Exemplos prácticos de uso industrial

1) Selecione uma área de aplicação:
Packaging Industry (Verpackungsindustrie)

2) Selecione um idioma:

Folha de
dados:

APP N° 792

Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.

Folha de
dados:

APP N° 791

INI:

Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.

Folha de
dados:

APP N° 783

Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.

Folha de
dados:

APP N° 773

Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.

Folha de
dados:

APP N° 771

Color control of wooden sticks
The color of wooden sticks should be controlled.

Folha de
dados:

APP N° 738

Param.:

Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.

Folha de
dados:

APP N° 737

Param.:

Welding line detection of tin cans
The welding line on tin cans should be detected.

Folha de
dados:

APP N° 728

Param.:

Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.

Folha de
dados:

APP N° 717

Param.:

Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.

Folha de
dados:

APP N° 716

Param.:

Counting of transparent plastic lids
Transparent plastic lids should be counted.

Folha de
dados:

APP N° 715

Param.:

Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.

Folha de
dados:

APP N° 713

Param.:

Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.

Folha de
dados:

APP N° 712

Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.

Folha de
dados:

APP N° 710

Counting of stacked plastic lids
Stacked plastic lids should be counted.

Folha de
dados:

APP N° 702

Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.

Folha de
dados:

APP N° 692

Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.

Folha de
dados:

APP N° 691

Param.:

Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.

Folha de
dados:

APP N° 690

Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.

Folha de
dados:

APP N° 688

Splice inspection of cigarette filters
The splices of cigarettes should be controlled.

Folha de
dados:

APP N° 687

Presence control of transparent labels
The presence of transparent labels should be controlled.

Folha de
dados:

APP N° 685

Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.

APP N° 674

INI:

Counting of metal lids
Metal lids should be counted in a stack.

Folha de
dados:

APP N° 672

Param.:

Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.

Folha de
dados:

APP N° 670

Param.:

Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.

Folha de
dados:

APP N° 669

Param.:

Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.

Folha de
dados:

APP N° 662

Param.:

Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.

Folha de
dados:

APP N° 657

Param.:

INI:

Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.

Folha de
dados:

APP N° 656

Param.:

INI:

Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.

Folha de
dados:

APP N° 646

Param.:

Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.

Folha de
dados:

APP N° 645

Param.:

Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.

Folha de
dados:

APP N° 628

Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.

Folha de
dados:

APP N° 625

Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.

APP N° 594

Param.:

Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.

Folha de
dados:

APP N° 574

Param.:

INI:

Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.

Folha de
dados:

APP N° 572

Param.:

Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.

Folha de
dados:

APP N° 571

Param.:

Cigarette filter differentiation
Cigarette filter segments should be differentiated.

Folha de
dados:

APP N° 570

Param.:

Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.

Folha de
dados:

APP N° 562

Param.:

Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.

Folha de
dados:

APP N° 558

Param.:

Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.

Folha de
dados:

APP N° 462

Optælling af foldede papirposer
Foldede papirposer som transporteres på et transportbånd, skal tælles.

Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.

Folha de
dados:

APP N° 436

Param.:

Positionsmåling på cigaretfiltre
Positionen på cigaretfiltre skal aftastes præsist, selv ved høje emnehastigheder på flere m/s.

Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.

Folha de
dados:

APP N° 433

Param.:

INI:

Farvegenkending af plastlåg
Plastlåg som anvendes til drikkeflasker, skal aftastes og sorteres efter farve. Ved opgaven skal bemærkes at låget har ekstrem glansgrad.

Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.

Folha de
dados:

APP N° 421

Aftastning af et fluorescerende klæbelag på en plastpose
På en plastpose skal et klæbelag som reagerer fluorescerende ved UV-belysning aftastes. Man skal her være opmærksom på at klæbelaget er dækket af et kunststofbånd.

Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.

Folha de
dados:

APP N° 420

Aftastning af klæbestribe på plastkonvolutter
En klæbestribe skal aftastes på en plastkonvolut. Klæbestriben forårsager en let bølget overflade på den modstående side. Da klæbesiden er dækket af en højglans folie, er man tvunget til at foretage kontrollen fra bagsiden.

Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.

Folha de
dados:

APP N° 392

Positionskontrol af plastfilm på papkasse
Positionen på en kunstfolie på en papkasse skal overvåges. Folien skal dække de øverste 10 mm.

Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.

Folha de
dados:

APP N° 369

Aftastning af farvemarkering på plastfolie
Et sort højglans farvemærke skal aftastes på en ligeledes højglans folie, med skiftende

Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.

Folha de
dados:

APP N° 367

Kontrol for tilstedeværelse af gummipakning i kunststofkabelforskruning
Tilstedeværelsen af en gummipakningsring i en plastdel skal overvåges.

Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.

Folha de
dados:

APP N° 342

Kontrol for tilstedeværelse af kunststoffilm
Tilstedeværelsen af en semitransparent folie på en kuvert skal aftastes. Det skal bemærkes at klæbefilmen er let flourscerende, hvorimod den matte film som er placeret ovenpå dæmper denne egenskab.

Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.

Folha de
dados:

APP N° 330

Aftastning af transparent flourscerende etiket på transparent bærefilm
En transparent etiket, placeret på en transparent folie, skal aftastes. Etiketten reagerer flourscerende ved påvirkning af UV-lys.

Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.

Folha de
dados:

APP N° 321

Aftastnign af lim-linie på indpakningspapir
Tilstedeværelsen af lim-linie skal kontrolleres. Limen har fluorscerende egenskaber.

Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.

Folha de
dados:

APP N° 317

Aftastning af fluorescerende stribe på billetter
En under UV – lys påvirket flourescerende stribe skal aftastes.

Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.

Folha de
dados:

APP N° 312

Detektering af forskellige farvemærker på forskelligt farvede plastbeholdere
På kunststoftuber i forskellige udførsler, skal farvemærker genkendes.

Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.

Folha de
dados:

APP N° 308

Kontrol af tilstedeværelse af hæfteplaster på transparent pose
Et hæfteplaster som lyser op ved påvirkning af UV-lys skal overvåges.

Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.

Folha de
dados:

APP N° 301

Kantgenkendelse på fronten af en silikonetube
En markering med form som en forhøjning, skal aftastes under drejning. Der anvendes en kantensensor, som placeres vinkelret på positionen på tuben.

Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.

Folha de
dados:

APP N° 294

Kontrol af tykkelse på alufoliepude med stor glansgrad
Tykkelsen af en pude, som er overtrukket med alufolie, skal måles. Puden anvendes til varmeisolering. Puden placeres på et transportbånd som stort set ingen højdevariation har og derved kann anvendes som referencepunkt.

Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.

Folha de
dados:

APP N° 287

Farvemærkeaftastning på en trykt alubelagt folie
Et sort farvemærke skal aftastes på en alu-belagt folie. Til nøjagtig positionering af folien skal sorte farvemærker på en alubelagt folie aftastes. Til signalgivningen skal anvendes et digitalt signal.

Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.

Folha de
dados:

APP N° 280

Positionsaftastnign af kant på en plasttube
Under drejning af en plasttube skal kanten på fronten aftastes.

Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.

Folha de
dados:

APP N° 252

Skilleliniedetektion på et hvidt kunststofbånd
Skillelinien på et hvidt kunststofbånd skal aftastes med en sensor som anvendes som diffus.

Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.

Folha de
dados:

APP N° 241

Farbmærkegenkending på trykt kunststoffolie
Et sort trykmærke på en spraglet trykt plastfilm skal aftastes. Trykmærket skal ligeledes genkendes på transparent baggrund.

Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.

Folha de
dados:

APP N° 233

Genkendelse af fluoriserende etiketter på metalfoliepakninger
Tilstedeværelsen af en blå fluoriserende etiket (under påvirkning af UV-lys med 365nm … 385nm) på for eller bagsiden af sølg henholdsvis guldfarvet metalfolieindpakning.

Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.

Folha de
dados:

APP N° 231

Detektion af farvevariation på transperant kunststofglas
Farvevariation på farvede transperante kunststofglas skal under drejning kontrolleres og aftastes.

Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.

Folha de
dados:

APP N° 230

Farvekontrol af transperante kunststofbægre
Farven på transperante kunststofbægre skal kontrolleres. Specielt skal bemærkes at der fra batch til batch kann ske farveændringer, hvilket er tilladt indenfor toleranceområdet.

Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.

Folha de
dados:

APP N° 224

Aftastning af kunststofflasker med forskellig vægtykkelse
Plastdåser mad samme farve og kontur skal kontrolleres for forskellige vægtykkelser.

Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.

Folha de
dados:

APP N° 212

Aftastning af fluorescerende labels på trykt cigarettepakkepapir
En klæbeoverflade på trykte cigarettepakker er markeret med fluorescerende label. Opgaven er at aftaste denne label.

Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.

Folha de
dados:

APP N° 202

Aftastning af et trykt referencemærke på en aluminiumsfolie
Et laserbrændt referencemærke på en aluminiumsfolie skal aftastes. Under denne funktion er hastigheden ca. 60m/min.

Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.

Folha de
dados:

APP N° 201

Farvekontrol på plastlåg
Farven på plastlåg skal kontrolleres. Hovedopgaven er ikke at skelne mellem farverne, men om den samme type låg ligger inden for en given tolerance.

Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.

Folha de
dados:

APP N° 200

Farvekontrol på PET forme
Forskellige farvede PET forme, som anvendes i aftapningsindustrien skal skelnes.

Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.

Folha de
dados:

APP N° 180

Aftastning af perforeret linie på plastfilm
En perforeringslinie skal aftastes på en plastfilm. Under denne aftastning er hastisgheden på plasfilmen nogle få m/s og diameteren på hullerne i plastfilmen er ca. 0.3mm.

Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.

Folha de
dados:

APP N° 178

Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.

Folha de
dados:

APP N° 176

Farvehenkending af plastflasker
Under genbrugsprocessen skal forskellige farver PET-flasker sorteres. Selv kun let blåtonede plastflasker skal skelnes fra klare PET-flasker. Hastigheden på flaskerne ligger i processen på et par meter / sekund. I flaskerne kann der findes kondens, som ses som vanddråber. Endvidere kann der være etiketter på flaskerne.

Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.

Folha de
dados:

APP N° 172

Præsis optælling af folder på aluminiumsslange/rør
Folderne på et aluminiumsrør skal tælles under hurtig bevægelse (nogle få m/s) af røret.

Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.

Folha de
dados:

APP N° 158

Kantpositionskontrol på transparent plastfilm
Positionen på kanten af en transparent plast film skal checkes.

Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.

Folha de
dados:

APP N° 148

Aftastning af farvemærker på spraydåser
Farvemærker skal aftastes på forskellige spraydåser. Man skal være opmærksom på at både baggrundsfarve og limgrænser.

Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.

Folha de
dados:

APP N° 147

Kontrol af tilstedeværelse af tråd på tampon
Trådens placering bag på tamponen skal kontrolleres. Rigtig position betyder at den turkisfarvede tråd skal dække stort set hele bagsiden. Placeringen skal kontrolleres gennem en transparent plastfilm.

Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.

Folha de
dados:

APP N° 140

Kontrol af coating på metalplader
Tilstedeværelsen af coating på en metalplade skal kontrolleres.

Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.

Folha de
dados:

APP N° 128

Farvekontrol på fluorescerende farve på en cigaretpakke
Farven så vel som intensiteten på en fluorescerende farve på en cigaretpakke skal kontrolleres. Det skal nævnes at der findes andre fluorescerende mærker på pakken, men disse er i andre farver.

Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).

Folha de
dados:

APP N° 122

Kontrol af retning på kapsler
Retningen på kapsler I et mekanisk fødesystem skal kontrolleres. Kapslerne består af to dele, hvor den ene del har en diameter, som er ca. 0,3 mm større end den anden. Kapslerne bevæges I længderetningen med en hastighed på 0,4 m/s og diameteren på de forskellige typer ligger mellem 3mm og 8mm. Farven på kapslerne kan variere mellem hvis til sort og hvor selv transparente farver en mulige.

Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.

Folha de
dados:

APP N° 121

Kontrol af rilleprofil på transperant plastlåg
På et transperant låg, skal rilleprofilen kontrolleres. På ukorrekte låg er rilleprofilen manglende eller delvis manglende.

Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.

Folha de
dados:

APP N° 120

Doublelagskontrol på transperent film
Tilstedeværelsen af blisterfolie skal kontrolleres med diffus sensorsystem. Yderligere skal der skelnes mellem en, to eller tre blisterpakninger.

Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.

Folha de
dados:

APP N° 105

Dysekontrol for mængde
Densitet af dysebillede skal kontrolleres.

Spray jet amount control
The density of the spray jet should be controlled.

Folha de
dados:

APP N° 103

Kontrol af antal blisterpakninger
Under håndteringen af blisterkninger kan det ske, at mere end en blisterpakning bliver taget med, dette skal undgås.

Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.

Folha de
dados:

APP N° 96

Skelne mellem forside og bagside på låg
Under produktionen af dispensere for vådservietter skal orienteringen af låget kontrolleres.

Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.

Folha de
dados:

APP N° 95

Kontrol af banderole på cigaretpakke
På cigaretpakker skal banderolens tilstedeværelse kontrolleres. På checkpositionen er pakken allerede pakket og bandarolen er indpakket I transperant blank film.

Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.

Folha de
dados:

APP N° 94

Inspektion på perforeret cigaretpapir
Under perforering med laser af cigaretpapir, sker det til tider at papiret bliver forbrændt rundt om hullet. På afstand ser papiret ud til at være hvidt med grå striber. De perforerede striber skal kontrolleres inline, uanset farve intensitet og/eller skift til gråtoner. Yderligere skal man kunne skelne mellem brændte striber, let brændte striber, gode striber og ingen striber.

Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.

Folha de
dados:

APP N° 90

Kontrol af tilstedeværelsen af korkprop på vinflasker
Kontrol af tilstedeværelsen af korkproppen skal ske på en produktionslinie. På linien findes forskelligt farvede flasker, forskllige højder. Et andet problem er at farven på proppen kan variere fra batch til batch.

Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.

Folha de
dados:

APP N° 78

Optælling af papirposer
Under produktionen af papirposer og lige inden pakning, skal antallet af poser tælles. I applikationen kan både produktionshastighed og afstand til sensoren ændres, derfor arbejdes der med et arbejdsområde på 80mm. Sensoren skal klare hastigheder nede fra 0 op til 50.000 poser / time. Yderligere kan afstanden mellem kanterne mellem to poser variere og på grund af transportsystemet kommer der til tider små huller I papiroverfladen.

Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.

Folha de
dados:

APP N° 76

Fluorescerende mærkekontrol på låg I medicinalindustrien
Fro at skelne mellem original og kopiprodukter, markeres originale låg med en fluorescerende farve. Farven skal genkendes under pakkeprocessen.

Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.

Folha de
dados:

APP N° 72

Aftastning af pulverlakeringen på kulfiberforstærkede plastfilm
Under pulverlakeringen af kulfiberforstærkede plastfilm, skal kvaliteten (lagtykkelsen kontrolleres).

Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.

Folha de
dados:

APP N° 64

Farvegenkendelse mellem overfladebehandlede og ubehandlede rør
Den indvendige side af et rør skal kontrolleres for at se om det er overfladebehandlet eller ej. Det overfladebehandlede emne er let gult, hvor den ubehandlede er sølvfarvet.

Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.

Folha de
dados:

APP N° 29

Måling af længde på ekstruderede metalrør under produktionsprocessen
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. Nøjagtigheden på metalrøret, skal være inden for en tiendedel millimeter.

Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.

Folha de
dados:

APP N° 28

Kontrol af fluorescerende lim på papirposer
Under produktionen af papirposer, anvendes fluorescerende lim til at lukke poserne I bunden. Til tider, på grund af forskellige forhold (defekter på printerhoved, hærdet lim og manglende lim) kommer der intet lim på posen og posen ender som skrot.

Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.

Folha de
dados:

APP N° 27

Aftastning af farvemærker (registermærker)
Under printprocessen på plastfolier til fødevareindustrien, skal farvemærket aftastes på hver printenhed.

Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.

Folha de
dados:

APP N° 20

Kontrol af farven på låg
Kontrol af forskellige låg skal farvekontrolleres.

Closure head color control
Different plastic closure heads should be color controlled.

Folha de
dados:

APP N° 14

Højdekontrol af label med transparent plastfront
Højden på en label skal måles, hvor fronten er belagt med en optisk transparent belægning. Målingen skal ske med en nøjagtighed 0.1mm.

Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.

Aplicações

Exemplos prácticos de uso industrial

NOTICIA

FIND US ON ....

	Calibração de cores em linha em reciclados de plástico (Sistemas de medição de cores em linha)
	Test report on Inline color measurement of recyclates () (Sistema de medição de cores em linha)

	Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
	Checking the plastic type of recyclates and virgin material using NIR technology ()

	Detecção de mossas e amolgadelas em fitas de punção metálicas (N° 801)
	Distinção de componentes interiores de couro e plástico (N° 802)
	Medição de cor das tampas plásticas (N° 803)