 4-pole M8 | IR (LED 905nm) | IR: Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 1kHz | 2x DIG (Q,Qinv) | 31.5x19x6 ... 36.5x24x6 |
|
|
|||
| FIA-P-06-...-5/8-IR | 5/8 plug version 4-pole M8 | IR (LED 905nm) | Ø0.6 | 0.3mm | 0.05mm | 1kHz | 2x DIG (Q,Qinv) | 31.5x25x6 |
|
||||
| FIA-P-08-... | 10/15... 40/30 plug version 4-pole M8 | IR (LED 905nm) | IR: Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 10kHz | 2xDIG (Q, Qinv) | 28x29x8 ... 43x59x8 |
|
|
|||
| FIA-P-08-...-3pol | 10/15... 40/30 plug version 3-pole M8 | IR (LED 905nm) | IR: Ø0.4...Ø1.2 | 0.3mm | 0.05mm | 1kHz | 1xDIG (N, NI, P, PI) | 28x29x8 ... 43x59x8 |
|
||||
| FIA-P-15-...-5/5-IR | 5/5 plug version 4-pole M8 | IR (LED 905nm) | Ø0.4 or Ø0.6 | 0.3mm | 0.01mm | 1kHz | 2xDIG (Q, Qinv) | 25x25x15 |
|
||||
| FIA-S-... | 10/15... 30/40 plug version 3-pole M8 | IR (LED 905nm) | Ø0.6...Ø1.5 | 0.4... 0.7mm (dep. on fork width) | 0.01mm | 5kHz | 1x DIG (Q or Qinv) | 31.5x29x8 ... 56.5x49x8 |
|
|
|||
| FIA-S-...-TypA | 10/15... 30/40 plug version 3-pole M8 (rotated 180°) | IR (LED 905nm) | Ø0.6...Ø1.5 | 0.4... 0.7mm (dep. on fork width) | 0.01mm | 5kHz | 1x DIG (Q or Qinv) | 31.5x29x8 ... 56.5x49x8 |
|
|
|||
| FIA-DUO-... | 20/30 25/60 25/80 plug version 4-pole M8 | IR (LED 850nm) | Ø1.0 | 20/30: 0.5mm 25/60: 0.6mm 25/80: 0.6mm | 0.3mm | 5kHz | 2x DIG (Q,Qinv) | 20/30: 65x39x8 25/60: 95x44x8 25/80: 115x44x8 |
|
|
|||
| FIA-LBL-C-... | 2/40 5/40 cable version 4-wire | IR (LED 905nm) | Ø1.2 | 0.3mm | 0.01mm | 5kHz | 2x DIG (Q, Qinv) | 60x32.5x12 or 60x35.5x12 |
|
||||
| FIA-LBL-P-... | 2/40 5/40 plug version 4-pole M12 | IR (LED 905nm) | Ø1.2 | 0.3mm | 0.01mm | 5kHz | 2x DIG (Q, Qinv) | 60x32.5x12 oder 60x35.5x12 |
|
||||
| FIA-F-CON1 + FIA-FE-... | 33/35 cable version 5-wire | IR (LED 905nm) | Ø0.4...Ø1.5 | 0.01mm | 0.005mm | 300kHz | 2x DIG (Q, Qinv) | CON1: 50x37.5x10 FE: 51x53x8.5 |
|
GENERAL TECHNICAL DATA:
| Voltage supply | +24VDC (± 10%), reversed polarity protected bei FIA-A-H, FIA-A-V: 5VDC, reversed polarity protected |
| Current consumption | FIA-A-H, FIA-A-V, FIA-C-06, FIA-C-08, FIA-P-06, FIA-P-08, FIA-P-15: <30mA FIA-F, FIA-S, FIA-DUO, FIA-LBL: < 80mA FIA-F-CON1 + FIA-FE-...-33/35: <130mA |
| Max. switching current | 100mA, short-circuit proof (not with FIA-A-H, FIA-A-V, FIA-F-CON1) |
| Band width analog signal | with FIA-A-H, FIA-A-V: 100 kHz (-3dB) |
| Fork sizes | depends on sensor type |
| Light source (transmitter) | depends on sensor type |
| Size of aperture | depends on sensor type |
| Min. detectable object | depends on sensor type |
| Reproducibility | depends on sensor type |
| Optical filter | depends on sensor type |
| Ambient light | up to 5000 Lux |
| Input | with FIA-A-H, FIA-A-V: I-CONTROL |
| Outputs | depends on sensor type |
| Switching frequency | depends on sensor type |
| Switching state indication | depends on sensor type with FIA-C-06, FIA-C-08, FIA-F, FIA-P-06, FIA-P-08: by means of a LED (yellow) integrated in the sensor housing with FIA-P-15: by means of a LED integrated in the M8-connector with FIA-S, FIA-LBL: by means of a two-color LED (red/green) integrated in the sensor housing with FIA-DUO: by means of two LEDs integrated in the sensor housing (red=output 1, green=output 2) with FIA-F-CON1: by means of a two-color LED (yellow/green) integrated in the sensor housing |
| Dirt accumulation indication | with FIA-F, FIA-F-CON1: by means of a LED (red) integrated in the sensor housing |
| Potentiometer | with FIA-F, FIA-LBL, FIA-F-CON1: for adjustment of sensitivity with FIA-DUO: for adjustment of transmitter power |
| Threshold correction | with FIA-F-...-TC |
| Blast air connector | with FIA-A-H, FIA-A-V |
| Housing material | Aluminum, anodized in blue or black |
| Housing dimensions | depends on sensor type |
| Type of connector (cable or plug) |
depends on sensor type: 3-wire cable (open strands): FIA-C-08-...-3pol 4-wire cable (open strands): FIA-A-H, FIA-A-V, FIA-C-06, FIA-C-08, FIA-LBL-C 5-wire cable (open strands): FIA-F-CON1 3-pole M8-connector: FIA-P-08-...-3pol, FIA-S 4-pole M8-connector: FIA-P-06, FIA-P-08, FIA-P-15, FIA-F, FIA-DUO 4-pole M12-connector: FIA-LBL-P |
| Tool plug (optional) |
with FIA-A-H-...-P, FIA-A-V-...-P: tool plug "P" incl. 8-pole connector Binder Series 712 with FIA-A-H-...-TPN, FIA-A-V-...-TPN: tool plug "TPN" incl. 8-pole connector Binder Series 702 with FIA-C-06-...-TP, FIA-C-08-...-TP: tool plug "TP" incl. 4-pole M12-connector with FIA-C-06-...-TPO, FIA-C-08-...-TPO: tool plug "TPO" incl. 5-pole connector Binder Series 680 |
| Connecting cables | for 3-pole M8-connector: cab-M8/3-... for 4-pole M8-connector: cab-M8/4-... for 4-pole M12-connector: cab-M12/4-...-shd |
| Operating temp. range | -20°C ... +50°C |
| Storage temp. range | -20°C ... +85°C |
| Enclosure rating | IP67 |
| EMC test acc. to | DIN EN 60947-5-2 |
TOP