Exemplos prácticos de uso industrial

1) Selecione uma área de aplicação:
Packaging Industry (Verpackungsindustrie)

2) Selecione um idioma:

Folha de
dados:

APP N° 792

Отличие лицевой стороны алюминиевой фольги с покрытием от ее обратной стороны
Лицевую сторону алюминиевой фольги с покрытием необходимо отличить от ее обратной стороны.

Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.

Folha de
dados:

APP N° 791

INI:

Контроль наличия бутылочек в упаковках для лекарств
Необходимо контролировать наличие стеклянных бутылочек в упаковках для лекарств.

Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.

Folha de
dados:

APP N° 783

Обнаружение края бумажных мешков и гофрокартона
Необходимо обнаружить края транспортируемых, расположенных каскадами, сложенных бумажных мешков, а также гофрокартона.

Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.

Folha de
dados:

APP N° 773

Контроль наличия прозрачных наклеек на пластмассовых крышках
Необходимо контролировать наличие прозрачных наклеек на пластмассовых крышках.

Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.

Folha de
dados:

APP N° 771

Контроль цвета деревянных палочек
Необходимо контролировать цвет деревянных палочек.

Color control of wooden sticks
The color of wooden sticks should be controlled.

Folha de
dados:

APP N° 738

Param.:

Распознавание мест склейки на сигаретах
Необходимо обнаружить на сигаретах место склейки.

Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.

Folha de
dados:

APP N° 737

Param.:

Обнаружение сварного шва на жестяных банках
Необходимо обнаружить сварные швы на жестяных банках.

Welding line detection of tin cans
The welding line on tin cans should be detected.

Folha de
dados:

APP N° 728

Param.:

Обнаружение сварного шва на жестяной банке
Необходимо обнаружить сварной шов на жестяной банке с печатным изображением.

Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.

Folha de
dados:

APP N° 717

Param.:

Счет складок алюминиевых шлангов
Необходимо осуществить счет складок алюминиевых шлангов. При этом следует учесть, что расстояния между складками могут быть разными.

Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.

Folha de
dados:

APP N° 716

Param.:

Счет прозрачных пластиковых крышек
Необходимо осуществить счет прозрачных пластиковых крышек.

Counting of transparent plastic lids
Transparent plastic lids should be counted.

Folha de
dados:

APP N° 715

Param.:

Счет прозрачных пластиковых стаканчиков
Необходимо осуществить счет прозрачных пластиковых стаканчиков.

Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.

Folha de
dados:

APP N° 713

Param.:

Счет прозрачных пластиковых контейнеров
Необходимо осуществить счет прозрачных пластиковых контейнеров, установленных в один ряд вплотную друг к другу.

Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.

Folha de
dados:

APP N° 712

Счет бумажных пакетов
Непосредственно после изготовления бумажных пакетов осуществляется их счет на ленте транспортера. При этом следует учесть, что, во-первых, каждый пакет имеет двойной край и, во-вторых, расстояние между пакетами, а также высота стопы могут изменяться.

Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.

Folha de
dados:

APP N° 710

Счет уложенных в стопку пластиковых крышек
Необходимо бесконтактным способом определить число пластиковых крышек в стопке.

Counting of stacked plastic lids
Stacked plastic lids should be counted.

Folha de
dados:

APP N° 702

Распознавание цветных меток на бумажной упаковке
Необходимо распознать цветные метки на бумажных пакетах. При этом следует учесть, что распознаваться должны как черные цветные метки на белом фоне, так и белые цветные метки на черном фоне.

Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.

Folha de
dados:

APP N° 692

Контроль наличия отрывного пояска на сигаретных пачках
Необходимо проверить наличие отрывного пояска на упаковках сигарет.

Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.

Folha de
dados:

APP N° 691

Param.:

Распознавание цветной метки на металлической фольге
Обнаружение различных цветных меток на металлической фольге разного цвета.

Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.

Folha de
dados:

APP N° 690

Распознавание промежутка в полоске клея, нанесенной на алюминиевую фольгу
Следует распознавать промежутки в полоске клея на алюминиевой фольге, начиная с размера в 5мм x 1мм.

Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.

Folha de
dados:

APP N° 688

Распознавание мест склейки сигаретных фильтров
Необходимо контролировать качество мест склейки сигаретных фильтров.

Splice inspection of cigarette filters
The splices of cigarettes should be controlled.

Folha de
dados:

APP N° 687

Контроль наличия прозрачных наклеек
Необходимо проконтролировать наличие прозрачных этикеток.

Presence control of transparent labels
The presence of transparent labels should be controlled.

Folha de
dados:

APP N° 685

Контроль слоя клея на пластиковых лентах
Необходимо контролировать толщину клеевого слоя на пластиковой ленте.

Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.

APP N° 674

INI:

Счет металлических крышек
Необходимо сосчитать металлические крышки в стопе.

Counting of metal lids
Metal lids should be counted in a stack.

Folha de
dados:

APP N° 672

Param.:

Контроль наличия флуоресцирующей полупрозрачной крышки на белой пластмассовой емкости
Необходимо проверить наличие флуоресцирующей полупрозрачной крышки на пластиковой емкости.

Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.

Folha de
dados:

APP N° 670

Param.:

Обнаружение следов клея на бумаге сигаретного фильтра
Необходимо обнаружить следы клея на бумаге сигаретного фильтра. При этом следует учесть, что клей растворим в воде.

Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.

Folha de
dados:

APP N° 669

Param.:

Распознавание капсул различного цвета в сигаретных фильтрах
Необходимо распознать окрашенные в разные цвета капсулы в стержне сигаретного фильтра.

Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.

Folha de
dados:

APP N° 662

Param.:

Контроль экстремально слабых распыленных струй
Следует контролировать наличие и плотность чрезвычайно слабой распыленной струи.

Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.

Folha de
dados:

APP N° 657

Param.:

INI:

Определение различия цвета полупрозрачных шариков в прозрачных пластиковых трубках
Необходимо различить по цвету полупрозрачные цветные шарики, которые находятся внутри прозрачных трубчатых участков фильтрующих стержней.

Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.

Folha de
dados:

APP N° 656

Param.:

INI:

Контроль цвета полупрозрачных шариков в прозрачных пластиковых трубках
Необходимо контролировать цвет полупрозрачных, цветных шариков, которые находятся в прозрачных пластиковых участках трубок фильтра.

Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.

Folha de
dados:

APP N° 646

Param.:

Распознавание цветной контрольной метки на напечатанной алюминиевой фольге
Необходимо распознать черную блестящую метку на черной матовой алюминиевой фольге и контрольную метку насыщенного оранжевого цвета на оранжевом фоне.

Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.

Folha de
dados:

APP N° 645

Param.:

Распознавание цветной контрольной метки на алюминиевой фольге
Необходимо распознать цветную метку на алюминиевой фольге.

Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.

Folha de
dados:

APP N° 628

Отличие лицевой стороны фильтровальной бумаги с нанесенным не ней клеевым покрытием от оборотной стороны бумаги без покрытия
Необходимо проконтролировать, расположена сверху лицевая или оборотная сторона фильтровальной бумаги. При этом только на лицевую сторону нанесен слабо флуоресцирующий слой клея.

Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.

Folha de
dados:

APP N° 625

Распознавание надреза на металлизированных пластиковых картах
Необходимо обнаружить надрез на металлизированной пластиковой карте.

Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.

APP N° 594

Param.:

Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.

Folha de
dados:

APP N° 574

Param.:

INI:

Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.

Folha de
dados:

APP N° 572

Param.:

Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.

Folha de
dados:

APP N° 571

Param.:

Cigarette filter differentiation
Cigarette filter segments should be differentiated.

Folha de
dados:

APP N° 570

Param.:

Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.

Folha de
dados:

APP N° 562

Param.:

Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.

Folha de
dados:

APP N° 558

Param.:

Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.

Folha de
dados:

APP N° 462

Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.

Folha de
dados:

APP N° 436

Param.:

Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.

Folha de
dados:

APP N° 433

Param.:

INI:

Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.

Folha de
dados:

APP N° 421

Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.

Folha de
dados:

APP N° 420

Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.

Folha de
dados:

APP N° 392

Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.

Folha de
dados:

APP N° 369

Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.

Folha de
dados:

APP N° 367

Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.

Folha de
dados:

APP N° 342

Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.

Folha de
dados:

APP N° 330

Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.

Folha de
dados:

APP N° 321

Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.

Folha de
dados:

APP N° 317

Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.

Folha de
dados:

APP N° 312

Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.

Folha de
dados:

APP N° 308

Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.

Folha de
dados:

APP N° 301

Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.

Folha de
dados:

APP N° 294

Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.

Folha de
dados:

APP N° 287

Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.

Folha de
dados:

APP N° 280

Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.

Folha de
dados:

APP N° 252

Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.

Folha de
dados:

APP N° 241

Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.

Folha de
dados:

APP N° 233

Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.

Folha de
dados:

APP N° 231

Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.

Folha de
dados:

APP N° 230

Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.

Folha de
dados:

APP N° 224

Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.

Folha de
dados:

APP N° 212

Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.

Folha de
dados:

APP N° 202

Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.

Folha de
dados:

APP N° 201

Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.

Folha de
dados:

APP N° 200

Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.

Folha de
dados:

APP N° 180

Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.

Folha de
dados:

APP N° 178

Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.

Folha de
dados:

APP N° 176

Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.

Folha de
dados:

APP N° 172

Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.

Folha de
dados:

APP N° 158

Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.

Folha de
dados:

APP N° 148

Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.

Folha de
dados:

APP N° 147

Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.

Folha de
dados:

APP N° 140

Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.

Folha de
dados:

APP N° 128

Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).

Folha de
dados:

APP N° 122

Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.

Folha de
dados:

APP N° 121

Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.

Folha de
dados:

APP N° 120

Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.

Folha de
dados:

APP N° 105

Spray jet amount control
The density of the spray jet should be controlled.

Folha de
dados:

APP N° 103

Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.

Folha de
dados:

APP N° 96

Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.

Folha de
dados:

APP N° 95

Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.

Folha de
dados:

APP N° 94

Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.

Folha de
dados:

APP N° 90

Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.

Folha de
dados:

APP N° 78

Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.

Folha de
dados:

APP N° 76

Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.

Folha de
dados:

APP N° 72

Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.

Folha de
dados:

APP N° 64

Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.

Folha de
dados:

APP N° 29

Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.

Folha de
dados:

APP N° 28

Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.

Folha de
dados:

APP N° 27

Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.

Folha de
dados:

APP N° 20

Closure head color control
Different plastic closure heads should be color controlled.

Folha de
dados:

APP N° 14

Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.

Aplicações

Exemplos prácticos de uso industrial

NOTICIA

FIND US ON ....

	Calibração de cores em linha em reciclados de plástico (Sistemas de medição de cores em linha)
	Test report on Inline color measurement of recyclates () (Sistema de medição de cores em linha)

	Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
	Checking the plastic type of recyclates and virgin material using NIR technology ()

	Detecção de mossas e amolgadelas em fitas de punção metálicas (N° 801)
	Distinção de componentes interiores de couro e plástico (N° 802)
	Medição de cor das tampas plásticas (N° 803)