N° 606
|
Farbmessung von halblichtdurchlässigen Plastikteilen Die Farbe von halblichtdurchlässigen Kunststoffkomponenten soll gemessen werden.
Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
|
|
N° 602
|
Farbmessung an Kunststoffteilen Plastikteile sollen in Hinblick auf die Farbe gemessen werden.
Color measurement of plastic parts
The color of plastic parts should be measured.
|
|
N° 596
|
Unterscheidung zwischen matten und glänzenden Metallteilen Es soll zwischen matten und glänzenden Metallteilen unterschieden werden.
Differentiation of matt and shiny metal parts
Matt metal components should be differentiated from shiny metal parts.
|
|
N° 547
|
Stanzlocherkennung bei transparenten Kunststoffstreifen Stanzlöcher sollen auf transparenten Plastikstreifen erfasst werden.
Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
|
|
N° 471
|
Farbunterscheidung von kleinen Kunststoffbürsten Kleine Plastikbürsten sollen in Hinblick auf die Farbe unterschieden werden.
Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
|
|
N° 416
|
Vorhandenseinskontrolle von Garn am Kunststoff-Schaft einer Spindel Am Kunststoff-Schaft einer Spindel soll die Präsenz von Garn abgefragt werden.
Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
|
|
N° 411
|
Unterscheidung von Gasdruckfedertypen Zwei unterschiedliche Gasdruckfedertypen sollen separiert werden. Die Gasdruckfedern können während der Kontrolle gedreht werden.
Differentiation of pneumatic cylinders
Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis.
|
|
N° 405
|
Vorhandenseinskontrolle eines Innengewindes sowie eines Loches an einem Zahnrad Die Präsenz eines Innengewindes sowie eines Loches an einem Zahnrad soll überwacht werden. Desweiteren soll kontrolliert werden, ob das Loch z.B. durch eine abgebrochene Bohrerspitze blockiert wird.
Presence control of an inside thread and a hole at a gear wheel
The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit.
|
|
N° 399
|
Unterscheidung von semitransparenten Kunststofffolien Halblichtdurchlässige Plastikfolien sollen optisch unterschieden werden.
Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
|
|
N° 398
|
Vorhandenseinskontrolle eines Metallplättchens auf einem Kupferkontakt Die Präsenz eines Metallplättchens auf einem Kupferkontakt soll überwacht werden.
Presence control of small metal plates on a copper contact
The presence of a small and thin metal plate should be detected.
|
|
N° 397
|
Erkennung von Vertiefungen in einer Plastikfolie In einer semitransparenten Folie sollen Vertiefungen präzise erkannt werden. Eine Kontrolle ist dabei nur von oben möglich.
Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
|
|
N° 389
|
Farbkontrolle von Handgriffen Handgriffe im Interieurbereich sollen farblich unterschieden werden.
Color control of handles
Handles in the automotive field should be color controlled.
|
|
N° 367
|
Vorhandenseinskontrolle eines Gummipfropfens in einem Kunststoffschraubverschluss Die Präsenz einer Gummidichtung in einem Plastikteil soll überwacht werden.
Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
|
|
N° 359
|
Kontrolle des Vorhandenseins von Schraubensicherungslack in Innengewinden In Innengewinden soll die Präsenz von Schraubensicherungslack überwacht werden.
Screw locking varnish presence control on female threads
The presence of a thread lock fluid should be controlled on inside threads.
|
|
N° 357
|
Farbunterscheidung von O-Ringen O-Ringe sollen farblich unterschieden werden. Dabei ist zu beachten, dass die Oberfläche der O-Ringe sehr stark glänzt.
Color differentiation of O-rings
O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy.
|
|
N° 318
|
Detektion einer schwarzen sowie einer grauen Lackschicht auf Metallteilen In der Ɛx-Zone einer Sprühkammer sollen nicht lackierte von schwarz bzw. grau lackierten Teilen unterschieden werden.
Detection of black and gray lacquer coat on metal part
In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts.
|
|
N° 311
|
Anwesenheitskontrolle eines Innengewindes in einem Aluminiumgussteil In einem Aluminiumgussteil soll das Vorhandensein eines Innengewindes kontrolliert werden; desweiteren soll ein Innengewinde von einer Bohrung unterschieden werden.
Presence control of a blind thread in aluminum casting
An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole.
|
|
N° 295
|
Erkennung einer fluoreszierenden Beschichtung auf einer schwarzen Gummidichtung Eine Beschichtung auf einer Gummidichtung soll auf Anwesenheit hin kontrolliert werden. Hierzu wird eine fluoreszierende Beschichtung verwendet die mit Hilfe von UV-Licht (365nm … 385nm) angeregt werden kann und dann Licht im blauen Wellenlängenbereich emittiert.
Detection of a fluorescent coating on black rubber seal
The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range.
|
|
N° 265
|
Detektieren eines glänzenden, roten Aufklebers Das Vorhandensein eines glänzenden, roten Aufklebers auf einem schwarzen Kunststoffgehäuse soll kontrolliert werden.
Detection of a red shiny plastic label
The presence of a shiny red plastic label on a black plastic component should be detected.
|
|
N° 254
|
Erkennung von Einkerbungen in einer Aluminiumoberfläche Einkerbungen in einer Aluminiumoberfläche sollen detektiert werden.
Detection of punch marks in aluminum surface
Punch marks in aluminum surface should be detected.
|
|
N° 251
|
Farbunterscheidung dreier Plastikteile im Interieurbereich Graue, schwarze und braune Kunststoffteile, die im Interieurbereich Verwendung finden, sollen unterschieden werden. Dabei ist zu beachten, dass für die Kontrollsysteme äußerst wenig Platz zur Verfügung steht, somit also mit einem Lichtleitersystem zu arbeiten ist.
Color differentiation of plastic interior parts
Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor.
|
|
N° 250
|
Anwesenheitskontrolle eines Primers auf einer schwarz eloxierten Aluminiumoberfläche Das lückenlose Vorhandensein eines Primers auf einer schwarz eloxierten Aluminiumoberfläche soll überwacht werden. Dabei kann der Sensor mit Hilfe einer x-,y- Verstelleinheit der Kontur des Aluminiumkörpers entsprechend nachgefahren werden.
Presence control of a primer on black anodized aluminum
The presence of a primer coating on black anodized aluminum should be controlled.
|
|
N° 223
|
Farbkontrolle von Plastiksiebköpfen Farbabweichungen von Kunststoffsiebköpfen sollen detektiert werden.
Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
|
|
N° 221
|
Anwesenheitskontrolle eines Schmiermittels in einer elektromechanischen Komponente Das Vorhandensein eines Schmiermittels in einem elektromechanischen Bauteil soll überwacht werden.
Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
|
|
N° 218
|
Oberflächenkontrolle von Scharnieren Die Oberfläche von unterschiedlichen Scharnieren soll an bestimmten Stellen kontrolliert werden. Dabei ist zwischen einer glänzenden und einer matten Oberfläche zu unterscheiden.
Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
|
|
N° 217
|
Unterscheidung einer geschliffenen von einer polierten Glasoberfläche Während des Transportes von planparallelen runden Glasscheibchen soll die polierte Vorderseite von der geschliffenen Rückseite unterschieden werden.
Differentiation of the polished surface from the grinded surface of a glass plate
During the handling of glass plates the position of the polished surface must be controlled.
|
|
N° 202
|
Erkennen einer Referenzmarke auf einer Aluminiumfolie Eine gelaserte Referenzmarke auf einer Aluminiumfolie soll detektiert werden. Die Folie kann dabei mit einer Geschwindigkeit von bis zu 60m/min befördert werden.
Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
|
|
N° 159
|
Farbkontrolle von Plastikknöpfen im Interieurbereich Kunststoffknöpfe, wie sie im Automotivebereich zum Einsatz kommen, sollen in Hinblick auf die Farbe unterschieden werden. Zu beachten ist, dass die Ausrichtung der Knöpfe am Kontrollort willkürlich vorliegt.
Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
|
|
N° 129
|
Unterscheidung zwischen Sackloch und Sackgewinde In einem Aluminiumteil soll zwischen einem Sackloch und einem Sackgewinde unterschieden werden.
Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
|
|
N° 119
|
Unterscheidung zweier Farben auf einer Textilbahn Auf einer Textilbahn, wie sie für Sitzbezüge verwendet wird, sollen die beiden Farben erkannt werden.
Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
|
|
N° 118
|
Drehrichtungserkennung und Frequenzmessung einer Aluminiumrolle Die Frequenz sowie die Drehrichtung eines Rollenkörpers aus Aluminium soll erfasst werden. Zum Erkennen der Drehrichtung dienen die seitlich an der Rolle angebrachten Farbmarken.
Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
|
|
N° 117
|
Anwesenheitskontrolle eines Fadens in einer Aluminiumrolle Ein Textilfaden ist in einem Spulenkörper aus Aluminium aufgewickelt. Seitlich durch die im Spulenkörper angebrachten Löcher soll die Präsenz des Fadens abgefragt werden.
Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
|
|
N° 93
|
Unterscheidung von glänzend verchromten von matt verchromten Kunststoffteilen Matt verchromte Plastikkomponenten sollen von glänzend verchromten Kunststoffteilen unterschieden werden. Beide Teile besitzen dabei die gleiche Form; 8mm an Höhe stehen für die Anbringung einer Sensorik zur Verfügung.
Differentiation of chrome plated shiny and chrome plated matt components
Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end.
|
|
N° 89
|
Farbmarkenerkennung auf einer Papierbanderole Eine weiße Farbmarke muss von einem Farbstreifen unterschieden werden. Dabei sind verschiedene Farben des Farbstreifens möglich (gelb, braun, rot, violett, grün und grau). Das Produkt wird mit einer Geschwindigkeit von 10m/s bewegt, die Größe der Farbmarke liegt bei ca. 6mm x 4mm. Die Position der Farbmarke muss präzise angegeben werden.
Color mark detection on a paper banderole
A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark.
|
|
N° 85
|
Erkennung eines weißen Klebebandes auf einem rosafarbenen Airbag-Textilstoff Ein weißes Klebeband auf rosa Textilmaterial soll detektiert werden. Dabei muss der weiße Streifen sicher erkannt werden und es darf auch keine Verwechslung mit den anderen auch auf dem Airbag vorhandenen Abschnitten in blau sowie ebenfalls in weiß, auftreten.
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
|
|
N° 84
|
Farbunterscheidung zwischen einem unbehandelten und einem Schwarz angelassenen Zahnrad Ein schwarz angelassenes Zahnrad soll von einem naturbelassenen Zahnrad unterschieden werden. Dabei sollte der Abstand zwischen Sensor und Messoberfläche ca. 160mm betragen und der Messfleck sollte bei diesem Abstand in etwa eine Größe von 3mm im Durchmesser einnehmen.
Color differentiation between a black and an uncoated metal gear wheel
A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter.
|
|
N° 82
|
Farbmarkenerkennung auf einer Gummidichtung Ein gelb markiertes Feld soll auf einer schwarzen Gummidichtung erkannt werden.
Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
|
|
N° 79
|
Unterscheidung von Kugellagern Kugellager der gleichen Größe aber mit unterschiedlich farbigem Ring müssen erkannt werden. Der Abstand zum Sensor soll mindestens 160mm betragen.
Differentiation of ball bearings
Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm.
|
|
N° 72
|
Erkennung einer Pulverbeschichtung auf einem kohlefaserverstärkten Kunststoffstreifen Nach dem Pulverbeschichtungsprozess soll die Schichtdicke auf einem kohlefaserverstärkten Plastikstreifen kontrolliert werden.
Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
|
|
N° 63
|
Ultraschnelle Detektion von Hologramm-Referenzmarken Hologramm-Referenzmarken besitzen die Eigenschaft, dass Licht unter einem Winkel von 45° auf die Marke auftreffend, direkt rückreflektiert wird. Dieses Verhalten besteht sowohl bei den metallisierten als auch bei den transparenten Folien.
Super fast detection of holographic reference marks in the printing industry
One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils.
|
|
N° 48
|
LED Farbkontrolle Die Farbe von LEDs in elektrischen Zahnbürsten soll überwacht werden. Dabei muss auch die Pulssequenz der LEDs kontrolliert werden.
LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
|
|
N° 46
|
Farbmarkenerkennung auf Aluminiumrohren Rot markierte Stellen auf Aluminiumrohren sollen detektiert werden. Desweiteren sollten auch in schwarz gedruckte Buchstaben erkannt werden.
Color mark detection on aluminum tubes
A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too.
|
|
N° 42
|
Farbkontrolle von Sicherheitsgurtverschlüssen Verschiedene Sicherheitsgurtverschlüsse in den Farbtönen beige, grau und schwarz sollen unterschieden werden.
Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
|
|
N° 41
|
Farbunterscheidung von Schalterelementen im Automotive-Interieurbereich Während der Montage von Schalterelementen ins Armaturenbrett, in die Seitentür oder in die Dachinnenverkleidung soll die Farbe der Schalterelemente kontrolliert werden. Da für diese Schalterelemente teilweise auch die Lacke verwendet werden, wie sie für das Auto an sich eingesetzt werden, hat man es mit hochglänzenden Farben zu tun.
Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
|
|
N° 40
|
Farbunterscheidung von Kunststoffkomponenten im Automotive-Interieurbereich In der Automobilindustrie wird im Interieurbereich eine Reihe von Kunststoffkomponenten eingesetzt. Unter anderem werden die Komponenten in Autotüren, Autositzen, in der Dachverkleidung und beim Armaturenbrett eingesetzt. Verschiedene Grau-, Beige- und Schwarztöne müssen unterschieden werden.
Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
|
|
N° 31
|
Farbunterscheidung von Kunststoffteilen wie sie im Automotive-Interieurbereich zum Einsatz kommen Plastikteile die im Automotive-Interieurbereich eingesetzt werden, sollen in Hinblick auf die Farbe überwacht werden.
Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
|
|
N° 23
|
Farbkontrolle von Flüssigkeiten Im Wasserkreislauf soll die Wasserqualität kontrolliert werden. Es kann dabei vorkommen, dass die Flüssigkeit leicht bläulich bzw. beige eingefärbt ist, was ein Anzeichen für eine Verschmutzung darstellt. Der Farbumschlag soll überwacht werden.
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
|
|
N° 19
|
Erkennen einer schwarzen Markierung auf einer Metalltube Eine mit einem Piezodruckkopf aufgebrachte Ringmarkierung auf eine Metalltube soll in Hinblick auf Präsenz und auf Lagerichtigkeit überwacht werden.
Black ink mark control on metal tubes
On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient.
|
|
N° 3
|
Unterscheidung zwischen Vorder- und Rückseite von laminierten Bändern Die Vorderseite laminierter Bänder soll von der Rückseite unterschieden werden. Es kommen weiße, schwarze und rote Bänder vor.
Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
|
|
N° 2
|
Unterscheidung der Vorder- und Rückseite von Klettverschlüssen Während des Aufklebens von Klettverschlussstreifen muss die Vorder- von der Rückseite unterschieden werden
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
|
|