Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Esempi di applicazioni pratiche nell'uso industriale


Selezionare una lingua:



Scheda
Dati:


APP N° 803

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastic cap color measurement
The color of plastic caps should be measured.
Scheda
Dati:


APP N° 802

Automotive Industry (Automobilindustrie)   
Differentiation of leather, fabric and synthetic interior components
Leather, fabric and plastic interior parts should be differentiated.
Scheda
Dati:


APP N° 801

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Detection of dents and bumps on metal punching strips
Dents and bumps on metal punching strips should be detected.
Scheda
Dati:


APP N° 800

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
Detection of deformations on stamping stripes
Deformations on stamping stripes should be detected.
Scheda
Dati:


APP N° 799

Synthetic Industry (Kunststoffindustrie)   
Param.:
Presence control of a potting compound on plastic components
The presence of a sealing compound on plastic components should be controlled.
Scheda
Dati:


APP N° 798

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of leather and plastic interior components
Leather and synthetic interior parts should be differentiated.
Scheda
Dati:


APP N° 797

Synthetic Industry (Kunststoffindustrie)   
Color control of preforms made of recyclates
Preforms made of recycled material should be color controlled.
Scheda
Dati:


APP N° 796

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of rubber buffers from a distance
The color of rubber buffers should be controlled from a distance.


APP N° 795

Synthetic Industry (Kunststoffindustrie)   
Translucent stretch film thickness measurement
The thickness of a translucent stretch film should be measured.
Scheda
Dati:


APP N° 794

Chemical Industry (Chemische Industrie)   
Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
Scheda
Dati:


APP N° 793

Synthetic Industry (Kunststoffindustrie)   
Color control of preforms
The color of preforms should be controlled.
Scheda
Dati:


APP N° 792

Packaging Industry (Verpackungsindustrie)   
Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.
Scheda
Dati:


APP N° 791

Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
INI:
Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.
Scheda
Dati:


APP N° 790

Synthetic Industry (Kunststoffindustrie)   
INI:
Gloss measurement of synthetic floorings
The gloss of plastic floors should be measured.
Scheda
Dati:


APP N° 789

Synthetic Industry (Kunststoffindustrie)   
Plastic film thickness measurement
The thickness of plastic stretch film should be measured.
Scheda
Dati:


APP N° 788

Synthetic Industry (Kunststoffindustrie)   
Param.:
Streak detection on a plastic surface
A plastic surface should be controlled regarding freedom from streaks and striae.
Scheda
Dati:


APP N° 787

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Frequency control of electric motors
The frequency of electric motors should be controlled.
Scheda
Dati:


APP N° 786

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Spray jet control
A pulsed, weakly dosed spray jet should be controlled.
Scheda
Dati:


APP N° 785

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Width control of metal sheets
The width of very fast moved metal sheets should be measured.
Scheda
Dati:


APP N° 784

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Wire detection and counting during the braiding process
Wires should be detected and counted during the braiding process.
Scheda
Dati:


APP N° 783

Packaging Industry (Verpackungsindustrie)   
Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.
Scheda
Dati:


APP N° 782

Textile Industry (Textilindustrie)   
Param.:
Seam detection on fabrics
The seam on technical fabrics should be detected.
Scheda
Dati:


APP N° 781

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Mesh control on metal braided hoses
Meshes on metal braided hoses should be controlled.
Scheda
Dati:


APP N° 780

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Meshes control on fabric hoses
The meshes of a braided hose should be controlled.
Scheda
Dati:


APP N° 779

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Color-gloss control of lacquered metal sheets
Lacquered metal sheets should be controlled with regard to the color and gloss.
Scheda
Dati:


APP N° 778

Automotive Industry (Automobilindustrie)   
Differentiation of leather and synthetic interior components
Leather and plastics interior parts should be differentiated.
Scheda
Dati:


APP N° 777

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Defect recognition on saw blade discs
Defects on saw blade discs should be detected.
Scheda
Dati:


APP N° 776

Textile Industry (Textilindustrie)   
Seam detection on towels
The seam on towels should be detected.
Scheda
Dati:


APP N° 775

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Grey carpet differentiation
Grey carpets should be differentiated.
Scheda
Dati:


APP N° 774

Synthetic Industry (Kunststoffindustrie)   
Differentiation of PE and PET side of plastic plates
The PET side of plastic plates should be differentiated from the PE side.
Scheda
Dati:


APP N° 773

Packaging Industry (Verpackungsindustrie)   
Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.
Scheda
Dati:


APP N° 772

Textile Industry (Textilindustrie)   
Thickness control of abrasive carpets
The thickness of abrasive carpets should be measured.
Scheda
Dati:


APP N° 771

Packaging Industry (Verpackungsindustrie)   
Color control of wooden sticks
The color of wooden sticks should be controlled.
Scheda
Dati:


APP N° 770

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Gloss measurement of sandpapers
The gloss factor of sandpapers should be measured.
Scheda
Dati:


APP N° 769

Automotive Industry (Automobilindustrie)   
Param.:
Color control of light pipes
The color of light pipes should be controlled.
Scheda
Dati:


APP N° 768

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Color measurement of lacquered aluminum plates
The color of lacquered aluminum plates should be measured.
Scheda
Dati:


APP N° 767

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Gloss measurement of painted aluminum plates
The gloss factor of lacquered aluminum plates should be measured.
Scheda
Dati:


APP N° 766

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Gloss measurement on decorative films
The gloss factor should be measured on different decorative films.
Scheda
Dati:


APP N° 765

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color mark recognition on transparent plastic films
A color mark on a translucent synthetic tape should be recognized.
Scheda
Dati:


APP N° 764

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Synthetic component orientation control
The orientation of transparent plastic parts should be controlled.
Scheda
Dati:


APP N° 763

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color mark detection on transparent plastic adhesive strips
Color marks should be detected on transparent synthetic glue strips.
Scheda
Dati:


APP N° 762

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Position control of metal stamping parts
The position of metal stamping parts should be controlled.
Scheda
Dati:


APP N° 761

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Color measurement of synthetic wires
The color of synthetic wires should be measured.
Scheda
Dati:


APP N° 760

Automotive Industry (Automobilindustrie)   
Param.:
Differentiation of interior leather and plastic parts
Interior leather and plastic parts should be differentiated.
Scheda
Dati:


APP N° 759

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of leather and synthetic interior components
Leather interior components should be differentiated from synthetic interior components.
Scheda
Dati:


APP N° 758

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of interior plastic components
Interior plastic parts should be differentiated.
Scheda
Dati:


APP N° 757

Automotive Industry (Automobilindustrie)   
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled.
Scheda
Dati:


APP N° 756

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Detection of a rising and falling edge of a metal stripe on metal sheet
A rising as well as a falling edge of a metal stripe on metal sheet should be detected.
Scheda
Dati:


APP N° 755

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Inside diameter differentiation of threaded nuts
M8 and M10 screw-nuts should be inline differentiated by inner diameter measurement.
Scheda
Dati:


APP N° 754

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Inner diameter control of screw-nuts
The inner diameter of screw-nuts should be measured.
Scheda
Dati:


APP N° 753

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Wire counting on wire winding machines
The number of wires on a wire winding machine should be counted.
Scheda
Dati:


APP N° 752

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of the presence of oil on rivet screws
The presence of oil on rivet screws should be detected.


APP N° 751

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Oil film detection on metal pins
An oil film on metal pins should be detected.
Scheda
Dati:


APP N° 750

Textile Industry (Textilindustrie)   
Param.:
Color measurement of dyed yellow cotton strands
The color of cotton strands should be measured during the tinting process.
Scheda
Dati:


APP N° 749

Textile Industry (Textilindustrie)   
Param.:
INI:
Color separation of recycled textiles
During the recycling process textiles should be color separated.
Scheda
Dati:


APP N° 748

Automotive Industry (Automobilindustrie)   
Param.:
Color differentiation of plastic interior components
Plastic interior parts should be differentiated.
Scheda
Dati:


APP N° 747

Automotive Industry (Automobilindustrie)   
Differentiation of leather and leather imitation interior components
Leather interior components should be differentiated from plastic interior parts.
Scheda
Dati:


APP N° 746

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color measurement of plastic plates with different structures
The color of plastic plates with a fine, middle and coarse surface should be measured.
Scheda
Dati:


APP N° 745

Textile Industry (Textilindustrie)   
Param.:
Color measurement of polyester thread
The color of polyester thread should be measured.
Scheda
Dati:


APP N° 744

Textile Industry (Textilindustrie)   
Param.:
Color measurement of polyester mesh
The color of polyester mesh should be measured.
Scheda
Dati:


APP N° 743

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Frequency measurement of rotating fans
The frequency of rotating blowers should be measured.
Scheda
Dati:


APP N° 742

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Color mark detection on saw blades
Color marks should be detected on saw blades.
Scheda
Dati:


APP N° 741

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Color mark detection on metal screws
The color mark on metal screws should be detected.
Scheda
Dati:


APP N° 740

Synthetic Industry (Kunststoffindustrie)   
Param.:
Backside/frontside differentiation of synthetic parts
The backside should be differentiated from the frontside of flat synthetic components.
Scheda
Dati:


APP N° 739

Synthetic Industry (Kunststoffindustrie)   
Param.:
Frontside and backside differentiation of a plastic part
The frontside of a flat plastic part should be differentiated from the backside.
Scheda
Dati:


APP N° 738

Packaging Industry (Verpackungsindustrie)   
Param.:
Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.
Scheda
Dati:


APP N° 737

Packaging Industry (Verpackungsindustrie)   
Param.:
Welding line detection of tin cans
The welding line on tin cans should be detected.
Scheda
Dati:


APP N° 736

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Differentiation of silver-colored screws from black coated screws
Silver-colored screws should be differentiated from black coated screws.
Scheda
Dati:


APP N° 735

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color mark detection on slide bearings
The color mark on slide bearings should be detected.
Scheda
Dati:


APP N° 734

Automotive Industry (Automobilindustrie)   
Param.:
Differentiation of leather from PVC interior components
Leather interior parts should be differentiated from PVC components.
Scheda
Dati:


APP N° 733

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Inner diameter measurement of metal components
The inner diameter of metal components should be measured.
Scheda
Dati:


APP N° 732

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of a gap between vinyl layers
A gap between vinyl layers should be detected.
Scheda
Dati:


APP N° 731

Glass Industry (Glasindustrie)   
Differentiation of tin and air side of float glasses
The tin side should be differentiated from the air side of float glasses.
Scheda
Dati:


APP N° 730

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Textile Industry (Textilindustrie)   
Fiber density control of fiber sheets
The density of fiber sheets should be controlled.
Scheda
Dati:


APP N° 729

Automotive Industry (Automobilindustrie)   
Counting of folds on oil and air filter mats
Folds of oil and air filter mats should be detected.
Scheda
Dati:


APP N° 728

Packaging Industry (Verpackungsindustrie)   
Param.:
Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.
Scheda
Dati:


APP N° 727

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Synthetic Industry (Kunststoffindustrie)   
Thickness measurement of thermal insulation panels
The thickness of thermal insulation panels should be measured INLINE.
Scheda
Dati:


APP N° 726

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal spring height control
The height of metal springs should be measured.
Scheda
Dati:


APP N° 725

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Thickness measurement of flat gaskets
The thickness of flat gaskets should be measured.
Scheda
Dati:


APP N° 724

Synthetic Industry (Kunststoffindustrie)   
Differentiation of yellowish cast to bluish shade clear transparent plastic components
Clear bluish transparent plastic components should be differentiated from yellowish parts.
Scheda
Dati:


APP N° 723

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color differentiation of clear transparent plastic parts
A yellowish cast to a bluish shade of transparent clear plastic components should be detected.
Scheda
Dati:


APP N° 722

Synthetic Industry (Kunststoffindustrie)   
Param.:
Differentiation of bluish and yellowish colored plastic parts
Blueish colored plastic parts should be differentiated from yellowish colored plastic components.
Scheda
Dati:


APP N° 721

Automotive Industry (Automobilindustrie)   
Param.:
Differentiation of shiny and matt automotive interior components
Matt and shiny interior components should be differentiated.
Scheda
Dati:


APP N° 720

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Color mark detection on wood plates
Color marks on wood plates should be detected. It should be noted that the color marks are black, green or red lines with a width of around 2mm.
Scheda
Dati:


APP N° 719

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Surface control of stainless-steel sheets
The surface of stainless-steel sheets should be controlled.
Scheda
Dati:


APP N° 718

Textile Industry (Textilindustrie)   
Glue detection on carpet backing
The presence of glue should be controlled on carpet backing.
Scheda
Dati:


APP N° 717

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.
Scheda
Dati:


APP N° 716

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Counting of transparent plastic lids
Transparent plastic lids should be counted.
Scheda
Dati:


APP N° 715

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.
Scheda
Dati:


APP N° 714

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Single paper sheet counting
Single sheets imbricated and transported on a conveyor belt should be counted.
Scheda
Dati:


APP N° 713

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.
Scheda
Dati:


APP N° 712

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.
Scheda
Dati:


APP N° 711

Chemical Industry (Chemische Industrie)   
Param.:
Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
Scheda
Dati:


APP N° 710

Packaging Industry (Verpackungsindustrie)   
Counting of stacked plastic lids
Stacked plastic lids should be counted.


APP N° 709

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Backside–frontside color differentiation of leather interior components
Leather interior components should be color differentiated related to the backside–frontside.
Scheda
Dati:


APP N° 708

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of painted plastic components
Lacquered plastic components should be color differentiated.
Scheda
Dati:


APP N° 707

Automotive Industry (Automobilindustrie)   
Param.:
Color differentiation of lacquered plastic components
Painted onyx-black components should be differentiated from lacquered black components.
Scheda
Dati:


APP N° 706

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Color differentiation of different types of coffee
Different types of coffee should be distinguished by color.
Scheda
Dati:


APP N° 705

Textile Industry (Textilindustrie)   
Differentiation of white paper and white synthetic cotton
White paper should be differentiated from white synthetic cotton.
Scheda
Dati:


APP N° 704

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a laser-engraved mark on a stainless-steel rod
Laser-engraved marks on stainless steel rods should be detected.
Scheda
Dati:


APP N° 703

Automotive Industry (Automobilindustrie)   
Position and angle control of washer jets
The position and angle of washer jets should be controlled. High-end washer jets provide normally two near-collimated water jets with a rigid angle and a fan beam with a wide angle. The task of the measuring instrument is furthermore to control the opening angle of the fan beam as well as the amount of water in the near-collimated water jets.
Scheda
Dati:


APP N° 702

Packaging Industry (Verpackungsindustrie)   
Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.
Scheda
Dati:


APP N° 701

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Laser welding process control
During the laser welding the color as well as the intensity of the emitted light, caused by the laser welding, should be controlled.
Scheda
Dati:


APP N° 700

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
Color measurement of anodized aluminum parts
The color of anodized aluminum parts should be measured.
Scheda
Dati:


APP N° 699

Synthetic Industry (Kunststoffindustrie)   
UVA transmittance of plastic plates
The UVA transmittance of plastic plates should be measured.
Scheda
Dati:


APP N° 698

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Distance measurement to insulation panels
The distance to insulation panels should be measured.
Scheda
Dati:


APP N° 697

Automotive Industry (Automobilindustrie)   
Distance measurement of plastic side windows
The distance to plastic side windows should be measured.
Scheda
Dati:


APP N° 696

Automotive Industry (Automobilindustrie)   
Color differentiation of black and brown interieur plastic components
Black and brown interior plastic parts should be color differentiated.
Scheda
Dati:


APP N° 695

Automotive Industry (Automobilindustrie)   
Param.:
Gloss measurement of leather imitations
The gloss of leather interior imitations should be measured.
Scheda
Dati:


APP N° 694

Textile Industry (Textilindustrie)   
Param.:
INI:
Fluorescence color control of yarn bobbins
The fluorescence color of yarn bobbins should be controlled.
Scheda
Dati:


APP N° 693

Agriculture (Agrarwirtschaft)   
Param.:
INI:
Orientation control of maize kernels
During the corn handling, the orientation of maize kernels should be controlled.
Scheda
Dati:


APP N° 692

Packaging Industry (Verpackungsindustrie)   
Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.
Scheda
Dati:


APP N° 691

Packaging Industry (Verpackungsindustrie)   
Param.:
Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.
Scheda
Dati:


APP N° 690

Packaging Industry (Verpackungsindustrie)   
Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.
Scheda
Dati:


APP N° 689

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of plastic automotive components
Lacquered automotive plastic components should be color differentiated.
Scheda
Dati:


APP N° 688

Packaging Industry (Verpackungsindustrie)   
Splice inspection of cigarette filters
The splices of cigarettes should be controlled.
Scheda
Dati:


APP N° 687

Packaging Industry (Verpackungsindustrie)   
Presence control of transparent labels
The presence of transparent labels should be controlled.
Scheda
Dati:


APP N° 686

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Environmental Technology (Umwelttechnik)   
Param.:
INI:
Color separation of metal parts
Metal parts should be separated depending on the color.
Scheda
Dati:


APP N° 685

Packaging Industry (Verpackungsindustrie)   
Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.
Scheda
Dati:


APP N° 684

Synthetic Industry (Kunststoffindustrie)   
Color control of deep blue plastic covers
The color of blue plastic covers should be controlled, whether the respective cover is inside the tolerance range or not.
Scheda
Dati:


APP N° 683

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
INI:
Detection of overlapped metal plates on metal fans and further whether the metal plates are welded
The presence of welding lines should be controlled on metal fans. Furthermore, it should be controlled, whether the overlapped metal plates are welded or not welded.
Scheda
Dati:


APP N° 682

Synthetic Industry (Kunststoffindustrie)   
Differentiation of coated and uncoated plastic film
An uncoated plastic film should be distinguished from a coated plastic film.
Scheda
Dati:


APP N° 681

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Color and intensity control of filament lamps
The color as well as the intensity of filaments lamps should be controlled.
Scheda
Dati:


APP N° 680

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Differentiation of black finished metal rod and metal rod
Black bronzed metal rods should be distinguished from metal rods.
Scheda
Dati:


APP N° 679

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
Scheda
Dati:


APP N° 678

Automotive Industry (Automobilindustrie)   
Param.:
Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
Scheda
Dati:


APP N° 677

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of shiny interior trims
Shiny interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
Scheda
Dati:


APP N° 676

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of matt interior trims
Matt interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
Scheda
Dati:


APP N° 675

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of loudspeaker covers
Loudspeaker covers should be color differentiated.


APP N° 674

Packaging Industry (Verpackungsindustrie)   
INI:
Counting of metal lids
Metal lids should be counted in a stack.
Scheda
Dati:


APP N° 673

Chemical Industry (Chemische Industrie)   
Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.
Scheda
Dati:


APP N° 672

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.
Scheda
Dati:


APP N° 671

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
Backside-, frontside detection of carpets
The backside from a carpet should be differentiated from the frontside.
Scheda
Dati:


APP N° 670

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.
Scheda
Dati:


APP N° 669

Packaging Industry (Verpackungsindustrie)   
Param.:
Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.


APP N° 668

Automotive Industry (Automobilindustrie)   
Param.:
Color-fluorescence differentiation of interior automotive components
Interior automotive parts should be color differentiated.
Scheda
Dati:


APP N° 667

Automotive Industry (Automobilindustrie)   
Param.:
Color differentiation of leather interior components
Leather interior parts used in the automotive area should be color differentiated.
Scheda
Dati:


APP N° 666

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Frontside / backside detection of black laminated paper sheets
The correct direction of black laminated paper sheets should be detected. It should be noted, that the frontside is slightly marked with a rectangular pattern.
Scheda
Dati:


APP N° 665

Glass Industry (Glasindustrie)   
Relief detection on glass bottles
Reliefs on different glass bottles should be detected.
Scheda
Dati:


APP N° 664

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Gear differentiation
Chemically non-treated gears should be distinguished from blackened gears.
Scheda
Dati:


APP N° 663

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Fluorescent print presence control
The presence of a fluorescent print on plastic film should be controlled.
Scheda
Dati:


APP N° 662

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.
Scheda
Dati:


APP N° 661

Automotive Industry (Automobilindustrie)   
Graphite fabric thickness measurement
The thickness of a graphite fabric should be measured.
Scheda
Dati:


APP N° 660

Automotive Industry (Automobilindustrie)   
Param.:
Welding line detection on stainless steel tubes
The welding line on stainless-steel tubes should be detected. At this, the stainless-steel tube is rotating.
Scheda
Dati:


APP N° 659

Automotive Industry (Automobilindustrie)   
Detection of different primers
Different, fluorescent primers should be detected. Here, the primers will be applied on a black surface.
Scheda
Dati:


APP N° 658

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Oil film detection on metal stamping stripes
The presence of an oil film on metal stripes should be detected. Especially after the cleaning process remaining residues of lubricants must be recognized.
Scheda
Dati:


APP N° 657

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.
Scheda
Dati:


APP N° 656

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.
Scheda
Dati:


APP N° 655

Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Thickness control of a transparent adhesive layer on a UV fluorescent transparent plastic film
The thickness of a transparent glue on a transparent but fluorescent plastic film should be measured.
Scheda
Dati:


APP N° 654

Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Detection of fluorescent coating on black leather
A gap with a width of 5mm in the fluorescent coating on a black leather surface should be detected.
Scheda
Dati:


APP N° 653

Provisions Industry (Lebensmittelindustrie)   
Evaluation of the quality of leaves
The quality of leaves should be evaluated in using the fluorescent effect.
Scheda
Dati:


APP N° 652

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
Glue bead presence control on plastic components
The presence of adhesive on black plastic parts should be controlled.
Scheda
Dati:


APP N° 651

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Presence control of a primer layer on a plastic component
A primer layer on a plastic surface should be detected.
Scheda
Dati:


APP N° 650

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Correct positioning control of welded flat metal tubes
The position of a welding line on a flat tube should be controlled. At this, the welding line should be underneath.
Scheda
Dati:


APP N° 649

Automotive Industry (Automobilindustrie)   
Color control of automotive paints
Automotive paints should be color differentiated. At this, the correct parts should be separated from the incorrect parts.
Scheda
Dati:


APP N° 648

Automotive Industry (Automobilindustrie)   
Param.:
Color measurement of car paints
The color of car paints should be measured and controlled whether the respective color is inside a certain dE tolerance to the corresponding reference.
Scheda
Dati:


APP N° 647

Glass Industry (Glasindustrie)   
Param.:
INI:
Color measurement of glass plates
The color of glass plates should be measured. It should be noted, that the colored opaque glass layer is covered from a transparent shiny glass layer and the color should be measured through the transparent glass layer. The challenge is, to avoid that the direct reflection from the surface of the transparent glass layer is influencing the color measurement result.
Scheda
Dati:


APP N° 646

Packaging Industry (Verpackungsindustrie)   
Param.:
Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.
Scheda
Dati:


APP N° 645

Packaging Industry (Verpackungsindustrie)   
Param.:
Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.


APP N° 644

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of automotive interior components
Automotive interior components should be differentiated.
Scheda
Dati:


APP N° 643

Synthetic Industry (Kunststoffindustrie)   
Knot detection on plastic straps
Knots in plastic straps should be inline detected.
Scheda
Dati:


APP N° 642

Automotive Industry (Automobilindustrie)   
Coating control on glass plates
The different coatings on glass plates should be color controlled.
Scheda
Dati:


APP N° 641

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Inline-control of welding line on stainless steel tubes
A welding line should be inline controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
Scheda
Dati:


APP N° 640

Automotive Industry (Automobilindustrie)   
Param.:
Welding line control on stainless steel tubes
A welding line should be controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
Scheda
Dati:


APP N° 639

Automotive Industry (Automobilindustrie)   
Param.:
Welding line detection on stainless steel tubes
A welding line should be detected on stainless steel tubes. At this, the tube can be turned.


APP N° 638

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Color control of trims
Trims should be color controlled.


APP N° 637

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of fabric and alcantara interior components
Fabric and alcantara interior components should be differentiated.
Scheda
Dati:


APP N° 636

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of rearview mirror housings
Rearview mirror housings should be color differentiated.
Scheda
Dati:


APP N° 635

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Direction control of plastic caps
The direction (upside or upside down) of plastic caps should be controlled.


APP N° 634

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Glue line control on printed paper
The presence, amount and gaps of a glue line on printed paper should be detected.
Scheda
Dati:


APP N° 633

Environmental Technology (Umwelttechnik)   
Param.:
INI:
Soot quantity measurement on filter paper
The amount of soot on filter paper should be measured.
Scheda
Dati:


APP N° 632

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Color differentiation of anodized aluminum tubes
Anodized aluminum tubes should be color differentiated.
Scheda
Dati:


APP N° 631

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Color differentiation of anodized aluminum profiles
Anodized aluminum profiles should be color differentiated.
Scheda
Dati:


APP N° 630

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color differentiation of anodized aluminum components
Anodized aluminum components should be color differentiated.
Scheda
Dati:


APP N° 629

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Front side – backside differentiation of paper web
The backside of yellow and white paper web should be differentiated from the respective front side.
Scheda
Dati:


APP N° 628

Packaging Industry (Verpackungsindustrie)   
Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.
Scheda
Dati:


APP N° 627

Automotive Industry (Automobilindustrie)   
Color differentiation between white and metallic white lacquered parts
White painted parts should be differentiated from metallic white lacquered components.


APP N° 626

Chemical Industry (Chemische Industrie)   
Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
Scheda
Dati:


APP N° 625

Packaging Industry (Verpackungsindustrie)   
Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.
Scheda
Dati:


APP N° 624

Automotive Industry (Automobilindustrie)   
Color Differentiation of interior components
Automotive interior components should be color differentiated at a big distance.
Scheda
Dati:


APP N° 623

Synthetic Industry (Kunststoffindustrie)   
Gap detection of fluorescent coating on plastic band
A gap inside fluorescent coating on a plastic ribbon should be detected.
Scheda
Dati:


APP N° 622

Textile Industry (Textilindustrie)   
Fluorescent thread detection on carpets
A fluorescent seam should be detected on carpet.
Scheda
Dati:


APP N° 621

Automotive Industry (Automobilindustrie)   
Differentiation of wooden and carbon based interior components
Wooden and carbon based interior components should be differentiated.
Scheda
Dati:


APP N° 620

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color control of stainless steel tubes
Blue painted stainless steel tubes should be differentiated from uncolored tubes.
Scheda
Dati:


APP N° 619

Textile Industry (Textilindustrie)   
Color measurement of fabrics
Green and olive fabrics should be color controlled.
Scheda
Dati:


APP N° 618

Automotive Industry (Automobilindustrie)   
Color differentiation of threads through shiny transparent plastic film
Components with different colored threads should be differentiated.


APP N° 617

Synthetic Industry (Kunststoffindustrie)   
Param.:
Moisture control of plastic pellets
The very low water content of plastic pellets should be measured.
Scheda
Dati:


APP N° 616

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color differentiation of metal springs
Metal springs should be color differentiated at a distance of 100mm.
Scheda
Dati:


APP N° 615

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of interior automotive components
Interior components should be color differentiated.


APP N° 614

Automotive Industry (Automobilindustrie)   
Differentiation of leather and leather imitation interior parts
Leather interior parts should be differentiated from leather imitation interior components.
Scheda
Dati:


APP N° 613

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Distance measurement to colored car glass
The distance to colored car glass should be measured. It has to be taken into account, that due to the fact, that several measuring points at the glass surface are necessary, the space for the respective measurement device, especially the frontend is limited.
Scheda
Dati:


APP N° 612

Automotive Industry (Automobilindustrie)   
Investigation of lacquered components in regards to gloss and haze
Lacquered components should be controlled in regards to gloss and haze.
Scheda
Dati:


APP N° 611

Synthetic Industry (Kunststoffindustrie)   
Color measurement of two different colored transparent Plexiglas sheets
A slightly blueish and a slightly yellowish colored transparent acrylic glass sheet should be color measured.
Scheda
Dati:


APP N° 610

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Color measurement of copper coated wires
The color of copper anodized wires should be measured.
Scheda
Dati:


APP N° 609

Synthetic Industry (Kunststoffindustrie)   
Param.:
Glue line edge tracing on transparent plastic film
The edge of a glue line on a transparent plastic film should be detected.
Scheda
Dati:


APP N° 608

Automotive Industry (Automobilindustrie)   
Param.:
Color differentiation of automotive loudspeaker housings
The color of automotive loudspeaker housings should be controlled.
Scheda
Dati:


APP N° 607

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Continuous edge pursuit on embossed paper
The edge on embossed paper should be traced.
Scheda
Dati:


APP N° 606

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
Scheda
Dati:


APP N° 605

Textile Industry (Textilindustrie)   
Param.:
Color measurement of red-black patterned fabrics
The color of red-black patterned fabrics should be measured.
Scheda
Dati:


APP N° 604

Textile Industry (Textilindustrie)   
Param.:
Color measurement of gray-blue fabrics
The color of gray-blue fabrics should be measured.
Scheda
Dati:


APP N° 603

Textile Industry (Textilindustrie)   
Param.:
Color measurement of orange fabrics
The color of orange – black patterned textiles should be measured.
Scheda
Dati:


APP N° 602

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color measurement of plastic parts
The color of plastic parts should be measured.
Scheda
Dati:


APP N° 601

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Differentiation of diverse hazy metal parts
Diverse hazy metal components should be differentiated.
Scheda
Dati:


APP N° 600

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color measurement of transparent plastic pellets
Transparent plastic pellets should be color controlled and especially the yellowing should be detected.
Scheda
Dati:


APP N° 599

Synthetic Industry (Kunststoffindustrie)   
Param.:
Presence control of a transparent plastic film
The presence of a transparent edge strip should be controlled.
Scheda
Dati:


APP N° 598

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Color control of flames
The color of a flame should be controlled.
Scheda
Dati:


APP N° 597

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Black line detection on white background at a big distance
A black line on a white background should be detected at a big distance.
Scheda
Dati:


APP N° 596

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of matt and shiny metal parts
Matt metal components should be differentiated from shiny metal parts.
Scheda
Dati:


APP N° 595

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Differentiation of front side and backside of canvas
The front side of canvas should be differentiated from the backside.


APP N° 594

Packaging Industry (Verpackungsindustrie)   
Param.:
Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.
Scheda
Dati:


APP N° 593

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of automotive interior parts
Automotive components used in the interior field should be color differentiated.


APP N° 592

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Moisture control of wood pellets
The moisture of wood pellets should be controlled.
Scheda
Dati:


APP N° 591

Provisions Industry (Lebensmittelindustrie)   
Param.:
Moisture control of lentils
The moisture of lentils should be controlled.
Scheda
Dati:


APP N° 590

Provisions Industry (Lebensmittelindustrie)   
Param.:
Moisture control of grinded nuts
The moisture of grinded nuts should be controlled.
Scheda
Dati:


APP N° 589

Provisions Industry (Lebensmittelindustrie)   
Param.:
Moisture control of wheat
The moisture of wheat should be controlled.
Scheda
Dati:


APP N° 588

Provisions Industry (Lebensmittelindustrie)   
Param.:
Moisture control of rice
The moisture of rice should be controlled.


APP N° 587

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Moisture control of bricks
The moisture of bricks should be controlled.


APP N° 586

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Moisture control of clinker bricks
The moisture of clinker bricks should be controlled.


APP N° 585

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Moisture control of concrete blocks
The moisture of concrete blocks should be controlled.


APP N° 584

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Moisture of gas concrete
The moisture of gas concrete should be controlled.


APP N° 583

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Moisture control of paper
The moisture of paper should be controlled.


APP N° 582

Textile Industry (Textilindustrie)   
Param.:
Moisture control of fabrics
The moisture of textiles should be controlled.


APP N° 581

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Moisture control of timber
The moisture of timber should be controlled.
Scheda
Dati:


APP N° 580

Synthetic Industry (Kunststoffindustrie)   
Param.:
Edge detection on plastic cups
The rims of stacked plastic cups should be detected.
Scheda
Dati:


APP N° 579

Glass Industry (Glasindustrie)   
Param.:
Defect detection on glass plates
Defects, like scratches and splintering of cutting edges on glass discs should be detected.
Scheda
Dati:


APP N° 578

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Car finish color control
Car finish colors should be controlled.
Scheda
Dati:


APP N° 577

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Adhesive layer presence detection on paper web
The presence of an adhesive layer on paper web should be controlled.
Scheda
Dati:


APP N° 576

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Watermark detection on safety paper
Water reference marks should be detected on safety paper.
Scheda
Dati:


APP N° 575

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Color differentiation of metal rings
Metal rings should be color differentiated.
Scheda
Dati:


APP N° 574

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.
Scheda
Dati:


APP N° 573

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Overlap joint detection on perforated metal tubes
The overlapping area on perforated metal tubes should be detected.
Scheda
Dati:


APP N° 572

Packaging Industry (Verpackungsindustrie)   
Param.:
Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.
Scheda
Dati:


APP N° 571

Packaging Industry (Verpackungsindustrie)   
Param.:
Cigarette filter differentiation
Cigarette filter segments should be differentiated.
Scheda
Dati:


APP N° 570

Packaging Industry (Verpackungsindustrie)   
Param.:
Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.
Scheda
Dati:


APP N° 569

Glass Industry (Glasindustrie)   
Param.:
Bottle neck height control
The height of the bottle neck should be measured.
Scheda
Dati:


APP N° 568

Glass Industry (Glasindustrie)   
Param.:
Glass bottle positioning
Glass bottles should be positioned.
Scheda
Dati:


APP N° 567

Glass Industry (Glasindustrie)   
Param.:
INI:
Color differentiation of flat glasses
Flat glasses should be color differentiated.
Scheda
Dati:


APP N° 566

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Inner tube welding line detection
The welding line of an inner tube should be detected during rotation.
Scheda
Dati:


APP N° 565

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic automotive interior components
Automotive interior plastic parts should be color differentiated.
Scheda
Dati:


APP N° 564

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Joint sealing color control on fiber boards
The color as well as the presence of the joint sealing of fiber boards should be detected.
Scheda
Dati:


APP N° 563

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Color control of roasted onions
Roasted unions should be color controlled.
Scheda
Dati:


APP N° 562

Packaging Industry (Verpackungsindustrie)   
Param.:
Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.
Scheda
Dati:


APP N° 561

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color measurement of plastic components
Plastic components should be color measured


APP N° 560

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Synthetic Industry (Kunststoffindustrie)   
Param.:
Detection of an UVC absorbing coating on transparent plastic film
UVC absorbing coating should be detected on transparent plastic films.
Scheda
Dati:


APP N° 559

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Presence control of fluorescent coating
The presence of a fluorescent coating on rubber seal should be controlled.
Scheda
Dati:


APP N° 558

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
Scheda
Dati:


APP N° 557

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of black leather, leather imitation and alcantara components
Black leather interior components should be distinguished from black leather imitation as well as alcantara material.
Scheda
Dati:


APP N° 556

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
Color differentiation of threads
Different colored threads, used for sewing leather together, should be controlled on sewing machines.
Scheda
Dati:


APP N° 555

Automotive Industry (Automobilindustrie)   
Distance measurement on carbon fiber plates
The distance to carbon fiber plates should be measured.
Scheda
Dati:


APP N° 554

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of shiny plastic parts
Shiny plastic components, used for the interior automotive field, should be color differentiated.
Scheda
Dati:


APP N° 553

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of matt plastic interior components
Matt plastic parts, used for the automotive interior field, should be color differentiated.
Scheda
Dati:


APP N° 552

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of beige interior plastic parts
Beige plastic parts, which are used in the automotive interior field, should be color differentiated.
Scheda
Dati:


APP N° 551

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Lacquer surface weight control
The lacquer surface weight on furniture plates should be controlled. Investigations have shown that there is a proportional relation between the color space siM - parameters of the liquid paint on the pressing roll and the surface weight of the lacquer on the panel. However, the proportionality factor is dependent of the color and has to be calibrated for the respective paint.
Scheda
Dati:


APP N° 550

Automotive Industry (Automobilindustrie)   
Distance measurement to black rubber band
The distance to a black rubber band should be measured. It has to be taken into account, that the surface of the rubber band can change from black matt to black shiny.
Scheda
Dati:


APP N° 549

Synthetic Industry (Kunststoffindustrie)   
Param.:
Gloss measurement of transparent plastic films
The gloss factor of different transparent plastic films should be measured on both sides.
Scheda
Dati:


APP N° 548

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Ball joint coating control
The joint ball surface should be controlled with a view to the coating. At this, uncoated joint balls should be differentiated from coated and blue coated joint balls.
Scheda
Dati:


APP N° 547

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
Scheda
Dati:


APP N° 546

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Differentiation of High Density Fiberboards (HDF-boards)
Treated High Density Fiberboards should be differentiated. At this, one board is wood sanded, the 2nd board is wood sanded with first sealer and the 3rd board is wood sanded with first sealer and lacquer sanded.
Scheda
Dati:


APP N° 545

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of the inner surface of plastic tubes
The inner surface of plastic tubes should be controlled.
Scheda
Dati:


APP N° 544

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Lacquered door handle color control
The color of varnished door handles should be controlled.
Scheda
Dati:


APP N° 543

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of painted plastic components
Plastic parts should be color differentiated. For this purpose, a color sensor type SPECTRO-3-100-COF-d6.0-CL is used.
Scheda
Dati:


APP N° 542

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of metalized door handles
Metalized door handles should be color differentiated.
Scheda
Dati:


APP N° 541

Glass Industry (Glasindustrie)   
Optical transmission control of different glass plates
The transmission of different glass plates should be controlled.
Scheda
Dati:


APP N° 540

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Haze control of stainless steel plates
The haze of stainless steel surfaces should be controlled.
Scheda
Dati:


APP N° 539

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Presence control of liquid fluorescent glue in a hole
The presence of fluorescent liquid glue in a hole should be controlled.
Scheda
Dati:


APP N° 538

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Control of the contact surface of gear wheels
The contact surface of gear wheels should be controlled.
Scheda
Dati:


APP N° 537

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of interior plastic parts
Plastic parts, which are used in the automotive interior field, should be color differentiated
Scheda
Dati:


APP N° 536

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Detection of silicone oil film on plastic components
The presence of silicon oil should be controlled on the surface of plastic components.
Scheda
Dati:


APP N° 535

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Color mark control on syringes
The color of the mark on syringes should be controlled.
Scheda
Dati:


APP N° 534

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Differentiation of metal chain links
Metal chain links should be differentiated by thickness. The thickness of the one size is 2.0mm, whereas the other size has a thickness of 2.3mm.
Scheda
Dati:


APP N° 533

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Detection of chatter marks on metal bands
Defects inside bimetallic bands will be marked with chatter marks. These chatter marks should be proper detected during the further processing and the damaged part of the metal stripes should be removed from the finishing later on


APP N° 532

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of automotive interior parts
Interior parts used in the automotive industry should be differentiated
Scheda
Dati:


APP N° 531

Synthetic Industry (Kunststoffindustrie)   
Param.:
Detection of holographical reference marks
Holographic reference marks should be detected. There are red as well as green reflecting reference marks which should be detected with the same adjustment.
Scheda
Dati:


APP N° 530

Automotive Industry (Automobilindustrie)   
Param.:
Seam color detection on leather automotive interior components
The color of the seam on leather components should be controlled
Scheda
Dati:


APP N° 529

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Inline color measurement of paper web
The color of a paper web should be measured inline. It has to be taken into account, that the ambient temperature as well as the humidity is very high at the place where the paper web should be color measured.
Scheda
Dati:


APP N° 528

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of safety seat belts
Seat belts should be color controlled and differentiated.
Scheda
Dati:


APP N° 527

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Gloss differentiation of coated flagstones from uncoated flagstones
Coated flagstones should be differentiated from uncoated flagstones.
Scheda
Dati:


APP N° 526

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of leather imitations
Leather imitations in the interior automotive field should be color differentiated.
Scheda
Dati:


APP N° 525

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of loudspeaker grids
The color of loudspeaker grids should be differentiated.
Scheda
Dati:


APP N° 524

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color-gloss differentiation of black interior parts
Black leather imitation components from the automotive interior field should be differentiated from black fabric as well as from black plain plastic parts.
Scheda
Dati:


APP N° 523

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Differentiation of alcantara and fabric interior components
Different colored alcantara and fabric interior components for the automotive industry should be distinguished.
Scheda
Dati:


APP N° 522

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Color measurement of glazed tiles
The color of glazed tiles should be inline measured.
Scheda
Dati:


APP N° 521

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Gloss measurement of anodized guide rails
The gloss of anodized aluminum guide rails should be inline measured.
Scheda
Dati:


APP N° 520

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Color measurement of anodized aluminum stripes
The color of anodized aluminum stripes should be measured inline.
Scheda
Dati:


APP N° 519

Synthetic Industry (Kunststoffindustrie)   
Quality control of transparent plastic plates
Transparent plastic plates should be quality controlled. The parts with a high optical quality should be differentiated from components with optical aberration failures.
Scheda
Dati:


APP N° 518

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color measurement of recycled plastic pellets
The color of recycled plastic pellets should be measured. It has to be taken into account, that the position of the pellets behind the inspection glass can vary, thus a big light spot has a certain advantage to get a proper average measurement value. Furthermore, it should be considered, that the ambient temperature around the inspection glass can reach 120°C.
Scheda
Dati:


APP N° 517

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
Scheda
Dati:


APP N° 516

Textile Industry (Textilindustrie)   
Param.:
INI:
Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
Scheda
Dati:


APP N° 515

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Coating control at the front side of film capacitors
The double coating at the front side of film capacitors should be controlled.
Scheda
Dati:


APP N° 514

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Casting compound control at capacitor housings
The casting compound of capacitor housings should be controlled.
Scheda
Dati:


APP N° 513

Pharmacy (Pharmazie)   
Param.:
INI:
Color mark detection on a plastic cartridge
A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched.
Scheda
Dati:


APP N° 512

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Hole presence control on catheter tubes
The presence of holes on catheter tubes should be controlled.
Scheda
Dati:


APP N° 511

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Catheter dome presence control
The presence of a dome at the end of a catheter should be controlled.
Scheda
Dati:


APP N° 510

Synthetic Industry (Kunststoffindustrie)   
Gloss measurement of translucent plastic films
The gloss level of semi-transparent plastic films should be inline measured.
Scheda
Dati:


APP N° 509

Automotive Industry (Automobilindustrie)   
Color differentiation of flaps in cup holders
Black flaps should be color differentiated from dark brown flaps. During the tests the flaps are already integrated into the cup holder.
Scheda
Dati:


APP N° 508

Automotive Industry (Automobilindustrie)   
Notch presence detection on a shock absorber
A notch on a metal shock absorber should be detected. It has to be taken into account, that the notch is very shiny.
Scheda
Dati:


APP N° 507

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color and structure differentiation of automotive interior components
In practice, a proper color-gloss differentiation between most of the interior components can be realized, however, it has to be taken into account, that the difference in gloss as well as in color between the fabrics and the alcantara components is small, thus the structure difference should be used to differentiate even those products.
Scheda
Dati:


APP N° 506

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of painted plastic components
Painted plastic components used for the interior automotive area should be color differentiated.
Scheda
Dati:


APP N° 505

Glass Industry (Glasindustrie)   
Param.:
INI:
Presence control of a laser engraving on a glass bottle
The presence as well as the intensity of a laser engraving on glass bottles should be controlled.
Scheda
Dati:


APP N° 504

Synthetic Industry (Kunststoffindustrie)   
Param.:
Wall thickness control of semitransparent plastic components
The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts.
Scheda
Dati:


APP N° 503

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Stone plate thickness control
The thickness of stone plates should be measured. At this, the stone plates will be transported on a conveyor belt with a negligible movement in height, thus it can be used as a reference.
Scheda
Dati:


APP N° 502

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Presence control of a semitransparent plastic film on a metal sheet
A semitransparent light blue plastic film should be detected on a metal sheet.
Scheda
Dati:


APP N° 501

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of half shells of bush bearings
Half shells of friction-type bearings should be color differentiated.
Scheda
Dati:


APP N° 500

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Primer presence control on a black painted metal frame
The presence of a primer should be detected on a black painted metal frame.
Scheda
Dati:


APP N° 499

Automotive Industry (Automobilindustrie)   
Param.:
INI:
LED color control on interior components
The color as well as the intensity of LEDs, integrated in interior components, should be controlled. Furthermore, on components without LEDs the presence of a cover plate should be checked.
Scheda
Dati:


APP N° 498

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Color control of metal rings
The quality of metal rings should be controlled with a view to the color.
Scheda
Dati:


APP N° 497

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of metal loudspeaker grids
Two kinds of metal loudspeaker grids should be color differentiated.
Scheda
Dati:


APP N° 496

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Oil presence control on metal grids
The presence of oil should be detected on metal grids.
Scheda
Dati:


APP N° 495

Textile Industry (Textilindustrie)   
Gloss measurement on coated textiles
The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value.
Scheda
Dati:


APP N° 494

Textile Industry (Textilindustrie)   
Param.:
INI:
Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
Scheda
Dati:


APP N° 493

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Fluorescence detection on metal foils
The presence of fluorescence coating on a metal foil should be controlled.
Scheda
Dati:


APP N° 492

Glass Industry (Glasindustrie)   
Dot detection on glass bottles
Dots on glass bottles should be detected during the rotation.
Scheda
Dati:


APP N° 491

Synthetic Industry (Kunststoffindustrie)   
Param.:
Height measurement of a transparent plastic plate with embedded fabric
The height of transparent plastic plate with different embedded fabric should be measured.
Scheda
Dati:


APP N° 490

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Thickness measurement of polished slabs
The thickness of polished slabs should be measured. It should be noted, that the slabs are placed on a reference plate.
Scheda
Dati:


APP N° 489

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Gloss measurement on polished slabs
The gloss of polished slabs should be measured.
Scheda
Dati:


APP N° 488

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Color control of polished slabs
The color of polished slabs should be controlled.
Scheda
Dati:


APP N° 487

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color measurement of plastic pellets
The color of plastic pellets should be measured during the production.
Scheda
Dati:


APP N° 486

Textile Industry (Textilindustrie)   
Param.:
INI:
Color mark measurement on fabric
The L*a*b* values of color marks on different fabric should be determined.
Scheda
Dati:


APP N° 485

Textile Industry (Textilindustrie)   
Param.:
INI:
Winding control of yarn on a pirn
During the winding of yarn, the correct winding should be controlled.
Scheda
Dati:


APP N° 484

Automotive Industry (Automobilindustrie)   
Param.:
Particle size measurement in a spray jet
The size of particles in a spray jet should be measured.
Scheda
Dati:


APP N° 483

Automotive Industry (Automobilindustrie)   
Param.:
Spray jet control during the movement
The spray jet of a spray nozzle should be controlled during the movement.
Scheda
Dati:


APP N° 482

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Color measurement of lacquered metal sheets
The color of painted metal sheets should be measured (L*a*b* values).
Scheda
Dati:


APP N° 481

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Color differentiation of plastic pen housings
The color of plastic bushings should be controlled.
Scheda
Dati:


APP N° 480

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Direction control of metal pins
The direction of metal pins should be controlled.
Scheda
Dati:


APP N° 479

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of bright seat belt plastic housings
Bright seat belt plastic housings should be color differentiated.
Scheda
Dati:


APP N° 478

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of beige seat belt plastic housings
Beige colored seat belt plastic housings should be differentiated.
Scheda
Dati:


APP N° 477

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of dark seat belt plastic housings
Dark seat belt housings should be differentiated.
Scheda
Dati:


APP N° 476

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Color differentiation of plastic interior components for the automotive industry
Plastic components used for the automotive interior field should be color differentiated.
Scheda
Dati:


APP N° 475

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Differentiation of single and double inside coated aluminum tubes
Single inside coated aluminum tubes should be differentiated from double inside coated aluminum tubes.
Scheda
Dati:


APP N° 474

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Detection of fluorescent oil on flat washers
The presence of oil on different flat washers should be controlled. It has to be taken into account, that the oil is fluorescent, if UV light is used.
Scheda
Dati:


APP N° 473

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Detection of fluorescent lubricant on metal pins
Fluorescent lubricant should be detected on metal pins.
Scheda
Dati:


APP N° 472

Synthetic Industry (Kunststoffindustrie)   
Color differentiation of small plastic tubes
Small violet plastic tubes should be color differentiated.
Scheda
Dati:


APP N° 471

Synthetic Industry (Kunststoffindustrie)   
Param.:
Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
Scheda
Dati:


APP N° 470

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Roof tile color measurement
The color of roof tiles should be inline measured.
Scheda
Dati:


APP N° 469

Glass Industry (Glasindustrie)   
Detection of an UV blocking layer on transparent glass bottles
The presence of an UV blocking layer should be detected on transparent glass bottles.
Scheda
Dati:


APP N° 468

Automotive Industry (Automobilindustrie)   
Color differentiation of lacquered plastic components
Car finish should be color differentiated. A rotation around the perpendicular axis of the plastic components should not influence the result of the color control.
Scheda
Dati:


APP N° 467

Automotive Industry (Automobilindustrie)   
Color differentiation of car door handles
Car door handles should be color differentiated. It has to be taken into account, that the door handles are very shiny.
Scheda
Dati:


APP N° 466

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Presence control of a notch in a lobe of a metal stamping part
The presence of a notch in a lobe of a metal stamping part should be detected. Furthermore a semicircular notch must be differentiated from an elongated notch.
Scheda
Dati:


APP N° 465

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
Color measurement of the insulation of cables
The color of the insulation of electrical cables should be inline measured.
Scheda
Dati:


APP N° 464

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Spray jet amount control in the Ɛx range
The presence as well as the spray amount of a spray jet in the Ex range should be controlled. It has to be taken into account, that a system based on the transmitted light mode cannot be used for this application.
Scheda
Dati:


APP N° 463

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Oil presence control in metal screw nuts and screws
The presence and amount of oil in a screw nut as well as in a screw should be detected directly before border crimping.
Scheda
Dati:


APP N° 462

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.
Scheda
Dati:


APP N° 461

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
INI:
Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
Scheda
Dati:


APP N° 460

Textile Industry (Textilindustrie)   
Param.:
Edge position detection on fabric
The position of the changeover from rough to fine on a textile should be detected.
Scheda
Dati:


APP N° 459

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
Scheda
Dati:


APP N° 458

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
Scheda
Dati:


APP N° 457

Chemical Industry (Chemische Industrie)   
Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
Scheda
Dati:


APP N° 456

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Glue detection on the thread of a screw
The presence and amount of fluorescent (fluorescent under the influence of UV light) glue on the thread of a screw should be detected.
Scheda
Dati:


APP N° 455

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Seam detection on leather and leather imitations
Beige (black) stitching should be detected on beige (black) leather or leather imitations.
Scheda
Dati:


APP N° 454

Automotive Industry (Automobilindustrie)   
Differentiation of leather and leather imitations
Leather and leather imitations used in the interior field should be proper differentiated.
Scheda
Dati:


APP N° 453

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
INI:
Measurement of the length of gypsum plasterboard
The length of gypsum plasterboard should be measured.
Scheda
Dati:


APP N° 452

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Double ring control
The presence of one or two rings should be controlled.
Scheda
Dati:


APP N° 451

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Position monitoring of a rubber plug before the final positioning in a syringe
The position of a rubber plug should be controlled with regard to the outer face and inner surface.
Scheda
Dati:


APP N° 450

Glass Industry (Glasindustrie)   
Reflected light color control of coatings on glass plates
The coating of glass plates should be color controlled in the reflected light mode.
Scheda
Dati:


APP N° 449

Glass Industry (Glasindustrie)   
Transmitted light color control of coatings on glass plates
The coating of glass plates should be color controlled in the through beam way.
Scheda
Dati:


APP N° 448

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Detection of the welding line in the core retainer
The position of the welding line should be detected in inner pipes.
Scheda
Dati:


APP N° 447

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Color differentiation of plastic caps for syringes
Plastic caps used for syringes should be color controlled. It has to be taken into account, that the plastic caps are semitransparent and the surface is very glossy.
Scheda
Dati:


APP N° 446

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Spray jet control with reflected light
The spray jet should be controlled with reflected infrared light and in an Ɛx zone environment.
Scheda
Dati:


APP N° 445

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Color control of fried potato chips
The color of fried potato chips should be controlled.
Scheda
Dati:


APP N° 444

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
Scheda
Dati:


APP N° 443

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
Scheda
Dati:


APP N° 442

Lifestyle (Lifestyle)   
Param.:
INI:
Color control of nail polishes
The color of nail varnishes should be controlled. It has to be taken into account that the nail lacquers should be checked through transparent glass bottles.
Scheda
Dati:


APP N° 441

Lifestyle (Lifestyle)   
Param.:
Color differentiation of make-up
The color of make-up should be controlled.
Scheda
Dati:


APP N° 440

Lifestyle (Lifestyle)   
Param.:
INI:
Color differentiation of eye shadows
The color of eye shadows should be controlled.
Scheda
Dati:


APP N° 439

Lifestyle (Lifestyle)   
Param.:
INI:
Color differentiation of lipsticks
The color of lipsticks should be controlled.
Scheda
Dati:


APP N° 438

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Diameter control of metal wires
The diameter of metal wires should be controlled and the wires should be differentiated.
Scheda
Dati:


APP N° 437

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
Color differentiation of tin and silver plated stamping stripes
Tin plated stamping stripes should be distinguished from silver plated stamping stripes.
Scheda
Dati:


APP N° 436

Packaging Industry (Verpackungsindustrie)   
Param.:
Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.
Scheda
Dati:


APP N° 435

Synthetic Industry (Kunststoffindustrie)   
Thickness control of a thin layer on a transparent plastic film
The thickness of a thin layer on a transparent plastic film should be measured. To measure the transmission with a through beam system seems to be an adequate method to determine the thickness of a thin layer.
Scheda
Dati:


APP N° 434

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Haze control of semi transparent plastic plates
Semi transparent plastic plates should be controlled with a view to the opacity.
Scheda
Dati:


APP N° 433

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.
Scheda
Dati:


APP N° 432

Automotive Industry (Automobilindustrie)   
Param.:
Color differentiation of lacquered trims
Trim strips should be color differentiated. It has to be taken into account, that the lacquered trims are very shiny.
Scheda
Dati:


APP N° 431

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Quality control of cartridges
The quality of cartridges should be controlled. It has to be taken into account, that the reflectivity of the surface of the cartridges will be decreased with the increase of the usage of the cartridges.
Scheda
Dati:


APP N° 430

Lifestyle (Lifestyle)   
Color and opacity control of gemstones
The color as well as the opacity of gemstones should be controlled.
Scheda
Dati:


APP N° 429

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
INI:
Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
Scheda
Dati:


APP N° 428

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Differentiation of zinc plated steel parts and raw steel parts
Zinc plated steel turned parts should be differentiated from raw steel turned parts.
Scheda
Dati:


APP N° 427

Pharmacy (Pharmazie)   
Color and guidance control of capsules
The color as well as the orientation of capsules should be controlled during the production and just before packaging.
Scheda
Dati:


APP N° 426

Textile Industry (Textilindustrie)   
Detection of color on fabric
The color of different colored fabric should be inline controlled.
Scheda
Dati:


APP N° 425

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Presence control of an oil film on an aluminum surface
The presence of an oil film in aluminum housing should be controlled.
Scheda
Dati:


APP N° 424

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Oil drop presence control on a steel surface
The presence of an oil drop on a steel surface should be controlled.
Scheda
Dati:


APP N° 423

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Double membrane control on breaker plates
The presence of one or two diaphragms in a blow-out disk should be differentiated. At this, different types of burst disks are available (copper and aluminum) with different diaphragms (aluminum membrane or steel membrane).
Scheda
Dati:


APP N° 422

Pharmacy (Pharmazie)   
Presence control of a seal ring on a plastic component
The presence of a silicon ring on a plastic component should be controlled.
Scheda
Dati:


APP N° 421

Packaging Industry (Verpackungsindustrie)   
Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.
Scheda
Dati:


APP N° 420

Packaging Industry (Verpackungsindustrie)   
Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.
Scheda
Dati:


APP N° 419

Automotive Industry (Automobilindustrie)   
Differentiation Alcantara (Ultrasuede) and fabric interior equipment
Alcantara and fabric interior equipment should be differentiated.
Scheda
Dati:


APP N° 418

Synthetic Industry (Kunststoffindustrie)   
Differentiation of plastic pellets
Chemically and in terms of color different plastic pellets should be distinguished.
Scheda
Dati:


APP N° 417

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Pharmacy (Pharmazie)   
Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
Scheda
Dati:


APP N° 416

Textile Industry (Textilindustrie)   
Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
Scheda
Dati:


APP N° 415

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Direction control of a metal rod
The direction of a metal rot should be controlled. At this, the metal rod is flat press formed at the one side and at the other end round in shape.
Scheda
Dati:


APP N° 414

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Frequency control of industrial ventilators
The frequency as well as the direction of rotation of industrial ventilators should be controlled. At this, on one of the blades of the ventilator a fluorescent label is glued on.
Scheda
Dati:


APP N° 413

Environmental Technology (Umwelttechnik)   
Position monitoring of metal wires on a transparent plastic layer
The back side / front side position of metal wires on a transparent plastic film should be controlled.
Scheda
Dati:


APP N° 412

Automotive Industry (Automobilindustrie)   
Edge detection at bellows (fold counting)
On bellows the edges should be detected and counted.
Scheda
Dati:


APP N° 411

Automotive Industry (Automobilindustrie)   
Differentiation of pneumatic cylinders
Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis.
Scheda
Dati:


APP N° 410

Automotive Industry (Automobilindustrie)   
Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled. At this, one of the blades of the wheel is coated with a fluorescent transparent lacquer.
Scheda
Dati:


APP N° 409

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Gap detection on iron cores of electrical motors
The gaps on iron cores of electrical motors should be detected during the fast rotation.
Scheda
Dati:


APP N° 408

Automotive Industry (Automobilindustrie)   
Differentiation of black and dark gray leather imitation
Dark gray and black leather imitation should be distinguished.
Scheda
Dati:


APP N° 407

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Automotive Industry (Automobilindustrie)   
Detection of plastic residues on the start of metal thread
Plastic residues on the start of metal threads should be detected.
Scheda
Dati:


APP N° 406

Synthetic Industry (Kunststoffindustrie)   
Transparency control of white plastic plates
The transparency of white plastic plates should be controlled.
Scheda
Dati:


APP N° 405

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Presence control of an inside thread and a hole at a gear wheel
The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit.
Scheda
Dati:


APP N° 404

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Height measurement of a metal pin and of the teeth as well as the depth of a blind hole on a metal gear wheel
The height of a metal pin as well as the depth of a blind hole on a gear wheel should be controlled. Furthermore, the height of the teeth on the gear wheel should be measured.
Scheda
Dati:


APP N° 403

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Gap size measurement on an aluminum casting of a turbo charger
The gap size on the aluminum housing of a turbo charger should be measured.
Scheda
Dati:


APP N° 402

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Color control of cable jacket
The color of a cable jacket should be controlled.
Scheda
Dati:


APP N° 401

Automotive Industry (Automobilindustrie)   
Presence control of UV bond on a plastic component
The presence of an UV adhesive layer on the backside of a plastic part should be controlled. A false detection even from the front side of the plastic component must be avoided.
Scheda
Dati:


APP N° 400

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Thickness measurement of a bimetal band
The thickness of a bimetal band should be measured contactless during the movement.
Scheda
Dati:


APP N° 399

Synthetic Industry (Kunststoffindustrie)   
Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
Scheda
Dati:


APP N° 398

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Presence control of small metal plates on a copper contact
The presence of a small and thin metal plate should be detected.
Scheda
Dati:


APP N° 397

Synthetic Industry (Kunststoffindustrie)   
Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
Scheda
Dati:


APP N° 396

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Fluorescence control of water based cleaning systems
The amount of oil in an oil-water based emulsion should be controlled. Over time cleaning water used for water based cleaning machines is changing into an oil-water based emulsion with a steady increase of the content of oil.
Scheda
Dati:


APP N° 395

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Turbidity control of water based cleaning systems
The turbidity of cleaning water used for cleaning systems should be controlled. Over time, the cleaning water becomes more and more an oil-in-water emulsion mixed with dirt, grease and small metal swarf.
Scheda
Dati:


APP N° 394

Automotive Industry (Automobilindustrie)   
Detection of a fluorescent green and orange mark
Orange as well as a green fluorescent marks sprayed on a white fleece should be detected and distinguished.
Scheda
Dati:


APP N° 393

Automotive Industry (Automobilindustrie)   
Presence control of a Velcro® strip on rear shelf
The presence of a Velcro® strip on a hat shelf should be controlled.
Scheda
Dati:


APP N° 392

Packaging Industry (Verpackungsindustrie)   
Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.
Scheda
Dati:


APP N° 391

Textile Industry (Textilindustrie)   
Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
Scheda
Dati:


APP N° 390

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color control of plastic window profiles
Plastic profiles which are used for casement frames should be color controlled.
Scheda
Dati:


APP N° 389

Automotive Industry (Automobilindustrie)   
Color control of handles
Handles in the automotive field should be color controlled.
Scheda
Dati:


APP N° 388

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Wafer edge detection
The edges of wafers with a thickness of 80µm should be detected.
Scheda
Dati:


APP N° 387

Automotive Industry (Automobilindustrie)   
Color differentiation of leather imitations and fabrics in the interior area
Different dark and light leather imitations and fabrics should be differentiated. The colors of the different dark parts as well as of the light parts are very close, almost the same, but the structure of the respective surface is slightly different.
Scheda
Dati:


APP N° 386

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Vertical height control between a turned metal part and a press-bent part
The vertical height between a shiny turned metal part and a press-bent part should be measured immediately before welding.
Scheda
Dati:


APP N° 385

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Distance control of black rubber buffers
The distance of black rubber buffers should be controlled.
Scheda
Dati:


APP N° 384

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Detection of the edge of a stripped ribbon cable
The beginning of the laser stripped part of a ribbon cable should be precisely detected.
Scheda
Dati:


APP N° 383

Automotive Industry (Automobilindustrie)   
Color differentiation of ultrasonic sensors at a distance of 100mm
Ultrasonic sensors should be color differentiated at a distance of 100mm. It has to be taken into account, that the surface of the ultrasonic sensor cap is very glossy.
Scheda
Dati:


APP N° 382

Automotive Industry (Automobilindustrie)   
Differentiation of black and gray velvet at a sensor distance of 100mm
Black and gray interior parts with a velvet casing should be color differentiated at a distance of 100mm.
Scheda
Dati:


APP N° 381

Automotive Industry (Automobilindustrie)   
Color differentiation of lacquered plastic parts at a distance of 100mm
Lacquered plastic parts should be color differentiated. The parts are very glossy and even metallic lacquer should be controlled at a distance of in minimum 100mm.
Scheda
Dati:


APP N° 380

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic parts in the interior field at a distance of 100mm
Plastic interior parts should be color differentiated from a distance of 100mm.
Scheda
Dati:


APP N° 379

Automotive Industry (Automobilindustrie)   
Detection of a transparent film on a lacquered surface at a distance of 100mm
A transparent film should be detected on a shiny lacquered surface. It has to be taken into account that the plastic film has a certain polarization effect.
Scheda
Dati:


APP N° 378

Synthetic Industry (Kunststoffindustrie)   
Color control of injection moldings
Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge.
Scheda
Dati:


APP N° 377

Automotive Industry (Automobilindustrie)   
Color differentiation of ultrasonic sensors
Ultrasonic sensors should be color differentiated. It has to be taken into account, that the surface is very glossy.
Scheda
Dati:


APP N° 376

Automotive Industry (Automobilindustrie)   
Color differentiation of interior components with velvet surface
Parts made for the interior field with a black or dark gray velvet surface should be color differentiated.
Scheda
Dati:


APP N° 375

Automotive Industry (Automobilindustrie)   
Color differentiation of lacquered plastic components
Lacquered plastic parts should be differentiated. It should be taken into account, that the surface is very glossy.
Scheda
Dati:


APP N° 374

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic parts in the interior field
Gray plastic parts should be separated from dark gray plastic parts.
Scheda
Dati:


APP N° 373

Automotive Industry (Automobilindustrie)   
Detection of transparent film on lacquered plastic components
A transparent film should be detected on a black as well as white lacquered plastic part. It has to be taken into account, that the white and the black surface are very shiny and the plastic film as well.
Scheda
Dati:


APP N° 372

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Quality control of internal gears
The width of the teeth as well as the gap between the teeth of internal gears should be controlled.
Scheda
Dati:


APP N° 371

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Chromium plating presence control
The presence of chromium plating on a metal part should be controlled.
Scheda
Dati:


APP N° 370

Synthetic Industry (Kunststoffindustrie)   
Color control of white plastic profiles
The color of white plastic profiles should be controlled.
Scheda
Dati:


APP N° 369

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.
Scheda
Dati:


APP N° 368

Automotive Industry (Automobilindustrie)   
Position detection of lacquered metal sheets
The edge of different lacquered metal sheets should be precisely detected. Furthermore the distance of the painted metal plates should be measured. At this, it has to be taken into account, that a color gamut as well as gray scale range from shiny black to matt white should be covered.
Scheda
Dati:


APP N° 367

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
Scheda
Dati:


APP N° 366

Glass Industry (Glasindustrie)   
Color control of flat glass
The color of flat glass should be controlled in the transmitted-light mode.
Scheda
Dati:


APP N° 365

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color control of lacquered metal sheets
Lacquered metal sheets should be color differentiated. Even metallic paints must be color controlled.
Scheda
Dati:


APP N° 364

Agriculture (Agrarwirtschaft)   
Color control of the degree of ripeness of flowers
The degree of ripeness of flowers should be controlled. A distinguishing criterion for the degree of ripeness is the color of the flowers.
Scheda
Dati:


APP N° 363

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Length control of a metal rod
The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement.
Scheda
Dati:


APP N° 362

Synthetic Industry (Kunststoffindustrie)   
Label presence detection on plastic bottles
The presence of a label on plastic bottles should be controlled.
Scheda
Dati:


APP N° 361

Synthetic Industry (Kunststoffindustrie)   
Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
Scheda
Dati:


APP N° 360

Automotive Industry (Automobilindustrie)   
Presence control of a blue and a green mark on a gray plastic component
A green as well as a blue mark should be present on a gray plastic component.
Scheda
Dati:


APP N° 359

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Screw locking varnish presence control on female threads
The presence of a thread lock fluid should be controlled on inside threads.
Scheda
Dati:


APP N° 358

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Differentiation of grinded and raw metal pins
Grinded and raw metal pins should be differentiated.
Scheda
Dati:


APP N° 357

Automotive Industry (Automobilindustrie)   
Color differentiation of O-rings
O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy.
Scheda
Dati:


APP N° 356

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Differentiation of metal rods
Metal rods with an even finish should be differentiated from metal rods with a slotted end. Furthermore a metal rod with a black slotted end should be differentiated from a steel colored end.
Scheda
Dati:


APP N° 355

Synthetic Industry (Kunststoffindustrie)   
Width control of a semitransparent plastic film
The width of a semitransparent plastic film should be controlled. At this, the transversal drift of the 18.5mm wide plastic film is around ±10mm, thus the detecting range should be 50mm.
Scheda
Dati:


APP N° 354

Synthetic Industry (Kunststoffindustrie)   
Diameter control of plastic monofilaments
The diameter of plastic monofilaments should be controlled. At this, monofilaments with diameters starting from 0.1mm up to 2mm are possible.
Scheda
Dati:


APP N° 353

Synthetic Industry (Kunststoffindustrie)   
Double layer control of plastic films
With a view to the changeover from the double layer to the single layer range of a plastic film a sensor system should deliver exactly a signal which informs about the beginning of the single layer as well as the double layer range.
Scheda
Dati:


APP N° 352

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Defect detection on metal bands
Dark as well as bright spots with different size should be detected on metal bands.
Scheda
Dati:


APP N° 351

Automotive Industry (Automobilindustrie)   
Color control of seat belt plugs
Seat belt plugs should be color differentiated.
Scheda
Dati:


APP N° 350

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color control of plastic pins
Plastic pins which are used for seat belts should be color differentiated.
Scheda
Dati:


APP N° 349

Automotive Industry (Automobilindustrie)   
Color control of seat belts
The fabric of the seat belts should be color controlled.
Scheda
Dati:


APP N° 348

Automotive Industry (Automobilindustrie)   
Color control of seat belt rubbers
Seat belt rubbers should be color differentiated.
Scheda
Dati:


APP N° 347

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color control of seat belt sockets
Seat belt sockets should be color controlled.
Scheda
Dati:


APP N° 346

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Color control of T-grids for ceiling systems
T-grids used for ceiling systems should be color controlled.
Scheda
Dati:


APP N° 345

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Stamping mark presence control on metal wires
The presence of stamped small lines should be controlled on a copper colored metal wire.
Scheda
Dati:


APP N° 344

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Double sheet control of veneers
During the transportation of veneers, it should be controlled whether one or more than one veneer was picked up from a handling system.
Scheda
Dati:


APP N° 343

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Detection of a brand name on fog light glasses
A logo should be detected on a fog light glass. It has been shown that the brand name in the glass is acting like an optical component and deflects the laser beam in a different way compared to the normal glass surface.
Scheda
Dati:


APP N° 342

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.
Scheda
Dati:


APP N° 341

Synthetic Industry (Kunststoffindustrie)   
Plastic film plunging control
Folds in a matt plastic film should be detected.
Scheda
Dati:


APP N° 340

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color control of grooves on MDF plates
Grooves on MDF plates should be color controlled. In case of failure the MDF background color can be seen.
Scheda
Dati:


APP N° 339

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Metal sheet height control on rewinders and unwinders in the stamping industry
The position of metal stripes on re- and unwinders should be controlled. At this, it has to be taken into account that the metal stripes, especially the small bands, are oscillating and the acceleration can be very high.
Scheda
Dati:


APP N° 338

Synthetic Industry (Kunststoffindustrie)   
Plastic film thickness measurement
The thickness of a plastic film should be measured.
Scheda
Dati:


APP N° 337

Synthetic Industry (Kunststoffindustrie)   
Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
Scheda
Dati:


APP N° 336

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of fluorescent marks on wooden board
Fluorescent marks should be detected on wooden boards. At this, two marks which are close together should be proper detected.
Scheda
Dati:


APP N° 335

Automotive Industry (Automobilindustrie)   
Presence detection of felt label on a backlight shelf
The presence of a felt label on a rear window shelf should be checked.
Scheda
Dati:


APP N° 334

Automotive Industry (Automobilindustrie)   
Color differentiation of fabrics and leather imitations
Fabrics as well as leather imitations should be differentiated in the automotive interior field.
Scheda
Dati:


APP N° 333

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Frequency control of industrial ventilators
Ventilators for industrial purposes should be frequency checked. Furthermore the direction of rotation should be controlled.
Scheda
Dati:


APP N° 332

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of super elevations of aluminum profile
Super elevations of aluminum profile should be detected.
Scheda
Dati:


APP N° 331

Automotive Industry (Automobilindustrie)   
Detection of red and white diffuse light on interior components
The diffuse red and white light should be detected on interior components.
Scheda
Dati:


APP N° 330

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
Scheda
Dati:


APP N° 329

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Corrugated cardboard color control
The color of corrugated cardboards should be controlled. Especially black areas should be detected and the distance from the cardboard to the sensor should be larger than 120mm.
Scheda
Dati:


APP N° 328

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Double layered paper sheet control
Double-layered paper sheets should be differentiated from single sheets.
Scheda
Dati:


APP N° 327

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Tarnish film detection on metal band
A tarnish film should be detected on metal band.
Scheda
Dati:


APP N° 326

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Presence control of red lubricant on metal pin
The presence of a red lubricant on a metal pin should be controlled. A minimum sensor distance of approx. 200mm is required.
Scheda
Dati:


APP N° 325

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Braided hose wire absence and overstretch control
The presence of all wires inside a braided hose should be controlled. Furthermore it should be controlled, whether the hose is overstretched.
Scheda
Dati:


APP N° 324

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Braided cable sleeves diameter failure detection
Deviations of the diameter of braided sleeves should be detected.
Scheda
Dati:


APP N° 323

Synthetic Industry (Kunststoffindustrie)   
Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
Scheda
Dati:


APP N° 322

Automotive Industry (Automobilindustrie)   
Detection of a yellow stripe on metal clamps
The presence of a yellow striped on metal clamps should be detected.
Scheda
Dati:


APP N° 321

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.
Scheda
Dati:


APP N° 320

Synthetic Industry (Kunststoffindustrie)   
Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
Scheda
Dati:


APP N° 319

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Differentiation of coated and uncoated syringes
Coated syringes should be distinguished from uncoated syringes.
Scheda
Dati:


APP N° 318

Automotive Industry (Automobilindustrie)   
Detection of black and gray lacquer coat on metal part
In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts.
Scheda
Dati:


APP N° 317

Packaging Industry (Verpackungsindustrie)   
Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
Scheda
Dati:


APP N° 316

Automotive Industry (Automobilindustrie)   
Color differentiation of ultrasonic sensor caps from far distance
The color of ultrasonic sensor caps should be controlled from a distance of 450mm.
Scheda
Dati:


APP N° 315

Automotive Industry (Automobilindustrie)   
Adhesive film presence detection on plastic screws
The presence of an adhesive film should be controlled on the thread of plastic screws.
Scheda
Dati:


APP N° 314

Automotive Industry (Automobilindustrie)   
Differentiation of different colored ultrasonic sensors
Ultrasonic sensors should be color differentiated.
Scheda
Dati:


APP N° 313

Automotive Industry (Automobilindustrie)   
Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
Scheda
Dati:


APP N° 312

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
Scheda
Dati:


APP N° 311

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Presence control of a blind thread in aluminum casting
An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole.
Scheda
Dati:


APP N° 310

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of a gap on adhesive plaster
The presence of a gap of the tape on an adhesive plaster should be detected.
Scheda
Dati:


APP N° 309

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Color mark detection on optical fibers and color differentiation of optical fibers
The color as well as a color mark should be detected on optical fibers. The feed speed of the glass fiber is roughly 10 m/s.
Scheda
Dati:


APP N° 308

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.
Scheda
Dati:


APP N° 307

Automotive Industry (Automobilindustrie)   
Color Differentiation of leather imitations in the automotive field
Different colored leather imitations should be recognized and differentiated.
Scheda
Dati:


APP N° 306

Provisions Industry (Lebensmittelindustrie)   
Color control of the roast level of coffee beans
The color of roasted beans should be control. At this, the color informs about the roast level of the coffee beans.
Scheda
Dati:


APP N° 305

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Detection of a black marked welding line on different metal stamping stripes
A black mark should be detected on metal stamping stripe. At this, the stripes can be different in color and gloss.
Scheda
Dati:


APP N° 304

Glass Industry (Glasindustrie)   
Differentiation of the backside from the front side of a glass plate
The matt backside of a glass plate should be differentiated from the glossy front side.
Scheda
Dati:


APP N° 303

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Dome height inspection of lead frames
The height of the domes on lead frames should be controlled. Even a transparent coating can be controlled.
Scheda
Dati:


APP N° 302

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Distance measurement onto an aluminum ground surface
The distance to an aluminum ground surface should be measured. At this, the grinding is extremely angle-dependent and thus, the consequences in using a laser displacement sensor are that the reflectivity is strongly angle-dependent, too.
Scheda
Dati:


APP N° 301

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.
Scheda
Dati:


APP N° 300

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color differentiation of beige papers
Beige colored papers should be color differentiated. At this, the detecting area should be around 25mm in diameter.
Scheda
Dati:


APP N° 299

Pharmacy (Pharmazie)   
Detection of embeddings in branches
Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected.
Scheda
Dati:


APP N° 298

Automotive Industry (Automobilindustrie)   
Color differentiation of interior components
Six different interior components should be color differentiated. The sensor distance should be around 50mm and the detecting range of the color sensor at this distance should be approximately 20mm in diameter.
Scheda
Dati:


APP N° 297

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color differentiation of plastic fittings
The color of plastic fittings should be controlled. At this, the high gloss factor of the surface reduces the contrast difference between the three different components.
Scheda
Dati:


APP N° 296

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
Scheda
Dati:


APP N° 295

Automotive Industry (Automobilindustrie)   
Detection of a fluorescent coating on black rubber seal
The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range.
Scheda
Dati:


APP N° 294

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.
Scheda
Dati:


APP N° 293

Automotive Industry (Automobilindustrie)   
Color and contrast control of a tachometer sheet
The color of a black tachometer sheet should be controlled; the color as well as the grey scale should remain in a certain tolerance range.
Scheda
Dati:


APP N° 292

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
Scheda
Dati:


APP N° 291

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Lead frame gloss control
The gloss of lead frames should be controlled. At this, the surface where the semiconductor chip should be placed can be blank or rough.
Scheda
Dati:


APP N° 290

Glass Industry (Glasindustrie)   
Color differentiation of bottom colored clear glass bottles
Bottom colored clear glass bottles should be differentiated. At this, four different colored bottles can be possible: clear, yellow, red and violet.
Scheda
Dati:


APP N° 289

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Evenness control of angle grinder discs
The flatness of angle grinder discs should be controlled during the rotation.
Scheda
Dati:


APP N° 288

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Presence control of an o-ring seal on aluminum casing
The presence of an o-ring seal on aluminum housing should be controlled.
Scheda
Dati:


APP N° 287

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.
Scheda
Dati:


APP N° 286

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Gloss control of a cable jacket
The gloss of a black cable jacket should be controlled.
Scheda
Dati:


APP N° 285

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Presence control of a fleece on a cable harness
The presence of a fleece on a cable bundle should be controlled. At this, the color of the harness can differ from batch to batch, whereas the color of the fleece remains white.
Scheda
Dati:


APP N° 284

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Glass Industry (Glasindustrie)   
Position control of filament holders in bulbs
The position of the filament holders in clear as well as red glass bulbs should be controlled.
Scheda
Dati:


APP N° 283

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Position control of spring locks on metal parts
The position of the snap fit of a metal part should be controlled.
Scheda
Dati:


APP N° 282

Automotive Industry (Automobilindustrie)   
Counting of stacked metal blanks
The correct number of stacked metal blanks should be controlled.
Scheda
Dati:


APP N° 281

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Ejection control of stamping parts
Due to stamping tool protection reasons the ejection of very small stamping parts should be controlled and the parts counted. The ejection speed of the parts is in the range of a few m/s.
Scheda
Dati:


APP N° 280

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.
Scheda
Dati:


APP N° 279

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
Scheda
Dati:


APP N° 278

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
Scheda
Dati:


APP N° 277

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
Scheda
Dati:


APP N° 276

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
Scheda
Dati:


APP N° 275

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.


APP N° 274

Automotive Industry (Automobilindustrie)   
Detection of machining marks on bimetallic strips of slide bearings
Chatter marks on slide bearing stripes should be detected immediately before the grinding process.
Scheda
Dati:


APP N° 273

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
Scheda
Dati:


APP N° 272

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of an adhesive tape on plastic flooring
An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color.
Scheda
Dati:


APP N° 271

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
Scheda
Dati:


APP N° 270

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Differentiation of front- and backside of a fleece
The front side of a fleece should be differentiated from the back side. The back side (non structured side) is UV fluorescent, whereas the plastic structured film is nonfluorescent and damps the fluorescence.
Scheda
Dati:


APP N° 269

Automotive Industry (Automobilindustrie)   
Color differentiation of two plastic parts
Two different colored plastic components used in the interior field should be differentiated.
Scheda
Dati:


APP N° 268

Automotive Industry (Automobilindustrie)   
High speed angle measurement with direction control
The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled
Scheda
Dati:


APP N° 267

Synthetic Industry (Kunststoffindustrie)   
Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
Scheda
Dati:


APP N° 266

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of the section point on black nonmetallic strapping
The section point on a shiny black nonmetallic strapping should be detected optically in the reflective way.
Scheda
Dati:


APP N° 265

Automotive Industry (Automobilindustrie)   
Detection of a red shiny plastic label
The presence of a shiny red plastic label on a black plastic component should be detected.
Scheda
Dati:


APP N° 264

Automotive Industry (Automobilindustrie)   
Detection of a red color mark on an aluminum rod
The task is to detect a red color mark on an aluminum rod (the red color mark informs about defect metallurgic domains in the aluminum rod). At this, the red paint which is used for color marking can differ and furthermore it can happen that the color mark is partly scraped. In addition an aluminum surface can be contaminated with rust (comes from a steel band, which is used for fixing the rods in a former process), which drifts also into the red color.
Scheda
Dati:


APP N° 263

Automotive Industry (Automobilindustrie)   
Color differentiation of a black and brown center console
A black and dark brown plastic center console should be differentiated. It has to be into account, that the surface where the color should be controlled is very shiny.
Scheda
Dati:


APP N° 262

Automotive Industry (Automobilindustrie)   
Color differentiation between a brown and a black cap in a console
A brown plastic cap should be differentiated from a black plastic cap in a console.
Scheda
Dati:


APP N° 261

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Overfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling.
Scheda
Dati:


APP N° 260

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Underfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with a view to underfilling.
Scheda
Dati:


APP N° 259

Provisions Industry (Lebensmittelindustrie)   
Color control of cookies
During the production of cookies the color should be controlled.
Scheda
Dati:


APP N° 258

Pharmacy (Pharmazie)   
Liquid level control from liquid in semi transparent tube
The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level.
Scheda
Dati:


APP N° 257

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of transparent coating on rubber seals
The coating of rubber seals should be detected. At this, different types should be controlled with the same sensor, thus the spot size of the sensor must fit to the smallest rubber size and should of course deliver proper results from the bigger seals, too.
Scheda
Dati:


APP N° 256

Automotive Industry (Automobilindustrie)   
Counting of dishes for water cooling systems
The number of dishes in a package should be counted during the movement of the package.
Scheda
Dati:


APP N° 255

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of the presence of an oil film on a turned metal part
The presence of an oil film without gap should be controlled on a turned metal part.
Scheda
Dati:


APP N° 254

Automotive Industry (Automobilindustrie)   
Detection of punch marks in aluminum surface
Punch marks in aluminum surface should be detected.
Scheda
Dati:


APP N° 253

Automotive Industry (Automobilindustrie)   
Detection of a stamped blue mark on aluminum housing
A stamped blue mark should be detected on aluminum housing. At this, the degree of strength of the blue lacquer is changing dependent of the moisture content of the color.
Scheda
Dati:


APP N° 252

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.
Scheda
Dati:


APP N° 251

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic interior parts
Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor.
Scheda
Dati:


APP N° 250

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Presence control of a primer on black anodized aluminum
The presence of a primer coating on black anodized aluminum should be controlled.
Scheda
Dati:


APP N° 249

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Sealing bead presence control
The presence of a sealing bead on aluminum housing should be controlled. Gaps should be detected.
Scheda
Dati:


APP N° 248

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Attitude control of an asymmetric spiral spring
The attitude of an asymmetric suppressed spring should be controlled.
Scheda
Dati:


APP N° 247

Textile Industry (Textilindustrie)   
Presence control of carbon fibers on a sewing needle
The presence of a carbon fiber bundle on a sewing needle should be controlled. It has to be taken into account, that there is only space for the sensor in the direction of the sewing needle.
Scheda
Dati:


APP N° 246

Environmental Technology (Umwelttechnik)   
Gloss measurement of the primer surface on a vane
The gloss factor of the primer surface of vanes from wind turbines should be measured contactless. At this, the gloss sensor is mounted on a robot and will be moved vertically to make sure, that the distance to the primer surface of the vane remains approximately at 15mm, simultaneously the vane will be moved horizontally so that the gloss factor can be measured along the long axis of the vane. Normally the gloss factor of the primer surface should be lower than 5 in order to guarantee that the following coating get a fix compounding to the primer surface.
Scheda
Dati:


APP N° 245

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Color mark detection on an optical fiber
Color marks should be detected on optical fibers. The rate of feed is around 10m/s.
Scheda
Dati:


APP N° 244

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Color control of the coating of an optical fiber
The coating of an optical fiber should be controlled. At this, cuttings and soiling should be detected, even at a product speed of up to 10m/s.
Scheda
Dati:


APP N° 243

Textile Industry (Textilindustrie)   
Position control of a fluorescent thread in a fabric
The position of a fluorescent thread in a fabric should be controlled. UV light (365nm to 385nm) is necessary for excitation of the fluorescent material. The fluorescent material emits light in the visible range (green).
Scheda
Dati:


APP N° 242

Synthetic Industry (Kunststoffindustrie)   
Presence control of an optical transparent plastic film
The presence of a transparent plastic film should be controlled. At this, the distance of the sensor to the plastic film should be in minimum 1m and it should be noticed, that the plastic film can flutter a few millimeters.
Scheda
Dati:


APP N° 241

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.
Scheda
Dati:


APP N° 240

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Concentric runout control of a wheel
The concentricity of a high speed wheel should be controlled.
Scheda
Dati:


APP N° 239

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Detection of a color mark on a transparent plastic film
A color mark on a transparent plastic film should be detected. The sensor is used in the Ɛx – range, thus, an optical fiber unit is necessary.
Scheda
Dati:


APP N° 238

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a line engraving on the bearing surface of a pulley
An engraved line on the bearing surface of a black pulley should be detected.
Scheda
Dati:


APP N° 237

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color mark position control
The position of printed color marks on aluminum foils and plastic films should be controlled. At this, the sensor system should deliver an analogue signal which is proportional to the position of the color mark. At this, the color of the background as well as of the color mark can change from batch to batch, which means, that a flexible “easy to handle” system is required. Beside the digital output (a signal change should happen if the light spot is covered by 50% of the color mark) there is an analog output desired, which informs about the actual position of the color mark: 5V means, that the light spot covers to 50% the color mark and 0V and 10V shows, that the light spot falls either only onto the background or onto the color mark.
Scheda
Dati:


APP N° 236

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Detection of uninsulated cables in a twisted cable assembly
Uninsulated cables should be detected in a twisted cable assembly.
Scheda
Dati:


APP N° 235

Automotive Industry (Automobilindustrie)   
Color differentiation of spray lacquered plastic parts
Two different colored plastic components should be distinguished.
Scheda
Dati:


APP N° 234

Textile Industry (Textilindustrie)   
Edge detection of a fabric
The lateral position of a wide-meshed fabric should be controlled in a range of 20mm. At this, the necessary accuracy should be ±2mm and the bandwidth of the analogue output signal has to be a few Hz.
Scheda
Dati:


APP N° 233

Packaging Industry (Verpackungsindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.
Scheda
Dati:


APP N° 232

Glass Industry (Glasindustrie)   
Diameter measurement and position control of glass rods
The diameter as well as the position of glass rods, the starting product of optical fibers, should be measured. Typical diameters of glass rods are in the range of 20mm to 90mm.
Scheda
Dati:


APP N° 231

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.
Scheda
Dati:


APP N° 230

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.
Scheda
Dati:


APP N° 229

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Detection of color marks on slide bearing shells
Red, green and yellow color marks as well as no color mark on slide bearing shells should be detected and distinguished. It should be taken into account that the color mark should be detected even if it is partially removed.
Scheda
Dati:


APP N° 228

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Eccentricity control of belt pulley
The eccentricity of belt pulley should be controlled. The dimension x should be controlled over the whole circle.
Scheda
Dati:


APP N° 227

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Diameter control of different wires during the production
The diameter of different metal wires should be controlled during the production process.
Scheda
Dati:


APP N° 226

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color control of a holographic transparent film
During the production of a holographic transparent film the color should be inline controlled. At this the color can only be detected under an angle of 30° to the vertical axis if the light falls perpendicular onto the holographic film. Furthermore the frontend should be directed perpendicular to the transport direction of the holographic film.
Scheda
Dati:


APP N° 225

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color differentiation of three different plastic components in the interior field
Three different colored plastic parts should be differentiated.
Scheda
Dati:


APP N° 224

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.
Scheda
Dati:


APP N° 223

Synthetic Industry (Kunststoffindustrie)   
Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
Scheda
Dati:


APP N° 222

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Sleeve presence control on an injection needle
The presence of a sleeve on an injection needle should be controlled.
Scheda
Dati:


APP N° 221

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
Scheda
Dati:


APP N° 220

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Lattice texture presence control on a fleece stripe
The presence of a lattice texture on a fleece stripe should be controlled.
Scheda
Dati:


APP N° 219

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Line detection on printed semi transparent plastic film
A golden colored line should be detected on a semi transparent plastic film.
Scheda
Dati:


APP N° 218

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
Scheda
Dati:


APP N° 217

Glass Industry (Glasindustrie)   
Differentiation of the polished surface from the grinded surface of a glass plate
During the handling of glass plates the position of the polished surface must be controlled.
Scheda
Dati:


APP N° 216

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Presence control of a paper sheet on an aluminum plate
The presence of a paper sheet on different colored aluminum plates should be controlled.
Scheda
Dati:


APP N° 215

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Noncontact thickness measurement of metal sheets
The thickness of metal sheets should be measured, but contactless.
Scheda
Dati:


APP N° 214

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of the presence of final UV fluorescent coating of laminate
The presence of the upper layer of a laminate should be controlled. At this, the layer is UV fluorescent.
Scheda
Dati:


APP N° 213

Chemical Industry (Chemische Industrie)   
Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
Scheda
Dati:


APP N° 212

Packaging Industry (Verpackungsindustrie)   
Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.
Scheda
Dati:


APP N° 211

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Presence control of wax coating on steel wire ropes
The presence of wax coating on steel wire ropes should be controlled. The wax is supplied with fluorescent additives.
Scheda
Dati:


APP N° 210

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
Double sheet control of stamping parts in the automotive industry
During the handling process of stamped metal parts it happens, that instead of one part two or more parts will be sucked up from a robot.
Scheda
Dati:


APP N° 209

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Gloss control of cutting rings
The gloss of cutting rings should be controlled. Two components, different in gloss, should be distinguished.
Scheda
Dati:


APP N° 208

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Detection of a photosensitive stripe on a metal plate
A photosensitive stripe should be detected on a metal sheet. At this, lightning sources which are working in the visible range cannot be used.
Scheda
Dati:


APP N° 207

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of a gap between successive hygiene articles during the transportation in a conveyor belt
Panty liners will be transported between two belts. The beginning as well as the end of a panty liner should be detected. Furthermore, a gap between two successive panty liners should be detected. The only practicable possibility is to look through the two conveyor belts.
Scheda
Dati:


APP N° 206

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color differentiation of brown plastic door seals
Two different brown colored plastic seals should be differentiated.
Scheda
Dati:


APP N° 205

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color differentiation of plastic stripes
Different colored plastic stripes should be differentiated.
Scheda
Dati:


APP N° 204

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of the alignment of a screw
The alignment of screws in a mechanical guide should be controlled.
Scheda
Dati:


APP N° 203

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Presence control of the sleeve on an injection needle
The presence of a sleeve should be controlled.
Scheda
Dati:


APP N° 202

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
Scheda
Dati:


APP N° 201

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.
Scheda
Dati:


APP N° 200

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
Scheda
Dati:


APP N° 199

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a lasered reference mark on an aluminum foil and differentiation from a lasered stripe
A lasered reference mark on a shiny aluminum foil should be detected. A proper detection of the reference mark should be guaranteed, which means, that the lasered stripe must not be detected as a reference mark.
Scheda
Dati:


APP N° 198

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Color control of blood in a laboratory glass
Blood in a laboratory glass with different liquid level should be color controlled.
Scheda
Dati:


APP N° 197

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Inline color control of abrasive material
Abrasive band material should be inline color controlled.
Scheda
Dati:


APP N° 196

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Optical control of electrical contacts on a partly plastic covered stamping part
In the error case the electrical contacts of a stamping part can be slightly covered with a thin plastic film. This should be detected with an optical system.
Scheda
Dati:


APP N° 195

Chemical Industry (Chemische Industrie)   
Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
Scheda
Dati:


APP N° 194

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of an edge in an aluminum wheel rim
The edge in an aluminum wheel rim should be detected. The speed of the wheel rim is around 50 rpm.
Scheda
Dati:


APP N° 193

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a fluorescent mark on a metal sheet matrix
A fluorescent mark on the top side of a metal sheet matrix should be detected.
Scheda
Dati:


APP N° 192

Automotive Industry (Automobilindustrie)   
Control of the presence of a fluorescent film on a rubber lip
A rubber lip for car doors is coated with a thin fluorescent film. The presence of this film should be checked during the production.
Scheda
Dati:


APP N° 191

Automotive Industry (Automobilindustrie)   
Color differentiation of ultrasonic sensors
Ultrasonic sensors for the automotive industry should be color differentiated. At this, the shiny surface of the ultrasonic sensors causes normally a high direct reflection.
Scheda
Dati:


APP N° 190

Textile Industry (Textilindustrie)   
Detection of a gap in a fabric
In a fabric a gap should be detected. At this different colored fabric (from dark to bright) are possible.
Scheda
Dati:


APP N° 189

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Inline color control of a golden coated wire
A golden coated wire should be controlled during the production process. Furthermore, local defects like grooves should be detected. At this, the production speed of the wire is approximately 10 m/s.
Scheda
Dati:


APP N° 188

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Inline color control of insulated cables
During the production the color of a plastic insulation should be controlled (e.g. brown and red insulated cables). At this the gloss of the plastic surface can be changing due to temperature and humidity changes. Therefore a sensor should be used which is independent of the gloss of the surface.
Scheda
Dati:


APP N° 187

Synthetic Industry (Kunststoffindustrie)   
Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
Scheda
Dati:


APP N° 186

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Welding line detection on a metal stripe
A welding line on a metal stripe should be detected. At this, the welding line looks different, even a grinded welding line is possible.
Scheda
Dati:


APP N° 185

Environmental Technology (Umwelttechnik)   
Gloss measurement of the glass surface of a photo voltaic panel
The gloss factor of the glass cover of a photo voltaic panel should be measured during the production.
Scheda
Dati:


APP N° 184

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Double layer control of fleece material
It should be differentiated between one and two layers of a fleece material.
Scheda
Dati:


APP N° 183

Automotive Industry (Automobilindustrie)   
Differentiation of front side and back side from a sound damping carpet
The front side should be distinguished from the back side of a sound damping carpet.
Scheda
Dati:


APP N° 182

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of a colored line on a MDF plate
A red colored line should be detected on the surface of a MDF plate. At this, the color of the stripe differs in intensity and slightly in color. Furthermore the structure of the MDF surface can also changing from coarse to fine.
Scheda
Dati:


APP N° 181

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color control of brass coated steel wires
The quality of brass coated steel wires should be controlled. At this, the color of the wire delivers information about the thickness of the coating.
Scheda
Dati:


APP N° 180

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
Scheda
Dati:


APP N° 179

Automotive Industry (Automobilindustrie)   
Detection of the seam of leather and leather imitation components
The seam of leather and leather imitation components should be detected.
Scheda
Dati:


APP N° 178

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.
Scheda
Dati:


APP N° 177

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a joint on a wheel rim
A joint on an aluminum wheel rim should be detected. At this, the wheel is rotating with a speed of 50 rpm.
Scheda
Dati:


APP N° 176

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
Scheda
Dati:


APP N° 175

Automotive Industry (Automobilindustrie)   
Color differentiation of two different structured plastic moldings
Two different structured plastic components should be distinguished. At this, the background color is exactly the same.
Scheda
Dati:


APP N° 174

Automotive Industry (Automobilindustrie)   
Differentiation of leather imitations of interior automotive components
Different colored interior components should be distinguished.
Scheda
Dati:


APP N° 173

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Leak detection of welding lines on dish washers
Leaks should be detected on welding lines of dish washers. At this, a robot equipped with a spray nozzle sprays a fluorescent liquid into the inner chamber of a dish washer. If leaks are present in the welding line, the fluorescent liquid flows through these leaks and can be detected with a fluorescent color detector.
Scheda
Dati:


APP N° 172

Automotive Industry (Automobilindustrie)   
Packaging Industry (Verpackungsindustrie)   
Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.
Scheda
Dati:


APP N° 171

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Color differentiation of fabrics in the interior field of the automotive industry
Different fabrics should be distinguished by color control.


APP N° 170

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Diameter control of a metal wire with and without insulation
The diameter of a wire without insulation (Ø 50µm) should be differentiated from a wire with insulation (Ø 110µm).
Scheda
Dati:


APP N° 169

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Color control of silver colored metal wires
The color as well as the gray scale of a silver colored wire can differ in a coil. To avoid these inhomogenities the wire should be color controlled.
Scheda
Dati:


APP N° 168

Automotive Industry (Automobilindustrie)   
Color differentiation of garnish moldings
Different colored garnish moldings should be distinguished. It has to be taken into account, that the components are very shiny.
Scheda
Dati:


APP N° 167

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Detection of spray marks on the metal surface of water cooler
Defective or damaged water coolers will be marked during the assembling process with a blue spray mark. Intensity and size of the color mark, however, differs extremely.
Scheda
Dati:


APP N° 166

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color and contrast control during the printing process of safety paper
During the printing of safety paper the color as well as the contrast should be controlled on two fields on the reference color stripe.
Scheda
Dati:


APP N° 165

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Quality inspection of shower hoses
The surface of shower hoses should be controlled. Failures like slight gray tint, gray tint (bloom), yellow tint surfaces (yellowness) but also a metallic overlap and a red ribbon should be detected.
Scheda
Dati:


APP N° 164

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Measurement of the height of a welding line and a polished welding line on a metal sheet
The height of a welding line should be controlled; at this, the presence of the welding line has to be checked before the grinding process and the height of the polished welding line has to be measured after the grinding process.
Scheda
Dati:


APP N° 163

Automotive Industry (Automobilindustrie)   
Presence control of a UV fluorescent yellow coating on a rubber seal
A rubber seal is normally coated with a fluorescent layer. This layer is fluorescent in blue if UV light is used. Additionally to this blue fluorescent coating a yellow fluorescent coating is used for marking defect areas on the rubber seal. The task is now to detect the UV fluorescent yellow coating on a rubber seal, which is primary UV blue coated.
Scheda
Dati:


APP N° 162

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Presence control of a label on a nursing pad
The presence of a label on a nursing pad should be controlled.
Scheda
Dati:


APP N° 161

Synthetic Industry (Kunststoffindustrie)   
Width control of polyurethane profiles
The width of different colored polyurethane profiles should be measured during the production.
Scheda
Dati:


APP N° 160

Synthetic Industry (Kunststoffindustrie)   
Height control of polyurethane profiles
The height of different colored polyurethane profiles should be controlled. It has to be aware that the polyurethane material is slightly milky which means, that light which is directed onto the profile will partly enter the surface.
Scheda
Dati:


APP N° 159

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
Scheda
Dati:


APP N° 158

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.
Scheda
Dati:


APP N° 157

Automotive Industry (Automobilindustrie)   
Differentiation of a matt and a glossy chromate knob
A matt chromate knob should be differentiated from a glossy chromate knob.
Scheda
Dati:


APP N° 156

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
Scheda
Dati:


APP N° 155

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a proper color mark on a metal disk
The presence of a proper color mark on a metal disk should be detected. The parts with a missing color mark as well as the parts with a color marks which are partly erased should be sorted out.
Scheda
Dati:


APP N° 154

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Detection of the distance holders of a filament in a bulb
The position of the distance holders of a filament should be controlled. There is only a chance to use a reflective system due to space reasons. The bulb together with the filament and the holders can be moved position controlled.
Scheda
Dati:


APP N° 153

Automotive Industry (Automobilindustrie)   
Differentiation between a shaft with and without a tooth system
Two different metal shafts should be differentiated. The one has a flat cylindrical surface whereas the other type comes with a cogwheel.
Scheda
Dati:


APP N° 152

Automotive Industry (Automobilindustrie)   
Detection of fluorescent cured glue on a shaft
On a shaft fluorescent glue is used to seal the intersection between the shaft and a roll.
Scheda
Dati:


APP N° 151

Automotive Industry (Automobilindustrie)   
Differentiation of leather imitations
Two black leather imitations should be differentiated and the gloss factor should be documented with a gloss measurement device.
Scheda
Dati:


APP N° 150

Environmental Technology (Umwelttechnik)   
Waste water detection and classification
Waste water should be detected, controlled and classified. For this purpose sight glasses can be used for the measurement or even dipping the optical front end unit into the waste water is also possible.
Scheda
Dati:


APP N° 149

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Differentiation between water moistened and dry floor tiles
After the moisturization the floor tiles should be checked, whether the amount of moisture is in the right range or out of range (too much or too little moisture content). The tiles looks brighter if the degree of moisture is too small and the tiles looks darker as normal if too much water is on the tiles. In the normal case the tiles looks gray in color.
Scheda
Dati:


APP N° 148

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.
Scheda
Dati:


APP N° 147

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.
Scheda
Dati:


APP N° 146

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Detection of knots and bark in wooden stakes
Wooden stakes should be produced free of knots and bark.


APP N° 145

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Differentiation of coated wires from uncoated wires
Wires of approximately 0.12mm in diameter must be coated and it should be monitored, whether the coating is present or not.
Scheda
Dati:


APP N° 144

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Position monitoring of tiles
The orientation of tiles on a conveyor belt should be controlled. There are three chamfers which splits the tile into four parts and these chamfers should be perpendicular orientated on the conveyor belt.
Scheda
Dati:


APP N° 143

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Position monitoring of hook-and-loop fasteners
The orientation of Velcro® fasteners should be controlled.
Scheda
Dati:


APP N° 142

Automotive Industry (Automobilindustrie)   
Control of the orientation of leather imitation
The orientation of different colored leather imitations should be controlled.
Scheda
Dati:


APP N° 141

Automotive Industry (Automobilindustrie)   
Position monitoring of washers in plastic components
The orientation of washers (backside or front side above) should be checked. To control from the top (perpendicular to the surface) is not possible due to arrangement reasons.
Scheda
Dati:


APP N° 140

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.
Scheda
Dati:


APP N° 139

Automotive Industry (Automobilindustrie)   
Position control of a silicon cap
The position of a semi transparent silicon cap should be controlled.


APP N° 138

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Eccentricity control of an aluminum drive disk
The eccentricity of an aluminum driving disk, which is used for winding and rewinding of film strips, should be controlled with an accuracy of approximately 10µm.
Scheda
Dati:


APP N° 137

Automotive Industry (Automobilindustrie)   
Positioning of a rubber seal component
A rubber gasket should be exact positioned.
Scheda
Dati:


APP N° 136

Automotive Industry (Automobilindustrie)   
Presence control of an inscription on a rubber seal
On a rubber seal the presence of a yellow inscription should be checked.
Scheda
Dati:


APP N° 135

Automotive Industry (Automobilindustrie)   
Color differentiation of three different colored spiral springs
Three different colored spiral spring types should be differentiated. At the position where it should be controlled the position of the coil spring is accidentally oriented.
Scheda
Dati:


APP N° 134

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Automotive Industry (Automobilindustrie)   
Control of the presence of fibers in an aluminum tube
In aluminum tubes with a length of approximately 160mm and an inner diameter of 14mm the presence of fibers should be checked, at which a good tube is a tube without any fibers. The tubes can be positioned and turned 360° around, around both ends of the tube there is space enough for mounting the sensors.
Scheda
Dati:


APP N° 133

Automotive Industry (Automobilindustrie)   
Color control of different components of a gear box
After the assembling of a gear box, the different components must be controlled in relation to the color.
Scheda
Dati:


APP N° 132

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Profile measurement of an abrasive block
The contour of a grinding stone should be measured. The necessary measurement range is approximately 20mm.
Scheda
Dati:


APP N° 131

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
Scheda
Dati:


APP N° 130

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Detection of a fluorescent stripe on leaflets
On an advertising material a fluorescent stripe should be detected. Print shops get orders for promotion material from chain of stores. The stores of a chain have exactly the same leaflet except the address of the respective store, thus it must be paid attention during the packaging process in the print shop. At this a fluorescent stripe will be painted onto the first ten leaflets with the other address. At the beginning of the printing process it is possible to teach the sensor onto the fluorescent stripe, thus the fluorescent as well as optical absorption effects from the paper of the advertising material can be compensated.
Scheda
Dati:


APP N° 129

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
Scheda
Dati:


APP N° 128

Packaging Industry (Verpackungsindustrie)   
Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).
Scheda
Dati:


APP N° 127

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Diameter control of holes
The diameter of holes in an aluminum bloc should be controlled. Holes with diameters up to 8mm must be measured.
Scheda
Dati:


APP N° 126

Chemical Industry (Chemische Industrie)   
Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.


APP N° 125

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Positioning of a filament in a bulb
A filament must be positioned precisely into a bulb. It should be noted that the filament can be bent, thus the end of the filament lies not on the symmetrical axis of the bulb. The inner diameter of the bulb is equal to approximately 1.8mm and the diameter of the filament is around 0.3mm.
Scheda
Dati:


APP N° 124

Automotive Industry (Automobilindustrie)   
Detection of a metal sheet on a stack
Metal plates are removed from a stack with a robot. After the last metal sheet is removed a sensor should inform the robot to avoid that the base plate will be sucked up from the robot too. The base plate can consist of MDF (medium density fiberboard), wood, rubber or even a metal which is different from the metal sheet.
Scheda
Dati:


APP N° 123

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Robot Industry (Roboterindustrie)   
Double sheet control
Metal plates should be removed from a stack with a robot. The robot sucks the metal sheets one by one and it should be avoided for safety reasons to move two metal sheets simultaneously. A sensor should detect double sheet not from the top but from the side. Furthermore, the system should be adapted automatically after a change of the type of metal sheet (different thickness or different metal).
Scheda
Dati:


APP N° 122

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
Scheda
Dati:


APP N° 121

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
Scheda
Dati:


APP N° 120

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.
Scheda
Dati:


APP N° 119

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
Scheda
Dati:


APP N° 118

Textile Industry (Textilindustrie)   
Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
Scheda
Dati:


APP N° 117

Textile Industry (Textilindustrie)   
Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
Scheda
Dati:


APP N° 116

Pharmacy (Pharmazie)   
Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
Scheda
Dati:


APP N° 115

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Quality control of the surface of a cone on a cogwheel
The surface of the cone on a cogwheel should be checked. The surface of a proper cone looks very homogeneous; the surface of a bad cogwheel shows grooves and scratches. For investigations the cogwheel can be turned around its axis. The distance from the sensor to the object should be around 200 mm.
Scheda
Dati:


APP N° 114

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Differentiation between single-colored and two-colored cables
During the coiling process of cables it has to be checked, whether monochromatic or dichromatic cables will be winded. At this the cables will be transported with a speed of 15 m/s and the cable will be turned 360° in 0.5 seconds around the axis. This turn around its axis can be used for color control. The smallest diameter of the cables is Ø 1.35 mm and the biggest diameter is around Ø 3mm. To produce a two-colored cable, a single-colored cable is used and a line with a width of approximately 0.8mm will be painted onto the cable, hence a white light spot with a diameter of Ø 0.7mm is used for color control.
Scheda
Dati:


APP N° 113

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Color differentiation of cogwheels
The task is to differentiate between black coated and non-coated cogwheels. Furthermore the minimum distance from the sensor to the object should be 160mm.
Scheda
Dati:


APP N° 112

Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
Position control in the Ɛx range
The position of a metal blade should be controlled in the Ɛx range over a measuring range of approx. 6mm.
Scheda
Dati:


APP N° 111

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Pharmacy (Pharmazie)   
Chemical Industry (Chemische Industrie)   
Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
Scheda
Dati:


APP N° 110

Automotive Industry (Automobilindustrie)   
Spray jet control in the Ɛx range
For the spray jet control in the Ɛx range (zone 0) the most suitable system is a unit which comes without electronically components in the Ɛx zone, but with fiber optics.
Scheda
Dati:


APP N° 109

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a welding line on a metal ring
The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around.
Scheda
Dati:


APP N° 108

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
Scheda
Dati:


APP N° 107

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Pin width control of electrical components
The width of the pins of an electrical component should be controlled.
Scheda
Dati:


APP N° 106

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Pin height control of electrical components
The height of the pins of an electrical component should be controlled during the production.
Scheda
Dati:


APP N° 105

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Pharmacy (Pharmazie)   
Spray jet amount control
The density of the spray jet should be controlled.
Scheda
Dati:


APP N° 104

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Inline diameter control of wooden staff
During the production of wooden staff the diameter must be controlled while the rod is moved.
Scheda
Dati:


APP N° 103

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.
Scheda
Dati:


APP N° 102

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Spiral position control on a filament
The position of the spiral coil on a filament for the light bulb industry must be controlled. There are two different types of spirals, different in gapping, on the filament. The speed of the filament is approximately 0.02m/s, the diameter of the filament is dependent of the type (min. 0.3mm and max. 1.5mm) and the maximum gapping of the spiral is 1mm.
Scheda
Dati:


APP N° 101

Glass Industry (Glasindustrie)   
Pharmacy (Pharmazie)   
Spray-jet control during the glass bottle coating process in the pharmaceutical industry
During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade.
Scheda
Dati:


APP N° 100

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Gloss inline measurement after the varnish of doors
Immediately after the varnish of the doors the gloss factor should be controlled. Tests have shown that the amount of varnish, which will be sprayed onto the door surface, influences the gloss factor. If not enough varnish is used the surface becomes rough.
Scheda
Dati:


APP N° 99

Automotive Industry (Automobilindustrie)   
Color gloss differentiation of door interior components
Different colored interior parts must be differentiated. The color differences between the respective components are relatively small but there is a good difference in the gloss factor due to the different structure of the part.
Scheda
Dati:


APP N° 98

Environmental Technology (Umwelttechnik)   
Oil containing waste water detection
On an oil press the amount of oil in the waste water must be controlled. Typical values are 500ppm of flux oil in the waste water and the goal is to reach the 100ppm. At this the fluorescent effect of the flux oil can be used.
Scheda
Dati:


APP N° 97

Automotive Industry (Automobilindustrie)   
Presence control of felt textile on dashboard components
On dashboard instruments the presence of felt must be controlled furthermore two felts must be differentiated.
Scheda
Dati:


APP N° 96

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
Scheda
Dati:


APP N° 95

Packaging Industry (Verpackungsindustrie)   
Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.
Scheda
Dati:


APP N° 94

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.
Scheda
Dati:


APP N° 93

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Differentiation of chrome plated shiny and chrome plated matt components
Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end.
Scheda
Dati:


APP N° 92

Synthetic Industry (Kunststoffindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Color differentiation of syringe capsules
Syringe capsules must be color differentiated. At this, there should be detected also an unacceptable color change from batch to batch of the same capsule type.
Scheda
Dati:


APP N° 91

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Differentiation of a unicolor and a bicolor cable
During the production of cables a differentiation between unicolor and bicolor cable is necessary. The production maximum speed of the cable is approximately 15m/s and the diameter of the smallest cable is around 1.35mm. The cable is rotating around the axis in 0.5 seconds 360° at this velocity. The color stripe of the bicolor cable has a width of about 0.8mm.
Scheda
Dati:


APP N° 90

Packaging Industry (Verpackungsindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.
Scheda
Dati:


APP N° 89

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color mark detection on a paper banderole
A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark.
Scheda
Dati:


APP N° 88

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Fluorescent glue control on an abrasive belt
During the production of abrasive belt material with a 10mm wide glue stripe the presence of the fluorescent glue must be observed. Defects greater than 2mm in length must be proper detected. The distance of the sensor head to the object should be approximately 20mm and the detecting range around 2mm x 10mm.
Scheda
Dati:


APP N° 87

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Inline gloss measurement on abrasive belts
The gloss factor is a significant parameter for the surface quality, the roughness, of an abrasive belt. Thus a gloss measurement inline sensor should be used for quality control of the abrasive surface.
Scheda
Dati:


APP N° 86

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Differentiation of different colored plastic parts with different number of bars
Plastic parts with four (the bar located in the middle is shorter) and five long bars must be distinguished independent of the color.
Scheda
Dati:


APP N° 85

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
Scheda
Dati:


APP N° 84

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Color differentiation between a black and an uncoated metal gear wheel
A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter.
Scheda
Dati:


APP N° 83

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Differentiation of threads on an airbag textile
Different colored threads must be differentiated. At this, the treads can be also bicolored.
Scheda
Dati:


APP N° 82

Automotive Industry (Automobilindustrie)   
Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
Scheda
Dati:


APP N° 81

Automotive Industry (Automobilindustrie)   
V-belt position control
The lateral displacement of a V-belt in a V-belt pulley must be controlled, because it happens that the V-Belt lies not properly in the V-belt pulley.
Scheda
Dati:


APP N° 80

Automotive Industry (Automobilindustrie)   
Color differentiation of interior equipment
In the automotive industry different interior parts (wooden as well as plastic and metal elements) must be differentiated. Some wooden and plastic elements are very glossy whereas other components are diffuse.
Scheda
Dati:


APP N° 79

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Differentiation of ball bearings
Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm.
Scheda
Dati:


APP N° 78

Packaging Industry (Verpackungsindustrie)   
Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.
Scheda
Dati:


APP N° 77

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Edge control of abrasive belts
The edges of abrasive belts must be grinded to a certain degree. Thus, the degree of grinding should be controlled.
Scheda
Dati:


APP N° 76

Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.
Scheda
Dati:


APP N° 75

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color mark detection for side and longitudinal register control in the printing industry
In the web offset printing trapezoid like color marks will be used for the side register as well as the longitudinal register control. For each color a color mark is used, at which all color marks will be synchronized to the black color mark.
Scheda
Dati:


APP N° 74

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Inline gloss measurement of plastic films and laminated plates
During the production of plastic films as well as of laminated plates the gloss factor should be measured.
Scheda
Dati:


APP N° 73

Environmental Technology (Umwelttechnik)   
Color differentiation of solar photo cells
The blue color of solar photo cells can differ due to the production process from factory to factory and even from line to line in the same factory. Thus, the color of the solar photo cells should be controlled.
Scheda
Dati:


APP N° 72

Packaging Industry (Verpackungsindustrie)   
Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
Scheda
Dati:


APP N° 71

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Synthetic Industry (Kunststoffindustrie)   
Optical transparent plastic foil position control
The position of an optical transparent plastic film should be controlled in a range of approximately 50mm.
Scheda
Dati:


APP N° 70

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of an engraving mark on a metal plate
An engraving mark which is used for positioning in x-, y- and roll-direction has to be detected.
Scheda
Dati:


APP N° 69

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Paper edge position control
The position of the edge of a paper line must be controlled in a range of 50mm. The system should deliver an analogue signal (0V … +10V) which is proportional to the position of the edge of the paper.
Scheda
Dati:


APP N° 68

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Fluorescence stripe detection on newspapers
Newspapers with quality defects will be marked with a fluorescence stripe. These newspapers must be automatically detected and rejected from the normal product stream.
Scheda
Dati:


APP N° 67

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Inline gloss control in the furniture industry
During the manufacturing process of doors just after the painting line the amount of color must be controlled.
Scheda
Dati:


APP N° 66

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color monitoring in the furniture industry
During the manufacturing process of doors the color must be controlled and monitored. At this the color will be sprayed with spray nozzles, which are mounted on a robot, onto the doors. Just after this process but before the drying process the color should be controlled.
Scheda
Dati:


APP N° 65

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Detection of a reference water mark on safety paper
The position of a reference water mark must be inline detected. During the printing process it is necessary to synchronize the consecutive registers to the reference water mark.
Scheda
Dati:


APP N° 64

Packaging Industry (Verpackungsindustrie)   
Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
Scheda
Dati:


APP N° 63

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Super fast detection of holographic reference marks in the printing industry
One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils.
Scheda
Dati:


APP N° 62

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Color control of tinted glass plates
During the assembling of cars the color of the glasses from the side door must be checked. It is only possible to control from one side and even an additional reflector cannot be used.
Scheda
Dati:


APP N° 61

Glass Industry (Glasindustrie)   
Color differentiation of tinted and colored glass plates
During the subsequent processing of glass plates the different tinted and colored glasses must be controlled and discerned.
Scheda
Dati:


APP N° 60

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color differentiation of fluorescent liquids and marks
Available fluorescent sensors so far detect only the intensity of a fluorescent object but not the color. Furthermore these sensors have a problem to detect very weak fluorescent objects or fluorescent objects at a distance more than 80mm and additionally they are sensitive against ambient light. For the purpose of fluorescent color mark detection a color sensor for fluorescent colors should be used.
Scheda
Dati:


APP N° 59

Glass Industry (Glasindustrie)   
Position measurement of a transparent glass plate
Glass handling machines must be informed not only about the distance of a glass plate but also about the edge position of a glass plate. However the detection of the edge of a transparent glass plate is not so easy, especially if there is nearly no phase on the edges. The direct reflection rate of visible light on a standard glass surface is normally approximately 4% and with the additional reflection of the second surface around 8% of the light will be reflected.
Scheda
Dati:


APP N° 58

Glass Industry (Glasindustrie)   
Distance measurement on transparent glass plates
During the handling process of glass plates the distance of the glass surface must be controlled. As during the beveling process the glass plate must be positioned in a way that the glass edges can be feed symmetrically into the abrasive block of the grinding machine, otherwise the phases on both sides of the glass plate are different. Due to the fact, that the glass surface delivers nearly no diffuse reflected light but only direct reflected light, a standard laser displacement sensor cannot be used.
Scheda
Dati:


APP N° 57

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Textile Industry (Textilindustrie)   
Detection of a fluorescent line on different colored foamed materials
A fluorescent line must be detected on different colored foamed materials.
Scheda
Dati:


APP N° 56

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Measurement of the height difference of holographic encoder disks
The height of holographic encoder disks must be controlled in a non contact way.
Scheda
Dati:


APP N° 55

Chemical Industry (Chemische Industrie)   
Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
Scheda
Dati:


APP N° 54

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Environmental Technology (Umwelttechnik)   
Soldering flux control during the selective flux application
Selective soldering in combination with selective flux application becomes more and more popular. Especially manufacturers of mixed assembled PCB boards benefit from this new technology. Only the areas which will be soldered will be covered from the soldering flux. To achieve this, a piezo nozzle is used to generate small flux droplets with a diameter of a few tenth of a millimeter. At this the scattering angle is very small which make sure, that the droplets strike only the scheduled area. The amount as well as the direction of the droplets should be controlled.
Scheda
Dati:


APP N° 53

Automotive Industry (Automobilindustrie)   
Color-gloss differentiation of leather and leather imitations in the automotive interior field
In the automotive interior field the different materials looks sometimes very similar. For a proper differentiation of the different products color-gloss detection should be used.
Scheda
Dati:


APP N° 52

Automotive Industry (Automobilindustrie)   
Differentiation of leather and leather imitations in the automotive interior field
Sometimes a color differentiation between interior materials with exactly the same color and the same gloss factor is not possible, even with the best color sensor. Thus another sensor must close this gap. Indeed the different materials may have the same color and the same gloss, but a different structure as shown in the photos.
Scheda
Dati:


APP N° 51

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Control of margined abrasive belts
Different sanding belts are equipped with a margin and this margin has to be controlled. The margin can be present on the sanding side of the abrasive belt or on the rear side. Furthermore the margin can be darker than the rear side but mostly it is brighter than the sanding surface. Nevertheless there is a sufficient difference in contrast between the margin and the rear side or the sanding side.
Scheda
Dati:


APP N° 50

Environmental Technology (Umwelttechnik)   
Color control of the presence or absence of the flux
During the assembling process of photovoltaic cells on a stringer machine the conduction band must be controlled in respect of the presence or absence of the soldering flux.
Scheda
Dati:


APP N° 49

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Control of the eccentricity of the shaft of an electrical tooth brush
The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled.
Scheda
Dati:


APP N° 48

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
Scheda
Dati:


APP N° 47

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color detection of fluorescent marks on wood plates
On wooden plates defects will be marked with a fluorescent marker. The fluorescent mark has normally a width of about 15mm and it can happen, that two of this marks lie 20 mm away of each other, but must be detected as two separate marks. Furthermore the fluorescent marks should be detected at a distance of 200 mm to the object and even a mark with a width of 5mm should be detected.
Scheda
Dati:


APP N° 46

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color mark detection on aluminum tubes
A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too.
Scheda
Dati:


APP N° 45

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
Scheda
Dati:


APP N° 44

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
Scheda
Dati:


APP N° 43

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
Scheda
Dati:


APP N° 42

Automotive Industry (Automobilindustrie)   
Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
Scheda
Dati:


APP N° 41

Automotive Industry (Automobilindustrie)   
Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
Scheda
Dati:


APP N° 40

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
Scheda
Dati:


APP N° 39

Automotive Industry (Automobilindustrie)   
Color control of the presence of an airbag label
On different positions in a car there are placed airbag warning notices. These labels are fluorescent in the green color range. The background, where the labels are placed, however, is slightly fluorescent in the blue color range.
Scheda
Dati:


APP N° 38

Automotive Industry (Automobilindustrie)   
Color gloss differentiation of leather and leather imitations in the automotive industry
In the automotive interior field components made of leather as well as of leather imitations are available. To avoid, that the wrong parts will be mounted a quality check with a color gloss sensor must be done.
Scheda
Dati:


APP N° 37

Automotive Industry (Automobilindustrie)   
Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
Scheda
Dati:


APP N° 36

Automotive Industry (Automobilindustrie)   
Color differentiation of leather imitations and textiles in the automotive interior field
Different leather imitations and textiles which are used especially for car doors, car seats and headliners must be controlled to avoid failures during the assembling.
Scheda
Dati:


APP N° 35

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
Scheda
Dati:


APP N° 34

Automotive Industry (Automobilindustrie)   
Color differentiation of leather and leather imitation (interior equipment)
Leather and leather imitations are used for the interior equipment in the automotive industry.
Scheda
Dati:


APP N° 33

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Determination of the number of airbag webs
The number of airbag webs should be detected on a reference background.
Scheda
Dati:


APP N° 32

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
Scheda
Dati:


APP N° 31

Automotive Industry (Automobilindustrie)   
Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
Scheda
Dati:


APP N° 30

Automotive Industry (Automobilindustrie)   
Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
Scheda
Dati:


APP N° 29

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.
Scheda
Dati:


APP N° 28

Packaging Industry (Verpackungsindustrie)   
Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.
Scheda
Dati:


APP N° 27

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.
Scheda
Dati:


APP N° 26

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Groove and gap detection on wire-wound armature
The gaps as well as the milled grooves on wire-wound armatures should be detected during the electronic balancing process. The maximum speed is around 2500 revolutions per minute.
Scheda
Dati:


APP N° 25

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of color marks on disposal diapers
Different color marks (different in color) should be detected with an inline sensor. The maximum production speed is 10 m/s.
Scheda
Dati:


APP N° 24

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Color and intensity control of fluorescent color marks during the production
The intensity of a printed fluorescent color should be controlled. At this, fluorescent color marks with different densities of color are present. Thus, the color as well as the intensity of the fluorescent color mark can be controlled.
Scheda
Dati:


APP N° 23

Environmental Technology (Umwelttechnik)   
Chemical Industry (Chemische Industrie)   
Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
Scheda
Dati:


APP N° 22

Glass Industry (Glasindustrie)   
Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.


APP N° 21

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Color signal recording and color signal monitoring
More and more users of the SPECTRO-3 color sensors are asking for a color monitoring and color recording software. The manufacturers of endless materials like plastic foils (e.g. furniture, paper and automotive industry) and the fabricators of laminated medium density fiberboards (MDF) needs an inline sensor system not only for a 100% - quality control but beyond that a system for color signal recording, which allows also to document data like product number, customer name or number, order number, operator name, time and date. Furthermore, the sensor system should inform the operator about the color trend of the product, thus possible countermeasures can be duly initiated.
Scheda
Dati:


APP N° 20

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Closure head color control
Different plastic closure heads should be color controlled.
Scheda
Dati:


APP N° 19

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Black ink mark control on metal tubes
On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient.
Scheda
Dati:


APP N° 18

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Lateral position control of conveyor belts in the wood and paper industry
In the wood industry (during the production e.g. of MDFs = medium density fiberboards) as well as in the paper industry, special conveyor belts are in use. The lateral position of the band material must be hold in a range of ±0.2mm, whereas the vertical position can change in the range of ±2mm. The material of the conveyor belt is either stainless steel or plastic fabric.
Scheda
Dati:


APP N° 17

Glass Industry (Glasindustrie)   
Pharmacy (Pharmazie)   
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
Scheda
Dati:


APP N° 16

Glass Industry (Glasindustrie)   
Detection of glossy regions on a matt-finished glass plate
During the production of matt-finished glass plates the matt-finished surface must be controlled particularly with regard to small glossy spot. The glossy domains which should be detected are starting with a diameter of approximately 3 mm.
Scheda
Dati:


APP N° 15

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Detection of pearlescent color strips on security papers
The position as well as the quality of pearlescent multi color strips on security paper should be controlled.
Scheda
Dati:


APP N° 14

Packaging Industry (Verpackungsindustrie)   
Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.
Scheda
Dati:


APP N° 13

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
Scheda
Dati:


APP N° 12

Automotive Industry (Automobilindustrie)   
Detection of two different colored threads on interior parts
The task is to distinguish properly between the two different colored threads (beige and gray).
Scheda
Dati:


APP N° 11

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Inline edge detection of a white label on a white diaper
During the assembly of diapers, the presence as well as the position of the label must be controlled.
Scheda
Dati:


APP N° 10

Automotive Industry (Automobilindustrie)   
Color control of two different seams on two different leather imitations
The task is to detect, whether the seam is present on the leather imitation or not. There are two different colored leather imitations, beige and gray and respectively a beige thread as well as a gray thread.
Scheda
Dati:


APP N° 9

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Detection of a welding line on a metal rod
The welding line must be detected during the rotation of a metal rod. It has to be taken into account, that there are scratches as well as rust on the metal surface.
Scheda
Dati:


APP N° 8

Automotive Industry (Automobilindustrie)   
Color control of ultrasonic sensor caps in the automotive industry during the integration process
During the assembling of the ultrasonic sensors into the bumpers the color of the ultrasonic sensor caps must be controlled.
Scheda
Dati:


APP N° 7

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
Scheda
Dati:


APP N° 6

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.
Scheda
Dati:


APP N° 5

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Veneer control during the door production
1. Detection of slightly burned veneer zones and veneer tear-off during the door production:
The veneer will be glued onto the mdf plate during the movement, however, if the process will be interrupted due to any reason, it can happen, that the hot air gun, which will be used normally to warm up the glue, scorches or burns the veneer surface slightly. Furthermore the color sensor should detect a veneer tear-off.
2. Differentiation between white glossy veneer and white matt veneer:
The task is to distinguish between white glossy and white matt veneer.
Scheda
Dati:


APP N° 4

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Detection of the presence of the fleece during the production of disposable diapers
During the production of disposable diapers the assembling of the fleece must be checked. The production speed is approximately up to 10m/s and the height of the diapers can slightly changing. Furthermore the color of the diaper as well as the color of the fleece is white but additionally to this the fleece is fluorescent in blue under the influence of UV light.
Scheda
Dati:


APP N° 3

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Textile Industry (Textilindustrie)   
Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
Scheda
Dati:


APP N° 2

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Textile Industry (Textilindustrie)   
Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
Scheda
Dati:


APP N° 1

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.



NOTIZIE

Partecipazione a fiere:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ Innovation Day Recycling
 •   SKZ Network Day
 •   SKZ Technology Day
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

più...


Comunicati stampa:

Calibrazione del colore in linea sui riciclati di plastica
(Sistemi di misurazione del colore in linea)

 
Test report on Inline color measurement of recyclates ()
(Sistema di misurazione del colore in linea)

più...


Libri bianchi:

Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
Checking the plastic type of recyclates and virgin material using NIR technology ()

più...


Nuove applicazioni:

Rilevamento di ammaccature e avvallamenti su strisce di trancia in metallo
(N° 801)
Distinzione di componenti in pelle, tessuto e plastica per interni
(N° 802)
Misurazione del colore di coperchi di plastica
(N° 803)

più...


GLOSSARIO: Cos'è ...
... la tensione superficiale?
... l’evaporazione dell’olio?
... la misurazione dello spessore
    dello strato di olio?

più...



Novità sui software:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

più...




FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP