N° 461
|
Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
|
|
N° 444
|
Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
|
|
N° 443
|
Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
|
|
N° 325
|
Braided hose wire absence and overstretch control
The presence of all wires inside a braided hose should be controlled. Furthermore it should be controlled, whether the hose is overstretched.
|
|
N° 202
|
Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
|
|
N° 115
|
Ytkontroll på kugghjul Kvalitetskontroll av metallytan på ett kugghjul ska utföras. Ytor med spår och repor detekteras från ett avstånd av ca 200 mm.
Quality control of the surface of a cone on a cogwheel
The surface of the cone on a cogwheel should be checked. The surface of a proper cone looks very homogeneous; the surface of a bad cogwheel shows grooves and scratches. For investigations the cogwheel can be turned around its axis. The distance from the sensor to the object should be around 200 mm.
|
|
N° 26
|
Groove and gap detection on wire-wound armature
The gaps as well as the milled grooves on wire-wound armatures should be detected during the electronic balancing process. The maximum speed is around 2500 revolutions per minute.
|
|
N° 22
|
Färgsortering av glasflaskor Efter rengöring av återvunna glasflaskor ska sortering göras efter färg. Glaset i flaskorna kan exempelvis vara grönt, brunt, gulgrönt, blått eller transparent.
Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.
|
|
N° 17
|
Särskiljning mellan transparenta och matta glasflaskor Inom glasindustrin ska flaskor för läkemedelsindustrin kontrolleras att de har ytbehandlats inuti och fått ett matt mjölkaktigt utseende.
Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
|
|
N° 12
|
Detektion av två olika färgade sömmar på läder Inom fordonsindustrin ska två olika färger på sytråd särskiljas mot läderytan.
Detection of two different colored threads on interior parts
The task is to distinguish properly between the two different colored threads (beige and gray).
|
|