Sensor Instruments
Entwicklungs- und Vertriebs GmbH
Schlinding 15
D-94169 Thurmansbang
Telefon +49 8544 9719-0
Telefax +49 8544 9719-13
info@sensorinstruments.de

Ejemplos prácticos de la utilización industrial


Seleccione un idioma:



Data
sheet:


APP N° 803

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik kapakların renk ölçümü
Plastik kapakların rengi ölçülecektir.

Plastic cap color measurement
The color of plastic caps should be measured.
Data
sheet:


APP N° 802

Automotive Industry (Automobilindustrie)   
Deri, tekstil ve plastik iç mekan bileşenlerinin ayırt edilmesi
Deri, tekstil ve plastik iç mekan bileşenleri ayırt edilecektir.

Differentiation of leather, fabric and synthetic interior components
Leather, fabric and plastic interior parts should be differentiated.
Data
sheet:


APP N° 801

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Metal zımba bantlarında çökme ve ezilmelerin algılanması
Metal zımba bantlarında çökme ve ezilmeler algılanacaktır.

Detection of dents and bumps on metal punching strips
Dents and bumps on metal punching strips should be detected.
Data
sheet:


APP N° 800

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
Zımba şeritlerinde deformasyonların algılanması
Zımba bantlarında deformasyonlar algılanacaktır.

Detection of deformations on stamping stripes
Deformations on stamping stripes should be detected.
Data
sheet:


APP N° 799

Synthetic Industry (Kunststoffindustrie)   
Param.:
Bir plastik bileşenin üzerindeki döküm reçinenin varlığının kontrolü
Bir plastik parçanın üzerindeki döküm reçinenin varlığı denetlenecektir.

Presence control of a potting compound on plastic components
The presence of a sealing compound on plastic components should be controlled.
Data
sheet:


APP N° 798

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Deri ve plastik iç mekan parçalarının ayırt edilmesi
Deri ve plastikten üretilmiş iç mekan parçaları ayırt edilecektir.

Differentiation of leather and plastic interior components
Leather and synthetic interior parts should be differentiated.
Data
sheet:


APP N° 797

Synthetic Industry (Kunststoffindustrie)   
Geri dönüştürülmüş malzemeden işlenmemiş plastiklerin renk kontrolü
Geri dönüştürülmüş malzemeden işlenmemiş plastikler renklerine ilişkin kontrol edilecektir.

Color control of preforms made of recyclates
Preforms made of recycled material should be color controlled.
Data
sheet:


APP N° 796

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Plastik tamponların uzak mesafeden renk ayırımı
Plastik tamponlar renkleri açısından uzak mesafeden ayırt edilecektir.

Color differentiation of rubber buffers from a distance
The color of rubber buffers should be controlled from a distance.


APP N° 795

Synthetic Industry (Kunststoffindustrie)   
Şeffaf bir streç folyonun kalınlık ölçümü
Optik olarak şeffaf bir streç folyonun kalınlığı belirlenecektir.

Translucent stretch film thickness measurement
The thickness of a translucent stretch film should be measured.
Data
sheet:


APP N° 794

Chemical Industry (Chemische Industrie)   
Çok ince yağ filmlerinin varlığının kontrolü
Çok ince bir yağ filminin varlığı (< 1µm) denetlenecektir.

Presence control of a very thin oil layer
The presence of a very thin oil layer (< 1µm) should be controlled.
Data
sheet:


APP N° 793

Synthetic Industry (Kunststoffindustrie)   
İşlenmemiş plastik şişelerin renk kontrolü
İşlenmemiş plastik şişelerin renkleri denetlenecektir.

Color control of preforms
The color of preforms should be controlled.
Data
sheet:


APP N° 792

Packaging Industry (Verpackungsindustrie)   
Kaplanmış alüminyum folyoların ön yüz / arka yüz ayırımı
Alüminyum folyoların kaplanmış ön yüzü arka yüzünden ayırt edilecektir.

Frontside-backside differentiation of coated aluminum foils
The coated front side of aluminum foils should be differentiated from the backside.
Data
sheet:


APP N° 791

Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
INI:
İlaç ambalajlarında şişeciklerin varlığının kontrolü
İlaç ambalajlarında cam şişeciklerin varlığı denetlenecektir.

Presence control of a flask inside a medicine pack
The presence of a flask inside a medicine pack should be controlled.
Data
sheet:


APP N° 790

Synthetic Industry (Kunststoffindustrie)   
INI:
Plastik zemin kaplamalarının parlaklık ölçümü
Plastik zemin kaplamalarının parlaklık derecesi ölçülecektir.

Gloss measurement of synthetic floorings
The gloss of plastic floors should be measured.
Data
sheet:


APP N° 789

Synthetic Industry (Kunststoffindustrie)   
Plastik folyoların kalınlık ölçümü
Plastik streç folyoların kalınlığı belirlenecektir.

Plastic film thickness measurement
The thickness of plastic stretch film should be measured.
Data
sheet:


APP N° 788

Synthetic Industry (Kunststoffindustrie)   
Param.:
Bir plastik yüzeyde yoğunluk farklarının algılanması
Bir plastik yüzey yoğunluk farklarına ve çizgilere ilişkin kontrol edilecektir.

Streak detection on a plastic surface
A plastic surface should be controlled regarding freedom from streaks and striae.
Data
sheet:


APP N° 787

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Elektrik motorlarının devir sayısı kontrolü
Elektrik motorlarının frekansı denetlenecektir.

Frequency control of electric motors
The frequency of electric motors should be controlled.
Data
sheet:


APP N° 786

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Püskürtme ışını kontrolü
Palsli, zayıf dozajlı bir püskürtme ışını denetlenecektir.

Spray jet control
A pulsed, weakly dosed spray jet should be controlled.
Data
sheet:


APP N° 785

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal sacların genişlik kontrolü
Hızlı hareket eden metal sacların genişliği ölçülecektir.

Width control of metal sheets
The width of very fast moved metal sheets should be measured.
Data
sheet:


APP N° 784

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Sarım prosesinde tel algılaması ve tel sayımı
Sarım prosesi esnasında tellerin varlığı ve sayısı denetlenecektir.

Wire detection and counting during the braiding process
Wires should be detected and counted during the braiding process.
Data
sheet:


APP N° 783

Packaging Industry (Verpackungsindustrie)   
Üst üste bindirilmiş, katlanmış kâğıt çuvalların ve üst üste bindirilmiş oluklu mukavvanın kenarlarının algılanması
Katlanmış ve üst üste bindirilmiş olarak taşınan kâğıt çuvalların ve üst üste bindirilmiş olarak yerleştirilmiş oluklu mukavvanın kenarları algılanacak ve sayılacaktır.

Edge detection on paper bags and corrugated boards
The edges on scaled transported and folded paper bags as well as corrugated boards should be detected and counted.
Data
sheet:


APP N° 782

Textile Industry (Textilindustrie)   
Param.:
Tekstil dokumaların dikiş yerlerinin algılanması
Teknik tekstil dokumaların dikiş yerleri algılanacaktır.

Seam detection on fabrics
The seam on technical fabrics should be detected.
Data
sheet:


APP N° 781

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Metal dokuma bantların ilmek kontrolü
Metal dokuma bantların ilmekleri kontrol edilecektir.

Mesh control on metal braided hoses
Meshes on metal braided hoses should be controlled.
Data
sheet:


APP N° 780

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Dokuma hortumların örgü kontrolü
Dokuma hortumların örgüleri kontrol edilecektir.

Meshes control on fabric hoses
The meshes of a braided hose should be controlled.
Data
sheet:


APP N° 779

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Boyalı metal sacların renk parlaklığının kontrolü
Boyalı metal saclar renk ve parlaklık açısından denetlenecektir.

Color-gloss control of lacquered metal sheets
Lacquered metal sheets should be controlled with regard to the color and gloss.
Data
sheet:


APP N° 778

Automotive Industry (Automobilindustrie)   
Deri ve plastik iç mekan bileşenlerinin ayırt edilmesi
Deri ve plastik iç mekan parçaları birbirinden ayırt edilecektir.

Differentiation of leather and synthetic interior components
Leather and plastics interior parts should be differentiated.
Data
sheet:


APP N° 777

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Döner testere disklerindeki hataların algılanması
Hasarlı döner testere diskleri algılanacaktır.

Defect recognition on saw blade discs
Defects on saw blade discs should be detected.
Data
sheet:


APP N° 776

Textile Industry (Textilindustrie)   
Havlularda uçların algılanması
Havluların uçları algılanacaktır.

Seam detection on towels
The seam on towels should be detected.
Data
sheet:


APP N° 775

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Gri halıların ayırt edilmesi
Gri halılar birbirinden ayırt edilecektir.

Grey carpet differentiation
Grey carpets should be differentiated.
Data
sheet:


APP N° 774

Synthetic Industry (Kunststoffindustrie)   
Plastik levhaların PET tarafıyla PE tarafının ayırt edilmesi
Plastik levhaların PET tarafı PE tarafından ayırt edilecektir.

Differentiation of PE and PET side of plastic plates
The PET side of plastic plates should be differentiated from the PE side.
Data
sheet:


APP N° 773

Packaging Industry (Verpackungsindustrie)   
Plastik kapaklarda şeffaf etiketlerin varlığının kontrol edilmesi
Plastik kapaklarda şeffaf etiketlerin varlığı denetlenecektir.

Presence control of transparent labels on plastic caps
The presence of transparent labels on plastic caps should be controlled.
Data
sheet:


APP N° 772

Textile Industry (Textilindustrie)   
Paspasların kalınlık ölçümü
Paspasların kalınlığı ölçülecektir.

Thickness control of abrasive carpets
The thickness of abrasive carpets should be measured.
Data
sheet:


APP N° 771

Packaging Industry (Verpackungsindustrie)   
Ahşap çubukların renk kontrolü
Ahşap çubukların renkleri denetlenecektir.

Color control of wooden sticks
The color of wooden sticks should be controlled.
Data
sheet:


APP N° 770

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Zımpara kâğıtlarının parlaklık ölçümü
Zımpara kâğıtlarının parlaklık faktörü belirlenecektir.

Gloss measurement of sandpapers
The gloss factor of sandpapers should be measured.
Data
sheet:


APP N° 769

Automotive Industry (Automobilindustrie)   
Param.:
Işık iletken çubukların renk kontrolü
Işık iletken çubukların renkleri denetlenecektir.

Color control of light pipes
The color of light pipes should be controlled.
Data
sheet:


APP N° 768

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Boyalı alüminyum levhaların renk ölçümü
Boyalı alüminyum sacların parlaklık derecesi belirlenecektir.

Color measurement of lacquered aluminum plates
The color of lacquered aluminum plates should be measured.
Data
sheet:


APP N° 767

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Boyalı alüminyum levhaların parlaklık ölçümü
Boyalı alüminyum sacların parlaklık derecesi belirlenecektir.

Gloss measurement of painted aluminum plates
The gloss factor of lacquered aluminum plates should be measured.
Data
sheet:


APP N° 766

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Dekoratif folyoların parlaklık ölçümü
Dekoratif folyoların parlaklık derecesi belirlenecektir.

Gloss measurement on decorative films
The gloss factor should be measured on different decorative films.
Data
sheet:


APP N° 765

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Işık geçirgen şeffaf plastik bantlarda renk işareti algılaması
Şeffaf plastik yapışkan bantların üzerindeki renk işaretleri algılanacaktır.

Color mark recognition on transparent plastic films
A color mark on a translucent synthetic tape should be recognized.
Data
sheet:


APP N° 764

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik parçaların konum kontrolü
Şeffaf plastik parçalarının konumunun doğruluğu denetlenecektir.

Synthetic component orientation control
The orientation of transparent plastic parts should be controlled.
Data
sheet:


APP N° 763

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Şeffaf yapışkan şeritlerdeki renk işareti algılaması
Şeffaf yapışkan şeritlerdeki renk işaretleri algılanacaktır.

Color mark detection on transparent plastic adhesive strips
Color marks should be detected on transparent synthetic glue strips.
Data
sheet:


APP N° 762

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Metal zımba parçaların konumsal denetimi
Metal zımba parçaların tam konumu kontrol edilecektir.

Position control of metal stamping parts
The position of metal stamping parts should be controlled.
Data
sheet:


APP N° 761

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Plastik tellerin renk ölçümü
Plastik tellerin rengi ölçülecektir.

Color measurement of synthetic wires
The color of synthetic wires should be measured.
Data
sheet:


APP N° 760

Automotive Industry (Automobilindustrie)   
Param.:
Plastik ve deri iç mekan bileşenlerinin ayırt edilmesi
Deri iç mekan parçaları plastik iç mekan parçalarından ayırt edilecektir.

Differentiation of interior leather and plastic parts
Interior leather and plastic parts should be differentiated.
Data
sheet:


APP N° 759

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Deri ve plastik iç mekan bileşenlerinin ayırt edilmesi
Deri iç mekan bileşenleri plastik iç mekan bileşenlerinden ayırt edilecektir.

Differentiation of leather and synthetic interior components
Leather interior components should be differentiated from synthetic interior components.
Data
sheet:


APP N° 758

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç mekan plastik bileşenlerinin ayırt edilmesi
İç mekan plastik bileşenleri ayırt edilecektir.

Differentiation of interior plastic components
Interior plastic parts should be differentiated.
Data
sheet:


APP N° 757

Automotive Industry (Automobilindustrie)   
Turbo şarj rotorlarının devir sayısı ölçümü
Turbo şarj rotorlarının frekansı kontrol edilecektir.

Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled.
Data
sheet:


APP N° 756

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Metalik arka planda bir metal bandın düşen veya yükselen kanadının algılanması
Sacların üzerindeki metal bantların düşen veya yükselen kanadı algılanacaktır.

Detection of a rising and falling edge of a metal stripe on metal sheet
A rising as well as a falling edge of a metal stripe on metal sheet should be detected.
Data
sheet:


APP N° 755

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
İç çap kontrolü vasıtasıyla cıvata somunlarının ayırt edilmesi
M8 ve M10 somunlar iç çaplarının ölçülmesi ile inline olarak ayırt edilecektir.

Inside diameter differentiation of threaded nuts
M8 and M10 screw-nuts should be inline differentiated by inner diameter measurement.
Data
sheet:


APP N° 754

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Dişli somunların iç çap kontrolü
Cıvata somunlarının iç çapları kontrol edilecektir.

Inner diameter control of screw-nuts
The inner diameter of screw-nuts should be measured.
Data
sheet:


APP N° 753

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Halat örme tesislerinde tel sayımı
Halat örme tesislerinde sarım prosesi esnasında tellerin sayısı sayılacaktır.

Wire counting on wire winding machines
The number of wires on a wire winding machine should be counted.
Data
sheet:


APP N° 752

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Perçin vidalarında yağın varlığının algılanması
Perçin vidalarında yağın mevcut olduğu kontrol edilecektir.

Detection of the presence of oil on rivet screws
The presence of oil on rivet screws should be detected.


APP N° 751

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal kalemlerde yağ filmi algılaması
Metal kalemlerde bir yağ filminin varlığı denetlenecektir.

Oil film detection on metal pins
An oil film on metal pins should be detected.
Data
sheet:


APP N° 750

Textile Industry (Textilindustrie)   
Param.:
Sarı boyalı pamuk ipliklerin renk ölçümü
Sarı renge boyalı pamuk ipliklerin rengi üretim esnasında ölçülecektir.

Color measurement of dyed yellow cotton strands
The color of cotton strands should be measured during the tinting process.
Data
sheet:


APP N° 749

Textile Industry (Textilindustrie)   
Param.:
INI:
Geri dönüşüm prosesinde tekstillerin renk ayırımı
Geri dönüşüm prosesinde tekstiller renklerine göre sınıflandırılacaktır.

Color separation of recycled textiles
During the recycling process textiles should be color separated.
Data
sheet:


APP N° 748

Automotive Industry (Automobilindustrie)   
Param.:
Plastik iç mekan parçalarının renk ayırımı
Plastik iç mekan parçaları renk olarak ayırt edilecektir.

Color differentiation of plastic interior components
Plastic interior parts should be differentiated.
Data
sheet:


APP N° 747

Automotive Industry (Automobilindustrie)   
İç mekandaki deri ve plastik parçaların ayırt edilmesi
Deri iç mekan parçaları plastik iç döşeme parçalarından ayırt edilecektir.

Differentiation of leather and leather imitation interior components
Leather interior components should be differentiated from plastic interior parts.
Data
sheet:


APP N° 746

Synthetic Industry (Kunststoffindustrie)   
Param.:
Farklı yüzeylere sahip plastik levhaların renk ölçümü
Düz, orta ve pürüzlü yüzeye sahip plastik plakalar renkleri itibarıyla ölçülecektir.

Color measurement of plastic plates with different structures
The color of plastic plates with a fine, middle and coarse surface should be measured.
Data
sheet:


APP N° 745

Textile Industry (Textilindustrie)   
Param.:
Polyester ipliklerin renk ölçümü
Polyester ipliklerin rengi ölçülecektir.

Color measurement of polyester thread
The color of polyester thread should be measured.
Data
sheet:


APP N° 744

Textile Industry (Textilindustrie)   
Param.:
Polyester dokumaların renk ölçümü
Polyester dokumaların rengi ölçülecektir.

Color measurement of polyester mesh
The color of polyester mesh should be measured.
Data
sheet:


APP N° 743

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Dönen fanların frekans ölçümü
Dönen fanların frekansı belirlenecektir.

Frequency measurement of rotating fans
The frequency of rotating blowers should be measured.
Data
sheet:


APP N° 742

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Testere demirlerinde renk işareti algılaması
Testere demirlerindeki renk işaretleri algılanacaktır.

Color mark detection on saw blades
Color marks should be detected on saw blades.
Data
sheet:


APP N° 741

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Metal vidaların renk işareti algılaması
Metal vidaların alın kısımlarındaki renk işaretleri algılanacaktır.

Color mark detection on metal screws
The color mark on metal screws should be detected.
Data
sheet:


APP N° 740

Synthetic Industry (Kunststoffindustrie)   
Param.:
Plastik bileşenlerde ön yüz / arka yüz ayırt edilmesi
Düz plastik parçaların arka yüzü ön yüzünden ayırt edilecektir.

Backside/frontside differentiation of synthetic parts
The backside should be differentiated from the frontside of flat synthetic components.
Data
sheet:


APP N° 739

Synthetic Industry (Kunststoffindustrie)   
Param.:
Plastik parçalarda ön yüz / arka yüz ayırt edilmesi
Düz plastik bileşenlerin ön yüzü arka yüzünden ayırt edilecektir.

Frontside and backside differentiation of a plastic part
The frontside of a flat plastic part should be differentiated from the backside.
Data
sheet:


APP N° 738

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigaralarda yapıştırma yeri algılaması
Sigaraların yapıştırma yeri algılanacaktır.

Detection of glue lines on cigarettes
The glue line on cigarettes should be detected.
Data
sheet:


APP N° 737

Packaging Industry (Verpackungsindustrie)   
Param.:
Teneke kutularda kaynak dikişi algılaması
Teneke kutuların kaynak dikişleri algılanacaktır.

Welding line detection of tin cans
The welding line on tin cans should be detected.
Data
sheet:


APP N° 736

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Açık gri ve siyah boyalı vida başlarının renk ayırımı
Gümüş renkli vida başları siyah kaplı vida başlarından ayırt edilecektir.

Differentiation of silver-colored screws from black coated screws
Silver-colored screws should be differentiated from black coated screws.
Data
sheet:


APP N° 735

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Kayar yatak yarım gövdelerin renk işareti algılaması
Kayar yatak yarım gövdelerin renk işaretleri algılanacaktır.

Color mark detection on slide bearings
The color mark on slide bearings should be detected.
Data
sheet:


APP N° 734

Automotive Industry (Automobilindustrie)   
Param.:
Deri ve PVC iç mekan bileşenlerinin ayırt edilmesi
Deri parçalar PVC parçalardan ayırt edilecektir.

Differentiation of leather from PVC interior components
Leather interior parts should be differentiated from PVC components.
Data
sheet:


APP N° 733

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal parçaların iç çapının ölçümü
Metal bileşenlerin iç çapları kontrol edilecektir.

Inner diameter measurement of metal components
The inner diameter of metal components should be measured.
Data
sheet:


APP N° 732

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Komşu iki laminat arasındaki boşluk algılanacaktır
Laminatlar arasındaki boşluk algılanacaktır.

Detection of a gap between vinyl layers
A gap between vinyl layers should be detected.
Data
sheet:


APP N° 731

Glass Industry (Glasindustrie)   
Düz camın (float cam) kalay tarafıyla alev tarafının ayırt edilmesi
Düz camlarda kalay tarafıyla alev tarafı ayırt edilecektir.

Differentiation of tin and air side of float glasses
The tin side should be differentiated from the air side of float glasses.
Data
sheet:


APP N° 730

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Textile Industry (Textilindustrie)   
İnce elyaf keçelerin elyaf yoğunluğu kontrolü
İnce elyaf keçelerin elyaf yoğunluğu denetlenecektir.

Fiber density control of fiber sheets
The density of fiber sheets should be controlled.
Data
sheet:


APP N° 729

Automotive Industry (Automobilindustrie)   
Yağ ve hava filtrelerinin katlarının sayısı sayılacaktır
Yağ ve hava filtrelerinin katlamaları algılanacaktır.

Counting of folds on oil and air filter mats
Folds of oil and air filter mats should be detected.
Data
sheet:


APP N° 728

Packaging Industry (Verpackungsindustrie)   
Param.:
Bir teneke kutunun kaynak dikişi belirlenecektir
Baskılı bir teneke kutunun kaynak dikişi algılanacaktır.

Detection of a welding line on a tin can
A welding line should be detected on a printed tin can.
Data
sheet:


APP N° 727

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Synthetic Industry (Kunststoffindustrie)   
Isı yalıtım plakalarının kalınlık ölçümü
Isı yalıtım plakalarının kalınlıkları INLINE olarak ölçülecektir.

Thickness measurement of thermal insulation panels
The thickness of thermal insulation panels should be measured INLINE.
Data
sheet:


APP N° 726

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal spiral yayların yüksekliği denetlenecektir
Metal spiral yayların yüksekliği ölçülecektir.

Metal spring height control
The height of metal springs should be measured.
Data
sheet:


APP N° 725

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Düz contaların kalınlık ölçümü
Düz contaların kalınlıkları ölçülecektir.

Thickness measurement of flat gaskets
The thickness of flat gaskets should be measured.
Data
sheet:


APP N° 724

Synthetic Industry (Kunststoffindustrie)   
Mavi ve sarı nüanslı berrak, şeffaf plastik parçaların renk ayırımı
Sarı nüanslı berrak plastik parçalar mavi nüanslı şeffaf plastik parçalardan ayırt edilecektir.

Differentiation of yellowish cast to bluish shade clear transparent plastic components
Clear bluish transparent plastic components should be differentiated from yellowish parts.
Data
sheet:


APP N° 723

Synthetic Industry (Kunststoffindustrie)   
Param.:
Berrak, şeffaf plastik parçaların renk ayırımı
Sarı nüanslı berrak plastik bileşenler mavi nüanslı parçalardan ayırt edilecektir.

Color differentiation of clear transparent plastic parts
A yellowish cast to a bluish shade of transparent clear plastic components should be detected.
Data
sheet:


APP N° 722

Synthetic Industry (Kunststoffindustrie)   
Param.:
Mavimsi ve sarımsı plastik bileşenlerin ayırt edilmesi
Mavi nüanslı beyaz plastik parçalar sarı nüanslı plastik parçalardan ayırt edilecektir.

Differentiation of bluish and yellowish colored plastic parts
Blueish colored plastic parts should be differentiated from yellowish colored plastic components.
Data
sheet:


APP N° 721

Automotive Industry (Automobilindustrie)   
Param.:
Otomotiv alanında mat ve parlak iç mekan bileşenlerinin ayırt edilmesi
Parlak ve mat iç mekan bileşenleri ayırt edilecektir.

Differentiation of shiny and matt automotive interior components
Matt and shiny interior components should be differentiated.
Data
sheet:


APP N° 720

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Ahşap levhalarda renk işareti algılaması
Ahşap levhalar üzerinde renk işaretleri algılanacaktır. Renk işaretleri burada yakl. 2 mm kalınlığındaki kırmızı, yeşil veya siyah çizgilerden meydana gelir.

Color mark detection on wood plates
Color marks on wood plates should be detected. It should be noted that the color marks are black, green or red lines with a width of around 2mm.
Data
sheet:


APP N° 719

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Paslanmaz çelik sacların yüzey kontrolü
Paslanmaz çelik sacların yüzeyi denetlenecektir.

Surface control of stainless-steel sheets
The surface of stainless-steel sheets should be controlled.
Data
sheet:


APP N° 718

Textile Industry (Textilindustrie)   
Halı taban dokumasında tutkal algılaması
Halı taban dokusunda tutkal tabakasının varlığı algılanacaktır.

Glue detection on carpet backing
The presence of glue should be controlled on carpet backing.
Data
sheet:


APP N° 717

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Alüminyum hortumlardaki katlanma izlerinin sayılması
Alüminyum hortumların üzerindeki katlanma izleri sayılacaktır. Burada, ilgili katlama izlerinin arasındaki mesafenin farklı olabileceği dikkate alınmalıdır.

Counting folds on aluminum tubes
Folds on aluminum tubes should be counted. It must be considered that the distance between the folds is not constant.
Data
sheet:


APP N° 716

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Şeffaf plastik kapakların sayılması
Işık geçirgen plastik kapaklar sayılacaktır.

Counting of transparent plastic lids
Transparent plastic lids should be counted.
Data
sheet:


APP N° 715

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Işık geçirgen plastik bardakların sayılması
Şeffaf plastik bardaklar sayılacaktır.

Counting of semitransparent plastic cups
Semitransparent plastic cups should be counted.
Data
sheet:


APP N° 714

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Tek yaprak sayımı
Üst üste binen ve konveyör bant üzerinde taşınan tek kâğıtlar sayılacaktır.

Single paper sheet counting
Single sheets imbricated and transported on a conveyor belt should be counted.
Data
sheet:


APP N° 713

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Şeffaf plastik kapların sayılması
Birbirine yakın konumlandırılan şeffaf plastik kaplar sayılacaktır.

Counting of transparent plastic boxes
Close lined up transparent plastic boxes should be counted.
Data
sheet:


APP N° 712

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Kâğıt çuvalların sayılması
Kâğıt çuvalların üretiminden hemen sonra konveyör bant üzerinde taşınan kâğıt çuvallar sayılacaktır. Burada bir yandan her bir kâğıt çuvalın bir çift kenara sahip olduğu ve diğer yandan kâğıt çuvalların birbirine mesafesinin ve dolayısıyla istif yüksekliğinin değişken olduğu dikkate alınmalıdır.

Counting of paper bags
Paper bags transported on a conveyor belt should be counted. It should be noted that there is a double edge on each bag. Furthermore, the transport height is changing, dependent of the degree of overlap of the respective bag.
Data
sheet:


APP N° 711

Chemical Industry (Chemische Industrie)   
Param.:
Sıvı boyaların izleme camlarının dışından renk kontrolü
Sıvı boyaların renkleri izleme camlarının dışından denetlenecektir. Burada cam plakaların yansıtmalı bir yüzeye sahip oldukları dikkate alınmalıdır.

Color checking of the paintwork through sight glasses
The color of liquid lacquers should be controlled in using sight glasses. It should be taken into account, that the sight glasses have a reflecting surface.
Data
sheet:


APP N° 710

Packaging Industry (Verpackungsindustrie)   
İstiflenmiş plastik kapakların sayılması
İstiflenmiş plastik kapaklar temassız olarak sayılacaktır.

Counting of stacked plastic lids
Stacked plastic lids should be counted.


APP N° 709

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Deri iç mekan bileşenlerinin ön yüz - arka yüz renk ayırımı
Deri iç mekan bileşenleri ön ve arka yüzü itibarıyla renk olarak ayırt edilecektir.

Backside–frontside color differentiation of leather interior components
Leather interior components should be color differentiated related to the backside–frontside.
Data
sheet:


APP N° 708

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Boyalı plastik bileşenlerin renklerinin ayırt edilmesi
Boyalı plastik bileşenler renk olarak ayırt edilecektir.

Color differentiation of painted plastic components
Lacquered plastic components should be color differentiated.
Data
sheet:


APP N° 707

Automotive Industry (Automobilindustrie)   
Param.:
Boyalı plastik parçaların renklerinin ayırt edilmesi
Onyx siyah boyalı plastik bileşenler siyah boyalı plastik parçalardan renk olarak ayırt edilecektir.

Color differentiation of lacquered plastic components
Painted onyx-black components should be differentiated from lacquered black components.
Data
sheet:


APP N° 706

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Farklı kahve türlerinin renk ayırımı
Farklı kahve türleri renk olarak ayırt edilecektir.

Color differentiation of different types of coffee
Different types of coffee should be distinguished by color.
Data
sheet:


APP N° 705

Textile Industry (Textilindustrie)   
Beyaz kâğıt etiketlerin ve beyaz sentetik pamuğun ayırt edilmesi
Beyaz kâğıt etiketleri beyaz sentetik pamuktan ayırt edilecektir.

Differentiation of white paper and white synthetic cotton
White paper should be differentiated from white synthetic cotton.
Data
sheet:


APP N° 704

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir paslanmaz çelik çubukta lazer gravürlü bir işaretin algılaması
Paslanmaz çelik çubuklarda lazer gravürlü işaretler algılanacaktır.

Detection of a laser-engraved mark on a stainless-steel rod
Laser-engraved marks on stainless steel rods should be detected.
Data
sheet:


APP N° 703

Automotive Industry (Automobilindustrie)   
Cam yıkama nozullarından gelen püskürtme ışınlarının konum ve açısının kontrolü
Cam yıkama nozullarından gelen püskürtme ışınlarının konumu ve çıkış açısı denetlenecektir. Yüksek kaliteli cam yıkama nozulları artık iki adet sabit, neredeyse paralel hizalanmış püskürtme ışınlarına ve bir açılı püskürtme ışınına sahiptir. Buna ilave olarak bununla ayrıca hem açılı püskürtme ışınının çıkış açısı hem de demet halindeki püskürtme ışınının püskürtme miktarı kontrol edilecektir.

Position and angle control of washer jets
The position and angle of washer jets should be controlled. High-end washer jets provide normally two near-collimated water jets with a rigid angle and a fan beam with a wide angle. The task of the measuring instrument is furthermore to control the opening angle of the fan beam as well as the amount of water in the near-collimated water jets.
Data
sheet:


APP N° 702

Packaging Industry (Verpackungsindustrie)   
Kâğıt ambalajlarda renk işaretinin algılanması
Kâğıt torbalardaki renk işaretleri algılanacaktır. Burada hem beyaz zemin üzerindeki siyah renk işaretlerinin hem de siyah üzerindeki beyaz renk işaretlerinin algılanmasına dikkat edilecektir.

Color mark detection on paper bags
Color marks on paper bags should be detected. Here, it should be taken into account, that black color marks on a white background and white color marks on a black background should be detected.
Data
sheet:


APP N° 701

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Lazer kaynağı proses kontrolü
Lazer kaynağı esnasında lazer kaynağı prosesi tarafından neden olunan ışık emisyonu renk ve yoğunluk açısından incelenecektir.

Laser welding process control
During the laser welding the color as well as the intensity of the emitted light, caused by the laser welding, should be controlled.
Data
sheet:


APP N° 700

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
Eloksallı alüminyum parçaların renk ölçümü
Eloksallı alüminyum bileşenlerin renkleri ölçülecektir.

Color measurement of anodized aluminum parts
The color of anodized aluminum parts should be measured.
Data
sheet:


APP N° 699

Synthetic Industry (Kunststoffindustrie)   
Plastik plakacıkların UVA transmisyon ölçümü
UVA aralığındaki ışık geçirgenlik özellikleri ölçülecektir.

UVA transmittance of plastic plates
The UVA transmittance of plastic plates should be measured.
Data
sheet:


APP N° 698

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Yalıtım plakalarının mesafe ölçümü
Yalıtım plakalarına mesafe ölçülecektir.

Distance measurement to insulation panels
The distance to insulation panels should be measured.
Data
sheet:


APP N° 697

Automotive Industry (Automobilindustrie)   
Pleksiglas yan camların mesafe ölçümü
Plastik yan camlara mesafe ölçülecektir.

Distance measurement of plastic side windows
The distance to plastic side windows should be measured.
Data
sheet:


APP N° 696

Automotive Industry (Automobilindustrie)   
İç mekân alanı için siyah ve kahverengi plastik bileşenlerin renk ayırımı
Kahverengi imitasyon deriler siyah renkli imitasyon derilerden ayırt edilecektir.

Color differentiation of black and brown interieur plastic components
Black and brown interior plastic parts should be color differentiated.
Data
sheet:


APP N° 695

Automotive Industry (Automobilindustrie)   
Param.:
İç mekân alanındaki imitasyon derinin parlaklık ölçümü
Plastikten deri imitasyonlarının parlaklığı belirlenecektir.

Gloss measurement of leather imitations
The gloss of leather interior imitations should be measured.
Data
sheet:


APP N° 694

Textile Industry (Textilindustrie)   
Param.:
INI:
İplik bobinlerinin renk floresans kontrolü
İplik bobinleri renk floresansına göre ayırt edilecektir.

Fluorescence color control of yarn bobbins
The fluorescence color of yarn bobbins should be controlled.
Data
sheet:


APP N° 693

Agriculture (Agrarwirtschaft)   
Param.:
INI:
Mısır taneciklerinin konumlarının doğru olup olmadığının denetlenmesi
Mısır taneciklerinin hizalanması kontrol edilecektir.

Orientation control of maize kernels
During the corn handling, the orientation of maize kernels should be controlled.
Data
sheet:


APP N° 692

Packaging Industry (Verpackungsindustrie)   
Sigara kutularındaki yırtma şeridinin varlığının kontrolü
Sigara kutularındaki yırtma şeridinin varlığı denetlenecektir.

Tear-off strip presence control on cigarette-boxes
The presence of tear-off strips should be controlled on cigarette boxes.
Data
sheet:


APP N° 691

Packaging Industry (Verpackungsindustrie)   
Param.:
Metal folyoların üzerindeki renk işaretlerinin algılanması
Farklı renk işaretleri farklı renklerdeki metal folyolar üzerinde algılanacaktır.

Color mark detection on metal foil
Different color-marks should be detected on different colored metal foils.
Data
sheet:


APP N° 690

Packaging Industry (Verpackungsindustrie)   
Bir alüminyum folyoya uygulanmış bir yapıştırıcı izindeki boşlukların algılanması
Bir alüminyum folyo üzerindeki yapıştırıcı izindeki 5 mm x 1 mm boyutunun üzerindeki boşluklar algılanacaktır.

Detection of a gap in a glue film on an aluminum foil
A gap in the glue film should be detected on an aluminum foil. At this, gaps with the dimensions starting from 5mm x 1mm should be detected.
Data
sheet:


APP N° 689

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv endüstrisi için boyalı plastik bileşenlerin renk ayırımı
Otomotiv endüstrisi için boyalı plastik bileşenleri renklerine göre ayrılacaktır.

Color differentiation of plastic automotive components
Lacquered automotive plastic components should be color differentiated.
Data
sheet:


APP N° 688

Packaging Industry (Verpackungsindustrie)   
Sigara filtrelerinde yapışma yeri algılaması
Sigara filtrelerinin yapışma yerlerinin kalitesi denetlenmelidir.

Splice inspection of cigarette filters
The splices of cigarettes should be controlled.
Data
sheet:


APP N° 687

Packaging Industry (Verpackungsindustrie)   
Şeffaf etiketlerin varlığının kontrolü
Şeffaf etiketlerin varlığı denetlenecektir.

Presence control of transparent labels
The presence of transparent labels should be controlled.
Data
sheet:


APP N° 686

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Environmental Technology (Umwelttechnik)   
Param.:
INI:
Metal parçaların renk ayırımı
Metal partikülleri renklerine göre ayrılacaktır.

Color separation of metal parts
Metal parts should be separated depending on the color.
Data
sheet:


APP N° 685

Packaging Industry (Verpackungsindustrie)   
Plastik bantlarda yapıştırıcı tabaka kontrolü
Bir plastik bandın üzerindeki yapıştırıcı tabakasının kalınlığı denetlenecektir.

Glue thickness control on plastic tapes
The thickness of a glue layer on plastic tapes should be controlled.
Data
sheet:


APP N° 684

Synthetic Industry (Kunststoffindustrie)   
Koyu mavi plastik kapakların renk kontrolü
Koyu mavi plastik kapaklar renk toleransına uyum açısından kontrol edilecektir.

Color control of deep blue plastic covers
The color of blue plastic covers should be controlled, whether the respective cover is inside the tolerance range or not.
Data
sheet:


APP N° 683

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
INI:
Rotorlarda iki sacın üst üste binme yerinin ve ayrıca bir kaynak dikişinin olup olmadığının algılanması
Metal fanlarda kaynak dikişinin olup olmadığı kontrol edilecektir. Ayrıca bu iki sacın sadece üst üste mi bindiği yoksa kaynak mı yapıldığı kontrol edilecektir.

Detection of overlapped metal plates on metal fans and further whether the metal plates are welded
The presence of welding lines should be controlled on metal fans. Furthermore, it should be controlled, whether the overlapped metal plates are welded or not welded.
Data
sheet:


APP N° 682

Synthetic Industry (Kunststoffindustrie)   
Kaplanmış plastik folyo ile kaplanmamış plastik folyonun ayırt edilmesi
Kaplanmış bir plastik folyo kaplanmamış bir plastik folyodan ayırt edilecektir.

Differentiation of coated and uncoated plastic film
An uncoated plastic film should be distinguished from a coated plastic film.
Data
sheet:


APP N° 681

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Ampullerin renk ve parlaklık kontrolü
Filament ampullerin rengi ve parlaklığı denetlenecektir.

Color and intensity control of filament lamps
The color as well as the intensity of filaments lamps should be controlled.
Data
sheet:


APP N° 680

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal çubuklarla siyah karartılmış metal çubukların ayırt edilmesi
Siyah karartılmış metal çubuklar metal çubuklardan ayırt edilecektir.

Differentiation of black finished metal rod and metal rod
Black bronzed metal rods should be distinguished from metal rods.
Data
sheet:


APP N° 679

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal çubukların konumsal kontrolü
Metal çubukların doğru konumda olduğu denetlenecektir.

Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
Data
sheet:


APP N° 678

Automotive Industry (Automobilindustrie)   
Param.:
Parlak iç mekân pervazlarının boya kontrolü
Parlak iç mekân pervazlarının boya kalitesi denetlenecektir.

Lacquer quality control of shiny interior trims
The lacquer quality of shiny interior trims should be controlled.
Data
sheet:


APP N° 677

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Parlak iç mekân pervazlarının renk ayırımı
Parlak iç mekân pervazları renk olarak ayırt edilecektir. Buradaki zorluk, koyu renklerden açık renklere kadar uzanan yelpazedir.

Color differentiation of shiny interior trims
Shiny interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
Data
sheet:


APP N° 676

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Mat iç mekân pervazlarının renk ayırımı
Mat iç mekân pervazları renk olarak ayırt edilecektir. Buradaki zorluk, koyu renklerden açık renklere kadar uzanan yelpazedir.

Color differentiation of matt interior trims
Matt interior trims should be color differentiated. Here, the challenge is the range of colors, from dark to bright.
Data
sheet:


APP N° 675

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Hoparlör kapaklarının renk ayırımı
Hoparlör kapakları renklerine ilişkin ayırt edilecektir.

Color differentiation of loudspeaker covers
Loudspeaker covers should be color differentiated.


APP N° 674

Packaging Industry (Verpackungsindustrie)   
INI:
Metal kapakların sayılması
Bir istifteki metal kapaklar sayılacaktır.

Counting of metal lids
Metal lids should be counted in a stack.
Data
sheet:


APP N° 673

Chemical Industry (Chemische Industrie)   
Lazerli geçen ışık sistemi vasıtasıyla püskürtme ışını kontrolü
Püskürtme ışınının miktarı ve püskürtme ışını geometrisi püskürtme nozulu çıkışının hemen yakınından denetlenecektir.

Spray jet control with a laser through beam system
The amount of liquid and the geometry of a spray jet next to the spray nozzle should be controlled.
Data
sheet:


APP N° 672

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Beyaz bir plastik kabın üzerinde floresanslı yarı şeffaf bir kapağın varlığının kontrolü
Bir plastik kutunun üzerinde floresanslı yarı şeffaf bir kapağın varlığı kontrol edilecektir.

Presence control of a fluorescent semitransparent cover on a white plastic box
The presence of a fluorescent semitransparent cover should be controlled.
Data
sheet:


APP N° 671

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
Halıların ön yüzlerinin ve arka yüzlerinin algılanması
Halıların ön yüzü arka yüzünden ayırt edilecektir.

Backside-, frontside detection of carpets
The backside from a carpet should be differentiated from the frontside.
Data
sheet:


APP N° 670

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara filtre kağıdının üzerinde yapışkan izlerinin algılanması
Sigara filtre kağıdının üzerinde bir yapıştırıcı izi algılanacaktır. Burada dikkate alınması gereken husus, yapıştırıcının suda çözünür olmasıdır.

Glue line detection on cigarette filter paper
A glue line should be detected on cigarette filter paper. It should be noted, that the solvent used for the glue is water based.
Data
sheet:


APP N° 669

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara filtrelerinin içindeki farklı renk kapsülleri algılanacaktır
Farklı renklere boyanmış kapsüller bir sigara filtresi çubuğunun içinde algılanacaktır.

Color differentiation of capsules inside cigarette filters
Different colored capsules inside cigarette filters should be detected.


APP N° 668

Automotive Industry (Automobilindustrie)   
Param.:
Otomotiv alanında iç mekân parçalarının floresans ayırımı
Otomotiv alanında iç mekân bileşenleri, floresans vasıtasıyla birbirinden ayırt edilecektir.

Color-fluorescence differentiation of interior automotive components
Interior automotive parts should be color differentiated.
Data
sheet:


APP N° 667

Automotive Industry (Automobilindustrie)   
Param.:
Deri iç mekân parçalarının renk ayırımı
Otomotiv iç mekân alanından bileşenler renklerine ilişkin ayırt edilecektir.

Color differentiation of leather interior components
Leather interior parts used in the automotive area should be color differentiated.
Data
sheet:


APP N° 666

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Siyah lamine kâğıt tabakalarının ön yüz / arka yüz algılaması
Siyah lamine edilmiş kâğıt tabakalarının doğru konumu algılanacaktır. Burada dikkate alınması gereken husus, ön yüzün kabartmalı dikdörtgen bir desene sahip olduğudur.

Frontside / backside detection of black laminated paper sheets
The correct direction of black laminated paper sheets should be detected. It should be noted, that the frontside is slightly marked with a rectangular pattern.
Data
sheet:


APP N° 665

Glass Industry (Glasindustrie)   
Cam şişelerde rölyef algılaması
Farklı cam şişelerdeki rölyefler algılanacaktır.

Relief detection on glass bottles
Reliefs on different glass bottles should be detected.
Data
sheet:


APP N° 664

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Dişli çark ayırımı
Kimyasal işlem görmemiş dişli çarklar karartılmış dişli çarklardan ayırt edilecektir.

Gear differentiation
Chemically non-treated gears should be distinguished from blackened gears.
Data
sheet:


APP N° 663

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Floresanslı bir baskı görüntüsünün varlığının kontrolü
Floresanslı bir baskı görüntüsünün varlığı denetlenecektir.

Fluorescent print presence control
The presence of a fluorescent print on plastic film should be controlled.
Data
sheet:


APP N° 662

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
Çok zayıf püskürtme ışınlarının kontrolü
Oldukça zayıf bir püskürtme ışınının hem varlığı hem de yoğunluğu denetlenecektir.

Ultra-low spray jet control
The presence as well as the density of an ultra-low spray jet should be controlled.
Data
sheet:


APP N° 661

Automotive Industry (Automobilindustrie)   
Bir grafit matın kalınlığının ölçümü
Bir grafit dokumanın kalınlığı tespit edilecektir

Graphite fabric thickness measurement
The thickness of a graphite fabric should be measured.
Data
sheet:


APP N° 660

Automotive Industry (Automobilindustrie)   
Param.:
Bir paslanmaz çelik boruda kaynak dikişinin algılanması
Bir paslanmaz çelik kovandaki kaynak dikişi dönme esnasında algılanacaktır.

Welding line detection on stainless steel tubes
The welding line on stainless-steel tubes should be detected. At this, the stainless-steel tube is rotating.
Data
sheet:


APP N° 659

Automotive Industry (Automobilindustrie)   
Farklı primerlerin algılanması
Floresanslı farklı primerler tespit edilecektir. Burada dikkat edilmesi gereken husus, primerlerin siyah yüzey üzerine uygulandığıdır.

Detection of different primers
Different, fluorescent primers should be detected. Here, the primers will be applied on a black surface.
Data
sheet:


APP N° 658

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Zımba şeritlerinde yağ filmi algılaması
Zımba şeritlerinde yağ tabakalarının mevcut olduğu algılanacaktır. Özellikle zımba şeritlerin yıkama işleminden sonra bunların üzerindeki yağlama maddesi artıkları tespit edilecektir.

Oil film detection on metal stamping stripes
The presence of an oil film on metal stripes should be detected. Especially after the cleaning process remaining residues of lubricants must be recognized.
Data
sheet:


APP N° 657

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Şeffaf plastik kovaların içindeki yarı şeffaf bilyelerin renk ayırımı
Filtre çubuklarının içinde şeffaf kısımlarda bulunan yarı şeffaf renkli bilyelerin renkleri ayırt edilecektir.

Color differentiation of balls in transparent plastic film tubes
Semitransparent colored balls, located in the transparent plastic tube sections of filter rods should be color differentiated.
Data
sheet:


APP N° 656

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Şeffaf plastik kovaların içindeki yarı şeffaf bilyelerin renk kontrolü
Filtre çubuklarının içinde şeffaf plastik kovan kesimlerinde bulunan yarı şeffaf renkli bilyeler, renklerine ilişkin denetlenecektir.

Color controls of balls in transparent plastic tubes
Semitransparent but colored balls located in transparent plastic film sections of a filter tube should be color controlled.
Data
sheet:


APP N° 655

Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
UV ışık altında floresanslı, optik olarak şeffaf bir plastik filmin üzerindeki şeffaf bir yapıştırıcı tabakasının kalınlık ölçümü
UV etkisi altında floresanslı şeffaf bir plastik folyo üzerindeki şeffaf bir yapıştırıcının tabaka kalınlığı ölçülecektir.

Thickness control of a transparent adhesive layer on a UV fluorescent transparent plastic film
The thickness of a transparent glue on a transparent but fluorescent plastic film should be measured.
Data
sheet:


APP N° 654

Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Siyah deri üzerinde floresanslı bir kaplamanın algılanması
Siyah bir deri yüzeyin floresanslı bir kaplamasının üzerindeki 5 mm’lik boşluk algılanacaktır.

Detection of fluorescent coating on black leather
A gap with a width of 5mm in the fluorescent coating on a black leather surface should be detected.
Data
sheet:


APP N° 653

Provisions Industry (Lebensmittelindustrie)   
Yaprakların kalitesinin değerlendirilmesi
Yaprakların kalitesi floresans davranışı vasıtasıyla tespit edilecektir.

Evaluation of the quality of leaves
The quality of leaves should be evaluated in using the fluorescent effect.
Data
sheet:


APP N° 652

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
Plastik bileşenlerde yapıştırıcı izi varlığı kontrolü
Siyah bir plastik yüzeyin üzerindeki yapıştırıcı izinin varlığı denetlenecektir.

Glue bead presence control on plastic components
The presence of adhesive on black plastic parts should be controlled.
Data
sheet:


APP N° 651

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Bir plastik yüzeyin üzerindeki primer tabakanın varlığının kontrolü
Bir plastik bileşenin üzerindeki primer tabakanın varlığı denetlenecektir.

Presence control of a primer layer on a plastic component
A primer layer on a plastic surface should be detected.
Data
sheet:


APP N° 650

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metalden mamul kaynaklı bir düz borunun konumsal kontrolü
Düz borulardaki kaynak dikişinin konumu denetlenecektir. Burada dikkat edilmesi gereken husus, kaynak dikişinin altta olması gerektiğidir.

Correct positioning control of welded flat metal tubes
The position of a welding line on a flat tube should be controlled. At this, the welding line should be underneath.
Data
sheet:


APP N° 649

Automotive Industry (Automobilindustrie)   
Boyalı otomobil bileşenlerinin renk kontrolü
Boyalı otomobil parçaları renk kontrolüne tabi tutulacaktır. Burada renk olarak sapma gösteren bileşenler doğru parçalardan ayrılacaktır.

Color control of automotive paints
Automotive paints should be color differentiated. At this, the correct parts should be separated from the incorrect parts.
Data
sheet:


APP N° 648

Automotive Industry (Automobilindustrie)   
Param.:
Otomobil boyalarının renk ölçümü
Burada, ilgili otomobil boyasının renk değerinin buna ilişkin referans rengin izin verilen tolerans aralığının dE içinde olup olmadığı kontrol edilecektir.

Color measurement of car paints
The color of car paints should be measured and controlled whether the respective color is inside a certain dE tolerance to the corresponding reference.
Data
sheet:


APP N° 647

Glass Industry (Glasindustrie)   
Param.:
INI:
Cam plakaların renk ölçümü
Cam plakaların rengi ölçülecektir, burada boyalı bulanık cam tabakasının şeffaf ve parlayan bir cam tabakasıyla kaplı olduğu dikkate alınmalıdır. Uygulamada rengi ölçümü ancak şeffaf cam tabakasının ardından gerçekleştirilebilir ve bu esnada doğrudan yansımanın ölçüm sonucu üzerindeki etkisi önlenmelidir.

Color measurement of glass plates
The color of glass plates should be measured. It should be noted, that the colored opaque glass layer is covered from a transparent shiny glass layer and the color should be measured through the transparent glass layer. The challenge is, to avoid that the direct reflection from the surface of the transparent glass layer is influencing the color measurement result.
Data
sheet:


APP N° 646

Packaging Industry (Verpackungsindustrie)   
Param.:
Baskılı bir alüminyum folyo üzerinde referans renk işaretinin algılanması
Siyah mat alüminyum folyo üzerinde siyah parlayan renk işaretleri ve turuncu zemin üzerinde doygun turuncu referans işaretleri algılanacaktır.

Color mark detection on aluminum foil
Black shiny color marks on a black matt aluminum foil and dark orange marks on an orange background should be detected.
Data
sheet:


APP N° 645

Packaging Industry (Verpackungsindustrie)   
Param.:
Bir alüminyum folyo üzerinde renk referans işaretinin algılanması
Bir alüminyum folyo üzerindeki renk işareti algılanacaktır.

Detection of a color mark on an aluminum foil
Color marks on an aluminum foil should be detected.


APP N° 644

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv alanında iç mekân bileşenlerinin ayırt edilmesi
Otomotiv alanındaki muhtelif iç mekân parçaları ayırt edilecektir.

Differentiation of automotive interior components
Automotive interior components should be differentiated.
Data
sheet:


APP N° 643

Synthetic Industry (Kunststoffindustrie)   
Plastik bantlarda düğüm kontrolü
Plastik bantlar düğümlere ilişkin kontrol edilecektir.

Knot detection on plastic straps
Knots in plastic straps should be inline detected.
Data
sheet:


APP N° 642

Automotive Industry (Automobilindustrie)   
Cam plakalar üzerinde kaplama kontrolü
Cam plakaların kaplaması denetlenecektir.

Coating control on glass plates
The different coatings on glass plates should be color controlled.
Data
sheet:


APP N° 641

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Paslanmaz çelik borulardaki kaynak dikişinin inline kontrolü
Paslanmaz çelik borularda kaynak dikişindeki hatalar inline olarak algılanacaktır. Burada paslanmaz çelik boru kaynak dikişi boyunca hareket ettirilir.

Inline-control of welding line on stainless steel tubes
A welding line should be inline controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
Data
sheet:


APP N° 640

Automotive Industry (Automobilindustrie)   
Param.:
Paslanmaz çelik borularda kaynak dikişi hatasının algılanması
Paslanmaz çelik borularda kaynak dikişindeki hatalar algılanacaktır. Burada paslanmaz çelik boru kaynak dikişi boyunca hareket ettirilir.

Welding line control on stainless steel tubes
A welding line should be controlled on stainless steel tubes. At this, the tube will be shifted along the welding line.
Data
sheet:


APP N° 639

Automotive Industry (Automobilindustrie)   
Param.:
Paslanmaz çelik borularda kaynak dikişi algılaması
Paslanmaz çelik borularda kaynak dikişinin konumu algılanacaktır. Burada paslanmaz çelik boru döndürülebilir.

Welding line detection on stainless steel tubes
A welding line should be detected on stainless steel tubes. At this, the tube can be turned.


APP N° 638

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Süsleme pervazlarının renk kontrolü
Süsleme pervazları renklerine ilişkin kontrollü edilecektir.

Color control of trims
Trims should be color controlled.


APP N° 637

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Tekstil ve alkantara iç mekân bileşenlerinin ayırt edilmesi
Tekstil ve alkantara bileşenleri ayırt edilecektir.

Differentiation of fabric and alcantara interior components
Fabric and alcantara interior components should be differentiated.
Data
sheet:


APP N° 636

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Dikiz aynası gövdelerinin renk ayırımı
Dikiz aynası gövdelerinin renkleri kontrol edilecektir.

Color differentiation of rearview mirror housings
Rearview mirror housings should be color differentiated.
Data
sheet:


APP N° 635

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik kapakların konumsal doğruluğunun kontrolü
Plastik kapakların konumu (doğru veya baş aşağı) tespit edilecektir.

Direction control of plastic caps
The direction (upside or upside down) of plastic caps should be controlled.


APP N° 634

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Baskılı kâğıtlar üzerinde yapıştırıcı izi kontrolü
Baskılı kâğıtların üzerinde yapıştırıcı iznin varlığı, bunun miktarı ve hatalı olanları tespit edilecektir.

Glue line control on printed paper
The presence, amount and gaps of a glue line on printed paper should be detected.
Data
sheet:


APP N° 633

Environmental Technology (Umwelttechnik)   
Param.:
INI:
Filtre kağıdı üzerinde is miktarı ölçümü
Bir filtre kağıdının üzerindeki is miktarı belirlenecektir.

Soot quantity measurement on filter paper
The amount of soot on filter paper should be measured.
Data
sheet:


APP N° 632

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Eloksallı alüminyum boruların renk ayırımı
Eloksallı alüminyum borular renk olarak ayırt edilecektir.

Color differentiation of anodized aluminum tubes
Anodized aluminum tubes should be color differentiated.
Data
sheet:


APP N° 631

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Eloksallı alüminyum profillerin renk ayırımı
Eloksallı alüminyum profiller renk olarak ayırt edilecektir.

Color differentiation of anodized aluminum profiles
Anodized aluminum profiles should be color differentiated.
Data
sheet:


APP N° 630

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Eloksallı alüminyumun renk ayırımı
Eloksallı alüminyum parçalar ayırt edilecektir.

Color differentiation of anodized aluminum components
Anodized aluminum components should be color differentiated.
Data
sheet:


APP N° 629

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Kâğıt hatlarının ön yüzü ile arka yüzünün ayırt edilmesi
Bir sarı ve bir beyaz kâğıt hattının ön yüzü ile arka yüzü birbirinden ayırt edilecektir.

Front side – backside differentiation of paper web
The backside of yellow and white paper web should be differentiated from the respective front side.
Data
sheet:


APP N° 628

Packaging Industry (Verpackungsindustrie)   
Bir filtre kağıdının tek taraflı olarak yapıştırıcı kaplı ön yüzünün kaplı olmayan yüzünden ayırt edilmesi
Bir filtre kağıdının ön yüzünün mü yoksa arka yüzünün mü yukarıda olduğu kontrol edilecektir. Burada sadece ön yüz hafif floresanslı bir yapıştırıcı tabakasıyla kaplanmıştır.

Backside - front side differentiation from slightly fluorescent glue-coated filter paper
The slightly fluorescent front side glue-coated paper should be controlled, whether the backside or the front side is on top.
Data
sheet:


APP N° 627

Automotive Industry (Automobilindustrie)   
Beyaz ve metalik beyaz parçaların renk ayırımı
Beyaz boyalı parçalar metalik beyaz boyalı bileşenlerden ayırt edilecektir.

Color differentiation between white and metallic white lacquered parts
White painted parts should be differentiated from metallic white lacquered components.


APP N° 626

Chemical Industry (Chemische Industrie)   
Yağ emdirilmiş kâğıt içinde floresanslı katkı maddelerinin yoğunluk kontrolü
Yağ emdirilmiş kâğıt içinde floresanslı katkı maddelerinin yoğunluğu denetlenecektir.

Intensity control of fluorescent additives in oil-soaked paper
The intensity of fluorescent additives in oil-soaked paper should be controlled.
Data
sheet:


APP N° 625

Packaging Industry (Verpackungsindustrie)   
Metalize plastik kartlarda kertik algılaması
Metalize bir plastik kartın üzerindeki bir kertik algılanacaktır.

Slit detection in metalized plastic card
A slit in a metalized plastic card should be detected.
Data
sheet:


APP N° 624

Automotive Industry (Automobilindustrie)   
İç mekân bileşenlerinin renk ayırımı
Otomotiv alanındaki iç mekân parçaları ayırt edilecektir.

Color Differentiation of interior components
Automotive interior components should be color differentiated at a big distance.
Data
sheet:


APP N° 623

Synthetic Industry (Kunststoffindustrie)   
Bir plastik bandın üzerindeki floresanslı kaplamadaki boşluk algılanacaktır
Bir plastik bandın üzerinde bulunan UV ışık etkisi altında floresanslı bir kaplama boşluklara ilişkin incelenecektir.

Gap detection of fluorescent coating on plastic band
A gap inside fluorescent coating on a plastic ribbon should be detected.
Data
sheet:


APP N° 622

Textile Industry (Textilindustrie)   
Bir halı üzerindeki floresanslı bir dikişin algılanması
UV ışık etkisi altında floresanslı bir dikiş algılanacaktır.

Fluorescent thread detection on carpets
A fluorescent seam should be detected on carpet.
Data
sheet:


APP N° 621

Automotive Industry (Automobilindustrie)   
Ahşap ve karbon esaslı iç mekân bileşenlerinin ayırt edilmesi
Ahşap ve karbon elyaf iç mekân parçaları birbirinden ayırt edilecektir.

Differentiation of wooden and carbon based interior components
Wooden and carbon based interior components should be differentiated.
Data
sheet:


APP N° 620

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Paslanmaz çelik boruların renk kontrolü
Mavi renkli paslanmaz çelik borular boyalı olmayan borulardan ayırt edilecektir.

Color control of stainless steel tubes
Blue painted stainless steel tubes should be differentiated from uncolored tubes.
Data
sheet:


APP N° 619

Textile Industry (Textilindustrie)   
Tekstil kumaşların renk ölçümü
Yeşil ve zeytuni renkli tekstil kumaşlar renklerine ilişkin denetlenecektir.

Color measurement of fabrics
Green and olive fabrics should be color controlled.
Data
sheet:


APP N° 618

Automotive Industry (Automobilindustrie)   
Şeffaf plastik folyo kaplamanın arkasındaki dikişlerin renk ayırımı
Farklı renklerde dikişlere sahip bileşenler kontrol edilecektir.

Color differentiation of threads through shiny transparent plastic film
Components with different colored threads should be differentiated.


APP N° 617

Synthetic Industry (Kunststoffindustrie)   
Param.:
Plastik granüllerinin nem ölçümü
Plastik granüllerin su içeriği belirlenecektir.

Moisture control of plastic pellets
The very low water content of plastic pellets should be measured.
Data
sheet:


APP N° 616

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal spiral yayların renklerinin ayırt edilmesi
Metal spiral yaylar renklerine ilişkin ayırt edilecektir. Buradaki kontrol mesafesi 100 mm’den fazla olmayacaktır.

Color differentiation of metal springs
Metal springs should be color differentiated at a distance of 100mm.
Data
sheet:


APP N° 615

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv alanındaki iç mekân bileşenlerinin ayırt edilmesi
Otomotiv alanındaki iç mekân parçaları ayırt edilecektir.

Color differentiation of interior automotive components
Interior components should be color differentiated.


APP N° 614

Automotive Industry (Automobilindustrie)   
İç mekânda deri ve suni deri bileşenlerin ayırt edilmesi
İç mekândaki deri bileşenler suni deri bileşenlerden ayırt edilecektir.

Differentiation of leather and leather imitation interior parts
Leather interior parts should be differentiated from leather imitation interior components.
Data
sheet:


APP N° 613

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Renkli otomobil camlarının mesafe ölçümü
Otomobil camlarının mesafesi temassız bir ölçüm sistemiyle belirlenecektir. Burada dikkate alınması gereken husus, her bir ölçüm noktasının yerinin kısıtlı olmasıdır, çünkü camın mesafesi birden fazla noktada aynı anda ölçülecektir.

Distance measurement to colored car glass
The distance to colored car glass should be measured. It has to be taken into account, that due to the fact, that several measuring points at the glass surface are necessary, the space for the respective measurement device, especially the frontend is limited.
Data
sheet:


APP N° 612

Automotive Industry (Automobilindustrie)   
Boyalı bileşenlerin parlaklık ve yoğunluk farklarına ilişkin incelenmesi
Boyalı bileşenler parlaklık ve yoğunluk farklarına ilişkin kontrol edilecektir.

Investigation of lacquered components in regards to gloss and haze
Lacquered components should be controlled in regards to gloss and haze.
Data
sheet:


APP N° 611

Synthetic Industry (Kunststoffindustrie)   
İki adet farklı renge boyanmış şeffaf pleksiglas camın renk ölçümü
Hafif mavimsi ve hafif sarımsı renge boyanmış şeffaf akril camların rengi ölçülecektir.

Color measurement of two different colored transparent Plexiglas sheets
A slightly blueish and a slightly yellowish colored transparent acrylic glass sheet should be color measured.
Data
sheet:


APP N° 610

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
Bakır kaplı tellerin renk ölçümü
Bakır kaplı tellerin rengi ölçülecektir.

Color measurement of copper coated wires
The color of copper anodized wires should be measured.
Data
sheet:


APP N° 609

Synthetic Industry (Kunststoffindustrie)   
Param.:
Şeffaf plastik folyo üzerinde yapıştırıcı uygulanmış kenar takibi
Şeffaf plastik folyo üzerindeki yapıştırıcı izinin kenarı algılanacaktır.

Glue line edge tracing on transparent plastic film
The edge of a glue line on a transparent plastic film should be detected.
Data
sheet:


APP N° 608

Automotive Industry (Automobilindustrie)   
Param.:
Otomobil hoparlör kasalarının renk ayırımı
Otomobil hoparlör kasaları renklerine ilişkin ayırt edilecektir.

Color differentiation of automotive loudspeaker housings
The color of automotive loudspeaker housings should be controlled.
Data
sheet:


APP N° 607

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Sert kağıdın kabartma baskılı kenarını sürekli takibi
Sert kağıdın kabartma baskılı kademesi sürekli olarak algılanacaktır.

Continuous edge pursuit on embossed paper
The edge on embossed paper should be traced.
Data
sheet:


APP N° 606

Synthetic Industry (Kunststoffindustrie)   
Param.:
Yarı ışık geçirgen plastik parçaların renk ölçümü
Yarı ışık geçirgen plastik bileşenlerin rengi ölçülecektir.

Color measurement of semitransparent plastic parts
The color of semitransparent plastic components should be measured.
Data
sheet:


APP N° 605

Textile Industry (Textilindustrie)   
Param.:
Siyah - kırmızı desenli bir kumaşın renk ölçümü
Siyah - kırmızı desenli bir kumaşın rengi ölçülecektir.

Color measurement of red-black patterned fabrics
The color of red-black patterned fabrics should be measured.
Data
sheet:


APP N° 604

Textile Industry (Textilindustrie)   
Param.:
Gri mavi desenli bir kumaşın renk ölçümü
Gri mavi desenli bir kumaşın rengi ölçülecektir.

Color measurement of gray-blue fabrics
The color of gray-blue fabrics should be measured.
Data
sheet:


APP N° 603

Textile Industry (Textilindustrie)   
Param.:
Turuncu - siyah desenli bir kumaşın renk ölçümü
Turuncu - siyah desenli bir kumaşın rengi ölçülecektir.

Color measurement of orange fabrics
The color of orange – black patterned textiles should be measured.
Data
sheet:


APP N° 602

Synthetic Industry (Kunststoffindustrie)   
Param.:
Plastik parçalarda renk ölçümü
Plastik parçaların renkleri ölçülecektir.

Color measurement of plastic parts
The color of plastic parts should be measured.
Data
sheet:


APP N° 601

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Farklı bulanık metal parçaların ayırt edilmesi
Farklı yüzey bulanıklığına sahip metal parçalar algılanacaktır.

Differentiation of diverse hazy metal parts
Diverse hazy metal components should be differentiated.
Data
sheet:


APP N° 600

Synthetic Industry (Kunststoffindustrie)   
Param.:
Şeffaf plastik peletlerin renk ölçümü
Şeffaf plastik peletler renklerine ilişkin denetlenecektir. Özellikle sararma kontrol edilecektir.

Color measurement of transparent plastic pellets
Transparent plastic pellets should be color controlled and especially the yellowing should be detected.
Data
sheet:


APP N° 599

Synthetic Industry (Kunststoffindustrie)   
Param.:
Şeffaf bir plastik şeridin varlığının kontrolü
Şeffaf bir plastik şeridin varlığı denetlenecektir.

Presence control of a transparent plastic film
The presence of a transparent edge strip should be controlled.
Data
sheet:


APP N° 598

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Renklerin renk kontrolü
Bir alevin rengi denetlenecektir.

Color control of flames
The color of a flame should be controlled.
Data
sheet:


APP N° 597

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Beyaz zemin üzerindeki siyah çizginin büyük mesafeden algılanması
Beyaz zemin üzerindeki bir siyah çizgi nispeten büyük bir mesafeden algılanacaktır.

Black line detection on white background at a big distance
A black line on a white background should be detected at a big distance.
Data
sheet:


APP N° 596

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Mat ve parlak metal parçalarının ayırt edilmesi
Mat ve parlak metal parçalar ayırt edilecektir.

Differentiation of matt and shiny metal parts
Matt metal components should be differentiated from shiny metal parts.
Data
sheet:


APP N° 595

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Kamyon brandalarının ön yüzünün arka yüzünden ayırt edilmesi
Kamyon brandalarının ön yüzü arka yüzünden ayırt edilecektir.

Differentiation of front side and backside of canvas
The front side of canvas should be differentiated from the backside.


APP N° 594

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara ambalajlarındaki şeffaf plastik etiketlerin varlığının kontrolü
Sigara ambalajlarında şeffaf plastik etiketlerin varlığı denetlenecektir.

Presence control of transparent plastic label on cigarette box
The presence of a transparent plastic label on a cigarette box should be controlled.
Data
sheet:


APP N° 593

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç mekân alanı için araç bileşenlerinin renk ayırımı
İç mekân için otomotiv parçaları renklerine ilişkin ayırt edilecektir.

Color differentiation of automotive interior parts
Automotive components used in the interior field should be color differentiated.


APP N° 592

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Ahşap peletlerin nem kontrolü
Ahşap peletlerin nemi denetlenecektir.

Moisture control of wood pellets
The moisture of wood pellets should be controlled.
Data
sheet:


APP N° 591

Provisions Industry (Lebensmittelindustrie)   
Param.:
Mercimeğin nem kontrolü
Mercimeğin nemi denetlenecektir.

Moisture control of lentils
The moisture of lentils should be controlled.
Data
sheet:


APP N° 590

Provisions Industry (Lebensmittelindustrie)   
Param.:
Öğütülmüş fındığın nem kontrolü
Öğütülmüş fındığın nemi denetlenecektir.

Moisture control of grinded nuts
The moisture of grinded nuts should be controlled.
Data
sheet:


APP N° 589

Provisions Industry (Lebensmittelindustrie)   
Param.:
Buğdayın nem kontrolü
Buğdayın nemi denetlenecektir.

Moisture control of wheat
The moisture of wheat should be controlled.
Data
sheet:


APP N° 588

Provisions Industry (Lebensmittelindustrie)   
Param.:
Pirincin nem kontrolü
Pirincin nemi kontrol edilecektir.

Moisture control of rice
The moisture of rice should be controlled.


APP N° 587

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Tuğlaların nem kontrolü
Tuğlaların nemi denetlenecektir.

Moisture control of bricks
The moisture of bricks should be controlled.


APP N° 586

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Klinker taşın nem kontrolü
Klinker taşların nemi denetlenecektir.

Moisture control of clinker bricks
The moisture of clinker bricks should be controlled.


APP N° 585

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Beton taşların nem kontrolü
Beton taşların nemi denetlenecektir.

Moisture control of concrete blocks
The moisture of concrete blocks should be controlled.


APP N° 584

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Gaz betonun nem kontrolü
Gaz betonun nemi denetlenecektir.

Moisture of gas concrete
The moisture of gas concrete should be controlled.


APP N° 583

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
Kâğıdın nem kontrolü
Kâğıtların nemi denetlenecektir.

Moisture control of paper
The moisture of paper should be controlled.


APP N° 582

Textile Industry (Textilindustrie)   
Param.:
Tekstillerin nem kontrolü
Tekstillerin nemi denetlenecektir.

Moisture control of fabrics
The moisture of textiles should be controlled.


APP N° 581

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Ahşabın nem kontrolü
Ahşabın nemi kontrol edilecektir.

Moisture control of timber
The moisture of timber should be controlled.
Data
sheet:


APP N° 580

Synthetic Industry (Kunststoffindustrie)   
Param.:
Bardak kenarı algılaması
Plastik bardakların bardak kenarı algılanacaktır.

Edge detection on plastic cups
The rims of stacked plastic cups should be detected.
Data
sheet:


APP N° 579

Glass Industry (Glasindustrie)   
Param.:
Düz camlarda hasar algılaması
Yuvarlak camlarda çizikler ve parçalanmalar algılanacaktır.

Defect detection on glass plates
Defects, like scratches and splintering of cutting edges on glass discs should be detected.
Data
sheet:


APP N° 578

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomobil boyası renk kontrolü
Otomobil boyaları renklerine ilişkin ayırt edilecektir.

Car finish color control
Car finish colors should be controlled.
Data
sheet:


APP N° 577

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Bir kâğıt hattı üzerinde bir yapışkan tabakanın varlığının kontrolü
Bir kâğıt hattı üzerindeki yapışkan tabakanın varlığı denetlenecektir.

Adhesive layer presence detection on paper web
The presence of an adhesive layer on paper web should be controlled.
Data
sheet:


APP N° 576

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Güvenlik kâğıtlarında filigran algılaması
Güvenlik kâğıtlarında filigran referans işaretleri algılanacaktır.

Watermark detection on safety paper
Water reference marks should be detected on safety paper.
Data
sheet:


APP N° 575

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metal halkaların renk ayırımı
Metal halkalar renklerine ilişkin ayırt edilecektir.

Color differentiation of metal rings
Metal rings should be color differentiated.
Data
sheet:


APP N° 574

Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Plastik hatlarda yapışkan yer algılaması
Plastik hatlarda yapışkan bantlar algılanacaktır.

Tape detection on plastic films
A tape, which is used to joint plastic films, should be detected.
Data
sheet:


APP N° 573

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Perfore metal borularda üst üste binme bölgesi deteksiyonu
Perfore metal borularda üst üste binme bölgesi algılanacaktır.

Overlap joint detection on perforated metal tubes
The overlapping area on perforated metal tubes should be detected.
Data
sheet:


APP N° 572

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara kutularında yapışkan yer algılaması
Sigara ambalajlarında yapışkan yerlerin varlığı denetlenecektir.

Adhesive surface detection on cigarette boxes
The presence of adhesive joints should be detected on cigarette boxes.
Data
sheet:


APP N° 571

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara filtrelerinin ayırt edilmesi
Sigara filtre segmentleri ayırt edilecektir.

Cigarette filter differentiation
Cigarette filter segments should be differentiated.
Data
sheet:


APP N° 570

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara filtrelerinde boşluk algılama
Sigara filtre elemanları arasındaki boşluk belirlenecektir.

Gap detection of cigarette filters
The gaps between the cigarette filter components should be detected.
Data
sheet:


APP N° 569

Glass Industry (Glasindustrie)   
Param.:
Şişe ağzı konum kontrolü
Şişe ağzı yüksekliği ölçülecektir.

Bottle neck height control
The height of the bottle neck should be measured.
Data
sheet:


APP N° 568

Glass Industry (Glasindustrie)   
Param.:
Cam şişe konumlandırma
Cam şişeler konumlandırılacaktır.

Glass bottle positioning
Glass bottles should be positioned.
Data
sheet:


APP N° 567

Glass Industry (Glasindustrie)   
Param.:
INI:
Düz camda renk ayırımı
Düz cam renklerine ilişkin ayırt edilecektir.

Color differentiation of flat glasses
Flat glasses should be color differentiated.
Data
sheet:


APP N° 566

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
İç boruda kaynak dikişi algılaması
Borunun iç tarafında dönüş esnasında bir kaynak dikişi algılanacaktır.

Inner tube welding line detection
The welding line of an inner tube should be detected during rotation.
Data
sheet:


APP N° 565

Automotive Industry (Automobilindustrie)   
Otomotiv iç mekân alanından plastik parçaların renk ayırımı
Otomotiv iç mekân alanından plastik bileşenler renklerine ilişkin ayırt edilecektir.

Color differentiation of plastic automotive interior components
Automotive interior plastic parts should be color differentiated.
Data
sheet:


APP N° 564

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Bir sunta levhadaki derz yalıtımının varlığının ve renginin kontrolü
Bir lifli levhada derz yalıtımının varlığı ve rengi denetlenecektir.

Joint sealing color control on fiber boards
The color as well as the presence of the joint sealing of fiber boards should be detected.
Data
sheet:


APP N° 563

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Kavrulmuş soğanların renk kontrolü
Kavrulmuş soğanlar renklerine ilişkin incelenecektir.

Color control of roasted onions
Roasted unions should be color controlled.
Data
sheet:


APP N° 562

Packaging Industry (Verpackungsindustrie)   
Param.:
Kâğıt veya tekstil taşıyıcı malzeme üzerinde yapışkan bir yüzeyin deteksiyonu
Kâğıt veya tekstil üzerinde yapışkan bir yüzeyin varlığı denetlenecektir.

Detection of a glue line on paper or fabric
The presence of a glue line on paper or fabric should be detected.
Data
sheet:


APP N° 561

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik bileşenlerin renk ölçümü
Plastik parçaların renkleri ölçülecektir.

Color measurement of plastic components
Plastic components should be color measured


APP N° 560

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Synthetic Industry (Kunststoffindustrie)   
Param.:
Şeffaf bir plastik folyonun üzerinde UVC ışığı absorbe eden bir tabakanın varlığının kontrolü
Şeffaf bir plastik şeridin üzerinde UVC absorbe eden bir tabakanın varlığı denetlenecektir.

Detection of an UVC absorbing coating on transparent plastic film
UVC absorbing coating should be detected on transparent plastic films.
Data
sheet:


APP N° 559

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Bir kauçuk conta üzerinde floresanslı bir tabakanın varlığının kontrolü
Bir kauçuk conta üzerinde floresanslı bir tabakanın varlığı denetlenecektir.

Presence control of fluorescent coating
The presence of a fluorescent coating on rubber seal should be controlled.
Data
sheet:


APP N° 558

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
Şeffaf etiketlerdeki yapışkan yerlerdeki boşlukların algılanması
Şeffaf etiketlerde bir yapışkan yerin boşluğu algılanacaktır.

Glue line gap detection on transparent label
On a transparent label a gap in a glue line should be detected.
Data
sheet:


APP N° 557

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Siyah deri, imitasyon deri ve alkantara ayırımı
İç mekân alanı için siyah deri, imitasyon deri ve alkantaradan mamul bileşenler birbirinden ayırt edilecektir.

Differentiation of black leather, leather imitation and alcantara components
Black leather interior components should be distinguished from black leather imitation as well as alcantara material.
Data
sheet:


APP N° 556

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
Tekstil ipliklerin renk ayırımı
Derinin dikilmesi için kullanılacak olan farklı renklerdeki iplikler dikiş makinelerinin üzerinde denetlenecektir.

Color differentiation of threads
Different colored threads, used for sewing leather together, should be controlled on sewing machines.
Data
sheet:


APP N° 555

Automotive Industry (Automobilindustrie)   
Karbon fiber levhaların mesafe ölçümü
Karbon fiber levhalara mesafe ölçülecektir.

Distance measurement on carbon fiber plates
The distance to carbon fiber plates should be measured.
Data
sheet:


APP N° 554

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Parlak plastik parçaların renk ayırımı
İç mekân alanı için parlayan plastik parçalar renklerine ilişkin ayırt edilecektir.

Color differentiation of shiny plastic parts
Shiny plastic components, used for the interior automotive field, should be color differentiated.
Data
sheet:


APP N° 553

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Mat plastik parçaların renk ayırımı
İç mekân alanı için mat plastik bileşenler renklerine ilişkin ayırt edilecektir.

Color differentiation of matt plastic interior components
Matt plastic parts, used for the automotive interior field, should be color differentiated.
Data
sheet:


APP N° 552

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç mekân alanında bej plastik parçaların renk ayırımı
Otomotiv iç mekân alanında kullanılan bej rengi plastik parçalar renklerine göre ayırt edilecektir.

Color differentiation of beige interior plastic parts
Beige plastic parts, which are used in the automotive interior field, should be color differentiated.
Data
sheet:


APP N° 551

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
Baskı renklerinin yüzey ağırlığının belirlenmesi
MDF veya HDF levhalara uygulanmış olan baskı boyalarının yüzey ağırlığı kontrol edilecektir. Burada, baskı makarası üzerinde belirlenmiş olan sİM renk değerleriyle levhanın üzerindeki baskı boyasının yüzey ağırlığı arasında lineer bir ilişkinin olduğu tespit edilmiştir. Ancak burada orantısallık faktörü seçilen renge bağlıdır.

Lacquer surface weight control
The lacquer surface weight on furniture plates should be controlled. Investigations have shown that there is a proportional relation between the color space siM - parameters of the liquid paint on the pressing roll and the surface weight of the lacquer on the panel. However, the proportionality factor is dependent of the color and has to be calibrated for the respective paint.
Data
sheet:


APP N° 550

Automotive Industry (Automobilindustrie)   
Bir siyah kauçuk hatta göre mesafe ölçümü
Bir kauçuk hatta göre mesafe ölçülecektir. Burada dikkate alınması gereken husus, malzeme yüzeyinin mat siyah ile parlak siyah arasında değişebileceğidir.

Distance measurement to black rubber band
The distance to a black rubber band should be measured. It has to be taken into account, that the surface of the rubber band can change from black matt to black shiny.
Data
sheet:


APP N° 549

Synthetic Industry (Kunststoffindustrie)   
Param.:
Şeffaf plastik hatlarda parlaklık ölçümü
Farklı şeffaf plastik hatlar parlaklık derecelerine göre ayırt edilecektir. Burada hem ön yüz hem de arka yüz kontrol edilecektir.

Gloss measurement of transparent plastic films
The gloss factor of different transparent plastic films should be measured on both sides.
Data
sheet:


APP N° 548

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Küresel mafsal yüzeylerinde kaplama kontrolü
Küresel mafsalların yüzeyi denetlenecektir. Burada kaplanmamış, kaplanmış ve “mavi” kaplanmış yüzeyler ayırt edilecektir.

Ball joint coating control
The joint ball surface should be controlled with a view to the coating. At this, uncoated joint balls should be differentiated from coated and blue coated joint balls.
Data
sheet:


APP N° 547

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Şeffaf plastik şeritlerde zımba deliği algılaması
Şeffaf plastik şeritlerde zımba delikleri algılanacaktır.

Punched hole detection at transparent plastic film
Punched holes should be detected at transparent plastic films.
Data
sheet:


APP N° 546

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
HDF levhaların ayırt edilmesi
Farklı işlem görmüş HDF levhalar birbirinden ayırt edilecektir. HDF levhaların bit türü sadece zımpara kâğıdıyla işlem görmüşken, ikinci bir tür bir UV boya ile kaplanmıştır ve üçüncü tür ise UV boya ile kaplandıktan sonra yüzeyi zımpara kâğıdı ile pürüzlendirilmiştir.

Differentiation of High Density Fiberboards (HDF-boards)
Treated High Density Fiberboards should be differentiated. At this, one board is wood sanded, the 2nd board is wood sanded with first sealer and the 3rd board is wood sanded with first sealer and lacquer sanded.
Data
sheet:


APP N° 545

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
İki plastik borunun iç tarafları vasıtasıyla kontrolü
Plastik borular iç taraflarının yüzey yapısı açısından ayırt edilecektir.

Differentiation of the inner surface of plastic tubes
The inner surface of plastic tubes should be controlled.
Data
sheet:


APP N° 544

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Boyalı kapı kollarının renk kontrolü
Boyalı kapı kolları renklerine ilişkin ayırt edilecektir.

Lacquered door handle color control
The color of varnished door handles should be controlled.
Data
sheet:


APP N° 543

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Boyalı plastik parçaların renk kontrolü
Boyalı plastik parçaları renklerine ilişkin ayırt edilecektir.

Color differentiation of painted plastic components
Plastic parts should be color differentiated. For this purpose, a color sensor type SPECTRO-3-100-COF-d6.0-CL is used.
Data
sheet:


APP N° 542

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Metalize kapı kollarının ayırt edilmesi
Metalize kapı kolları renk olarak ayırt edilecektir.

Differentiation of metalized door handles
Metalized door handles should be color differentiated.
Data
sheet:


APP N° 541

Glass Industry (Glasindustrie)   
Farklı cam plakaların optik transmisyon kontrolü
Farklı cam plakalarının optik geçirgenliği denetlenecektir.

Optical transmission control of different glass plates
The transmission of different glass plates should be controlled.
Data
sheet:


APP N° 540

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Paslanmaz çelik sacların puslanma kontrolü
Paslanmaz çelik sacların puslanması denetlenecektir.

Haze control of stainless steel plates
The haze of stainless steel surfaces should be controlled.
Data
sheet:


APP N° 539

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir oyuntunun içindeki floresanslı sıvı yapıştırıcının varlığının kontrolü
Bir deliğin içinde floresanslı bir sıvı yapıştırıcının varlığı kontrol edilecektir.

Presence control of liquid fluorescent glue in a hole
The presence of fluorescent liquid glue in a hole should be controlled.
Data
sheet:


APP N° 538

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Dişli çarkların hareket yüzeylerinin kontrolü
Dişli çarkların hareket yüzeyi yüzey hasarlarına ilişkin kontrol edilecektir.

Control of the contact surface of gear wheels
The contact surface of gear wheels should be controlled.
Data
sheet:


APP N° 537

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç mekân alanında plastik parçaların renklerinin ayırt edilmesi
İç mekân alanındaki plastik bileşenler renklerine ilişkin ayırt edilecektir.

Color differentiation of interior plastic parts
Plastic parts, which are used in the automotive interior field, should be color differentiated
Data
sheet:


APP N° 536

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik bir parçanın üzerindeki bir silikon filminin varlığının kontrolü
Bir plastik bileşenin üzerindeki silikon tabakasının varlığı denetlenecektir.

Detection of silicone oil film on plastic components
The presence of silicon oil should be controlled on the surface of plastic components.
Data
sheet:


APP N° 535

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Şırıngaların üzerindeki renkli halkaların renk kontrolü
Şırıngaların üzerine yerleştirilmiş olan renkli halkaların renkleri kontrol edilecektir.

Color mark control on syringes
The color of the mark on syringes should be controlled.
Data
sheet:


APP N° 534

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Metal zincir baklalarının ayırt edilmesi
Zincir baklaları kalınlıklarına göre ayırt edilecektir. Bir parçanın kalınlığı 2,0 mm, diğer parçanın kalınlığı ise 2,3 mm’dir.

Differentiation of metal chain links
Metal chain links should be differentiated by thickness. The thickness of the one size is 2.0mm, whereas the other size has a thickness of 2.3mm.
Data
sheet:


APP N° 533

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Metal bantların üzerinde tırtıklı izlerin algılanması
Hasarlı bimetal şeritler tırtıklı izlerle işaretlenir. Devam işlemlerinde, metal bandın hasarlı kısmının daha sonra ayrılabilmesi için tırtıklı izlerin güvenle algılanması gerekir.

Detection of chatter marks on metal bands
Defects inside bimetallic bands will be marked with chatter marks. These chatter marks should be proper detected during the further processing and the damaged part of the metal stripes should be removed from the finishing later on


APP N° 532

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv alanındaki iç mekân bileşenlerinin ayırt edilmesi
İç mekân alanından der, alkantara ve tekstil parçalar renk ve yapı açısından ayırt edilecektir.

Differentiation of automotive interior parts
Interior parts used in the automotive industry should be differentiated
Data
sheet:


APP N° 531

Synthetic Industry (Kunststoffindustrie)   
Param.:
Holografik referans işaretlerinin algılanması
Holografik referans işaretleri algılanacaktır. Burada dikkate alınması gereken husus hem yeşil hem de kırmızı yansıtmalı işaretlerin aynı ayarla algılanması gerektiğidir.

Detection of holographical reference marks
Holographic reference marks should be detected. There are red as well as green reflecting reference marks which should be detected with the same adjustment.
Data
sheet:


APP N° 530

Automotive Industry (Automobilindustrie)   
Param.:
İç mekân alanında deri üzerindeki dikişlerin renk kontrolü
Farklı deri bileşenlerin üzerindeki dikişlerin rengi algılanacaktır.

Seam color detection on leather automotive interior components
The color of the seam on leather components should be controlled
Data
sheet:


APP N° 529

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Bir kâğıt hattının inline renk ölçümü
Bir kâğıt hattının rengi üretim esnasında inline ölçülecektir. Burada dikkate alınması gereken husus, ölçümün yapılacağı ortamdaki sıcaklığın ve nemin çok yüksek olduğudur.

Inline color measurement of paper web
The color of a paper web should be measured inline. It has to be taken into account, that the ambient temperature as well as the humidity is very high at the place where the paper web should be color measured.
Data
sheet:


APP N° 528

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Emniyet kemerlerinin renk ayırımı
Emniyet kemerleri renklerine ilişkin kontrol ve ayırt edilecektir.

Color differentiation of safety seat belts
Seat belts should be color controlled and differentiated.
Data
sheet:


APP N° 527

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Kaplanmış ve kaplanmamış taban seramiklerinin parlaklıklarının ayırt edilmesi
Kaplanmış ve kaplanmamış taban seramikleri ayırt edilecektir.

Gloss differentiation of coated flagstones from uncoated flagstones
Coated flagstones should be differentiated from uncoated flagstones.
Data
sheet:


APP N° 526

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İmitasyon derilerin renk ayırımı
Otomotiv sanayinde iç mekan bölgesinde kullanılan imitasyon derilerin renkleri ayırt edilecektir.

Color differentiation of leather imitations
Leather imitations in the interior automotive field should be color differentiated.
Data
sheet:


APP N° 525

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Hoparlör kapaklarının renk ayırımı
Hoparlör kapaklarının renkleri ayırt edilecektir.

Color differentiation of loudspeaker grids
The color of loudspeaker grids should be differentiated.
Data
sheet:


APP N° 524

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Siyah iç mekan bileşenlerinin renk - parlaklık ayırımı
Otomotiv sanayinde iç mekan bölgesinde kullanılan siyah imitasyon deriler, siyah tekstil bileşenlerinden ve çıplak siyah plastik parçalardan ayırt edilecektir.

Color-gloss differentiation of black interior parts
Black leather imitation components from the automotive interior field should be differentiated from black fabric as well as from black plain plastic parts.
Data
sheet:


APP N° 523

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç döşeme bölgesindeki Alcantara ve tekstil yüzeylerin ayırt edilmesi
Farklı renklerdeki Alcantara ve tekstil yüzeyler ayırt edilecektir.

Differentiation of alcantara and fabric interior components
Different colored alcantara and fabric interior components for the automotive industry should be distinguished.
Data
sheet:


APP N° 522

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Sırlı duvar seramiklerinin renk ölçümü
Sırlı duvar seramiklerinin renkleri inline olarak denetlenecektir.

Color measurement of glazed tiles
The color of glazed tiles should be inline measured.
Data
sheet:


APP N° 521

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Elokse alüminyum sacların parlaklık ölçümü
Elokse alüminyum sacların parlaklık derecesi inline olarak ölçülecektir.

Gloss measurement of anodized guide rails
The gloss of anodized aluminum guide rails should be inline measured.
Data
sheet:


APP N° 520

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Param.:
INI:
Elokse alüminyum profillerin renk ölçümü
Elokse alüminyum profillerin renkleri inline olarak denetlenecektir.

Color measurement of anodized aluminum stripes
The color of anodized aluminum stripes should be measured inline.
Data
sheet:


APP N° 519

Synthetic Industry (Kunststoffindustrie)   
Paralel şeffaf plastik pencerelerin kalite kontrolü
Şeffaf plastik plakacıklar görsel kalitelerine ilişkin denetlenecektir. Bu esnada optik sapma hataları olan plakacıkların ayrılması gerekmektedir.

Quality control of transparent plastic plates
Transparent plastic plates should be quality controlled. The parts with a high optical quality should be differentiated from components with optical aberration failures.
Data
sheet:


APP N° 518

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Geri kazanımdan gelen plastik granüllerinin renk ölçümü
Geri kazanımdan gelen plastik granülleri renklerine ilişkin kontrol edilecektir. Burada dikkate alınması gereken husus, her bir granül tanesinin inceleme camının arkasındaki konumunun farklı olabileceği ve bu nedenle de anlamlı bir ortalama renk değeri elde edebilmek için büyük bir ölçüm lekesinin avantajlı olduğudur. Dikkate alınması gereken diğer husus, inceleme camının yakınında 120°C sıcaklık olduğudur.

Color measurement of recycled plastic pellets
The color of recycled plastic pellets should be measured. It has to be taken into account, that the position of the pellets behind the inspection glass can vary, thus a big light spot has a certain advantage to get a proper average measurement value. Furthermore, it should be considered, that the ambient temperature around the inspection glass can reach 120°C.
Data
sheet:


APP N° 517

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Bir çözeltideki pasivatörün konsantrasyonunun denetlenmesi
Bir çözeltideki pasivatörün miktarı kontrol edilecektir.

Concentration control of a passivator in a solvent
The amount of a passivator in a solvent should be controlled.
Data
sheet:


APP N° 516

Textile Industry (Textilindustrie)   
Param.:
INI:
Bir bebek bezindeki flüoresanlı bir ipliğin varlığının üretim esnasında kontrolü
Bebek bezindeki flüoresanlı bir ipliğin varlığı üretim esnasında denetlenecektir.

Fluorescent thread presence control in diapers during the production
The presence of fluorescent threads in diapers should be inline controlled.
Data
sheet:


APP N° 515

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Film kondansatörlerinin alın kısmındaki kaplama kontrolü
Film kondansatörlerinin ön tarafı bir çifte kaplamanın varlığına ilişkin denetlenecektir.

Coating control at the front side of film capacitors
The double coating at the front side of film capacitors should be controlled.
Data
sheet:


APP N° 514

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Param.:
INI:
Kondansatör gövdelerinde döküm ölçü kontrolü
Bir kondansatör materyalinin döküm kütlesiyle doğru şekilde kapatıldığı denetlenecektir.

Casting compound control at capacitor housings
The casting compound of capacitor housings should be controlled.
Data
sheet:


APP N° 513

Pharmacy (Pharmazie)   
Param.:
INI:
Plastik kartuşlarda renk markası algılaması
Beyaz bir plastik kartuşun pürüzlü arka zemin üzerindeki yeşil bir renk markası algılanacaktır. Burada dikkate alınması gereken husus, bu yeşil markanın kısmen artık mevcut olmadığıdır.

Color mark detection on a plastic cartridge
A green color mark should be detected on a corrugated white plastic cartridge. It has to be taken into account, that the color mark can be partly scratched.
Data
sheet:


APP N° 512

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Kateter hortumundaki deliklerin varlığının kontrolü
Kateterdeki deliklerin varlığı denetlenecektir.

Hole presence control on catheter tubes
The presence of holes on catheter tubes should be controlled.
Data
sheet:


APP N° 511

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Bir kateterdeki yuvarlatmanın varlığının kontrolü
Bir kateterdeki yuvarlatmanın varlığı denetlenecektir.

Catheter dome presence control
The presence of a dome at the end of a catheter should be controlled.
Data
sheet:


APP N° 510

Synthetic Industry (Kunststoffindustrie)   
Yarı şeffaf plastik folyoların parlaklık derecesinin ölçümü
Işık geçirgenliği olan plastik folyoların parlaklık derecesi inline olarak ölçülecektir.

Gloss measurement of translucent plastic films
The gloss level of semi-transparent plastic films should be inline measured.
Data
sheet:


APP N° 509

Automotive Industry (Automobilindustrie)   
İçecek tutucularının plastik kapaklarının renklerinin ayırt edilmesi
Siyah plastik kapaklar koyu renkli plastik kapaklardan monte edilmiş halde ayırt edilecektir.

Color differentiation of flaps in cup holders
Black flaps should be color differentiated from dark brown flaps. During the tests the flaps are already integrated into the cup holder.
Data
sheet:


APP N° 508

Automotive Industry (Automobilindustrie)   
Tamponlarda yivlerin algılanması
Bir tampondaki parlak bir yivin varlığı denetlenecektir.

Notch presence detection on a shock absorber
A notch on a metal shock absorber should be detected. It has to be taken into account, that the notch is very shiny.
Data
sheet:


APP N° 507

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv iç mekan bileşenlerinin renk ve yüzey yapısına ilişkin ayırt edilmesi
Uygulamada çoğu iç mekan bileşenlerinin renk ve parlaklık yapısına göre net bir şekilde ayırt edilmesi sağlanabilir. Ancak tecrübeler göstermiştir ki, özellikle bir tarafta Alcantara materyalleri ve diğer tarafta tekstil materyallerin ayrıt edilmesinde, bu farklar yeterince büyük değildir ve bu nedenle bu bileşenler aynı zamanda yüzey yapılarına ilişkin olarak da incelenmelidir.

Color and structure differentiation of automotive interior components
In practice, a proper color-gloss differentiation between most of the interior components can be realized, however, it has to be taken into account, that the difference in gloss as well as in color between the fabrics and the alcantara components is small, thus the structure difference should be used to differentiate even those products.
Data
sheet:


APP N° 506

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Boyalı plastik parçaların renklerinin ayırt edilmesi
Otomotiv iç mekanlarında kullanıldığı şekliyle boyalı plastik bileşenler renklerine ilişkin ayırt edilecektir.

Color differentiation of painted plastic components
Painted plastic components used for the interior automotive area should be color differentiated.
Data
sheet:


APP N° 505

Glass Industry (Glasindustrie)   
Param.:
INI:
Bir cam şişede lazerli gravürün varlığını kontrolü
Cam şişelerin şişe boynunda yer alan bir lazerli gravürün varlığı ve yoğunluğu denetlenecektir.

Presence control of a laser engraving on a glass bottle
The presence as well as the intensity of a laser engraving on glass bottles should be controlled.
Data
sheet:


APP N° 504

Synthetic Industry (Kunststoffindustrie)   
Param.:
Plastik parçaların et kalınlığının kontrolü
Plastik parçaların et kalınlıkları denetlenecektir. Burada dikkate alınması gereken husus, plastik parçaların ışık geçirgenliğinin et kalınlığı ile korelasyon içerisinde olduğudur.

Wall thickness control of semitransparent plastic components
The wall thickness of semitransparent plastic components should be determined. It should be taken into account that the opacity correlates to the wall thickness of the plastic parts.
Data
sheet:


APP N° 503

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Taş plakaların yükseklik kontrolü
Taş plakaların kalınlığı, bir konveyör bant üzerinde taşınırlarken kontrol edilecektir. Konveyör bant kaynaklı yükseklik değişkenlikleri ilk etapta ihmal edilebilir, dolayısıyla referans olarak kullanılabilir.

Stone plate thickness control
The thickness of stone plates should be measured. At this, the stone plates will be transported on a conveyor belt with a negligible movement in height, thus it can be used as a reference.
Data
sheet:


APP N° 502

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metal sac üzerindeki yarı şeffaf plastik tabakanın varlığının kontrolü
Metal sac üzerindeki mavimsi yarı şeffaf bir plastik şeridin varlığı denetlenecektir.

Presence control of a semitransparent plastic film on a metal sheet
A semitransparent light blue plastic film should be detected on a metal sheet.
Data
sheet:


APP N° 501

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Kayan yatak yarım gövdelerinin renklerinin ayırt edilmesi
Kayan yatak yarım gövdeleri iç yüzeylerinin renklerine ilişkin ayırt edilecektir.

Color differentiation of half shells of bush bearings
Half shells of friction-type bearings should be color differentiated.
Data
sheet:


APP N° 500

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Siyah boyalı metal çerçevede bir astar olup olmadığının kontrolü
Siyah boyalı bir metal çerçeve üzerine uygulanmış bir astarın olup olmadığı algılanacaktır.

Primer presence control on a black painted metal frame
The presence of a primer should be detected on a black painted metal frame.
Data
sheet:


APP N° 499

Automotive Industry (Automobilindustrie)   
Param.:
INI:
İç mekan bileşenlerinin LED renk kontrolü
İç mekandaki plastik bileşenlerindeki LED'lerin renkleri ve yoğunluğu kontrol edilecektir. Ayrıca LED olmayan bileşenlerde kapak olup olmadığı sorgulanacaktır.

LED color control on interior components
The color as well as the intensity of LEDs, integrated in interior components, should be controlled. Furthermore, on components without LEDs the presence of a cover plate should be checked.
Data
sheet:


APP N° 498

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metal halkaların renk kontrolü
Metal halkaların kalitesi renklerine ilişkin kontrol edilecektir.

Color control of metal rings
The quality of metal rings should be controlled with a view to the color.
Data
sheet:


APP N° 497

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Metal hoparlör kapaklarının renklerinin ayırt edilmesi
İki farklı model metal hoparlör kapağı renklerine ilişkin ayırt edilecektir.

Color differentiation of metal loudspeaker grids
Two kinds of metal loudspeaker grids should be color differentiated.
Data
sheet:


APP N° 496

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metal ızgaralarda yağın varlığının kontrolü
Metal ızgaralarda yağın mevcut olduğu kontrol edilecektir.

Oil presence control on metal grids
The presence of oil should be detected on metal grids.
Data
sheet:


APP N° 495

Textile Industry (Textilindustrie)   
Kaplanmış tekstil yüzeylerin parlaklık ölçümü
Kaplanmış tekstil yüzeylerin parlaklık faktörü ölçülecektir.

Gloss measurement on coated textiles
The gloss of fabrics will be influenced from a special coating and the task should be an inline measurement of the gloss value.
Data
sheet:


APP N° 494

Textile Industry (Textilindustrie)   
Param.:
INI:
Isı ile kapatılan şeffaf folyo içine konulmuş tişörtlerin renklerinin kontrolü
Şeffaf folyo içine paketlenmiş olan tişörtlerin renkleri denetlenecektir.

Color control of T-shirts packed in transparent plastic film
The color of T-shirts packed in a transparent plastic film should be controlled.
Data
sheet:


APP N° 493

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Param.:
INI:
Metal folyolarda flüoresan algılaması
Metal folyolarda üzerinde bir flüoresan tabakasının varlığı denetlenecektir.

Fluorescence detection on metal foils
The presence of fluorescence coating on a metal foil should be controlled.
Data
sheet:


APP N° 492

Glass Industry (Glasindustrie)   
Cam şişelerde nokta algılaması
Cam şişelerdeki noktalar dönme esnasında algılanacaktır.

Dot detection on glass bottles
Dots on glass bottles should be detected during the rotation.
Data
sheet:


APP N° 491

Synthetic Industry (Kunststoffindustrie)   
Param.:
Entegre dokuma tabakalı şeffaf plastik plakaların yüksekliğinin ölçülmesi
İçine yerleştirilmiş tekstil yüzey olan şeffaf plastik plakaların yüksekliği ölçülecektir.

Height measurement of a transparent plastic plate with embedded fabric
The height of transparent plastic plate with different embedded fabric should be measured.
Data
sheet:


APP N° 490

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Parlatılmış taş plakaların kalınlık kontrolü
Parlatılmış taş plakaların kalınlıkları denetlenecektir. Burada dikkat edilmesi gereken husus, taş plakaların bir referans plakası üzerinde taşındığıdır.

Thickness measurement of polished slabs
The thickness of polished slabs should be measured. It should be noted, that the slabs are placed on a reference plate.
Data
sheet:


APP N° 489

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
Parlatılmış taş plakaların parlaklık kontrolü
Parlatılmış taş plakaların parlaklıkları denetlenecektir.

Gloss measurement on polished slabs
The gloss of polished slabs should be measured.
Data
sheet:


APP N° 488

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Parlatılmış taş plakaların renk kontrolü
Parlatılmış taş plakaların renkleri denetlenecektir.

Color control of polished slabs
The color of polished slabs should be controlled.
Data
sheet:


APP N° 487

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik granüllerinin renk ölçümü
Plastik granüllerinin rengi üretim esnasında ölçülecektir.

Color measurement of plastic pellets
The color of plastic pellets should be measured during the production.
Data
sheet:


APP N° 486

Textile Industry (Textilindustrie)   
Param.:
INI:
Farklı tekstil malzemelerde renk markası ölçümü
Farklı tekstillerdeki renk markalarının L*a*b* renk değerleri ölçülecektir.

Color mark measurement on fabric
The L*a*b* values of color marks on different fabric should be determined.
Data
sheet:


APP N° 485

Textile Industry (Textilindustrie)   
Param.:
INI:
Bir iplik bobininin sarım prosesinde iplik konum kontrolü
Sarım prosesinde bir tekstil ipliğinin bobin üzerindeki konumu denetlenecektir.

Winding control of yarn on a pirn
During the winding of yarn, the correct winding should be controlled.
Data
sheet:


APP N° 484

Automotive Industry (Automobilindustrie)   
Param.:
Bir püskürtme demetindeki partikül boyutunun ölçümü
Bir püskürtme demetindeki partikül boyutu belirlenecektir.

Particle size measurement in a spray jet
The size of particles in a spray jet should be measured.
Data
sheet:


APP N° 483

Automotive Industry (Automobilindustrie)   
Param.:
Hareket esnasında püskürtme demeti kontrolü
Bir sprey kutusunun püskürtme demeti hareket esnasında denetlenecektir.

Spray jet control during the movement
The spray jet of a spray nozzle should be controlled during the movement.
Data
sheet:


APP N° 482

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Boyalı sacların renk ölçümü
Boyalı sacların renkleri belirlenecektir (L*a*b* değerleri).

Color measurement of lacquered metal sheets
The color of painted metal sheets should be measured (L*a*b* values).
Data
sheet:


APP N° 481

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Plastik pim kovanlarının renklerinin ayırt edilmesi
Plastik kovanlar renklerine ilişkin ayırt edilecektir.

Color differentiation of plastic pen housings
The color of plastic bushings should be controlled.
Data
sheet:


APP N° 480

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Metal pimlerin konumlarının doğruluğunun kontrolü
Çelikten mamul döner parçalar depolama yönlerinin doğruluğuna ilişkin kontrol edilecektir.

Direction control of metal pins
The direction of metal pins should be controlled.
Data
sheet:


APP N° 479

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Açık renkli emniyet kemeri kilit kapaklarının renklerinin ayırt edilmesi
Açık renkli emniyet kemeri kilit kapakları renklerine ilişkin ayırt edilecektir.

Color differentiation of bright seat belt plastic housings
Bright seat belt plastic housings should be color differentiated.
Data
sheet:


APP N° 478

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Plastikten mamul bej renkli emniyet kemeri kilit kapaklarının renklerinin ayırt edilmesi
Bej ve açık bej rengindeki emniyet kemeri kilit kapakları ayırt edilecektir.

Color differentiation of beige seat belt plastic housings
Beige colored seat belt plastic housings should be differentiated.
Data
sheet:


APP N° 477

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Koyu renkli emniyet kemeri kilit kapaklarının renklerinin ayırt edilmesi
Emniyet kemeri kilit kapakları renklerine ilişkin ayırt edilecektir. Burada söz konusu olan, kısmen hafif kırmızıya ve kısmen hafif maviye kaçan bir tonu olan çok koyu renkli plastik parçalardır.

Color differentiation of dark seat belt plastic housings
Dark seat belt housings should be differentiated.
Data
sheet:


APP N° 476

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Otomotiv alanında iç mekan plastik parçalarının renklerinin ayırt edilmesi
Plastikten mamul iç mekan parçaları renk olarak ayırt edilecektir.

Color differentiation of plastic interior components for the automotive industry
Plastic components used for the automotive interior field should be color differentiated.
Data
sheet:


APP N° 475

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
İç kısımları tek veya çift boyanmış alüminyum kovanların ayırt edilmesi
İç kısımları bir defa boyanmış olan alüminyum tüpler, iç kısımları iki defa boyanmış olan alüminyum tüplerden ayrıt edilecektir.

Differentiation of single and double inside coated aluminum tubes
Single inside coated aluminum tubes should be differentiated from double inside coated aluminum tubes.
Data
sheet:


APP N° 474

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Farklı conta tabakalarındaki flüoresanlı yağın algılanması
Conta tabakalarında yağın mevcut olduğu kontrol edilecektir. Burada dikkat edilmesi gereken husus, yağın UV ışığı altında flüoresan özelliği gösterdiğidir.

Detection of fluorescent oil on flat washers
The presence of oil on different flat washers should be controlled. It has to be taken into account, that the oil is fluorescent, if UV light is used.
Data
sheet:


APP N° 473

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Metal pimlerin üzerinde flüoresanlı gres maddesinin algılanması
UV ışığı altında flüoresan özelliği gösteren gres maddesinin varlığı algılanacaktır.

Detection of fluorescent lubricant on metal pins
Fluorescent lubricant should be detected on metal pins.
Data
sheet:


APP N° 472

Synthetic Industry (Kunststoffindustrie)   
Plastik boruların renklerinin ayırt edilmesi
Plastik borular renklerine ilişkin ayırt edilecektir.

Color differentiation of small plastic tubes
Small violet plastic tubes should be color differentiated.
Data
sheet:


APP N° 471

Synthetic Industry (Kunststoffindustrie)   
Param.:
Küçük plastik fırçaların renklerinin ayırt edilmesi
Küçük plastik fırçalar renklerine ilişkin ayırt edilecektir.

Color differentiation of small plastic brushes
Small plastic brushes should be color differentiated.
Data
sheet:


APP N° 470

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Çatı kiremidi renk ölçümü
Çatı kiremitlerinin renkleri inline olarak denetlenecektir.

Roof tile color measurement
The color of roof tiles should be inline measured.
Data
sheet:


APP N° 469

Glass Industry (Glasindustrie)   
Şeffaf bir şişenin üzerinde UV ışığı absorbe eden bir tabakanın varlığının algılanması
Şeffaf bir şişenin üzerinde UV ışığı absorbe eden bir tabakanın varlığı güvenilir bir şekilde algılanacaktır.

Detection of an UV blocking layer on transparent glass bottles
The presence of an UV blocking layer should be detected on transparent glass bottles.
Data
sheet:


APP N° 468

Automotive Industry (Automobilindustrie)   
Boyalı plastik bileşenlerin renklerinin ayırt edilmesi
Boyalı plastik bileşenler renk olarak ayırt edilecektir. Burada çevirme yönünün (yüzeyin dikine göre) ölçüm sonucu üzerinde bir etkisi olmamalıdır.

Color differentiation of lacquered plastic components
Car finish should be color differentiated. A rotation around the perpendicular axis of the plastic components should not influence the result of the color control.
Data
sheet:


APP N° 467

Automotive Industry (Automobilindustrie)   
Otomobil kapı kollarının renklerinin ayırt edilmesi
Otomobil kapı kollarının renkleri ayırt edilecektir. Burada dikkat edilmesi gereken husus, boyalı yüzeyin yoğun bir şekilde parladığıdır.

Color differentiation of car door handles
Car door handles should be color differentiated. It has to be taken into account, that the door handles are very shiny.
Data
sheet:


APP N° 466

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Zımbalanarak kesilmiş bir parçanın burun bölgesinde yarı yuvarlak bir kesme işleminin varlığının kontrolü
Zımbalanarak kesilmiş bir parçanın burun bölgesinde yarı yuvarlak bir kesme olup olmadığı kontrol edilecektir. Burada kontrol edilmesi gereken diğer bir husus, burada bir yarım dairenin mi yoksa uzatılmış bir çentiğin mi söz konusu olduğudur.

Presence control of a notch in a lobe of a metal stamping part
The presence of a notch in a lobe of a metal stamping part should be detected. Furthermore a semicircular notch must be differentiated from an elongated notch.
Data
sheet:


APP N° 465

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
İzolasyonlu kabloların renk kontrolü
Elektrik kablolarının izolasyonlarının rengi inline olarak ölçülecektir.

Color measurement of the insulation of cables
The color of the insulation of electrical cables should be inline measured.
Data
sheet:


APP N° 464

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
Dış alanda püskürtülen miktar kontrolü
Dış alanda bir püskürtme demetinin varlığı ve püskürtülen miktar denetlenecektir. Burada dikkat edilmesi gereken husus, burada ışığın demetin içinden geçirilmesi yönteminin kullanılamayacağıdır.

Spray jet amount control in the Ɛx range
The presence as well as the spray amount of a spray jet in the Ex range should be controlled. It has to be taken into account, that a system based on the transmitted light mode cannot be used for this application.
Data
sheet:


APP N° 463

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Param.:
INI:
Cıvata ve somunda yağ olup olmadığının kontrolü
Cıvata ve somunlarda yağ olup olmadığı, cıvata yerine takılmadan hemen önce denetlenecektir.

Oil presence control in metal screw nuts and screws
The presence and amount of oil in a screw nut as well as in a screw should be detected directly before border crimping.
Data
sheet:


APP N° 462

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Katlanmış kağıt torbaların sayılması
Bir konveyör bant üzerinde taşınan kağıt torbalar sayılacaktır.

Folded paper cone counting
Folded paper cones transported on a conveyor belt should be counted.
Data
sheet:


APP N° 461

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
INI:
Bir emniyet kemeri üzerindeki kırmızı şeridin renk kontrolü
Bir emniyet kemeri üzerindeki kırmızı şeridin rengin denetlenecektir. Kırmızı rengin belirli bir tolerans aralığında olması gerekmektedir.

Color control of a red stripe on a fabric
The color of a red stripe on a safety belt should be controlled. At this, the red color should remain in a certain tolerance range.
Data
sheet:


APP N° 460

Textile Industry (Textilindustrie)   
Param.:
Bir kumaşın kabadan inceye geçişi denetlenecektir
Bir tekstil yüzey üzerinde kabadan inceye geçiş yerinin konumu kontrol edilecektir.

Edge position detection on fabric
The position of the changeover from rough to fine on a textile should be detected.
Data
sheet:


APP N° 459

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Bir plastik halkanın ön ve arka yüzünün ayırt edilmesi
Bir konveyör bant üzerinde taşınan plastik halkalar, konumları açısından (ön yüz üstte - altta) kontrol edilecektir.

Plastic ring bottom side – upper side differentiation
Plastic rings which are transported on a conveyor belt should be differentiated with a view to the direction (bottom side – upper side).
Data
sheet:


APP N° 458

Chemical Industry (Chemische Industrie)   
Param.:
INI:
Dokusuz yüzeyli plastik bandın ayırma yerlerinin algılanması
Bir dokusuz yüzeyli plastik bandın ayırma yeri algılanacaktır. Burada dikkat edilmesi gereken husus, hem ayrıma yerinin hem de dokusuz yüzeyli plastik bandın yüzeyinin beyaz olduğu, yani renk farkının olmadığıdır.

Cut off point detection on a fleece tape
The cut off line on a fleece tape should be detected. It should be taken into account, that the fleece tape as well as the cut off line is white in color, thus, there is no color difference.
Data
sheet:


APP N° 457

Chemical Industry (Chemische Industrie)   
Şeffaf plastik bandın üzerindeki silikon tabakasının konumunun algılanması
Bir şeffaf plastik bandın üzerindeki silikon tabakasının konumu algılanacaktır (bandın ön yüzünün ve arka yüzünün algılanması).

Position detection of a silicon layer on a transparent plastic film
The position of a silicon layer on a transparent plastic film should be detected (frontside / backside differentiation).
Data
sheet:


APP N° 456

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir cıvatanın dişleri üzerinde tutkal izlerinin algılanması
Bir cıvatanın dişlerinin üzerindeki flüoresanlı (UV ışığı altında flüoresan özelliği gösteren) yapışkan maddenin varlığı ve miktarı kontrol edilecektir.

Glue detection on the thread of a screw
The presence and amount of fluorescent (fluorescent under the influence of UV light) glue on the thread of a screw should be detected.
Data
sheet:


APP N° 455

Automotive Industry (Automobilindustrie)   
Param.:
INI:
Deri ve imitasyon deri üzerindeki dikişin algılanması
Bej (siyah) deri veya imitasyon deri üzerindeki bej (siyah) dikişler algılanacaktır.

Seam detection on leather and leather imitations
Beige (black) stitching should be detected on beige (black) leather or leather imitations.
Data
sheet:


APP N° 454

Automotive Industry (Automobilindustrie)   
Deri ve imitasyon derinin ayırt edilmesi
İç döşeme bölgesinde bulunan deri ve imitasyon deri güvenilir olarak birbirinden ayrılacaktır.

Differentiation of leather and leather imitations
Leather and leather imitations used in the interior field should be proper differentiated.
Data
sheet:


APP N° 453

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Param.:
INI:
Alçı karton plakasının boyunun ölçümü
Bir alçı karton plakasının boyu ölçülecektir.

Measurement of the length of gypsum plasterboard
The length of gypsum plasterboard should be measured.
Data
sheet:


APP N° 452

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Çelik halkaların çift kat kontrolü
Bir veya iki çelik halkanın varlığı denetlenecektir.

Double ring control
The presence of one or two rings should be controlled.
Data
sheet:


APP N° 451

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir lastik tıkacın bir enjeksiyon şırıngasına takılmadan hemen önceki konumunu kontrolü
Bir lastik tıkacın konumunun doğruluğu, bir enjeksiyon şırıngası kapatılmadan önce denetlenecektir.

Position monitoring of a rubber plug before the final positioning in a syringe
The position of a rubber plug should be controlled with regard to the outer face and inner surface.
Data
sheet:


APP N° 450

Glass Industry (Glasindustrie)   
Cam kaplamanın yansıma ışığının renk kontrolü
Cam kaplamaları, yansıma ışığı yöntemiyle renk akışına ilişkin incelenecektir.

Reflected light color control of coatings on glass plates
The coating of glass plates should be color controlled in the reflected light mode.
Data
sheet:


APP N° 449

Glass Industry (Glasindustrie)   
Cam kaplamanın içinden geçen ışığın renk kontrolü
Cam kaplamaları, içinden geçen ışık yöntemiyle renk akışına ilişkin incelenecektir.

Transmitted light color control of coatings on glass plates
The coating of glass plates should be color controlled in the through beam way.
Data
sheet:


APP N° 448

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
İç borularda kaynak dikişlerinin denetlenmesi
İç borudaki kaynak dikişinin konumu belirlenecektir.

Detection of the welding line in the core retainer
The position of the welding line should be detected in inner pipes.
Data
sheet:


APP N° 447

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Param.:
INI:
Şırıngaların plastik kapaklarının renk ayırımı
Cam şırıngalarında kullanılan plastik kapaklar kontrol edilecektir. Burada dikkat edilmesi gereken husus, plastik kapakların hafif şeffaf olduğu ve ayrıca kapakların yüzeylerinin çok parlak olduğudur.

Color differentiation of plastic caps for syringes
Plastic caps used for syringes should be color controlled. It has to be taken into account, that the plastic caps are semitransparent and the surface is very glossy.
Data
sheet:


APP N° 446

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Dağınık yansıma işletiminde püskürtme demeti kontrolü
Dış ortamdaki kullanımda dağınık yansıma işletiminde püskürtme demeti kontrolü gerçekleştirilecektir.

Spray jet control with reflected light
The spray jet should be controlled with reflected infrared light and in an Ɛx zone environment.
Data
sheet:


APP N° 445

Provisions Industry (Lebensmittelindustrie)   
Param.:
INI:
Patates kızartmasının renk kontrolü
Patates kızartmasının rengi denetlenecektir.

Color control of fried potato chips
The color of fried potato chips should be controlled.
Data
sheet:


APP N° 444

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Baskılı plastik plakaların gri değeri kontrolü
Baskılı plastik plakaların gri değeri denetlenecektir.

Gray value control of screen printing plastic plates
The gray scale value of screen printing plastic plates should be controlled.
Data
sheet:


APP N° 443

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Baskı renk markalarının renklerinin denetlenmesi
Plastik plakaların üzerindeki baskı renk markalarının renkleri kontrol edilecektir.

Control of silk-screen printing color marks
Screen printing color marks should be controlled on plastic sheets.
Data
sheet:


APP N° 442

Lifestyle (Lifestyle)   
Param.:
INI:
Ojelerin renklerinin ayırt edilmesi
Ojelerin renkleri denetlenecektir. Burada dikkat edilmesi gereken husus, şişelere doldurulmuş ojelerin şeffaf camdan renklerine göre ayırt edileceğidir.

Color control of nail polishes
The color of nail varnishes should be controlled. It has to be taken into account that the nail lacquers should be checked through transparent glass bottles.
Data
sheet:


APP N° 441

Lifestyle (Lifestyle)   
Param.:
Makyaj malzemesinin renklerinin ayırt edilmesi
Makyaj malzemesinin renkleri kontrol edilecektir.

Color differentiation of make-up
The color of make-up should be controlled.
Data
sheet:


APP N° 440

Lifestyle (Lifestyle)   
Param.:
INI:
Göz farlarının renklerinin ayırt edilmesi
Göz farlarının renkleri kontrol edilecektir.

Color differentiation of eye shadows
The color of eye shadows should be controlled.
Data
sheet:


APP N° 439

Lifestyle (Lifestyle)   
Param.:
INI:
Rujların renklerinin ayırt edilmesi
Rujların renkleri kontrol edilecektir.

Color differentiation of lipsticks
The color of lipsticks should be controlled.
Data
sheet:


APP N° 438

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
Metal tellerin çap kontrolü
Farklı metal tellerin çapları ölçülecek ve teller ayırt edilecektir.

Diameter control of metal wires
The diameter of metal wires should be controlled and the wires should be differentiated.
Data
sheet:


APP N° 437

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Param.:
INI:
Kalay ve gümüş kaplı baskı şeritlerin ayırt edilmesi
Kalay kaplı baskı şeritleri gümüş kaplı baskı şeritlerinden ayrılacaktır.

Color differentiation of tin and silver plated stamping stripes
Tin plated stamping stripes should be distinguished from silver plated stamping stripes.
Data
sheet:


APP N° 436

Packaging Industry (Verpackungsindustrie)   
Param.:
Sigara filtrelerinin konumlarının belirlenmesi
Sigara filtrelerinin konumları hassas ve birkaç m/s gibi yüksek obje hızlarında bile tespit edilecektir.

Cigarette filter position detection
The position of the filter segments, which are made for cigarettes, should be precisely detected, even at a high speed of a few m/s.
Data
sheet:


APP N° 435

Synthetic Industry (Kunststoffindustrie)   
Şeffaf bir plastik folyo üzerindeki ince bir tabakanın kalınlık ölçümü
Optik olarak şeffaf bir taşıyıcı materyal üzerindeki ince bir tabakanın kalınlığı belirlenecektir. Burada transmisyon ölçümünün yapılması akla yakındır, çünkü bunun yoğunluğu tabakanın kalınlığının hesaplanmasında kullanılabilir.

Thickness control of a thin layer on a transparent plastic film
The thickness of a thin layer on a transparent plastic film should be measured. To measure the transmission with a through beam system seems to be an adequate method to determine the thickness of a thin layer.
Data
sheet:


APP N° 434

Synthetic Industry (Kunststoffindustrie)   
Param.:
INI:
Optik olarak yarı şeffaf plastik plakaların matlık kontrolü
Optik olarak yarı şeffaf plastik plakalar matlıklarına ilişkin incelenecektir.

Haze control of semi transparent plastic plates
Semi transparent plastic plates should be controlled with a view to the opacity.
Data
sheet:


APP N° 433

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Param.:
INI:
Plastik kapakların renklerinin ayırt edilmesi
Su şişeleri için kullanılan plastik kapaklar renklerine göre ayrılacaktır. Burada dikkat edilmesi gereken husus, kapakların aşırı derecede parladığıdır.

Color differentiation of plastic caps
Plastic caps for drinking bottles should be color differentiated. It has to be taken into account, that the closures are very glossy.
Data
sheet:


APP N° 432

Automotive Industry (Automobilindustrie)   
Param.:
Boyalı süsleme pervazlarının renklerinin ayırt edilmesi
Süsleme pervazları renklerine ilişkin ayırt edilecektir. Burada dikkat edilmesi gereken husus, süsleme pervazlarının koruyucu boya nedeniyle yoğun bir şekilde parladığıdır.

Color differentiation of lacquered trims
Trim strips should be color differentiated. It has to be taken into account, that the lacquered trims are very shiny.
Data
sheet:


APP N° 431

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Kartuşların kalite kontrolü
Lazer baskı kartuşlarının yapısı denetlenecektir. Burada kartuşların yüzeylerinin yansıtma özelliğinin kullanıldıkça azaldığı tespit edilebilir.

Quality control of cartridges
The quality of cartridges should be controlled. It has to be taken into account, that the reflectivity of the surface of the cartridges will be decreased with the increase of the usage of the cartridges.
Data
sheet:


APP N° 430

Lifestyle (Lifestyle)   
Değerli taşların renk ve bulanıklık kontrolü
Değerli taşların optik şeffaflığı ile renkleri kontrol edilecektir.

Color and opacity control of gemstones
The color as well as the opacity of gemstones should be controlled.
Data
sheet:


APP N° 429

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Param.:
INI:
Reçineli ipliklerin renklerinin ayırt edilmesi
Reçineli iplikler renk olarak ayırt edilecektir. Burada dikkat edilmesi gereken husus, ipliklerin reçine nedeniyle yoğun bir şekilde parladığıdır.

Color differentiation of waxed threads
Waxed threads should be color differentiated. It has to be taken into account, that due to the wax coating the surface of the threads is very shiny.
Data
sheet:


APP N° 428

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Param.:
INI:
Çelikten mamul galvanize olan ve galvanize olmayan döner kısımların ayırt edilmesi
Çelikten mamul galvanize döner kısımlar galvanize olmayan döner kısımlardan ayırt edilecektir.

Differentiation of zinc plated steel parts and raw steel parts
Zinc plated steel turned parts should be differentiated from raw steel turned parts.
Data
sheet:


APP N° 427

Pharmacy (Pharmazie)   
Kapsüllerin renk ve yön kontrolü
Kapsüllerin renk ve yönleri üretim esnasında ve paketlenmeden hemen önce denetlenecektir.

Color and guidance control of capsules
The color as well as the orientation of capsules should be controlled during the production and just before packaging.
Data
sheet:


APP N° 426

Textile Industry (Textilindustrie)   
Tekstillerin renk kontrolü
Tekstil yüzeylerin renkleri inline olarak denetlenecektir.

Detection of color on fabric
The color of different colored fabric should be inline controlled.
Data
sheet:


APP N° 425

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Bir alüminyum gövde üzerinde bir yağ tabakasının varlığının kontrolü
Bir alüminyum gövdede, gövdenin iç kısmındaki yüzeyin bir yağ tabakası ile kaplı olup olmadığı denetlenecektir.

Presence control of an oil film on an aluminum surface
The presence of an oil film in aluminum housing should be controlled.
Data
sheet:


APP N° 424

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Çelik bir yüzey üzerinde yağ damlasının varlığının kontrolü
Bir çelik yüzey üzerinde bir yağ damlasının varlığı denetlenecektir.

Oil drop presence control on a steel surface
The presence of an oil drop on a steel surface should be controlled.
Data
sheet:


APP N° 423

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Patlama disklerindeki membranların çift kat kontrolü
Bir patlama diskinde bir veya yanlışlıkla iki kat membranın olduğu kontrol edilecektir. Burada dikkat edilecek husus, patlama diskleri için farklı materyallerin (bakır veya alüminyum) ve aynı zamanda farklı membranların (alüminyum veya çelik folyo) kullanılmış olabileceğidir.

Double membrane control on breaker plates
The presence of one or two diaphragms in a blow-out disk should be differentiated. At this, different types of burst disks are available (copper and aluminum) with different diaphragms (aluminum membrane or steel membrane).
Data
sheet:


APP N° 422

Pharmacy (Pharmazie)   
Plastik bir parça üzerindeki silikon bir yüzüğün varlığının kontrolü
Plastik bir parça üzerindeki silikon bir yüzüğün varlığı sorgulanacaktır.

Presence control of a seal ring on a plastic component
The presence of a silicon ring on a plastic component should be controlled.
Data
sheet:


APP N° 421

Packaging Industry (Verpackungsindustrie)   
Plastik zarf üzerinde flüoresanlı bir yapışkan tabakanın algılanması
Bir plastik zarf üzerinde UV etkisiyle flüoresanlı bir yapışkan tabaka algılanacaktır. Burada dikkat edilmesi gereken husus, yapışkan tabakanın şeffaf bir plastik bant ile kapatıldığıdır.

Fluorescent glue strip detection on a plastic bag
A glue strip, which becomes fluorescent in the presence of UV light, should be detected on a plastic bag. At this, the glue strip is covered with a transparent plastic film.
Data
sheet:


APP N° 420

Packaging Industry (Verpackungsindustrie)   
Plastik kaplamalardaki yapışkan tabakanın algılanması
Plastik kaplamalardaki bir yapışkan tabaka algılanacaktır. Yapışkan tabaka, malzemenin diğer tarafından plastik folyoda belirli bir dalgalanmaya neden olur. Yapışkan taraf metalik olarak yüksek parlaklıktaki bir folyo ile kaplı olduğundan, zorunlu olarak diğer tarafta kontrol yapılmalıdır.

Glue strip detection on plastic envelopes
A glue strip should be detected on a plastic envelope. At this, the glue strip causes a corrugated pattern at the opposite side of the plastic material. Due to the fact, that the glue strip is covered with a metal coated high reflective plastic film, the only chance to detect it is from the opposite side.
Data
sheet:


APP N° 419

Automotive Industry (Automobilindustrie)   
İç döşeme bölgesindeki Alcantara kaplamaların tekstil yüzeylerden ayırt edilmesi
Alcantara kaplamalar tekstil yüzeylerden ayrılacaklardır.

Differentiation Alcantara (Ultrasuede) and fabric interior equipment
Alcantara and fabric interior equipment should be differentiated.
Data
sheet:


APP N° 418

Synthetic Industry (Kunststoffindustrie)   
Plastik granüllerin ayırt edilmesi
Kimyasal olarak ve renk olarak bir birinde biraz farklı olan plastik granülleri bir birinden ayrılacaktır.

Differentiation of plastic pellets
Chemically and in terms of color different plastic pellets should be distinguished.
Data
sheet:


APP N° 417

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Pharmacy (Pharmazie)   
Flüoresanlı etiketlerin algılanması
UV ışığı altında flüoresan özelliği gösteren etiketler ile etiketlerin arasındaki boşluklar algılanacaktır.

Fluorescent label detection
Fluorescent labels should be detected on semitransparent carriers.
Data
sheet:


APP N° 416

Textile Industry (Textilindustrie)   
Bir iğin plastik şaftında iplik olup olmadığının kontrolü
Bir iğin plastik şaftında iplik olup olmadığı sorgulanacaktır.

Yarn presence control on plastic spindle
The presence of a yarn on a plastic spindle should be controlled.
Data
sheet:


APP N° 415

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal çubukların yön kontrolü
Metal çubuklar depolama yönlerinin doğruluğuna ilişkin kontrol edilecektir. Burada metal çubukların bir tarafı yassıtılmış diğer tarafı yuvarlaktır.

Direction control of a metal rod
The direction of a metal rot should be controlled. At this, the metal rod is flat press formed at the one side and at the other end round in shape.
Data
sheet:


APP N° 414

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Sanayi tipi fanların frekans kontrolü
Fanların frekansı ve dönüş yönü denetlenecektir. Bunun için rotor kanatlarının birine UV ışığı altında flüoresan özelliği kazanan bir etiket yapıştırılır.

Frequency control of industrial ventilators
The frequency as well as the direction of rotation of industrial ventilators should be controlled. At this, on one of the blades of the ventilator a fluorescent label is glued on.
Data
sheet:


APP N° 413

Environmental Technology (Umwelttechnik)   
Şeffaf bir plastik folyo üzerindeki metal tellerin konumu kontrol edilecektir
Şeffaf bir plastik folyoda, metal tellerin folyonun ön tarafında mı yoksa arka tarafında mı olduğu kontrol edilecektir.

Position monitoring of metal wires on a transparent plastic layer
The back side / front side position of metal wires on a transparent plastic film should be controlled.
Data
sheet:


APP N° 412

Automotive Industry (Automobilindustrie)   
Körükteki katların algılanması ve katların sayılması
Farklı körük malzemelerinde katların sayısı sayılacaktır.

Edge detection at bellows (fold counting)
On bellows the edges should be detected and counted.
Data
sheet:


APP N° 411

Automotive Industry (Automobilindustrie)   
Gaz basınç yayı modellerinin ayırt edilmesi
İki farklı gaz basınç yayı ayrılacaktır. Gaz basınç yayları kontrol esnasında döndürülebilirler.

Differentiation of pneumatic cylinders
Pneumatic cylinders should be differentiated. At this, the cylinder can be rotated along its axis.
Data
sheet:


APP N° 410

Automotive Industry (Automobilindustrie)   
Turbo şarj rotorlarının devir kontrolü
Turbo şarj rotorlarının devri kontrol edilmelidir. Bunun için rotorlardan birinin kanadı flüoresanlı şeffaf boya ile kaplıdır.

Frequency control of turbo charger wheels
The frequency of turbo charger wheels should be controlled. At this, one of the blades of the wheel is coated with a fluorescent transparent lacquer.
Data
sheet:


APP N° 409

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Elektrik motorlarının demir çekirdeklerindeki boşlukların algılanması
Elektrik motorlarının demir çekirdeklerindeki boşluklar hızlı devir esnasında güvenilir bir şekilde tespit edilmelidir.

Gap detection on iron cores of electrical motors
The gaps on iron cores of electrical motors should be detected during the fast rotation.
Data
sheet:


APP N° 408

Automotive Industry (Automobilindustrie)   
Siyah ve koyu gri suni derinin ayırt edilmesi
Siyah ve suni koyu gri deri ayırt edilebilir.

Differentiation of black and dark gray leather imitation
Dark gray and black leather imitation should be distinguished.
Data
sheet:


APP N° 407

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Automotive Industry (Automobilindustrie)   
Metal diş başlangıcında plastik kalıntı tespiti
Metal diş başlangıcında plastik artıklar tespit edilmelidir.

Detection of plastic residues on the start of metal thread
Plastic residues on the start of metal threads should be detected.
Data
sheet:


APP N° 406

Synthetic Industry (Kunststoffindustrie)   
Beyaz plastik tabakanın geçirgenlik kontrolü
Beyaz plastik levhanın geçirgenliği kontrol edilebilir.

Transparency control of white plastic plates
The transparency of white plastic plates should be controlled.
Data
sheet:


APP N° 405

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir dişli çarktaki deliğin ve iç dişlerin varlığının kontrolü
Dişli çarkta deliğin ve dişlerin varlığı kontrol edilmelidir. Ayrıca bu deliğin engellenip engellenmediği de örneğin bir matkap ucu ile kontrol edilmelidir.

Presence control of an inside thread and a hole at a gear wheel
The presence of an inside thread and a hole at a gear wheel should be controlled. Furthermore it should be controlled, whether the hole is blocked from e.g. a drill bit.
Data
sheet:


APP N° 404

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metalik dişli çark üzerindeki metal pimin yükseklik ölçümü ve kör deliğin derinlik ölçümü
Metalik dişli çark üzerindeki metal pimin yükseklik ölçümü ve kör deliğin derinlik ölçümü kontrol edilebilir. Ayrıca, dişli çar üzerindeki dişin yüksekliği de ölçülebilir.

Height measurement of a metal pin and of the teeth as well as the depth of a blind hole on a metal gear wheel
The height of a metal pin as well as the depth of a blind hole on a gear wheel should be controlled. Furthermore, the height of the teeth on the gear wheel should be measured.
Data
sheet:


APP N° 403

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Aluminyum döküm bir turbo şarjörün üzerindeki boşluk-boyut ölçümü
Aluminyum döküm bir turbo şarjörün üzerindeki boşluk-boyut ölçülebilir.

Gap size measurement on an aluminum casting of a turbo charger
The gap size on the aluminum housing of a turbo charger should be measured.
Data
sheet:


APP N° 402

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Kablo dış kaplamasının renk kontrolü
Kablo dış kaplamasının renk kontrolü yapılabilir.

Color control of cable jacket
The color of a cable jacket should be controlled.
Data
sheet:


APP N° 401

Automotive Industry (Automobilindustrie)   
Plastik parça bileşeninin üzerinde UV- bağ varlığının kontrolü
Plastik bir parçanın arka yüzeyi üzerindeki UV-yapışkan tabakanın varlığı belirlenebilir. Fakat plastik parçanın ön kısımdaki herhangi bir hatadan kaçınılmalıdır.

Presence control of UV bond on a plastic component
The presence of an UV adhesive layer on the backside of a plastic part should be controlled. A false detection even from the front side of the plastic component must be avoided.
Data
sheet:


APP N° 400

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
İkili-metal şeritlerin kalınlık ölçümü
Bir ikili-metal şeritin kalınlığı hareket sırasındaki temazlık yoluyla ölçülebilir.

Thickness measurement of a bimetal band
The thickness of a bimetal band should be measured contactless during the movement.
Data
sheet:


APP N° 399

Synthetic Industry (Kunststoffindustrie)   
Yarı-geçirgen plastik filmlerin ayırt edilmesi
Yarı-geçirgen plastik filmler ayırt edilebilir.

Differentiation of semitransparent plastic films
Semitransparent plastic films should be differentiated.
Data
sheet:


APP N° 398

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bakır bağlantılar üzerinde küçük metal plakaların varlık kontrolü
Zayıf ve küçük metal plakaların varlığı kontrol edilebilir.

Presence control of small metal plates on a copper contact
The presence of a small and thin metal plate should be detected.
Data
sheet:


APP N° 397

Synthetic Industry (Kunststoffindustrie)   
Plastik bir film içerisindeki oyuğun saptanması
Yarı-geçirgen plastik film içerisindeki girinti-oyuk-çöküntü saptanabilir. Saptama sadece parçanın yukarısından mümkündür.

Detection of a deepening in a plastic film
Depressions in a semitransparent plastic film should be detected. The detection is only possible from above.
Data
sheet:


APP N° 396

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Su bazlı temizleme sistemlerinin floresan kontrolü
Su-yağ bazlı emülsiyonların içerisindeki yağ miktarı kontrol edilebilir. Su bazlı temizleme makinalarında kullanılan temizleme suyu zamanla içerisindeki yağ miktarının artışı ile su-yağ emülsiyonuna dönüşür.

Fluorescence control of water based cleaning systems
The amount of oil in an oil-water based emulsion should be controlled. Over time cleaning water used for water based cleaning machines is changing into an oil-water based emulsion with a steady increase of the content of oil.
Data
sheet:


APP N° 395

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Su bazlı temizleme sistemlerinin bulanıklılık kontrolü
Su bazlı temizleme sistemlerinin bulanıklılık kontrolü gerçekleştirilebilir. Temizleme suyu zamanla toz, makina yağı, küçük metal talaşı içeren su-yağ emülsiyonuna dönüşür.

Turbidity control of water based cleaning systems
The turbidity of cleaning water used for cleaning systems should be controlled. Over time, the cleaning water becomes more and more an oil-in-water emulsion mixed with dirt, grease and small metal swarf.
Data
sheet:


APP N° 394

Automotive Industry (Automobilindustrie)   
Floresan (ışınır) turuncu ve yeşil noktaların-işaretlerin saptanması
Beyaz kaplama üzerine spreylenmiş yeşil ve turuncu floresan noktalar saptanabilir ve ayırt edilebilir.

Detection of a fluorescent green and orange mark
Orange as well as a green fluorescent marks sprayed on a white fleece should be detected and distinguished.
Data
sheet:


APP N° 393

Automotive Industry (Automobilindustrie)   
Arka konsoldaki Velcro bantın varlığının kontrolü
Arka konsoldaki Velcro bantın varlığı kontrol edilebilir.

Presence control of a Velcro® strip on rear shelf
The presence of a Velcro® strip on a hat shelf should be controlled.
Data
sheet:


APP N° 392

Packaging Industry (Verpackungsindustrie)   
Kartonlar üzerindeki platik filmin konumunun kontrolü
Bir karton üzerindeki plastik filmin doğru konumlandırılması gözlemlenebilir. Burada, plastik filmin kartonun üst ucunu yaklaşık 10mm kaplaması gerekir.

Plastic film position control on cartons
The correct position of a plastic film on a carton should be monitored. At this, the plastic film should cover the upper end of the carton around 10mm.
Data
sheet:


APP N° 391

Textile Industry (Textilindustrie)   
Bir kumaş üzerindeki floresan dikiş saptanması
Tekstil endüstrisinde iki kumaşın eklenme yerini belirleyen dikiş, turucu veya yeşil floresan olabilir ve optik sensörle saptanabilir.

Detection of a fluorescent seam on a fabric
A fluorescent seam is used in the textile industry to mark the junction of two fabrics; the seam can be fluorescent in orange or yellow and should be detected with an optical sensor.
Data
sheet:


APP N° 390

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Plastik pencere profillerinin renk kontrolü
Çerçeve olarak kullanılan plastik profillerin rengi kontrol edilebilir.

Color control of plastic window profiles
Plastic profiles which are used for casement frames should be color controlled.
Data
sheet:


APP N° 389

Automotive Industry (Automobilindustrie)   
Kapı kollarının renk kontrolü
Otomotiv alanında, kolların rengi kontrol edilebilir.

Color control of handles
Handles in the automotive field should be color controlled.
Data
sheet:


APP N° 388

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Devre levhası kenarlarının saptanması
80 µm kalınlığa sahip devre levhası kenarları saptanabilir.

Wafer edge detection
The edges of wafers with a thickness of 80µm should be detected.
Data
sheet:


APP N° 387

Automotive Industry (Automobilindustrie)   
İç alandaki suni deri ve kumaşların renk ayrımı
Koyu ve açık suni deri ve kumaşlar,farklı koyu ve açık kısımların renkleri birbirlerine çok yakın fakat yüzey yapılarının fark edilir derecede farklı olduğu durumlarda, ayırt edilebilir.

Color differentiation of leather imitations and fabrics in the interior area
Different dark and light leather imitations and fabrics should be differentiated. The colors of the different dark parts as well as of the light parts are very close, almost the same, but the structure of the respective surface is slightly different.
Data
sheet:


APP N° 386

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Kıvrık metal kısım ve basık-derin parça arasındaki dikey yükseklik kontrolü
Kaynaktan önce , kıvrık metal kısım ve basık-derin parça arasındaki dikey yükseklik hızlıca kontrol edilebilir.

Vertical height control between a turned metal part and a press-bent part
The vertical height between a shiny turned metal part and a press-bent part should be measured immediately before welding.
Data
sheet:


APP N° 385

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Siyah lastik tamponların mesafe kontrolü
Siyah lastik tamponların mesafe kontrolü gerçekleştirilebilir.

Distance control of black rubber buffers
The distance of black rubber buffers should be controlled.
Data
sheet:


APP N° 384

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Soyulmuş şerit kablonun kenarının saptanması
Şerit kablonun lazerle soyulmuş kısımlarının başlangıcı tam olarak saptanabilir.

Detection of the edge of a stripped ribbon cable
The beginning of the laser stripped part of a ribbon cable should be precisely detected.
Data
sheet:


APP N° 383

Automotive Industry (Automobilindustrie)   
100mm mesafeden ultrasonic sensörlerin renginin ayırt edilmesi
100mm mesafeden ultrasonic sensörlerin rengi ayırt edilebilir. Ultrasonik sensörün baş kısmının parlak olmasının hesaba katılması gereklidir.

Color differentiation of ultrasonic sensors at a distance of 100mm
Ultrasonic sensors should be color differentiated at a distance of 100mm. It has to be taken into account, that the surface of the ultrasonic sensor cap is very glossy.
Data
sheet:


APP N° 382

Automotive Industry (Automobilindustrie)   
100mm sensör mesafesinden siyah ve gri kadifelerin ayırt edilmesi
Kadife kılıf içerisindeki siyah ve gri iç parçalarda renk ayrımı 100mm mesafeden yapılabilir.

Differentiation of black and gray velvet at a sensor distance of 100mm
Black and gray interior parts with a velvet casing should be color differentiated at a distance of 100mm.
Data
sheet:


APP N° 381

Automotive Industry (Automobilindustrie)   
100mm mesafeden, verniklenmiş plastik parçaların renk ayrımı
Verniklenmiş plastik parçaların renk ayrımı yapılabilir. Bu parçalar oldukça parlaktır, ayrıca metalik vernik 100mm mesafede kontrol edilebilir.

Color differentiation of lacquered plastic parts at a distance of 100mm
Lacquered plastic parts should be color differentiated. The parts are very glossy and even metallic lacquer should be controlled at a distance of in minimum 100mm.
Data
sheet:


APP N° 380

Automotive Industry (Automobilindustrie)   
100mm mesafeden, iç alandaki plastik parçaların renk ayrımının yapılması
100mm mesafede, iç alandaki plastik parçaların renk ayrımı yapılabilir.

Color differentiation of plastic parts in the interior field at a distance of 100mm
Plastic interior parts should be color differentiated from a distance of 100mm.
Data
sheet:


APP N° 379

Automotive Industry (Automobilindustrie)   
100mm mesafeden, verniklenmiş yüzey üzerindeki geçirgen filmin tespiti
Verniklenmiş parlayan yüzey üzerindeki bir geçirgen film saptanabilir. Plastik filmin belirli bir polarizasyon etkisinin olduğu dikkate alınmalıdır.

Detection of a transparent film on a lacquered surface at a distance of 100mm
A transparent film should be detected on a shiny lacquered surface. It has to be taken into account that the plastic film has a certain polarization effect.
Data
sheet:


APP N° 378

Synthetic Industry (Kunststoffindustrie)   
Enjeksiyon kalıpların renk kontrolü
Enjeksiyon plastik parçalar renk kontrollü olmalıdır. Renklerdekinin yanı sıra plastik parçakarın yüzeyinde de parlaklık faklılıklarının olduğuna dikkat edilmelidir. Sadece dar çerçeveler sabit parlaklık derecesi dağılımına sahiptirler. Bu nedenle, renk kontrolü dar kenarlarda yapılmalıdır.

Color control of injection moldings
Injection plastic parts should be color controlled. It has to be taken into account, that the surface of the plastic part is different in the degree of gloss as well as in the color. Only the narrow frame delivers nearly a constant degree of gloss. Thus, the color should be controlled at the narrow edge.
Data
sheet:


APP N° 377

Automotive Industry (Automobilindustrie)   
Ultrasonik sensörlerin renk ayrımı
Ultrasonik sensörlerin renk ayrımı yapılabilmelidir. Yüzeyin parlak olduğu hesaba katılmalıdır.

Color differentiation of ultrasonic sensors
Ultrasonic sensors should be color differentiated. It has to be taken into account, that the surface is very glossy.
Data
sheet:


APP N° 376

Automotive Industry (Automobilindustrie)   
Kadife yüzeye sahip iç parçaların renk ayrımı
İç alanlar için yapılmış koyu gri ve siyah kadife yüzeylerin renk ayrımı yapılabilmelidir.

Color differentiation of interior components with velvet surface
Parts made for the interior field with a black or dark gray velvet surface should be color differentiated.
Data
sheet:


APP N° 375

Automotive Industry (Automobilindustrie)   
Verniklenmiş plastik bileşenlerin renk ayrımı
Verniklenmiş plastic bileşenlerin renk ayrımı yapılabilir. Yüzeyin parlak olduğu hesaba katılmalıdır.

Color differentiation of lacquered plastic components
Lacquered plastic parts should be differentiated. It should be taken into account, that the surface is very glossy.
Data
sheet:


APP N° 374

Automotive Industry (Automobilindustrie)   
İç alanlarda kullanılan plastik parçaların renk ayrımı
Gri plastik parçaların koyu gri plastik parçalardan ayrımı gerçekleştirilmelidir.

Color differentiation of plastic parts in the interior field
Gray plastic parts should be separated from dark gray plastic parts.
Data
sheet:


APP N° 373

Automotive Industry (Automobilindustrie)   
Verniklenmiş plastik parçaların üzerindeki geçirgen filmin ayırt edilmesi
Verniklenmiş siyah parçalarda olduğu kadar beyaz parçalar üzerindeki geçirgen film de saptanabilir. Siyah ve beyaz yüzeylerin ve aynı zamanda plastik filmin parlak olduğu hesaba katılmalıdır.

Detection of transparent film on lacquered plastic components
A transparent film should be detected on a black as well as white lacquered plastic part. It has to be taken into account, that the white and the black surface are very shiny and the plastic film as well.
Data
sheet:


APP N° 372

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
İç dişlilerin kalite kontrolü
İç dişlilerin diş genişliğinin ve dişler arası boşluğun kontrol edilmesi gereklidir.

Quality control of internal gears
The width of the teeth as well as the gap between the teeth of internal gears should be controlled.
Data
sheet:


APP N° 371

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Krom kaplama levhaların varlığının kontrolü
Metal parça üzerindeki krom kaplama kontrol edilebilir.

Chromium plating presence control
The presence of chromium plating on a metal part should be controlled.
Data
sheet:


APP N° 370

Synthetic Industry (Kunststoffindustrie)   
Beyaz plastik profillerin renk kontrolü
Beyaz plastik profillerin renkleri kontrol edilebilir.

Color control of white plastic profiles
The color of white plastic profiles should be controlled.
Data
sheet:


APP N° 369

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastic film üzerindeki renk işaretinin saptanması
Parlak plastik film üzerindeki bir siyah işaret saptanabilir. Burada, farklı arka plan renklerinin oluşacağı hesaba katılmalıdır.

Color mark detection on plastic film
A black color mark should be detected on a shiny plastic film. At this, it has to be taken into account that different background colors can occur.
Data
sheet:


APP N° 368

Automotive Industry (Automobilindustrie)   
Verniklenmiş metal levhaların konum saptanması
Verniklenmiş farklı metal levhaların kenarları tam olarak saptanabilir. Dahası, boyanmış metal plakaların mesafesi ölçülebilir. Burada, gri skalada bulunan, parlak siyah renkten mat beyaza kadarki renk dizisi hesaba katılmalıdır.

Position detection of lacquered metal sheets
The edge of different lacquered metal sheets should be precisely detected. Furthermore the distance of the painted metal plates should be measured. At this, it has to be taken into account, that a color gamut as well as gray scale range from shiny black to matt white should be covered.
Data
sheet:


APP N° 367

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik bileşenlerdeki ağız varlığının kontrolü
Plastik parçadaki ağız varlığı kontrol edilebilir.

Presence control of a seal in plastic components
The presence of a seal in a plastic part should be controlled.
Data
sheet:


APP N° 366

Glass Industry (Glasindustrie)   
Düz camların renk kontrolü
Geçirgen-ışık modunda, düz camın rengi kontrol edilebilir.

Color control of flat glass
The color of flat glass should be controlled in the transmitted-light mode.
Data
sheet:


APP N° 365

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Verniklenmiş metal levhaların renk kontrolü
Verniklenmiş metal levhaların renk ayrımı yapılabilir. Fakat, metalik boyalar renk kontrollü olmalıdır.

Color control of lacquered metal sheets
Lacquered metal sheets should be color differentiated. Even metallic paints must be color controlled.
Data
sheet:


APP N° 364

Agriculture (Agrarwirtschaft)   
Çiçeklerin olgunluk derecelerinin renkle kontrolü
Çiçeklerin olgunluk derecelerinin renk kontrolü yapılabilir. Çiçeklerin renkleri, onların olgunluğunun belirlenmesindeki en önemli kriterdir.

Color control of the degree of ripeness of flowers
The degree of ripeness of flowers should be controlled. A distinguishing criterion for the degree of ripeness is the color of the flowers.
Data
sheet:


APP N° 363

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal bir çubuğun boy kontrolü
Metal çubuğun boyu kontrol edilebilir. Burada, ölçüm sırasında metal çubuğun ilerleme hızı yaklaşık 2m/s olmalıdır.

Length control of a metal rod
The length of a steel rod should be controlled. At this, the metal rod will be moved with around 2m/s during the measurement.
Data
sheet:


APP N° 362

Synthetic Industry (Kunststoffindustrie)   
Plastik şişeler üzerindeki etiketin varlığının saptanması
Plastik şişeler üzerindeki etiketin varlığı saptanabilir.

Label presence detection on plastic bottles
The presence of a label on plastic bottles should be controlled.
Data
sheet:


APP N° 361

Synthetic Industry (Kunststoffindustrie)   
Plastik önkalıpların renk kontrolü
Plastik önkalıpların rengi kontrol edilebilir. Düzgün parçalar, uygun olmayan parçalardan ayırt edilir.

Plastic preforms color control
The color of plastic preforms should be controlled. Good parts should be differentiated from marginal parts.
Data
sheet:


APP N° 360

Automotive Industry (Automobilindustrie)   
Gri plastik bileşen üzerindeki mavi ve yeşil işaretlerin varlığının belirlenmesi
Gri plastik bileşen üzerindeki mavi ve yeşil işaretin varlığı belirlenebilir.

Presence control of a blue and a green mark on a gray plastic component
A green as well as a blue mark should be present on a gray plastic component.
Data
sheet:


APP N° 359

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Dişi vidalarda vida kilit verniğinin kontrolü
Vidalarda diş kilit sıvısının varlığı kontrol edilebilir.

Screw locking varnish presence control on female threads
The presence of a thread lock fluid should be controlled on inside threads.
Data
sheet:


APP N° 358

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
İşlenmiş ve işlenmemiş metal pimlerin ayırt edilmesi
İşlenmiş ve işlenmemiş metal pimler ayırt edilebilir.

Differentiation of grinded and raw metal pins
Grinded and raw metal pins should be differentiated.
Data
sheet:


APP N° 357

Automotive Industry (Automobilindustrie)   
O-halkaların renk ayrımı
O-halkaların renk ayrımı yapılabilir. O-halkaların yüzeylerinin parlak olduğu hesaba katılmalıdır.

Color differentiation of O-rings
O-rings should be color differentiated. It has to be taken into account, that the surface of the O-ring is very glossy.
Data
sheet:


APP N° 356

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Metal çubukların ayrımnın yapılması
Uç kısımları oluklanmış (şekillendirilmiş) metal çubukların, oluklanmamış metal çubuklardan ayrımı yapılabilir. Dahası, siyah olarak kalmış şekillendirilmiş metal çubuğun, yüzeyi işlenmiş çelik rengindeki metal parçadan ayrımı yapılabilir.

Differentiation of metal rods
Metal rods with an even finish should be differentiated from metal rods with a slotted end. Furthermore a metal rod with a black slotted end should be differentiated from a steel colored end.
Data
sheet:


APP N° 355

Synthetic Industry (Kunststoffindustrie)   
Yarı-geçirgen plastik bir filmin genişlik kontrolü
Yarı-geçirgen plastik bir filmin genişlik kontrolü yapılabilir. Ayrıca, 18,5mm genişlikteki plastik filmin enine sürüklenmesi ±10mm olduğundan saptama aralığı 50mm olmalıdır.

Width control of a semitransparent plastic film
The width of a semitransparent plastic film should be controlled. At this, the transversal drift of the 18.5mm wide plastic film is around ±10mm, thus the detecting range should be 50mm.
Data
sheet:


APP N° 354

Synthetic Industry (Kunststoffindustrie)   
Plastik demetin (flamanın) çap kontrolü
Plastik demetin (flamanın) çapı kontrol edilebilir. Burada, 0.1mm’den 2mm’ye kadar çapa sahip demetlerin çapı kontrol edilebilir.

Diameter control of plastic monofilaments
The diameter of plastic monofilaments should be controlled. At this, monofilaments with diameters starting from 0.1mm up to 2mm are possible.
Data
sheet:


APP N° 353

Synthetic Industry (Kunststoffindustrie)   
Plastik filmlerin çift katman kontrolü
Plastik film sensör sistemi, çift katmandan tek katmana geçişlerde bu geçişle ilgili bilgi veren bir sinyal verir.

Double layer control of plastic films
With a view to the changeover from the double layer to the single layer range of a plastic film a sensor system should deliver exactly a signal which informs about the beginning of the single layer as well as the double layer range.
Data
sheet:


APP N° 352

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal şerit üzerindeki hataların saptanması
Metal şeritler üzerindeki farklı boyutlardaki koyu ve açık hatalar saptanabilir.

Defect detection on metal bands
Dark as well as bright spots with different size should be detected on metal bands.
Data
sheet:


APP N° 351

Automotive Industry (Automobilindustrie)   
Araç emniyet kemeri tokasının renk kontrolü
Araç emniyet kemeri tokasının rengi kontrol edilebilir.

Color control of seat belt plugs
Seat belt plugs should be color differentiated.
Data
sheet:


APP N° 350

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Plastik pimlerin renk kontrolü
Araç emniyet kemerlerinde kullanılan plastik perçinlerin renk kontrolü yapılabilir.

Color control of plastic pins
Plastic pins which are used for seat belts should be color differentiated.
Data
sheet:


APP N° 349

Automotive Industry (Automobilindustrie)   
Araç emniyet kemeri renk kontrolü
Araç emniyet kemeri kumaşının renk kontrolü yapılabilir.

Color control of seat belts
The fabric of the seat belts should be color controlled.
Data
sheet:


APP N° 348

Automotive Industry (Automobilindustrie)   
Araç emniyet kemeri plastiklerinin renk kontrolü
Araç emniyet kemeri plastiklerinin rengi ayırt edilebilir.

Color control of seat belt rubbers
Seat belt rubbers should be color differentiated.
Data
sheet:


APP N° 347

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Araç emniyet kemeri soketlerinin renk kontrolü
Araç emniyet kemeri soketlerinin renk kontrolü gerçekleştirilebilir.

Color control of seat belt sockets
Seat belt sockets should be color controlled.
Data
sheet:


APP N° 346

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Tavan sistemleri için T-Izgaraların renk kontrolü
Tavan sistemleri için T- Izgaraların rengi kontrol edilebilir.

Color control of T-grids for ceiling systems
T-grids used for ceiling systems should be color controlled.
Data
sheet:


APP N° 345

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal teller üzerindeki metal-işleme izlerinin varlığının kontrolü
Bakır renkli bir metal tel üzerindeki küçük metal işleme izlerinin varlığı kontrol edilebilir.

Stamping mark presence control on metal wires
The presence of stamped small lines should be controlled on a copper colored metal wire.
Data
sheet:


APP N° 344

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ahşap kaplamaların çift tabaka kontrolü
Ahşap kaplamaların nakliyesi sırasında, bir yada daga fazla ahşabın kalkıp kalkmadığını sistem üzerinden kontrol edilebilmelidir.

Double sheet control of veneers
During the transportation of veneers, it should be controlled whether one or more than one veneer was picked up from a handling system.
Data
sheet:


APP N° 343

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Sis farı camları üzerindeki marka isminin saptanması
Sis farı camlarının üzerindeki logo saptanabilir. Cam üzerindeki mevcut marka ismi optik bileşen gibi davranmaktadır ve normal camla karşılaştırıldığında, lazer ışınının farklı yönde sapmasına neden olduğu gözlenmiştir.

Detection of a brand name on fog light glasses
A logo should be detected on a fog light glass. It has been shown that the brand name in the glass is acting like an optical component and deflects the laser beam in a different way compared to the normal glass surface.
Data
sheet:


APP N° 342

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik film varlık kontrolü
Mektup zarfı üzerindeki plastik filmin varlığı kontrol edilebilir. UV ışığı varlığında, zarf üzerindeki yapışkan şeridin az da olsa floresan özellik gösterdiği hesaba katılmalıdır. Yapışkan şerit üzerindeki mat film ise yapışkan şeritten farklı olarak bir miktar UV ışığını absorblar.

Plastic film presence control
The presence of a plastic film on an envelope should be controlled. It has to be taken into account that the glue stripe of the envelope is slightly fluorescent in the presence of UV light, whereas the matt plastic film (which covers the glue stripe) absorbs the UV light a bit.
Data
sheet:


APP N° 341

Synthetic Industry (Kunststoffindustrie)   
Plastik filmin bükülme kontrolü
Mat plastik üzerindeki bükülmeler saptanabilir.

Plastic film plunging control
Folds in a matt plastic film should be detected.
Data
sheet:


APP N° 340

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
MDF-plakalar üzerindeki çentiklerin renk kontrolü
MDF-plakalar üzerindeki çentiklerin renk kontrolü gerçekleştirilebilir. Kırılma durumunda MDF arkaplan rengi gözlemlenebilir.

Color control of grooves on MDF plates
Grooves on MDF plates should be color controlled. In case of failure the MDF background color can be seen.
Data
sheet:


APP N° 339

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Metal işleme endüstrisinde bobin sarma ve bobin geri sarma prosesleri üzerinde metal plakaların yükseklik kontrolü
Bobin sarma ve bobin geri sarma üzerinde metal şeritlerin pozisyonları kontrol edilebilir. Burada, metal şeritlerin özellikle de küçük bantların salınım yapması ve ivmelenmesinin yüksek değerde olduğu hesaba katılmalıdır.

Metal sheet height control on rewinders and unwinders in the stamping industry
The position of metal stripes on re- and unwinders should be controlled. At this, it has to be taken into account that the metal stripes, especially the small bands, are oscillating and the acceleration can be very high.
Data
sheet:


APP N° 338

Synthetic Industry (Kunststoffindustrie)   
Plastik filmlerin kalınlık ölçümü
Plastik filmlerin kalınlık ölçümü gerçekleştirilebilir.

Plastic film thickness measurement
The thickness of a plastic film should be measured.
Data
sheet:


APP N° 337

Synthetic Industry (Kunststoffindustrie)   
Bir plastik filmin ön ve arka kısımları arasındaki ayrımın yapılması
Bir plastik filmin parlak olan ön kısmının mat olan arka kısmından ayrımı gerçekleştirilebilir.

Differentiation between front- and backside of a plastic film
The glossy front side of a plastic film should be differentiated from the coarse back side.
Data
sheet:


APP N° 336

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ahşap üzerindeki floresan naktaların saptanması
Ahşap üzerindeki floresan naktalar saptanabilir. Burada, birbirine yakın iki nokta sağlıklı olarak saptanabilir.

Detection of fluorescent marks on wooden board
Fluorescent marks should be detected on wooden boards. At this, two marks which are close together should be proper detected.
Data
sheet:


APP N° 335

Automotive Industry (Automobilindustrie)   
Arka ışık konsolundaki keçe etiketin varlığının saptanması
Arka cam konsolu üzerindeki keçe etiketinin varlığı kontrol edilebilir.

Presence detection of felt label on a backlight shelf
The presence of a felt label on a rear window shelf should be checked.
Data
sheet:


APP N° 334

Automotive Industry (Automobilindustrie)   
Kumaşların ve suni derilerin renklerinin ayırt edilmesi
Otomobil içerisinde kullanılan kumaşlar kadar suni derilerin de renk ayrımı yapılabilir.

Color differentiation of fabrics and leather imitations
Fabrics as well as leather imitations should be differentiated in the automotive interior field.
Data
sheet:


APP N° 333

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Endüstriyel vantilatörlerin frekans kontrolü
Endüstriyel amaçlı vantilatörlerin frekansları kontrol edilebilir. Ayrıca dönme yönü de tayin edilebilir.

Frequency control of industrial ventilators
Ventilators for industrial purposes should be frequency checked. Furthermore the direction of rotation should be controlled.
Data
sheet:


APP N° 332

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Alüminyum profilin süper dikey kesitlerinin saptanması
Alüminyum profilin süper dikey kesitleri saptanabilir.

Detection of super elevations of aluminum profile
Super elevations of aluminum profile should be detected.
Data
sheet:


APP N° 331

Automotive Industry (Automobilindustrie)   
İç parçalar üzerinde kırmızı ve beyaz difüz ışıkların saptanması
İç parçalar üzerinde kırmızı ve beyaz difüz ışıklar saptanabilir.

Detection of red and white diffuse light on interior components
The diffuse red and white light should be detected on interior components.
Data
sheet:


APP N° 330

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Geçirgen plastik film üzerinde geçirgen floresan etiketin saptanması
Geçirgen plastik film üzerinde geçirgen floresan etiket saptanabilir. Etiketin UV-ışığı kullanıldığında geçirgen olduğu hesaba katılmalıdır.

Detection of a transparent fluorescent label on transparent plastic film
A transparent plastic label should be detected on a transparent plastic film. It should be taken into account, that the label is fluorescent in using UV-light.
Data
sheet:


APP N° 329

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Oluklu mukavvanın renk kontrolü
Oluklu mukavvanın renk kontrolü gerçekleştirilebilir. Özellikle siyah bölgeler saptanbilir ve sensör-mukavva arası mesafenin 120mm’ den fazla olması gerekir.

Corrugated cardboard color control
The color of corrugated cardboards should be controlled. Especially black areas should be detected and the distance from the cardboard to the sensor should be larger than 120mm.
Data
sheet:


APP N° 328

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Çift katmanlı kağıdın kontrolü
Çift katmanlı kağıtlar tek katmanlılardan ayırt edilebilir.

Double layered paper sheet control
Double-layered paper sheets should be differentiated from single sheets.
Data
sheet:


APP N° 327

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metalik yüzey üzerindeki kararmış ince tabakanın saptanması
Metalik yüzey üzerindeki kararmış ince tabakalar saptanabilir.

Tarnish film detection on metal band
A tarnish film should be detected on metal band.
Data
sheet:


APP N° 326

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal pim üzerindeki kırmızı yağlayıcının varlığının kontrolü
Metal pim üzerindeki kırmızı yağlayıcının varlığı kontrol edilebilir. Gerekli minimum sensör mesafesi 200mm’ dir.

Presence control of red lubricant on metal pin
The presence of a red lubricant on a metal pin should be controlled. A minimum sensor distance of approx. 200mm is required.
Data
sheet:


APP N° 325

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Örgülü hortum kablo yokluğu ve aşırı gerilme kontrolü
Örgülü hortum içerisindeki tüm kablo tellerinin varlığı kontrol edilebilir. Ayrıca, aşırı gerilme durumu da kontrol edilebilmektedir.

Braided hose wire absence and overstretch control
The presence of all wires inside a braided hose should be controlled. Furthermore it should be controlled, whether the hose is overstretched.
Data
sheet:


APP N° 324

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Örgülü kabloların çaplarında meydana gelen hasarların saptanması
Örgülü kabloların çaplarında meydana gelen hasarlar saptanabilir.

Braided cable sleeves diameter failure detection
Deviations of the diameter of braided sleeves should be detected.
Data
sheet:


APP N° 323

Synthetic Industry (Kunststoffindustrie)   
Siyah ve gri renklendirilmiş iç bileşen doğal fiberlerin renklerinin ayrımı
Siyah ve gri renklendirilmiş iç bileşen doğal fiberlerin kalite kontrolü gerçekleştirilebilir.

Color differentiation of black and gray colored natural fiber interior components
Black and gray colored natural fiber components should be quality controlled.
Data
sheet:


APP N° 322

Automotive Industry (Automobilindustrie)   
Metal kelepçeler üzerindeki sarı şeritin saptanması
Metal kelepçeler üzerindeki sarı şerit saptanabilir.

Detection of a yellow stripe on metal clamps
The presence of a yellow striped on metal clamps should be detected.
Data
sheet:


APP N° 321

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Paketleme kağıdı üzerindeki yapışkan şeridin saptanması
Paketleme kağıdı üzerindeki yapışkan şerit saptanabilir. Burada, UV- ışık kullanıldığında yapışkan floresan özellik gösterir.

Glue line detection on packaging paper
A glue line should be detected on packaging paper. At this, the glue is fluorescent if UV light is used.
Data
sheet:


APP N° 320

Synthetic Industry (Kunststoffindustrie)   
Düşük difüz plastik filmlerin ayrımının yapılması
Geçirgen fakat düşük difüz plastik filmlerin ayrımının yapılması. Puslu plastik filmler kontrol edilebilir.

Differentiation of slightly diffuse plastic films
Transparent but slightly diffuse plastic films should be differentiated. The haze of the plastic films should be controlled.
Data
sheet:


APP N° 319

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Kaplanmış ve kaplanmamış şırıngaların ayırt edilmesi
Kaplanmış ve kaplanmamış şırıngaların birbirlerinden ayırt edilebilir.

Differentiation of coated and uncoated syringes
Coated syringes should be distinguished from uncoated syringes.
Data
sheet:


APP N° 318

Automotive Industry (Automobilindustrie)   
Metal parçalar üzerinde siyah ve gri cila kaplamanın ayırt edilmesi
Spreylenmiş ε-x bölgesinde kaplanmamış metal parçaların, siyah ve gri kaplanmış parçalardan ayrımı gerçekleştirilir.

Detection of black and gray lacquer coat on metal part
In the Ɛx zone of a spray chamber uncoated metal parts should be differentiated from black and gray metal parts.
Data
sheet:


APP N° 317

Packaging Industry (Verpackungsindustrie)   
Biletler üzerindeki floresan renk şeridinin saptanması
Biletler üzerindeki floresan renk şeridi saptanabilir.

Fluorescent color stripe detection on tickets
A fluorescent color stripe on a ticket should be detected.
Data
sheet:


APP N° 316

Automotive Industry (Automobilindustrie)   
Ultrasonic sensör başlarının uzak mesafeden renk ayrımının yapılması
Ultrasonic sensör başlarının renk kontrolü 450mm uzaklıktan gerçekleştirilebilir.

Color differentiation of ultrasonic sensor caps from far distance
The color of ultrasonic sensor caps should be controlled from a distance of 450mm.
Data
sheet:


APP N° 315

Automotive Industry (Automobilindustrie)   
Plastik vidalar üzerinde yapışkan filmin varlığının saptanması
Plastik vida yivleri üzerinde yapışkan filmin varlığı kontrol edilebilir.

Adhesive film presence detection on plastic screws
The presence of an adhesive film should be controlled on the thread of plastic screws.
Data
sheet:


APP N° 314

Automotive Industry (Automobilindustrie)   
Farklı renklendirilmiş ultrasonik sensörlerin ayrımı
Farklı renklendirilmiş ultrasonik sensörlerin ayrımı gerçekleştirilebilir.

Differentiation of different colored ultrasonic sensors
Ultrasonic sensors should be color differentiated.
Data
sheet:


APP N° 313

Automotive Industry (Automobilindustrie)   
İç kısımlarda kullanılan farklı renklendirilmiş plastik parçaların ayırt edilmesi
Farklı renklendirilmiş plastik parçalar ayırt edilebilir.

Differentiation of different colored plastic parts in the interior field
Different colored plastic parts should be differentiated.
Data
sheet:


APP N° 312

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Farklı plastik tüpler üzerindeki farklı renklerin saptanması
Farklı plastik tüpler üzerindeki farklı renkler saptanabilir.

Detection of different color marks on different plastic tubes
Different color marks should be detected on different plastic tubes.
Data
sheet:


APP N° 311

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Aluminyum döküm sırasında oluşan kör yivlerin varlığının kontrolü
Aluminyum döküm sırasında oluşan kör yivlerin varlığı control edilebilir ve ayrıca kör deliklerden ayrımı gerçekleştirilebilir.

Presence control of a blind thread in aluminum casting
An internal thread in an aluminum casting should be detected; furthermore the blind thread should be differentiated from a blind hole.
Data
sheet:


APP N° 310

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Yapışkan bant üzerindeki boşluğun saptanması
Yapışkan bant üzerindeki boşluk saptanabilir.

Detection of a gap on adhesive plaster
The presence of a gap of the tape on an adhesive plaster should be detected.
Data
sheet:


APP N° 309

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Optik fiberlerin renk ayrımı ve optik fiberler üzerindeki renk noktalarının saptanması
Optik fiberler üzerindeki renk ve renk noktaları saptanabilir. Cam fiberlerin beslenme hızı yaklaşık 10m/s’ dir.

Color mark detection on optical fibers and color differentiation of optical fibers
The color as well as a color mark should be detected on optical fibers. The feed speed of the glass fiber is roughly 10 m/s.
Data
sheet:


APP N° 308

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Geçirgen plastik çanta içerisindeki yapışkanın varlığının kontrolü
Geçirgen plastik çanta içerisindeki yapışkanın varlığı kontrol edilebilir. Burada, UV-ışık kullanıldığı takdirde yapışkanın bir kısmı floresan özellik gösterir.

Presence control of plaster in a transparent plastic bag
The presence of plaster in a transparent plastic bag should be controlled. At this, a part of the plaster is fluorescent if UV light is used.
Data
sheet:


APP N° 307

Automotive Industry (Automobilindustrie)   
Otomobil sektöründe kullanılan suni derilerin renk saptaması
Otomobil sektöründe kullanılan suni derilerin rengi saptanabilir ve ayırt edilebilir.

Color Differentiation of leather imitations in the automotive field
Different colored leather imitations should be recognized and differentiated.
Data
sheet:


APP N° 306

Provisions Industry (Lebensmittelindustrie)   
Kahve çekirdeklerinin kavrulma derecesinin renk ile kontrolü
Kavrulmuş kahve çekirdeklerinin rengi kontrol edilebilir. Burada, renk, kahve çekirdeklerinin kavrulma derecesi hakkında bilgi vermektedir.

Color control of the roast level of coffee beans
The color of roasted beans should be control. At this, the color informs about the roast level of the coffee beans.
Data
sheet:


APP N° 305

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Farklı metal işleme şeritleri üzerinde siyah işaretlenmiş kaynak çizgisinin saptanması
Metal işleme şeritleri üzerinde siyah işaretlenmiş kısımlar saptanabilir. Burada, şeritler farklı renk ve yapışkanlıkta olabilirler.

Detection of a black marked welding line on different metal stamping stripes
A black mark should be detected on metal stamping stripe. At this, the stripes can be different in color and gloss.
Data
sheet:


APP N° 304

Glass Industry (Glasindustrie)   
Bir cam plakanın ön kısmından arka kısmının ayırt edilmesi
Mat arka kısma sahip cam plakanın, parlak ön kısmından ayırt edilebilir.

Differentiation of the backside from the front side of a glass plate
The matt backside of a glass plate should be differentiated from the glossy front side.
Data
sheet:


APP N° 303

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Kurşun çerçevelerin tepe yüksekliğinin saptanması
Kurşun çerçeve üzerindeki tepe yüksekliği kontrol edilebilir. Ayrıca geçirgen kaplama da kontrol edilebilir.

Dome height inspection of lead frames
The height of the domes on lead frames should be controlled. Even a transparent coating can be controlled.
Data
sheet:


APP N° 302

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Alüminyum zemin yüzeyi üzerine mesafe ölçümü
Alüminyum zemin yüzeyi üzerine mesafe ölçümü gerçekleştirilebilir. Burada, taşlama açıya yüksek derecede bağlıdır ve lazer yerdeğişim sensörünün kullanımının sonucu olarak yansımada yüksek derecede açıya bağımlıdır.

Distance measurement onto an aluminum ground surface
The distance to an aluminum ground surface should be measured. At this, the grinding is extremely angle-dependent and thus, the consequences in using a laser displacement sensor are that the reflectivity is strongly angle-dependent, too.
Data
sheet:


APP N° 301

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Silikon tüpün ön yüzeyi üzerindeki çıkıntının saptanması
Silikon tüpün ön yüzü üzerindeki çıkıntı saptanabilir. Burada, silikon tüp kendi ekseni etrafında dönerken lazer noktası ön yüzey üzerine yönelir.

Detection of an edge on the front side of a silicon tube
An edge on a silicon tube should be detected. At this, the silicon tube is turning around its own axis while the laser spot of the laser edge detector is directed onto the front side.
Data
sheet:


APP N° 300

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Bej kağıtların renk ayrımı
Bej kağıtların renk ayrımı gerçekleştirilebilir. Burada, saptama alanı yaklaşık 25mm çapa sahip olmalıdır.

Color differentiation of beige papers
Beige colored papers should be color differentiated. At this, the detecting area should be around 25mm in diameter.
Data
sheet:


APP N° 299

Pharmacy (Pharmazie)   
Dallardaki gömmelerin saptanması
Dallardaki gömmeler saptanabilir. Dalların taşınma hızı tıpkı kalınlıkta olduğu gibi incelenen gruptan gruba göre farklılık gösterir. 100mm yükseklikteki çalışma koşullarında saptanabilir.

Detection of embeddings in branches
Embeddings should be detected in branches. The transportation speed as well as the thickness of the branches can be different from batch to batch. A working range of a height of 100mm should be detected.
Data
sheet:


APP N° 298

Automotive Industry (Automobilindustrie)   
İç kullanım bileşenlerinin renk ayrımı
6 farklı renk ayrımı, iç kullanım bileşenleri için uygulanabilir. Sensör mesafesi 50mm civarında olmalıdır ve bu mesafeden yaklaşık 20 mm çapı tarayabilir.

Color differentiation of interior components
Six different interior components should be color differentiated. The sensor distance should be around 50mm and the detecting range of the color sensor at this distance should be approximately 20mm in diameter.
Data
sheet:


APP N° 297

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Plastik bağlantı parçalarının renk ayrımı
Plastik bağlantı parçalarının renk ayrımı gerçekleştirilebilir. Burada, yüzeyin yüksek parlaklık faktörü, üç farklı bileşen arasındaki kontrast farkını azaltmaktadır.

Color differentiation of plastic fittings
The color of plastic fittings should be controlled. At this, the high gloss factor of the surface reduces the contrast difference between the three different components.
Data
sheet:


APP N° 296

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Hızlı hareket eden fiber demetlerin karışıklığının (saçaklık) saptanması
Hızlı hareket eden fiber demetlerinin sahip olduğu karışıklık (saçaklık) saptanabilir. Burada, bir optik fiber, ışın demeti boyunca yol alır ve bu sırada normal plastik fiberler optik fiberlerini kapatmaz. Buna rağmen, şayet bir saçaklanma gözlenirse, optik ışın kısmen uyarılır ve bu alıcı sinyalinde bir azalmaya sebep olur.

Detection of a ravel in a fast moved plastic fiber bundle
A ravel in a fast moved plastic fiber bundle should be detected. At this, an optical fiber through beam head is placed in way, that the normal plastic fiber bundle stream does not cover the optical beam. However, if a ravel appears, the optical beam will be partly interrupted and this leads to a decrease of the receiver signal.
Data
sheet:


APP N° 295

Automotive Industry (Automobilindustrie)   
Siyah kauçuk tutturucu üzerinde floresan kaplamanın saptanması
Siyah kauçuk SEAL üzerine floresan kaplama saptanabilir. Burada, UV aralığında uyarılmış dalga boyuna (365-385 nm) sahip floresan bir kaplama kullanılır. Bu UV- ışık, floresan kaplamadan görünür maviye dönüşecektir.

Detection of a fluorescent coating on black rubber seal
The coating on rubber seal should be detected. At this, a fluorescent coating with an excitation wavelength which lies in the UV range (around 365nm … 385nm) is used. This UV light will be converted from the fluorescent coating into the visible blue range.
Data
sheet:


APP N° 294

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Parlak alüminyum yastığın kalınlık kontrolü
Farklı parlaklıklarda alüminyum yastıkların kalınlıkları ölçülebilir. Bu alüminyum yastıklar ısı yalıtımı amacıyla kullanılırlar. Burada, yastıklar dalgalanma sırasında yüksekliği çok az değişen iletim kemeri üzerinde taşınırlar, böylece kemere olan uzaklık referans olarak kullanılabilir.

Thickness control of shiny aluminum cushions
The thickness of different shiny aluminum cushions should be measured. These aluminum cushions are used for heat insulation. At this, the cushions will be transported on a conveyor belt with a very small fluctuation in height, thus the distance to the belt can be used as a reference.
Data
sheet:


APP N° 293

Automotive Industry (Automobilindustrie)   
Bir takometre plağının renk ve kontrast kontrolü
Siyah takometre kapağının rengi kontrol edilebilir, gri skalada olduğu kadar tolerans sınırı bulunmaktadır.

Color and contrast control of a tachometer sheet
The color of a black tachometer sheet should be controlled; the color as well as the grey scale should remain in a certain tolerance range.
Data
sheet:


APP N° 292

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Plastik ızgaranın varlığının kontrolü
Siyah arka planda beyaz plastik ızgaranın varlığı saptanabilir.

Presence control of a plastic grid
The presence of a white plastic grid on a black background should be detected.
Data
sheet:


APP N° 291

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Kurşun çerçeve parlaklık kontrolü
Kurşun çerçeve parlaklığı kontrol edilebilir. Bu sebeple yarıiletken çipin bulunduğu yüzey boş veya kaba olmalıdır.

Lead frame gloss control
The gloss of lead frames should be controlled. At this, the surface where the semiconductor chip should be placed can be blank or rough.
Data
sheet:


APP N° 290

Glass Industry (Glasindustrie)   
Alt tabanı renklendirilmiş cam şişelerin renk ayrımı
Alt tabanı renklendirilmiş cam şişelerin renk ayrımı gerçekleştirilebilir. Burada 4 farklı renk ayrımı yapılabilir; renksiz, sarı, kırmızı ve mor.

Color differentiation of bottom colored clear glass bottles
Bottom colored clear glass bottles should be differentiated. At this, four different colored bottles can be possible: clear, yellow, red and violet.
Data
sheet:


APP N° 289

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Açısal taşlama disklerinin düzlük kontrolü
Dönüş sırasında açısal taşlama disklerinin düzlüğü kontrol edilebilir.

Evenness control of angle grinder discs
The flatness of angle grinder discs should be controlled during the rotation.
Data
sheet:


APP N° 288

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Alüminyum kılıf üzerindeki bir O-Sealing varlığının kontrolü
Alüminyum kılıf üzerindeki bir O-Sealing varlığının kontrolü gerçekleştirilebilir.

Presence control of an o-ring seal on aluminum casing
The presence of an o-ring seal on aluminum housing should be controlled.
Data
sheet:


APP N° 287

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Alüminyum kaplanmış plastik film üzerinde renk noktalarının saptanması
Alüminyum kaplanmış plastik film üzerinde renk noktaları saptanabilir. Sensör çıkışlarında analog ve dijital sinyaller alınabilir.

Color mark detection on aluminum coated plastic film
Color marks should be detected on aluminum coated plastic foil. An analog as well as a digital signal is required at the sensor output.
Data
sheet:


APP N° 286

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Bir kablo dış kaplamasının parlaklık kontrolü
Bir siyah kablo dış kaplamasının parlaklık kontrolü gerçekleştirilebilir.

Gloss control of a cable jacket
The gloss of a black cable jacket should be controlled.
Data
sheet:


APP N° 285

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Bir kablo koruyucu üzerindeki iplik varlığının kontrolü
Bir kablo demeti üzerindeki iplik varlığı kontrol edilebilir. Burada, koruyucu rengi demetten demete farklılık gösterirken ipliğin rengi beyazdır.

Presence control of a fleece on a cable harness
The presence of a fleece on a cable bundle should be controlled. At this, the color of the harness can differ from batch to batch, whereas the color of the fleece remains white.
Data
sheet:


APP N° 284

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Glass Industry (Glasindustrie)   
Ampul içerisindeki filaman tutucuların konumunun kontrolü
Şeffaf ampülde olduğu gibi kırımızı ampül içerisindeki filaman tutucuların konumları kontrol edilebilir.

Position control of filament holders in bulbs
The position of the filament holders in clear as well as red glass bulbs should be controlled.
Data
sheet:


APP N° 283

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal parçalar üzerindeki yay kilitlerinin konum kontrolü
Birbirine geçmeli metal parçaların konumu kontrol edilebilir.

Position control of spring locks on metal parts
The position of the snap fit of a metal part should be controlled.
Data
sheet:


APP N° 282

Automotive Industry (Automobilindustrie)   
Yığılmış metal boşluklarının hesaplanması
Yığılmış metal boşluklarının hesaplanması doğru bir şekilde kontrol edilebilir.

Counting of stacked metal blanks
The correct number of stacked metal blanks should be controlled.
Data
sheet:


APP N° 281

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Perçin parçalarının çıkarılmasının kontrolü
Perçin parçalarının korunması gerektiğinden dolayı çok küçük perçin parçaları kontrol edilmeli ve sayılmalıdır. Parçaların çıkarılma hızı birkaç m/s değerindedir.

Ejection control of stamping parts
Due to stamping tool protection reasons the ejection of very small stamping parts should be controlled and the parts counted. The ejection speed of the parts is in the range of a few m/s.
Data
sheet:


APP N° 280

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik tüp üzerindeki bir çıkıntı şeklin saptanması
Plastik tüpün dönmesi sırasında tüpün üst kısmındaki çıkıntı saptanabilir.

Detection of an edge on a plastic tube
During the rotation of a plastic tube, an edge on the upper side of the tube should be detected.
Data
sheet:


APP N° 279

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik kapakların renk kontrolü V
Koyu sarı, açık sarı, koyu yeşil ve açık yeşil olmak üzere farklı renklerdeki plastik kapakların renk ayrımı gerçekleştirilebilir.

Color control of plastic screw caps V
Different colored plastic screw caps (dark yellow, light yellow, light green and dark green) should be differentiated.
Data
sheet:


APP N° 278

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik kapakların renk kontrolü IV
Açık mavi, mavi ve lacivert olmak üzere üç farklı renkteki plastik kapakların renk ayrımı yapılabilir.

Color control of plastic screw caps IV
Three different colored plastic screw caps (light blue, blue and dark blue) should be differentiated.
Data
sheet:


APP N° 277

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik kapakların renk kontrolü III
Siyah, açık altın ve koyu altın renkleri olmak üzere 3 farklı renkteki plastik kapakların renk ayırımı yapılabilir.

Color control of plastic screw caps III
Three different colored plastic screw caps (black, light gold and dark gold) should be differentiated.
Data
sheet:


APP N° 276

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik kapakların renk kontrolü II
Beyaz, açık kırmızı ve koyu kırmızı renkleri olmak üzere 3 farklı renkteki plastik kapakların renk ayırımı yapılabilir.

Color control of plastic screw caps II
Three different colored plastic screw caps (white, light red and dark red) should be differentiated.
Data
sheet:


APP N° 275

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik kapakların renk kontrolü I
Açık turuncu, koyu turuncu ve gri renkleri olmak üzere 3 farklı renkteki plastik kapakların renk ayırımı yapılabilir.

Color control of plastic screw caps I
Three different colored plastic screw caps (light orange, dark orange and gray) should be differentiated.


APP N° 274

Automotive Industry (Automobilindustrie)   
Kayan BEARing lerin ikili-metal şeritleri üzerindeki üretim hata noktalarının saptanması
Taşlama öncesinde sliding bear şeritleri üzerindeki chatter noktaları saptanabilir.

Detection of machining marks on bimetallic strips of slide bearings
Chatter marks on slide bearing stripes should be detected immediately before the grinding process.
Data
sheet:


APP N° 273

Synthetic Industry (Kunststoffindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Plastik taslakların renk tonajları farkının saptanması
Plastik taslakların renk tonajları farkı saptanabilir. Burada, birkaç yüz milisaniye için taslak matrisleri durur ve herbir matris için kontrol gerçekleştirilir. Üretim sırasında farklı renklerde taslaklar oluşabilir, bu kontrol sırasında bir rengin diğer renge adaptasyonu kolaylaşır.

Detection of color drifts of plastic preforms
The drift of plastic preforms should be detected during the handling process. At this, the matrix with the preforms stops for a few hundred milliseconds, it is sufficient to check one of the preforms on each matrix. There will be preforms with different colors produced, thus the systems should be easy adapted to another color.
Data
sheet:


APP N° 272

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Plastik zemin döşemesi üzerindeki yapışkan bantın saptanması
Plastik zemin döşemelerin iki ucunu bileştiren yapışkan bant saptanabilir. Burada, plastik zemin rengi yapışkan bantınkinden farklı olabilir; sarı veya kahverengi.

Detection of an adhesive tape on plastic flooring
An adhesive tape, which has the task to combine the two ends of the plastic flooring, should be detected. At this, the plastic flooring can be different in color; the tape, however, is either yellow or brown in color.
Data
sheet:


APP N° 271

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Plastik bir film üzerindeki yapıştırıcının saptanması
Plastik bir film üzerindeki yapıştırıcı tabaka saptanabilir. Neredeyse plastik filmin tüm genişliği kontrol edilebilir. Yapıştırıcı az da olsa UV floresan olmakla birlikte plastik film doğal UV’dir.

Detection of glue on a plastic film
The presence of a glue layer on a plastic film should be detected. Almost the whole width of the plastic film should be controlled. The glue is slightly UV fluorescent, whereas the plastic film is UV neutral.
Data
sheet:


APP N° 270

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Beyaz örtülerin ön ve arka kısmının ayrımının yapılması
Beyaz örtülerin ön kısmından arka kısmının ayrımı yapılabilir. Yapılandırılmamış arka kısmı UV florsanken, plastik yapılandırılmış film floresan değildir, nemli kısımlar floresandır.

Differentiation of front- and backside of a fleece
The front side of a fleece should be differentiated from the back side. The back side (non structured side) is UV fluorescent, whereas the plastic structured film is nonfluorescent and damps the fluorescence.
Data
sheet:


APP N° 269

Automotive Industry (Automobilindustrie)   
İki plastik parçanın renk ayrımının yapılması
İç mekanda kullanılan iki farklı renkteki plastik bileşenlerin renk ayrımı gerçekleştirilebilir.

Color differentiation of two plastic parts
Two different colored plastic components used in the interior field should be differentiated.
Data
sheet:


APP N° 268

Automotive Industry (Automobilindustrie)   
Yüksek açısal hızın yön kontrollü ölçülmesi
Çok hızlı dönen şaftın açı konumu ölçülebilir, ayrıca dönüş yönü kontrol edilebilir.

High speed angle measurement with direction control
The angle position of a very fast rotating shaft should be measured; furthermore the direction of the rotation should be controlled
Data
sheet:


APP N° 267

Synthetic Industry (Kunststoffindustrie)   
Plastik kapların renk ayrımının yapılması
Kırmızı parlak plastik kutunun siyah parlak plastik kutudan renk ayrımı gerçekleştirilebilir. Burada, sensör ile plastik kutu arası mesafe birkaç mm’dir.

Color differentiation of plastic cans
Red glossy plastic cans should be differentiated from black glossy plastic cans. At this, the distance from the sensor to the cans is changing a few mm.
Data
sheet:


APP N° 266

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Siyah metalik olmayan kayışlar üzerindeki noktalı kısımların saptanması
Parlak siyah metalik olmayan kayışlar üzerindeki noktalı kısımlar optik olarak yansıma yoluyla saptanır.

Detection of the section point on black nonmetallic strapping
The section point on a shiny black nonmetallic strapping should be detected optically in the reflective way.
Data
sheet:


APP N° 265

Automotive Industry (Automobilindustrie)   
Parlak plastik kırmızı etiketin saptanması
Siyah plastik bileşen üzerinde bulunan parlak kırımızı plastik etiketin varlığı saptanabilir.

Detection of a red shiny plastic label
The presence of a shiny red plastic label on a black plastic component should be detected.
Data
sheet:


APP N° 264

Automotive Industry (Automobilindustrie)   
Bir alüminyum çubuk üzerinde bulunan kırmızı renkte noktanın saptanması
Metalurjik etkilerden dolayı alüminyum çubuk üzerinde oluşan kırmızı renk noktalar saptanabilir. Burada, renklendirme için kullanılan kırmızı renk farklılık gösterebilir ve ayrıca kısmen sıyrılabilir. Buna ilaveten kırmızı renk oluşmasıyla sonuçlanan alüminyum yüzey oksitlenmesi gerçekleşebilir.

Detection of a red color mark on an aluminum rod
The task is to detect a red color mark on an aluminum rod (the red color mark informs about defect metallurgic domains in the aluminum rod). At this, the red paint which is used for color marking can differ and furthermore it can happen that the color mark is partly scraped. In addition an aluminum surface can be contaminated with rust (comes from a steel band, which is used for fixing the rods in a former process), which drifts also into the red color.
Data
sheet:


APP N° 263

Automotive Industry (Automobilindustrie)   
Siyah ve kahverengi merkez konsollarının renk ayrımı
Siyah ve kahverengi merkez konsollarının renk ayrımı gerçekleştirilebilir. Rengin kontrol edildiği yüzeyin çok parlak olduğu hesaba katılmalıdır.

Color differentiation of a black and brown center console
A black and dark brown plastic center console should be differentiated. It has to be into account, that the surface where the color should be controlled is very shiny.
Data
sheet:


APP N° 262

Automotive Industry (Automobilindustrie)   
Bir konsol içerisindeki kahverengi ve siyah kapaklar arasında renk ayrımı
Bir konsol içerisinde kahverengi plastik kapağın, siyah plastik kapaktan ayrımı gerçekleştirilebilir.

Color differentiation between a brown and a black cap in a console
A brown plastic cap should be differentiated from a black plastic cap in a console.
Data
sheet:


APP N° 261

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
SMD LED’ lerin fazla dolum kontrolü
SMD LED içerisindeki geçirgen döküm bileşen seviyesi fazla dolumdan dolayı kontrol edilebilir.

Overfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with regard to overfilling.
Data
sheet:


APP N° 260

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
SMD LED’ lerin az dolum konrolü
SMD LED içerisindeki geçirgen döküm bileşen seviyesi eksik dolumdan haberdar olmak için kontrol edilebilir.

Underfilling control of SMD LEDs
The level of transparent casting compound in SMD LEDs should be controlled with a view to underfilling.
Data
sheet:


APP N° 259

Provisions Industry (Lebensmittelindustrie)   
Bisküvitlerin renk kontrolü
Bisküvitlerin üretimi sırasında renkleri kontrol edilebilir

Color control of cookies
During the production of cookies the color should be controlled.
Data
sheet:


APP N° 258

Pharmacy (Pharmazie)   
Yarı geçirgen film içerisindeki sıvı seviyesinin kontrolü
Sıvı seviyesi optik sistem ile kontrol edilebilir. Burada, farklı sıvı türleri vardır; su, deterjan ve sütlü sıvılar. Tüp her zaman aynıdır; yarı-geçirgen. Köpük ve sıvı filminin her ikisinin de sıvı seviyesinin belirlenmesini etkilemediği hesaba katılmalıdır.

Liquid level control from liquid in semi transparent tube
The liquid level should be controlled with an optical system. At this, there are different kinds of liquids possible: water, detergent and milky liquids. The tube is always the same: semi transparent. It should be taken into account, that neither foam nor liquid film should influence the detection of the liquid level.
Data
sheet:


APP N° 257

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Kauçuk conta üzerindeki geçirgen kaplamanın saptanması
Kauçuk conta üzerindeki kaplamalar saptanabilir. Burada, aynı sensörle farklı türler kontrol edilebilir, sensörün spot boyutu en küçük kauçuğa göre ayarlanmalıdır ve böylece büyük kauçuklar için de düzenli sonuçlar iletilir.

Detection of transparent coating on rubber seals
The coating of rubber seals should be detected. At this, different types should be controlled with the same sensor, thus the spot size of the sensor must fit to the smallest rubber size and should of course deliver proper results from the bigger seals, too.
Data
sheet:


APP N° 256

Automotive Industry (Automobilindustrie)   
Su soğutma sistemleri için bulaşıkların sayılması
Paketin ilerlemesi sırasında paket içerisindeki bulaşık sayısı hesaplanabilir.

Counting of dishes for water cooling systems
The number of dishes in a package should be counted during the movement of the package.
Data
sheet:


APP N° 255

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Dönen bir metal parça üzerindeki yağ filminin varlığının saptanması
Dönen bir metal parça üzerindeki yağ filminin varlığı saptanabilir.

Detection of the presence of an oil film on a turned metal part
The presence of an oil film without gap should be controlled on a turned metal part.
Data
sheet:


APP N° 254

Automotive Industry (Automobilindustrie)   
Aluminyum yüzey üzerindeki delik noktalarınn saptanması
Alüminyum yüzey üzerindeki delik noktaları saptanabilir.

Detection of punch marks in aluminum surface
Punch marks in aluminum surface should be detected.
Data
sheet:


APP N° 253

Automotive Industry (Automobilindustrie)   
Alüminyum kasa üzerinde baskılanmış mavi noktaların saptanması
Alüminyum kasa üzerinde baskılanmış mavi noktalar saptanabilir. Burada, mavi lakenın dayanım derecesi, rengin nem içeriğine bağlı olarak değişmektedir.

Detection of a stamped blue mark on aluminum housing
A stamped blue mark should be detected on aluminum housing. At this, the degree of strength of the blue lacquer is changing dependent of the moisture content of the color.
Data
sheet:


APP N° 252

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Metalik olmayan beyaz şeritler üzerinde kesim noktasının saptanması
Metalik olmayan beyaz şeritler üzerinde kesim noktası yansıma yoluyla saptanabilir.

Cutoff point detection of white nonmetallic strapping
The cutoff point of white nonmetallic strapping should be detected in a reflective way.
Data
sheet:


APP N° 251

Automotive Industry (Automobilindustrie)   
Plastik iç mekan parçalarının renk ayrımı
Gri, siyah, kahverengi iç mekan parçalarının renk ayrımı gerçekleştirilebilir. Optik fiber başlığı için sadece küçük bir boşluğun olduğu fakat bunun renk sensörünün tamamı için geçerli olmadığı hesaba katılmalıdır.

Color differentiation of plastic interior parts
Gray, black and brown interior plastic parts should be differentiated. It should be taken into account, that there is just a bit space for the optical fiber head, but not for the whole color sensor.
Data
sheet:


APP N° 250

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Siyah anod aluminyum üzerindeki bir astar varlığının kontrolü
Siyah anod alüminyum üzerindeki bir astar kaplamanın varlığı kontrol edilebilir.

Presence control of a primer on black anodized aluminum
The presence of a primer coating on black anodized aluminum should be controlled.
Data
sheet:


APP N° 249

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Sızdırmazlık contasının kontrolü
Alüminyum kasa üzerindeki bir sızdırmazlık contasının varlığı kontrol edilebilir. Boşluklar saptanabilir.

Sealing bead presence control
The presence of a sealing bead on aluminum housing should be controlled. Gaps should be detected.
Data
sheet:


APP N° 248

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Asimetrik bir spiral yayın adım mesafesi kontrolü
Asimetrik bir spiral yayın adım mesafesi kontrol edilebilir.

Attitude control of an asymmetric spiral spring
The attitude of an asymmetric suppressed spring should be controlled.
Data
sheet:


APP N° 247

Textile Industry (Textilindustrie)   
Bir dikiş iğnesi üzerindeki karbon fiberlerin varlığının kontrolü
Bir dikiş iğnesi üzerindeki karbon fiber demetlerinin varlığı kontrol edilebilir. Dikiş iğnesi yönünde sadece sensör için boşluk olduğuna dikkat edilmelidir.

Presence control of carbon fibers on a sewing needle
The presence of a carbon fiber bundle on a sewing needle should be controlled. It has to be taken into account, that there is only space for the sensor in the direction of the sewing needle.
Data
sheet:


APP N° 246

Environmental Technology (Umwelttechnik)   
Bir vana (kanat) üzerindeki astar yüzeyin parlaklık ölçümü
Rüzgar türbinlerinde kanatların astar yüzeyinin parlaklık faktörü ölçümü temassız olmalıdır. Burada, parlaklık sensörü bir robot üzerine monte edilir ve dikey hareket ettirilir, astar yüzeye mesafe yaklaşık 15mm mertebesindedir, kanatlar yatay olarak hareket ettirilir ve böylece parlaklık faktörü tüm kanat ekseni boyunca ölçülür. Normal olarak, bir sonraki kaplamanın uygun olması için kanatların parlaklık faktörü 5’ ten küçük olmalıdır.

Gloss measurement of the primer surface on a vane
The gloss factor of the primer surface of vanes from wind turbines should be measured contactless. At this, the gloss sensor is mounted on a robot and will be moved vertically to make sure, that the distance to the primer surface of the vane remains approximately at 15mm, simultaneously the vane will be moved horizontally so that the gloss factor can be measured along the long axis of the vane. Normally the gloss factor of the primer surface should be lower than 5 in order to guarantee that the following coating get a fix compounding to the primer surface.
Data
sheet:


APP N° 245

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Optik fiber üzerindeki noktaların renk saptaması
Optik fiberler üzerindeki renkli noktalar saptanabilir. Besleme hızı yaklaşık 10m/s olmadır.

Color mark detection on an optical fiber
Color marks should be detected on optical fibers. The rate of feed is around 10m/s.
Data
sheet:


APP N° 244

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Optik fiber üzerindeki kaplamanın renk kontrolü
Optik fiberin kaplama kontrolü gerçekleştirilebilir. Burada, 10 m/s’ ye kadar olan ürün hızında kesikler ve leke saptanabilir.

Color control of the coating of an optical fiber
The coating of an optical fiber should be controlled. At this, cuttings and soiling should be detected, even at a product speed of up to 10m/s.
Data
sheet:


APP N° 243

Textile Industry (Textilindustrie)   
Kumaş üzerindeki bir floresan yivin konumunun kontrolü
Kumaş üzerindeki bir floresan yivin konumu kontrol edilebilir. Floresan malzemenin uyarılması için UV-ışık ( 365nm-385nm ) gereklidir. Floresan malzeme görünür ışık skalasındaki ışığı emer. (Yeşil).

Position control of a fluorescent thread in a fabric
The position of a fluorescent thread in a fabric should be controlled. UV light (365nm to 385nm) is necessary for excitation of the fluorescent material. The fluorescent material emits light in the visible range (green).
Data
sheet:


APP N° 242

Synthetic Industry (Kunststoffindustrie)   
Bir optik geçirgen plastik filmin varlığının kontrolü
Bir optik geçirgen plastik filmin varlığı kontrol edilebilir. Burada, sensörün plastik filme mesafesi minimum 1m olmalıdır ve plastik filmin birkaç milimetrede titreme yapabileceği düşünülmelidir.

Presence control of an optical transparent plastic film
The presence of a transparent plastic film should be controlled. At this, the distance of the sensor to the plastic film should be in minimum 1m and it should be noticed, that the plastic film can flutter a few millimeters.
Data
sheet:


APP N° 241

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik film etiketleri üzerindeki renkli noktaların saptanması
Plastik film etiketleri üzerindeki siyah noktanın farkına varılabilir. Burada, renkli noktaların geçirgen arkaplandan olduğu kadar boyalı kısımdan da ayrımı yapılabilir.

Color mark detection on plastic film labels
A black color mark on a plastic film label should be recognized. At this, the color mark must be differentiated from transparent background as well as from the printed part.
Data
sheet:


APP N° 240

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Tekerleğin konsantrik sapmasının kontrolü
Yüksek hızlı tekerleğin konsantrik sapması kontrol edilebilir.

Concentric runout control of a wheel
The concentricity of a high speed wheel should be controlled.
Data
sheet:


APP N° 239

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Geçirgen bir film üzerindeki renkli noktanın saptanması
Geçirgen bir film üzerindeki renkli nokta saptanabilir. Kullanılan sensör εx- skalasındadır ve bu nedenle bir optik fiber ünitesi gereklidir.

Detection of a color mark on a transparent plastic film
A color mark on a transparent plastic film should be detected. The sensor is used in the Ɛx – range, thus, an optical fiber unit is necessary.
Data
sheet:


APP N° 238

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir makara taşıyıcı yüzey üzerine çizgi gravür tespiti
Siyah bir kasnak ve yatak yüzeyinde bir oyulmuş çizgi tespit edilebilir.

Detection of a line engraving on the bearing surface of a pulley
An engraved line on the bearing surface of a black pulley should be detected.
Data
sheet:


APP N° 237

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Renkli noktanın konumunun kontrolü
Alüminyum folyo ve plastik film üzerindeki renkli noktaların konumu kontrol edilebilir. Burada, sensör sistemi, renkli noktanın konumuna göre analog bir sinyal gönderir. Burada, arkaplanda olduğu gibi renkli noktada da renk değişimi demetten demete göre değişir. Bu, elle kolay yönlendirilebilir esnek bir sistem gerekliliği anlamına gelir. Dijital çıkışın yanında ( Işık kaynağının renkli noktanın %50’ sini örttüğü anda sinyal değişimi olur ) analog çıkış da arzulanır. Renkli noktanın konumu hakkında bilgi veren voltaj değerleri:
5V; ışık renkli noktanın %50’ sini örter.
0V: Işık sadece arkaplanda üzerindedir.
10V: Işık sadece renkli nokta üzerindedir.

Color mark position control
The position of printed color marks on aluminum foils and plastic films should be controlled. At this, the sensor system should deliver an analogue signal which is proportional to the position of the color mark. At this, the color of the background as well as of the color mark can change from batch to batch, which means, that a flexible “easy to handle” system is required. Beside the digital output (a signal change should happen if the light spot is covered by 50% of the color mark) there is an analog output desired, which informs about the actual position of the color mark: 5V means, that the light spot covers to 50% the color mark and 0V and 10V shows, that the light spot falls either only onto the background or onto the color mark.
Data
sheet:


APP N° 236

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Örgülenmiş kabloda yalıtılmamış kablonun saptanması
Örgülenmiş kabloda yalıtılmamış kablo saptanabilir.

Detection of uninsulated cables in a twisted cable assembly
Uninsulated cables should be detected in a twisted cable assembly.
Data
sheet:


APP N° 235

Automotive Industry (Automobilindustrie)   
Sprey ile verniklenmiş plastik parçaların renk ayrımı
İki farklı renklendirilmiş plastik parçanın ayrımı yapılabilir.

Color differentiation of spray lacquered plastic parts
Two different colored plastic components should be distinguished.
Data
sheet:


APP N° 234

Textile Industry (Textilindustrie)   
Kumaş kenarı algılama
Geniş örgülü kumaş yan pozisyonda 20 mm sınırında kontrol edilebilir. Gerekli hassasiyet ± 2 mm ve analog çıkış sinyalinin bant genişliği birkaç Hz olmalıdır.

Edge detection of a fabric
The lateral position of a wide-meshed fabric should be controlled in a range of 20mm. At this, the necessary accuracy should be ±2mm and the bandwidth of the analogue output signal has to be a few Hz.
Data
sheet:


APP N° 233

Packaging Industry (Verpackungsindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Metal folyo paketler üzerindeki floresan etiketlerin saptanması
Altın ve gümüş rengindeki metal folyo kutularının ön yüzeyinde olduğu gibi arka yüzeyindeki kağıttan etiketlerin varlığı saptanabilir. Burada, basit kağıt etiketin malzemesi floresandır ve bu nedenle UV renk sensörü kullanılmalıdır.

Fluorescent label detection on metal foil packages
The presence of paper labels on the front- as well as on the backside of golden and silver colored metal foil boxes should be detected. At this, the basic material of the paper labels is fluorescent, thus a UV – color sensor should be used.
Data
sheet:


APP N° 232

Glass Industry (Glasindustrie)   
Cam çubukların çap ölçümü ve konum kontrolü
Optik fiberlerin başlangıç ürünü olan cam çubukların çap ölçümü yapılabilir ve konumu saptanabilir. Cam çubukların tipik çap değerleri 20mm-90mm aralığındadır.

Diameter measurement and position control of glass rods
The diameter as well as the position of glass rods, the starting product of optical fibers, should be measured. Typical diameters of glass rods are in the range of 20mm to 90mm.
Data
sheet:


APP N° 231

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Geçirgen renkli plastik contalar üzerindeki harelerin saptanması
Geçirgen renkli plastik contalar üzerindeki hareler saptanabilir.

Schlieren detection on transparent colored plastic closures
Schlieren on transparent colored plastic closures should be detected.
Data
sheet:


APP N° 230

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Geçirgen plastik kapakların renk kontrolü
Geçirgen plastik kapakların rengi kontrol edilebilir. Burada, farklı renklerde geçirgen kapaklar üretilebilir ve amaç üretimin kesin bir renk aralığında olmasıdır.

Color control of transparent plastic closures
The color of transparent plastic closures should be controlled. At this, different colored transparent closures (e.g. orange, violet, magenta) will be produced and the task is to hold the respective color in a certain range.
Data
sheet:


APP N° 229

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Kaygan yatakların kabukları üzerinde renkli noktaların saptanması
Kaygan yatakların kabukları üzerinde, kırmızı, yeşil ve sarı renk noktalarının olduğu gibi renksiz kısımların da saptanması gerçekleştirilebilir ve ayrımı yapılabilir. Kısmen kaldırılmış olsa da renkli noktaların saptanması hesaba katılmalıdır.

Detection of color marks on slide bearing shells
Red, green and yellow color marks as well as no color mark on slide bearing shells should be detected and distinguished. It should be taken into account that the color mark should be detected even if it is partially removed.
Data
sheet:


APP N° 228

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Kemer makarasının eksantrik kontrolü
Kemer makarasının eksantrik kontrolü gerçekleştirilebilir. Makara genişliği tüm daire boyunca hesaplanabilir.

Eccentricity control of belt pulley
The eccentricity of belt pulley should be controlled. The dimension x should be controlled over the whole circle.
Data
sheet:


APP N° 227

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Üretim sırasındaki farklı tellerin çaplarının kontrolü
Üretim prosesi sırasındaki farklı tellerin çaplarının kontrolü gerçekleştirilebilir.

Diameter control of different wires during the production
The diameter of different metal wires should be controlled during the production process.
Data
sheet:


APP N° 226

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Holografik geçirgen filmin renk kontrolü
Üretimi sırasında holografik geçirgen filmin renk kontrolü içerden gerçekleştirilebilir. Burada, ışık holografik film üzerine dik düşmesi durumunda, renk sadece dikey eksene 30o açıyla saptanabilir. Ayrıca, ön-uç holografik film ilerleme yönüne dik olarak yönlenmelidir.

Color control of a holographic transparent film
During the production of a holographic transparent film the color should be inline controlled. At this the color can only be detected under an angle of 30° to the vertical axis if the light falls perpendicular onto the holographic film. Furthermore the frontend should be directed perpendicular to the transport direction of the holographic film.
Data
sheet:


APP N° 225

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
İç mekanda kullanılan 3 farklı plastik bileşenin renk ayrımı
3 farklı plastik bileşenin renk ayrımı gerçekleştirilebilir.

Color differentiation of three different plastic components in the interior field
Three different colored plastic parts should be differentiated.
Data
sheet:


APP N° 224

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Farklı duvar kalınlıklarına sahip plastik şişelerin ayrımının gerçekleştirilmesi
Farklı duvar kalınlıklarına sahip plastik şişelerin ayrımı gerçekleştirilebilir.

Differentiation of plastic bottles with different wall thickness
Plastic bottles with different wall thickness should be differentiated.
Data
sheet:


APP N° 223

Synthetic Industry (Kunststoffindustrie)   
Plastik süzgecin renk kalite kontrolü
Yeşil ve kırmızı plastik süzgecin kalite kontrolü gerçekleştirilebilir.

Color quality control of plastic strainer
The quality of green as well of red plastic strainer should be controlled.
Data
sheet:


APP N° 222

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir enjeksiyon iğnesi üzerinde manşon varlığının kontrolü
Bir enjeksiyon iğnesi üzerinde manşon varlığının kontrolü gerçekleştirilebilir.

Sleeve presence control on an injection needle
The presence of a sleeve on an injection needle should be controlled.
Data
sheet:


APP N° 221

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir elektrik bileşeninde gresin varlığının kontrolü
Bir elektrik bileşende metal parça üzerindeki gresin varlığının kontrolü gerçekleştirilebilir.

Presence control of grease in an electrical component
The presence of grease on a metal part inside an electrical component should be checked.
Data
sheet:


APP N° 220

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Bir keçe şerit üzerinde doku kafesinin varlığının kontrolü
Bir keçe şerit üzerinde doku kafesinin varlığının kontrolü gerçekleştirilebilir.

Lattice texture presence control on a fleece stripe
The presence of a lattice texture on a fleece stripe should be controlled.
Data
sheet:


APP N° 219

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Baskılanmış yarı-geçirgen plastik film üzerinde çizgi saptaması
Yarı-geçirgen plastik film üzerinde mevcut altın rengi çizgi saptanabilir.

Line detection on printed semi transparent plastic film
A golden colored line should be detected on a semi transparent plastic film.
Data
sheet:


APP N° 218

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Çerçeve bağlantılarının yüzey kontrolü
Farklı alanlarda kullanılan çerçeve bağlantı elemanlarının renk parlaklığı kontrol edilebilir.

Surface control of frame joints
The surface of several hinge-joints should be color-gloss controlled on different areas.
Data
sheet:


APP N° 217

Glass Industry (Glasindustrie)   
Bir cam plakanın parlatılmış halinin parlatılmamış halinden ayrımının yapılması
Cam parçanın parlatma sırasında parlatılmış yüzeyi kontrol edilebilir.

Differentiation of the polished surface from the grinded surface of a glass plate
During the handling of glass plates the position of the polished surface must be controlled.
Data
sheet:


APP N° 216

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir alüminyum plaka üzerinde kağıt tabakasının varlık kontrolü
Farklı renklerdeki alüminyum plakalar üzerindeki kağıt tabakası kontrol edilebilir.

Presence control of a paper sheet on an aluminum plate
The presence of a paper sheet on different colored aluminum plates should be controlled.
Data
sheet:


APP N° 215

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Kontak halinde olmayan metal plakaların kalınlık ölçümü
Kontak halinde olmayan metal plakaların kalınlık ölçümü gerçekleştirilebilir.

Noncontact thickness measurement of metal sheets
The thickness of metal sheets should be measured, but contactless.
Data
sheet:


APP N° 214

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Lamine üzerinde son UV-floresan kaplamanın varlığının kontrolü
Bir laminenin en üst tabakanın varlığı kontrol edilebilir. Burada, tabakanın UV olması gereklidir.

Detection of the presence of final UV fluorescent coating of laminate
The presence of the upper layer of a laminate should be controlled. At this, the layer is UV fluorescent.
Data
sheet:


APP N° 213

Chemical Industry (Chemische Industrie)   
Bir sıvı üzerinde köpük varlığının saptanması
Bir sıvı üzerinde köpük varlığı saptanabilir. Ayrıca, sıvı seviyesi de, varsa köpükle aynı anda, ölçülebilir.

Detection of the presence of foam on a liquid
The presence of the foam on a liquid should be detected. Furthermore the liquid level (+ foam, if present) should be measured simultaneously.
Data
sheet:


APP N° 212

Packaging Industry (Verpackungsindustrie)   
Baskılanmış sigara kutuları üzerindeki floresan etiketlerin saptanması
Baskılanmış sigara kartonun yapışkan yüzeyi floresan etiket ile işaretlenebilir. Amaç, bu floresan etiketi saptamaktır.

Detection of fluorescent labels on printed cigarette box paper
An adhesion surface area of printed cigarette box paper is marked with a fluorescent label. The task is to detect this fluorescent label.
Data
sheet:


APP N° 211

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Çelik teller üzerinde bal mumu kaplamanın varlığının kontrolü
Çelik teller üzerinde bal mumu kaplamanın varlığının kontrolü gerçekleştirilebilir. Bal mumu, floresan eklemeler ile desteklidir.

Presence control of wax coating on steel wire ropes
The presence of wax coating on steel wire ropes should be controlled. The wax is supplied with fluorescent additives.
Data
sheet:


APP N° 210

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
Otomobil endüstrisinde kullanılan perçin parçalarının çift tabaka kontrolü
Metal parçaların işlenmesi sırasında bir yerine daha fazla parçanın robot tarafından emilmesi gerek.

Double sheet control of stamping parts in the automotive industry
During the handling process of stamped metal parts it happens, that instead of one part two or more parts will be sucked up from a robot.
Data
sheet:


APP N° 209

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Kesici halkaların parlaklık kontrolü
Kesici halkaların parlaklık kontrolü gerçekleştirilebilir. Parlaklık farkı olan iki parçanın birbirinden ayrımı gerçekleştirilebilir.

Gloss control of cutting rings
The gloss of cutting rings should be controlled. Two components, different in gloss, should be distinguished.
Data
sheet:


APP N° 208

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir metal plaka üzerinde ışığa duyarlı şeritin saptanması
Bir metal plaka üzerinde ışığa duyarlı şerit saptanabilir. Burada, görünür bölgedeki ışık kaynağı kullanılamaz.

Detection of a photosensitive stripe on a metal plate
A photosensitive stripe should be detected on a metal sheet. At this, lightning sources which are working in the visible range cannot be used.
Data
sheet:


APP N° 207

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir konveyör bant içinde ardışık hijyen ürünlerinin taşınırken arasındaki boşluğun tespiti
Pedler iki kemer arasında taşınacaktır. Sonu kadar başlangıcı da tespit edilebilir. Dahası, ardışık iki ped arasındaki boşluk tespit edilebilir. Tek uygulanabilirlik olasılığı iki taşıyıcı bant ile bakmaktır.

Detection of a gap between successive hygiene articles during the transportation in a conveyor belt
Panty liners will be transported between two belts. The beginning as well as the end of a panty liner should be detected. Furthermore, a gap between two successive panty liners should be detected. The only practicable possibility is to look through the two conveyor belts.
Data
sheet:


APP N° 206

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Kahverengi plastik kapı lambirisinde renk ayrımı
İki farklı kahverengi plastik lambiri ayırt edilebilir.

Color differentiation of brown plastic door seals
Two different brown colored plastic seals should be differentiated.
Data
sheet:


APP N° 205

Synthetic Industry (Kunststoffindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Plastik şeritlerin renk ayrımının yapılması
Farklı renklerdeki plastik şeritlerin renk ayrımı yapılabilir.

Color differentiation of plastic stripes
Different colored plastic stripes should be differentiated.
Data
sheet:


APP N° 204

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Vidaların yanyana hizalanmasının saptanması
Vidaların yanyana hizalanması saptanabilir.

Detection of the alignment of a screw
The alignment of screws in a mechanical guide should be controlled.
Data
sheet:


APP N° 203

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir enjeksiyon iğnesi üzerinde manşon varlığının kontrolü
Bir enjeksiyon iğnesi üzerinde manşon varlığı kontrol edilebilir.

Presence control of the sleeve on an injection needle
The presence of a sleeve should be controlled.
Data
sheet:


APP N° 202

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Bir alüminyum folyo üzerinde baskılanmış referans noktasının saptanması
Bir alüminyum folyo üzerinde lazer baskılanmış referans noktası saptanabilir. Burada, alüminyum folyonun maksimum beslenme hızı yaklaşık 60m/dak olmalıdır.

Detection of a printed reference mark on an aluminum foil
A lasered reference mark on an aluminum foil should be detected. At this, the maximum rate of feed of the aluminum foil is approximately 60m/min.
Data
sheet:


APP N° 201

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik kapakların renk kontrolü
Plastik kapakların renk kontrolü gerçekleştirilebilir. Burada amaç, farklı renklarin saptanması değil, renk aralığının belli bir tolerans aralığında olmasını sağlamaktır.

Color control of plastic closures
The color of plastic closures should be controlled. The main task is not to distinguish between different colors but to check, whether the same closure is in a certain color tolerance.
Data
sheet:


APP N° 200

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
PET taslaklarının renk kontrolü
Şişeleme endüstrisinde kullanılan farklı renklerdeki PET taslaklarının renk ayrımı yapılabilir.

Color control of PET preforms
Different colored PET preforms which are used in the bottle industry should be differentiated.
Data
sheet:


APP N° 199

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir alüminyum folyo üzerinde lazerle işaretlenmiş referansın saptanması ve lazer şeritten ayrımının yapılması
Bir parlak alüminyum folyo üzerinde lazer referans işareti saptanabilir. Saptanan referans noktasının, referans şerit olmadığı saptama garanti edilebilir.

Detection of a lasered reference mark on an aluminum foil and differentiation from a lasered stripe
A lasered reference mark on a shiny aluminum foil should be detected. A proper detection of the reference mark should be guaranteed, which means, that the lasered stripe must not be detected as a reference mark.
Data
sheet:


APP N° 198

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir laboratuar cam tüpü içerisindeki kan renginin kontrolü
Farklı sıvı seviyesine sahip laboratuar cam tüpü içerisindeki kanın renk kontrolü gerçekleştirilebilir.

Color control of blood in a laboratory glass
Blood in a laboratory glass with different liquid level should be color controlled.
Data
sheet:


APP N° 197

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Aşındırıcı malzemenin sıralı renk kontrolü
Aşındırıcı malzemenin sıralı renk kontrolü gerçekleştirilebilir.

Inline color control of abrasive material
Abrasive band material should be inline color controlled.
Data
sheet:


APP N° 196

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Plastik çevrelenmiş perçin parçaları üzerindeki elektrik temasının optik olarak kontrolü
Perçin parçalarının elektrik kontaklarındaki hata, plastik ince bir film tarafından kaplanması sonucunda ortaya çıkmaktadır. Bu sorun optik bir sistemle saptanabilir.

Optical control of electrical contacts on a partly plastic covered stamping part
In the error case the electrical contacts of a stamping part can be slightly covered with a thin plastic film. This should be detected with an optical system.
Data
sheet:


APP N° 195

Chemical Industry (Chemische Industrie)   
Floresan yağın renk ayrımı
Motorlarda kullanılan farklı yağ tiplerinin ayrımı gerçekleştirilebilir. Burada, mineral yağın UV floresanının doğal etkisi kullanılır. Ayrıca, mineral yağa bir miktar floresan sıvı eklenebilir ve bu uygun türlerin ayrımını sağlar.

Color differentiation of fluorescent oil
Different oil types which are used for engines should be differentiated. At this, the natural effect of UV fluorescence of mineral oil is used. Furthermore fluorescent liquid will be added to some of the mineral oils, which allows a differentiation of the adequate types.
Data
sheet:


APP N° 194

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir aluminyum jantta kenarın saptanması
Bir alüminyum jantta kenar saptanabilir. Alüminyum jantın dönüş hızı yaklaşık 50 rpm olmalıdır.

Detection of an edge in an aluminum wheel rim
The edge in an aluminum wheel rim should be detected. The speed of the wheel rim is around 50 rpm.
Data
sheet:


APP N° 193

Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir metal plaka matris üzerinde floresan noktanın saptanması
Bir metal plaka matris üzerinde floresan nokta saptanabilir.

Detection of a fluorescent mark on a metal sheet matrix
A fluorescent mark on the top side of a metal sheet matrix should be detected.
Data
sheet:


APP N° 192

Automotive Industry (Automobilindustrie)   
Lastik bir conta üzerinde floresan filmin varlığının kontrolü
Araç kapıları için kullanılan lastik contalar, ince floresan film ile kaplanır. Bu filmin üretim sırasında varlığı kontrol edilir.

Control of the presence of a fluorescent film on a rubber lip
A rubber lip for car doors is coated with a thin fluorescent film. The presence of this film should be checked during the production.
Data
sheet:


APP N° 191

Automotive Industry (Automobilindustrie)   
Ultrasonik sensörlerin renk ayrımının yapılması
Otomotiv endüstrisinde kullanılan ultrasonik sensörlerin renk ayrımı yapılabilir. Burada, ultrasonik sensörlerin parlak yüzeyleri yüksek direkt yansıma gösterirler.

Color differentiation of ultrasonic sensors
Ultrasonic sensors for the automotive industry should be color differentiated. At this, the shiny surface of the ultrasonic sensors causes normally a high direct reflection.
Data
sheet:


APP N° 190

Textile Industry (Textilindustrie)   
Dokuma kumaş üzerindeki boşlukların saptanması
Dokuma kumaş üzerindeki boşluklar saptanabilir. Burada, açıktan koyuya farklı renklerde ayrım mümkündür.

Detection of a gap in a fabric
In a fabric a gap should be detected. At this different colored fabric (from dark to bright) are possible.
Data
sheet:


APP N° 189

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Altın kaplanmış telin sıralı renk kontrolü
Altın kaplanmış tellerin üretim prosesi sırasında kontrolü gerçekleştirilebilir. Ayrıca, çizik gibi lokal hatalar saptanabilir. Burada, telin üretim hızı yaklaşık 10 m/s ‘dir.

Inline color control of a golden coated wire
A golden coated wire should be controlled during the production process. Furthermore, local defects like grooves should be detected. At this, the production speed of the wire is approximately 10 m/s.
Data
sheet:


APP N° 188

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Yalıtkan kabloların sıralı renk kontrolü
Plastik bir yalıtkan üretimi sırasında rengi kontrol edilebilir. Burada, parlaklık değişen sıcaklık ve nem miktarına göre değişiklik gösterir. Ayrıca, yüzeyin parlaklığından bağımsız olan sensör kullanılır.

Inline color control of insulated cables
During the production the color of a plastic insulation should be controlled (e.g. brown and red insulated cables). At this the gloss of the plastic surface can be changing due to temperature and humidity changes. Therefore a sensor should be used which is independent of the gloss of the surface.
Data
sheet:


APP N° 187

Synthetic Industry (Kunststoffindustrie)   
Optik plastik film üzerinde optik geçirgen plastik etiketin konumunun saptanması
Optik geçirgen plastik film üzerinde optik geçirgen plastik etiketin konumu saptanabilir. Burada, filmin hızı birkaç m/s civarında olmalıdır.

Detection of the position of optical transparent plastic label on optical transparent plastic film
The position of a transparent label on a transparent film should be detected. At this the speed of the film is in the range of a few m/s.
Data
sheet:


APP N° 186

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir metal şerit üzerinde kaynak çizgisinin saptanması
Bir metal şerit üzerinde kaynak çizgisi saptanabilir. Burada eski kaynak çizgisi ve diğer kaynak çizgileri farklı görünebilir.

Welding line detection on a metal stripe
A welding line on a metal stripe should be detected. At this, the welding line looks different, even a grinded welding line is possible.
Data
sheet:


APP N° 185

Environmental Technology (Umwelttechnik)   
Bir fotovoltaik panelin camsı yüzeyinin parlaklık kontrolü
Bir fotovoltaik panelin camsı yüzeyinin üretimi sırasında parlaklık faktörü ölçülebilir.

Gloss measurement of the glass surface of a photo voltaic panel
The gloss factor of the glass cover of a photo voltaic panel should be measured during the production.
Data
sheet:


APP N° 184

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Keçe malzemenin çift katman kontrolü
Keçe malzemenin tek katmanlısının çift katmalıdan ayrımı gerçekleştirilebilir.

Double layer control of fleece material
It should be differentiated between one and two layers of a fleece material.
Data
sheet:


APP N° 183

Automotive Industry (Automobilindustrie)   
Ses sönümleme halısının ön ve arka yüzeyinin ayrımı
Bir ses sönümleme halısının ön ve arka yüzeyinin birbirlerinden ayrımı gerçekleştirilebilir.

Differentiation of front side and back side from a sound damping carpet
The front side should be distinguished from the back side of a sound damping carpet.
Data
sheet:


APP N° 182

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Bir MDF plaka üzerindeki renk çizgisinin saptaması
Bir MDF plaka üzerindeki kırmızı renk çizgisinin saptanması gerçekleştirilebilir. Burada, çizgi şeridinin yoğunluk ve rengi farklılık gösterir. Ayrıca, MDF plakanın yüzey yapısı kabadan iyiye doğru değişir.

Detection of a colored line on a MDF plate
A red colored line should be detected on the surface of a MDF plate. At this, the color of the stripe differs in intensity and slightly in color. Furthermore the structure of the MDF surface can also changing from coarse to fine.
Data
sheet:


APP N° 181

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Pirinç kaplanmış çelik tellerin renk kontrolü
Pirinç kaplanmış çelik tellerin kalite kontrolü gerçekleştirilebilir. Burada, telin rengi kaplamanın kalınlığı hakkında bilgi verir.

Color control of brass coated steel wires
The quality of brass coated steel wires should be controlled. At this, the color of the wire delivers information about the thickness of the coating.
Data
sheet:


APP N° 180

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik bir film üzerinde deliğin saptanması
Plastik bir film üzerinde delik saptanabilir. Burada, plastik filmin hızı birkaç m/s ve plastik üzerindeki deliklerin çapları yaklaşık 0.3 mm olmadır.

Detection of a perforation line in a plastic film
A perforation line should be detected in a plastic film. At this, the speed of the plastic film is a few m/s and the diameter of the holes in the plastic film is approximately 0.3mm.
Data
sheet:


APP N° 179

Automotive Industry (Automobilindustrie)   
Deri ve suni deri bileşenlerinin dikişinin saptanması
Deri ve suni deri bileşenlerinin dikişleri saptanabilir.

Detection of the seam of leather and leather imitation components
The seam of leather and leather imitation components should be detected.
Data
sheet:


APP N° 178

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik film üzerinde plastik etiketin kenar kontrolü
Plastik film üzerinde plastik etiketin kenarı tespit edilmelidir.

Edge detection of a plastic label on a plastic film
The edge of a plastic label should be detected on a plastic film.
Data
sheet:


APP N° 177

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Jant üzerindeki bir bağlantı arayüzünün saptanması
Aluminyum bir jant üzerindeki bağlantı arayüzü saptanabilir. Burada, jantın dönme hızı 50 rpm olmalıdır.

Detection of a joint on a wheel rim
A joint on an aluminum wheel rim should be detected. At this, the wheel is rotating with a speed of 50 rpm.
Data
sheet:


APP N° 176

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Plastik Şişelerde Renk Ayırt Etme
PET Şişelerin renkleri geri dönüşüm sürecinde ayırt edilmelidir. Mavi açık renkli plastik şişeler açık renkli saydam PET şişelerden ayırt edilebilmelidir. Şişelerin hızı birkaç m/s’dir. Şişerin içinde birikmiş su damlarlarının birikmesinden dolayı yoğunlaşma olabilir. Dahası, şişeler etiketli olarak gelebilir.

Color differentiation of plastic bottles
During the recycling process different colored PET-bottles should be separated. Even light blue colored plastic bottles must be differentiated from clear transparent PET-bottles. At this the speed of the bottles is a few m/s. There can be condense water accumulated in the bottles, which causes water drops inside the bottles. Furthermore the bottles come with a label.
Data
sheet:


APP N° 175

Automotive Industry (Automobilindustrie)   
Farklı yapılara sahip iki plastik kalıbın renk ayrımı
Farklı yapılara sahip iki plastik kalıbın renk ayrımı gerçekleştirilebilir. Burada, iki farklı yapıdaki plastiğin renkleri aynıdır.

Color differentiation of two different structured plastic moldings
Two different structured plastic components should be distinguished. At this, the background color is exactly the same.
Data
sheet:


APP N° 174

Automotive Industry (Automobilindustrie)   
Otomobil iç mekan bileşenlerinde kullanılan suni derinin ayrımı
Farklı renklerdeki iç mekan bileşenlerinin renksel ayrımı yapılabilir.

Differentiation of leather imitations of interior automotive components
Different colored interior components should be distinguished.
Data
sheet:


APP N° 173

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bulaşık makineleri üzerindeki kaynak hatlarında kaçak saptaması
Bulaşık makineleri üzerindeki kaynak hatlarının sızdırmaları saptanabilir. Burada, sprey uçlu robot ekipman bulaşık makinesinin iç kenarlıklarına bir floresan sprey sıkar. Şayet kaynak hattında sızdırma var ise, floresan sıvı buralardan sızar ve floresan renk dedektörü ile saptanır.

Leak detection of welding lines on dish washers
Leaks should be detected on welding lines of dish washers. At this, a robot equipped with a spray nozzle sprays a fluorescent liquid into the inner chamber of a dish washer. If leaks are present in the welding line, the fluorescent liquid flows through these leaks and can be detected with a fluorescent color detector.
Data
sheet:


APP N° 172

Automotive Industry (Automobilindustrie)   
Packaging Industry (Verpackungsindustrie)   
Alüminyum tüpler üzerindeki kıvrımların sayısının tam hesaplanması
Birkaç m/s hızla ilerleyen aluminyum tüpler üzerindeki kıvrımların sayısı tam olarak hesaplanabilir.

Precise counting of folds of aluminum tubes
The folds of aluminum tubes should be counted during a fast movement (a few m/s) of the tubes.
Data
sheet:


APP N° 171

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Otomobil endüstrisinde iç mekanlarda kullanılan dokumaların renk ayrımı
Farklı kumaşlar renk kontrolü ile ayırt edilebilir.

Color differentiation of fabrics in the interior field of the automotive industry
Different fabrics should be distinguished by color control.


APP N° 170

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Yalıtımlı ve yalıtımsız metal telin çap kontrolü
Yalıtımsız metal telin (çap:50 µm)yalıtımlı (çap:110 µm) metal telden ayrımı gerçekleştirilebilir.

Diameter control of a metal wire with and without insulation
The diameter of a wire without insulation (Ø 50µm) should be differentiated from a wire with insulation (Ø 110µm).
Data
sheet:


APP N° 169

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Gümüş renkli metal tellerin renk kontrolü
Gümüş renkli metalin gri skaladaki rengi kontrol edilebilir. Homojensizlikten kurtulmak için telin renk kontrolü yapılmalıdır.

Color control of silver colored metal wires
The color as well as the gray scale of a silver colored wire can differ in a coil. To avoid these inhomogenities the wire should be color controlled.
Data
sheet:


APP N° 168

Automotive Industry (Automobilindustrie)   
Süsleme kalıplarının renk ayrımı
Farklı renklere sahip süsleme kalıplarının renk ayrımı yapılabilir. Bileşenlerin parlak olduğu hesaba katılmalıdır.

Color differentiation of garnish moldings
Different colored garnish moldings should be distinguished. It has to be taken into account, that the components are very shiny.
Data
sheet:


APP N° 167

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Su soğutucu olarak kullanılan metal yüzeyin üzerindeki sprey noktalarının saptanması
Uygun mavi bir sprey ile işaretlenmiş su soğutucularının hasarı ve hataları kontrol edilebilir. Renk noktasının yoğunluk ve boyutu fazlasıyla farklılık gösterir.

Detection of spray marks on the metal surface of water cooler
Defective or damaged water coolers will be marked during the assembling process with a blue spray mark. Intensity and size of the color mark, however, differs extremely.
Data
sheet:


APP N° 166

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Güvenlik kağıtlarının baskılama prosesi sırasındaki renk ve kontrastının kontrolü
Güvenlik kağıtlarının baskılama prosesi sırasındaki renk ve kontrastının kontrolü referans renk şeridinin üzerindeki iki alan üzerinden gerçekleştirilebilir.

Color and contrast control during the printing process of safety paper
During the printing of safety paper the color as well as the contrast should be controlled on two fields on the reference color stripe.
Data
sheet:


APP N° 165

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Duş hortumlarının kalite denetlemesi
Duş hortumlarının yüzeyi kontrol edilebilir. Açık gri ton, gri ton ve sarı yüzeyler, metalik çakışmalar ve kırmızı bant gibi malzeme hataları saptanabilir.

Quality inspection of shower hoses
The surface of shower hoses should be controlled. Failures like slight gray tint, gray tint (bloom), yellow tint surfaces (yellowness) but also a metallic overlap and a red ribbon should be detected.
Data
sheet:


APP N° 164

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir metal plaka üzerinde kaynak çizgisinin ve verniklenmiş kaynak çizgisinin yüksekliğinin ölçülmesi
Kaynak çizgisinin yüksekliği kontrol edilebilir, burada, kaynak çizgisinin varlığı taşlama prosesinden önce ve verniklenmiş kaynak çizgisinin yüksekliği taşlamadan sonra kontrol edilmelidir.

Measurement of the height of a welding line and a polished welding line on a metal sheet
The height of a welding line should be controlled; at this, the presence of the welding line has to be checked before the grinding process and the height of the polished welding line has to be measured after the grinding process.
Data
sheet:


APP N° 163

Automotive Industry (Automobilindustrie)   
Bir lastik damga üzerindeki UV- floresan sarı kaplamanın varlığının kontrolü
Bir lastik damga normal olarak floresan tabaka ile kaplanır. Eğer UV-ışık kullanılırsa bu tabaka mavi floresandır. Bu mavi floresan kaplamaya ek olarak, sarı floresan kaplama lastik damga üzerindeki hata alanının işaretlenmesi için kullanılır. Amaç, ilk olarak mavi UV kaplanan lastik damga üzerindeki, UV floresan sarı ikinci kaplamanın saptanmasıdır.

Presence control of a UV fluorescent yellow coating on a rubber seal
A rubber seal is normally coated with a fluorescent layer. This layer is fluorescent in blue if UV light is used. Additionally to this blue fluorescent coating a yellow fluorescent coating is used for marking defect areas on the rubber seal. The task is now to detect the UV fluorescent yellow coating on a rubber seal, which is primary UV blue coated.
Data
sheet:


APP N° 162

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bakım pedleri üzerindeki bir etiketin varlığının kontrolü
Bakım pedleri üzerindeki bir etiketin varlığının kontrolü gerçekleştirilebilir.

Presence control of a label on a nursing pad
The presence of a label on a nursing pad should be controlled.
Data
sheet:


APP N° 161

Synthetic Industry (Kunststoffindustrie)   
Poliüretan profillerin genişlik kontrolü
Değişik renklerdeki poliüretan profillerin genişlik kontrolü proses esnasında kontrol edilebilir.

Width control of polyurethane profiles
The width of different colored polyurethane profiles should be measured during the production.
Data
sheet:


APP N° 160

Synthetic Industry (Kunststoffindustrie)   
Poliüretan profillerin yükseklik kontrolü
Değişik renklerdeki poliüretan profillerin yükseklik kontrolü proses esnasında kontrol edilebilir. Poliüretan malzemenin az da olsa süt kıvamında olduğu ve bu özelliğinin üzerine düşürülen ışığın bir kısmının yüzeye girebilmesine sebep olduğu göz önünde bulundurulmalıdır.

Height control of polyurethane profiles
The height of different colored polyurethane profiles should be controlled. It has to be aware that the polyurethane material is slightly milky which means, that light which is directed onto the profile will partly enter the surface.
Data
sheet:


APP N° 159

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Otomobil iç mekanlarında kullanılan plastik düğmelerin renk kontrolü
Plastik düğmelerin renk kontrolü gerçekleştirilebilir. Plastik düğmelerin yan yana dizilme açısının proses sırasında rastgele olduğu hesaba katılmalıdır.

Color control of plastic buttons in the automotive interior field
Plastic buttons should be color controlled. It has to be taken into account, that the angle alignment of the plastic buttons is arbitrary during the control process.
Data
sheet:


APP N° 158

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Bir geçirgen plastik filmin kenar konumunun kontrolü
Bir geçirgen plastik filmin kenar konumu kontrol edilebilir.

Edge position control of a transparent plastic film
The position of the edge of a transparent plastic film should be controlled.
Data
sheet:


APP N° 157

Automotive Industry (Automobilindustrie)   
Mat ve parlak kromat düğmelerin ayrılması
Mat bir kromat düğme ve parlak kromat düğmelerin birbirlerinden ayrılması gerçekleştirilebilir.

Differentiation of a matt and a glossy chromate knob
A matt chromate knob should be differentiated from a glossy chromate knob.
Data
sheet:


APP N° 156

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Siyah ve kahverengi iç bileşenler arasındaki renk ayrımı
İki plastik iç bileşenin renksel ayrımı yapılabilir. Montaj nedenlerden dolayı iki bileşenin sırasıyla arka kısım ve ön kısımları kontrol edilebilir.

Color differentiation between black and dark brown plastic interior components
Two plastic interior parts should be color differentiated. Due to assembly reasons, the backside as well as the front side of the two components should be controlled, respectively.
Data
sheet:


APP N° 155

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir metal disk üzerindeki düzenli renk noktalarının saptanması
Bir metal disk üzerindeki düzenli renk noktalarının varlığı saptanabilir. Kısmen silinmiş renkli ve renksiz kısımlar ortaya çıkarılabilir.

Detection of a proper color mark on a metal disk
The presence of a proper color mark on a metal disk should be detected. The parts with a missing color mark as well as the parts with a color marks which are partly erased should be sorted out.
Data
sheet:


APP N° 154

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir lamba içerisindeki bir filamanın tutucuları arasındaki mesafenin saptanması
Bir flamanın tutucularının mesafelerinin konumu kontrol edilebilir. Boşluk olması sebebiyle sadece yansıma sisteminin kullanılması gerekmektedir. Lamba filamanlarla birlikteyken tutucular pozisyon kontrollü olarak hareket ettirilirler.

Detection of the distance holders of a filament in a bulb
The position of the distance holders of a filament should be controlled. There is only a chance to use a reflective system due to space reasons. The bulb together with the filament and the holders can be moved position controlled.
Data
sheet:


APP N° 153

Automotive Industry (Automobilindustrie)   
Diş sistemine sahip olan ve olmayan şaft arasında ayrım
İki farklı metal şaftlarının ayrımı gerçekleştirilebilir. Bir tanesi düz silindirik yüzeye sahipken diğer tür bir dişli çark ile gelir.

Differentiation between a shaft with and without a tooth system
Two different metal shafts should be differentiated. The one has a flat cylindrical surface whereas the other type comes with a cogwheel.
Data
sheet:


APP N° 152

Automotive Industry (Automobilindustrie)   
Bir şaft üzerinde floresan kürlenmiş yapıştırıcının saptanması
Şaft üzerinde, şaft ile rulo ara kısımlarını monta etmek için floresan yapıştırıcı kullanılır.

Detection of fluorescent cured glue on a shaft
On a shaft fluorescent glue is used to seal the intersection between the shaft and a roll.
Data
sheet:


APP N° 151

Automotive Industry (Automobilindustrie)   
Suni derilerin ayrımı
İki farklı siyah suni derinin ayrımı gerçekleştirilir ve parlaklık ölçüm aleti ile parlaklık faktörünün dokümantasyonu alınır.

Differentiation of leather imitations
Two black leather imitations should be differentiated and the gloss factor should be documented with a gloss measurement device.
Data
sheet:


APP N° 150

Environmental Technology (Umwelttechnik)   
Atık su saptanması ve sınıflandırılması
Atık su saptanmalı, kontrol edilmeli ve sınıflandırılmalıdır. Bu ölçümün amacına ulaşması için gözetilebilen camlar kullanılır ve ayrıca optik ucun atık suya daldırılması yöntemi de kullanılabilir.

Waste water detection and classification
Waste water should be detected, controlled and classified. For this purpose sight glasses can be used for the measurement or even dipping the optical front end unit into the waste water is also possible.
Data
sheet:


APP N° 149

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Suyla nemlenmiş ve kuru zemin döşeme arasındaki ayrımın gerçekleştirilmesi
Nemlendirme sonrası zemin döşemelerin neminin uygun nem aralığında olup olmadığı kontrol edilmelidir. Eğer nem derecesi düşük ise döşemeler daha parlak görünmekle birlikte nem derecesi yüksek ise döşemeler koyu görünür. Normalde döşemeler gri renge sahiptir.

Differentiation between water moistened and dry floor tiles
After the moisturization the floor tiles should be checked, whether the amount of moisture is in the right range or out of range (too much or too little moisture content). The tiles looks brighter if the degree of moisture is too small and the tiles looks darker as normal if too much water is on the tiles. In the normal case the tiles looks gray in color.
Data
sheet:


APP N° 148

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Sprey kutularının üzerindeki renk işaretlerinin saptanması
Farklı sprey kutularının üzerindeki renk işaretleri saptanabilir. Yapışkan çizgiye ve arka plan rengine dikkat edilmelidir.

Detection of color marks on spray cans
Color marks should be detected on different spray cans. Attention should be paid to the background color as well as to the glue line.
Data
sheet:


APP N° 147

Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bir tampon üzerindeki ipliğin pozisyon kontrolü
Bir tamponun arka kısmındaki ipliğin doğru konumu kontrol edilebilir. Doğru pozisyondan kasıt, siyan renkli ipliğin tampon arka planını tamamen kapsamasıdır. İpliğin doğru pozisyonu geçirgen plastik film üzerinden kontrol edilmelidir.

Position control of a thread on a tampon
The right position of a thread on the backside of a tampon should be controlled. Right position means in this case, that the cyan colored thread should cover nearly the whole backside of the tampon. The position of the thread must be checked through a transparent plastic film.
Data
sheet:


APP N° 146

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ağaç kazıkları içerisindeki düğüm ve kabukların saptanması
Ağaç kazıklarının, düğüm ve bark içermeden üretilmesi gerekmektedir.

Detection of knots and bark in wooden stakes
Wooden stakes should be produced free of knots and bark.


APP N° 145

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Kaplanmış tellerin kaplanmamış tellerden ayrımı
Yaklaşık 0.12 mm çapa sahip teller kaplanmalı ve kaplamanın var olup olmadığı gözlemlenmelidir.

Differentiation of coated wires from uncoated wires
Wires of approximately 0.12mm in diameter must be coated and it should be monitored, whether the coating is present or not.
Data
sheet:


APP N° 144

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Fayansların konumunun gözlenmesi
Bir taşıma bantı üzerindeki fayansların dizilimi kontrol edilmelidir.Fayansları 4’ e bölen 3 adet oyuk olmalıdır ve bu oyuklar taşıma bandına dik olarak dizilmelidir.

Position monitoring of tiles
The orientation of tiles on a conveyor belt should be controlled. There are three chamfers which splits the tile into four parts and these chamfers should be perpendicular orientated on the conveyor belt.
Data
sheet:


APP N° 143

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Kanca ve ilmek hızlandırılarının pozisyonlarının gözlenmesi
Cırt cırt hızlandırıcıların dizilimleri kontrol edilebilir.

Position monitoring of hook-and-loop fasteners
The orientation of Velcro® fasteners should be controlled.
Data
sheet:


APP N° 142

Automotive Industry (Automobilindustrie)   
Suni derilerin dizilim kontrolü
Farklı renklere sahip suni derilerin dizilimleri kontrol edilebilir.

Control of the orientation of leather imitation
The orientation of different colored leather imitations should be controlled.
Data
sheet:


APP N° 141

Automotive Industry (Automobilindustrie)   
Plastik bileşenlerdeki yıkayıcıların konumunun gözlenmesi
Yıkayıcıların dizilimi ön veya arka kısım üste gelmek koşuluyla kontrol edilebilir. Dizilim sorunlarından dolayı üstten kontrol mümkün değildir.

Position monitoring of washers in plastic components
The orientation of washers (backside or front side above) should be checked. To control from the top (perpendicular to the surface) is not possible due to arrangement reasons.
Data
sheet:


APP N° 140

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Metal bir plaka üzerindeki kaplamanın varlığının kontrolü
Metal bir plaka üzerindeki kaplamanın varlığının kontrolü gerçekleştirilebilir.

Presence control of a coating on metal sheet
The presence of a coating on a metal sheet should be controlled.
Data
sheet:


APP N° 139

Automotive Industry (Automobilindustrie)   
Bir silikon başlığın pozisyon kontrolü
Yarı-geçirgen silikon bir başlığın pozisyon kontrolü gerçekleştirilebilir.

Position control of a silicon cap
The position of a semi transparent silicon cap should be controlled.


APP N° 138

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir alüminyum diskin eksantrik kontrolü
Fil şeritlerinin sarma ve geri sarma işlemleri için kullanılan alüminyum disklerin eksantrik kontrolü yaklaşık 10 µm hassasiyetle kontrol edilebilir.

Eccentricity control of an aluminum drive disk
The eccentricity of an aluminum driving disk, which is used for winding and rewinding of film strips, should be controlled with an accuracy of approximately 10µm.
Data
sheet:


APP N° 137

Automotive Industry (Automobilindustrie)   
Kauçuk fitil bileşenin konumlandırılması
Kauçuk fitil bileşenin tam konumlandırılması gerçekleştirilebilir.

Positioning of a rubber seal component
A rubber gasket should be exact positioned.
Data
sheet:


APP N° 136

Automotive Industry (Automobilindustrie)   
Bir kauçuk fitil üzerindeki mamul bilgisinin varlığının kontrolü
Bir kauçuk fitil üzerindeki sarı renkli mamul bilgisinin varlığı kontrol edilebilir.

Presence control of an inscription on a rubber seal
On a rubber seal the presence of a yellow inscription should be checked.
Data
sheet:


APP N° 135

Automotive Industry (Automobilindustrie)   
Farklı renklendirilmiş üç farklı spiral yayın renk ayrımı
Üç farklı renge boyanmış spiral yayların ayrımı gerçekleştirilebilir. Kontrol edilmesi gereken pozisyonda yayın pozisyonu rastgele konumlandırılır.

Color differentiation of three different colored spiral springs
Three different colored spiral spring types should be differentiated. At the position where it should be controlled the position of the coil spring is accidentally oriented.
Data
sheet:


APP N° 134

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Automotive Industry (Automobilindustrie)   
Alüminyum tüp içersindeki liflerin varlığının kontrolü
Yaklaşık 160 mm boya ve 14 mm çapa sahip alüminyum tüplerdeki lif varlığı kontrol edilebilir. Bir alüminyum tüpün iyi olarak nitelendirilebilmesi için hiç lif içermemesi gerekmektedir. Tüpler konumlandırılır ve ekseni etrafında 360o dönerler. Tüplerin boyutları, sensörlerin konumlandırılması için yeterlidir.

Control of the presence of fibers in an aluminum tube
In aluminum tubes with a length of approximately 160mm and an inner diameter of 14mm the presence of fibers should be checked, at which a good tube is a tube without any fibers. The tubes can be positioned and turned 360° around, around both ends of the tube there is space enough for mounting the sensors.
Data
sheet:


APP N° 133

Automotive Industry (Automobilindustrie)   
Bir vites kutusunun farklı parçalarının renk kontrolü
Bir vites kutusunun farklı parçalarının renk kontrolü gerçekleştirilebilir.

Color control of different components of a gear box
After the assembling of a gear box, the different components must be controlled in relation to the color.
Data
sheet:


APP N° 132

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir aşındırıcı bloğun profil ölçümü
Bir taşlama taşının hatları ölçülebilir. Gerekli ölçüm aralığı 20mm’ dir.

Profile measurement of an abrasive block
The contour of a grinding stone should be measured. The necessary measurement range is approximately 20mm.
Data
sheet:


APP N° 131

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Plastik tekfilamanların ayrımı
Farklı boyut ve renge sahip plastik tekflamanların ayrımı gerçekleştirilebilir.

Differentiation of plastic monofilaments
Plastic monofilaments, different in size or in color, should be differentiated.
Data
sheet:


APP N° 130

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Broşürler üzerindeki floresan şeridin saptanması
Bir reklam malzemesi üzerindeki floresan şerit saptanabilir. Baskı şirketleri, market zincirlerinden promosyon malzemeleri siparişi alabilirler. Kendi adresleri hariç, marketler tam olarak aynı broşüre sahiptirler ve bu nedenle baskı şirketindeki paketleme prosesi esnasında çok dikkatli olunmalıdır. Burada, bir floresan şerit ilk on broşür üzerine boyanır. Baskı prosesinin en başında sensörün floresan şerite tanıtılması mümkündür ve böylece reklam malzemesinin kağıdı floresan ve optik soğurmadan korunmuş olur.

Detection of a fluorescent stripe on leaflets
On an advertising material a fluorescent stripe should be detected. Print shops get orders for promotion material from chain of stores. The stores of a chain have exactly the same leaflet except the address of the respective store, thus it must be paid attention during the packaging process in the print shop. At this a fluorescent stripe will be painted onto the first ten leaflets with the other address. At the beginning of the printing process it is possible to teach the sensor onto the fluorescent stripe, thus the fluorescent as well as optical absorption effects from the paper of the advertising material can be compensated.
Data
sheet:


APP N° 129

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Kör deliklerin kör vida dişlerinden ayrımı
Metal bloklar üzerinde kör deliklerin ve kör vida dişlerinin varlığının kontrolü gerçekleştirilebilir.

Differentiation of blind holes and blind threads
On metal blocs a presence control of blind threads and blind holes should be realized.
Data
sheet:


APP N° 128

Packaging Industry (Verpackungsindustrie)   
Bir sigara kartonu üzerindeki floresan lakenın renk kontrolü
Bir sigara kartonu üzerindeki floresan lakenın renk ve yoğunluğu kontrol edilebilir. Sigara kartonun üzerinde farklı floresan noktaların olabileceği, fakat bu floresan noktaların renginin (mavi) floresan lakenin renginden (yeşil) farklı olduğu unutulmamalıdır.

Color control of a fluorescent lacquer on a cigarette box
The color as well as the intensity of a fluorescent lacquer on a cigarette box should be controlled. It should be noted that there are also other fluorescent marks on the cigarette box, but these colors are different (blue) from the fluorescent lacquer (green).
Data
sheet:


APP N° 127

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Deliklerin çap kontrolü
Alüminyum bloklar üzerindeki deliklerin çap kontrolü gerçekleştirilebilir. Çapı 8 mm’ ye kadar olan deliklerin çapları ölçülebilir.

Diameter control of holes
The diameter of holes in an aluminum bloc should be controlled. Holes with diameters up to 8mm must be measured.
Data
sheet:


APP N° 126

Chemical Industry (Chemische Industrie)   
Lakeların renk kontrolü
Lakaelar sırasıyla kontrol edilmelidir. Burada, laka içerisine özel bir kılıf uygulanmaktadır.

Color control of lacquers
The lacquer should be inline controlled. At this a special casing is used which will be plunged into the lacquer.


APP N° 125

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir ampül içerisindeki filamanın konumlandırılması
Bir filaman bir ampül içerisine oldukça uygun bir şekilde konumlandırılmalıdır. Filamanın eğri olduğu göz önüne alındığında bunun sonucunda filamanın sonunun ampülün simetri ekseninde olmadığı düşünülmelidir. Ampülün iç çapı yaklaşık olarak 1.8 mm’ dir ve filamanın çapı 0.3 mm civarındadır.

Positioning of a filament in a bulb
A filament must be positioned precisely into a bulb. It should be noted that the filament can be bent, thus the end of the filament lies not on the symmetrical axis of the bulb. The inner diameter of the bulb is equal to approximately 1.8mm and the diameter of the filament is around 0.3mm.
Data
sheet:


APP N° 124

Automotive Industry (Automobilindustrie)   
Bir yığın üzerindeki metal plakanın saptanması
Metal plakalar yığın üzerinden robot yardımıyla kaldırılabilir. Son metal plaka kaldırıldıktan sonra bir sensör robota esas plakanın kaldırılmasından kaçınılması gerektiği konusunda bilgi verir. Esas plaka MDF, ağaç, kauçuk veya metal olmakla birlikte metal plakadan farklıdır.

Detection of a metal sheet on a stack
Metal plates are removed from a stack with a robot. After the last metal sheet is removed a sensor should inform the robot to avoid that the base plate will be sucked up from the robot too. The base plate can consist of MDF (medium density fiberboard), wood, rubber or even a metal which is different from the metal sheet.
Data
sheet:


APP N° 123

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Robot Industry (Roboterindustrie)   
Çift levha kontrolü
Metal plakalar istiften robot yardımıyla kaldırılır. Robot, iki metali aynı anda ayırmaktan kaçınacak bir şekilde metali sırayla tutar. Bir sensör, çift yaprağı üstten değil yandan saptar. Ayrıca, sistem bir metal levha türünün değişmesinden sonra farklı kalınlık, farklı malzeme gibi özelliklere kolay adapte olmalıdır.

Double sheet control
Metal plates should be removed from a stack with a robot. The robot sucks the metal sheets one by one and it should be avoided for safety reasons to move two metal sheets simultaneously. A sensor should detect double sheet not from the top but from the side. Furthermore, the system should be adapted automatically after a change of the type of metal sheet (different thickness or different metal).
Data
sheet:


APP N° 122

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
Kapsül yön kontrolü
Mekanik rehber içerisindeki kapsüllerin yönleri kontrol edilebilir. Bir kapsül, biri diğerinden 0.3 mm daha fazla çapa sahip iki parçadan oluşmaktadır. Kapsüller lineer olarak 0.4 m/s hızla hareket eder ve farklı türden kapsüllerin çapları 3mm ile 8 mm arasında değişiklik gösterir. Kapsüller beyazdan siyaha tüm renklere sahip olabileceği gibi geçirgen de olabilir.

Capsule direction control
The direction of capsules in a mechanical guide should be controlled. The capsules consist of two parts at which one component has a diameter which is approximately 0.3mm bigger as the other. The capsules will be linearly moved with a speed of 0.4m/s and the diameter of the different types is between roughly 3mm and 8mm. The color of the capsules can change from white to black, all colors even transparent types are possible.
Data
sheet:


APP N° 121

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Bir geçirgen plastik kapak üzerindeki düz dişlerinin varlığının kontrolü
Bir geçirgen plastik kapak üzerindeki düz dişlerin varlığının kontrolü gerçekleştirilebilir. Düzgün olmayan kapak üzerinde, düz tırtık kısmen mevcut olmaz.

Control of the presence of straight knurling on a transparent plastic closure
On a transparent plastic closure the straight knurling should be detected. On incorrect closures the straight knurling is partly not present.
Data
sheet:


APP N° 120

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Çift geçirgen film kontrol
Bir geçirgen kabarık folyonun varlığı yansıyan sensör sistemi ile kontrol edilebilir. Ayıca, bir-iki-üç kabarıklığın birbirlerinden ayrımı gerçekleştirilebilir.

Double transparency film control
The presence of a transparent blister foil should be controlled with a reflective sensor system. Furthermore it must be distinguished between one, two or three blisters.
Data
sheet:


APP N° 119

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Bir dokuma üzerinde faklı iki rengin saptanması
Otomobil koltuk dokumaları üzerinde farklı renklerin saptanması gerçekleştirilebilir.

Differentiation of two colors on a fabric
On a fabric for car seats the two colors must be differentiated.
Data
sheet:


APP N° 118

Textile Industry (Textilindustrie)   
Bir alüminyum masuranın rotaston yönünün saptanması
Bir alüminyum masuranın rotasyon yönü ve frekansı saptanabilir. Alüminyum masura üzerinde sırasıyla kırmızı yeşil ve mavi renkler mevcuttur.

Detection of the direction of rotation of an aluminum coil
The frequency as well as the direction of rotation of an aluminum coil should be detected. There are two red, green and blue color marks on the aluminum coil, respectively.
Data
sheet:


APP N° 117

Textile Industry (Textilindustrie)   
Alüminyum masurada yiv saptanması
Alüminyum masura üzerindeki yiv çok önemlidir ve iplikle kaplı yüksekliği kontrol edilebilir. Montaj durumu nedeniyle, bunu gerçekleştirmek için tek yol bobinin deliklerden bakmaktır.

Detection of a thread on an aluminum coil
A thread is wound on an aluminum coil and the height of the coil which is covered from the thread should be detected. Due to the installation situation, the only way to realize it is to look through the holes of the coil.
Data
sheet:


APP N° 116

Pharmacy (Pharmazie)   
Bir ilaç kutusu içindeki spatulanın renk varlığının belirlenmesi
Bir ilaç kutusu içindeki spatulanın renk varlığı belirlenebilir. Test sırasında ön kısım açık olmalıdır.

Control of the presence of the spatula in a pharmaceutical box
The presence of a fluorescent spatula in a pharmaceutical box should be checked. During the tests the front side is open.
Data
sheet:


APP N° 115

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Bir dişli üzerindeki koni yüzeyinin kalite kontrolü
Bir dişli üzerindeki koni yüzeyinin kalite kontrolü gerçekleştirilebilir. Düzgün bir koninin yüzeyi oldukça homojendir, kötü bir dişlinin yüzeyi çizikler içerir. İncelemelerde dişli kendi eksenin etrafında döner. Sensör ve nesne arasındaki mesafe 200 mm olmalıdır.

Quality control of the surface of a cone on a cogwheel
The surface of the cone on a cogwheel should be checked. The surface of a proper cone looks very homogeneous; the surface of a bad cogwheel shows grooves and scratches. For investigations the cogwheel can be turned around its axis. The distance from the sensor to the object should be around 200 mm.
Data
sheet:


APP N° 114

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Tek renkli ve iki renkli kabloların birbirinden ayrımı
Kabloların kıvrım prosesi sırasında monokromatik veya dikromatik kabloların sarmal olduğu kontrol edilmelidir. Burada, kablolar 15 m/s hızla taşınır ekseni etrafında 360o ‘ yi 0.5 saniyede döner. Bu dönme sırasında renk kontrolü gerçekleştirilir. Kabloların çapı 1.35 mm ile 3 mm arasında olmalıdır. Çift renkli kablo üretmek için tek renkli kablo kullanılır ve yaklaşık 0.8 mm genişliğinde bir çizgi kablo üzerine çizilir ve 0.7 mm çapa sahip beyaz ışık renk kontrol amacıyla kullanılır.

Differentiation between single-colored and two-colored cables
During the coiling process of cables it has to be checked, whether monochromatic or dichromatic cables will be winded. At this the cables will be transported with a speed of 15 m/s and the cable will be turned 360° in 0.5 seconds around the axis. This turn around its axis can be used for color control. The smallest diameter of the cables is Ø 1.35 mm and the biggest diameter is around Ø 3mm. To produce a two-colored cable, a single-colored cable is used and a line with a width of approximately 0.8mm will be painted onto the cable, hence a white light spot with a diameter of Ø 0.7mm is used for color control.
Data
sheet:


APP N° 113

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Dişlilerin renk ayrımı
Amaç, siyah kaplanmış ve kaplanmamış dişlilerin ayrımını gerçekleştirmektir. Ayrıca sensörün nesneye olan uzaklığı minimum 160 mm olmalıdır.

Color differentiation of cogwheels
The task is to differentiate between black coated and non-coated cogwheels. Furthermore the minimum distance from the sensor to the object should be 160mm.
Data
sheet:


APP N° 112

Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
εx- aralığında pozisyon kontrolü
Bir metal plakanın εx- aralığında pozisyon kontrolü gerçekleştirilebilir.

Position control in the Ɛx range
The position of a metal blade should be controlled in the Ɛx range over a measuring range of approx. 6mm.
Data
sheet:


APP N° 111

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Pharmacy (Pharmazie)   
Chemical Industry (Chemische Industrie)   
Işın sistemi içerisinden lazer ile damla kontrolü
Damlaların sayısı ve hacmi kontrol edilebilir.

Drop control with a laser through beam system
The number as well as the volume of drops should be controlled.
Data
sheet:


APP N° 110

Automotive Industry (Automobilindustrie)   
εx- aralığında spray jet kontrolü
εx- aralığında spray jet kontrolü için en uygun sistem εx- bölgesinde elektronik bileşen içermeyen fakat optik fiber içeren bir ünitedir.

Spray jet control in the Ɛx range
For the spray jet control in the Ɛx range (zone 0) the most suitable system is a unit which comes without electronically components in the Ɛx zone, but with fiber optics.
Data
sheet:


APP N° 109

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal bir halka üzerindeki kaynak çizgisinin saptanması
Amaç, metal bir halka üzerindeki kaynak çizgisinin saptanmasıdır. Ölçüm sırasında metal halka dönme hareketi sergiler.

Detection of a welding line on a metal ring
The task is to detect the welding line on a metal ring. During the measurement, the metal ring will be turned around.
Data
sheet:


APP N° 108

Synthetic Industry (Kunststoffindustrie)   
Textile Industry (Textilindustrie)   
Tek filamanların bağ ve hata kontrolü
Filamanlar ve dişler üzerinde bağ ve hatalar saptanabilir. Burada, farklı çapa sahip filamanlar ve dişlerr kullanmak mümkündür ve besleme hızı birkaç m/s’ dir.

Knot and defect control of mono filaments
Knots as well as defects on mono filaments and threads should be detected. At this, different diameters of filaments and threads are possible and the feed rate lies in the range of a few m/s.
Data
sheet:


APP N° 107

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Cable Industry / Stamping Industry (Kabelindustrie / Stanztechnik)   
Elektrik bileşenlerin pim genişlik kontrolü
Elektrik bileşenlerin pim genişlik kontrolü gerçekleştirilebilir.

Pin width control of electrical components
The width of the pins of an electrical component should be controlled.
Data
sheet:


APP N° 106

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Elektrik bileşenlerinin pim yükseklik kontrolü
Üretim sırasında elektrik bileşenlerin pim yükseklik kontrolü gerçekleştirilebilir.

Pin height control of electrical components
The height of the pins of an electrical component should be controlled during the production.
Data
sheet:


APP N° 105

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Robot Industry (Roboterindustrie)   
Automotive Industry (Automobilindustrie)   
Packaging Industry (Verpackungsindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Pharmacy (Pharmazie)   
Sprey jet miktar kontrolü
Sprey jet yoğunluk kontrolü gerçekleştirilebilir.

Spray jet amount control
The density of the spray jet should be controlled.
Data
sheet:


APP N° 104

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ağaç işi parçalarının sıralı çap kontrolü
Çubuk hareket ederken, ağaç işi parçaların üretimi sırasında çapları kontrol edilebilir.

Inline diameter control of wooden staff
During the production of wooden staff the diameter must be controlled while the rod is moved.
Data
sheet:


APP N° 103

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Hava kabarcıklı paketlerin sayısının kontrolü
Havalı paketlerin el ile proses edilmesi sırasında birden fazlanın taşınmasından kaçınılmalıdır.

Control of the number of blister packages
During the handling process of blister packages it can happen, that more than one blister package will be transported simultaneously, this should be avoided.
Data
sheet:


APP N° 102

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir filaman üzerinde spiral pozisyonun kontrolü
Işık ampül endüstrisinde kullanılan bir filaman üzerindeki spiral sarımın pozisyonu kontrol edilebilir. Filaman üzerinde boşlukları farklı olan iki tür spiral mevcuttur. Filaman hızı yaklaşık olarak 0.02 m/s, çapı türüne göre 0.3mm-1.5mm arasında değişmektedir ve spiraller arası maksimum boşluk 1mm’ dir.

Spiral position control on a filament
The position of the spiral coil on a filament for the light bulb industry must be controlled. There are two different types of spirals, different in gapping, on the filament. The speed of the filament is approximately 0.02m/s, the diameter of the filament is dependent of the type (min. 0.3mm and max. 1.5mm) and the maximum gapping of the spiral is 1mm.
Data
sheet:


APP N° 101

Glass Industry (Glasindustrie)   
Pharmacy (Pharmazie)   
İlaç endüstrisinde kullanılan cam şişelerin kaplama prosesi sırasında sprey-jet kontrolü
İlaç sektörü için kullanılan cam şişelerin üretimi sırasında iç yüzey tamamen kimyasal film ile kaplanmalıdır. Burada, kristaller bir püskürtücü ile şişe boyun kısmından şişe içerisine doğru spreylenmelidir. Bu proses sırasında şişelerin sıcaklığı birkaç yüz oC olmalıdır.

Spray-jet control during the glass bottle coating process in the pharmaceutical industry
During the production of glass bottles for the pharmaceutical industry the inner surface must be coated with a certain chemical film, which makes the bottles diffuse. At this crystals will be sprayed through the bottle neck with a nozzle into the bottle. During this process, the bottles have still a temperature of a few hundred centigrade.
Data
sheet:


APP N° 100

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Kapıların verniklenmesi sonrasında parlaklık ölçümü
Kapıların verniklenmesinden hemen sonra parlaklık faktörü kontrol edilebilir. Yapılan testler sonucunda kapı üzerine spreylenen vernik miktarı parlaklık faktörünü etkilemektedir. Yüzeye yeterli vernik sürülmediği takdirde pürüzlü bir yüzey oluşmaktadır.

Gloss inline measurement after the varnish of doors
Immediately after the varnish of the doors the gloss factor should be controlled. Tests have shown that the amount of varnish, which will be sprayed onto the door surface, influences the gloss factor. If not enough varnish is used the surface becomes rough.
Data
sheet:


APP N° 99

Automotive Industry (Automobilindustrie)   
Kapı iç bileşenlerinde renk ve parlaklık ayrımı
Farklı renklerdeki parçalar ayırt edilebilmelidir. İlgili bileşenlerin renk farkları küçük olabilir fakat parçaların farklı yapıları sebebiyle parlaklıkta ciddi farklar olabilir.

Color gloss differentiation of door interior components
Different colored interior parts must be differentiated. The color differences between the respective components are relatively small but there is a good difference in the gloss factor due to the different structure of the part.
Data
sheet:


APP N° 98

Environmental Technology (Umwelttechnik)   
Atık suyun yağ miktarının saptanması
Bir yağ prosesi sırasında atık sudaki yağ miktarı kontrol edilebilir. Atık su içerisindeki yağ akısının tipik değeri 500 ppm’ dir ve amaçlanan oran 100ppm’ dir. Burada, yağ akısının floresan özelliğinden faydalanılabilir.

Oil containing waste water detection
On an oil press the amount of oil in the waste water must be controlled. Typical values are 500ppm of flux oil in the waste water and the goal is to reach the 100ppm. At this the fluorescent effect of the flux oil can be used.
Data
sheet:


APP N° 97

Automotive Industry (Automobilindustrie)   
Gösterge panosu bileşenleri üzerindeki keçe dokusunun varlığının kontrolü
Gösterge panosu ekipmanları üzerindeki keçe varlığı kontrol edilebilir ve ayrıca iki ayrı keçe birbirlerinden ayrılabilir.

Presence control of felt textile on dashboard components
On dashboard instruments the presence of felt must be controlled furthermore two felts must be differentiated.
Data
sheet:


APP N° 96

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Kapakların arka ve ön kısımlarının birbirlerinden ayrımı
Dağıtıcının üretimi sırasında nemli mendillerin kapatma yeri kontrol edilmelidir.

Differentiation between front side and back side of closures
During the production of dispensers for moist wipes the closure site (front side and back side) must be controlled.
Data
sheet:


APP N° 95

Packaging Industry (Verpackungsindustrie)   
Sigara paketlerinin üzerindeki etiket kontrolü
Sigara paketlerinin üzerinde etiket olup olmadığı kontrol edilebilir. Burada, sigara paketi ve etiket geçirgen parlak plastik film ile paketlenmiştir.

Seal control on cigarette boxes
On cigarette boxes the seal must be controlled, whether it is present or not. At this the cigarette box as well as the seal is already packed into a transparent shiny plastic film.
Data
sheet:


APP N° 94

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Delinmiş sigara kağıtlarının denetlenmesi
Sigara kağıdının lazer ile delinme sırasında delikler etrafında bazen kısmi yanıklar oluşmaktadır. Belirli bir mesafeden gözlenen, beyaz kağıt üzerindeki gri şeritlerin varlığıdır. Delik şeritler sıralı kontrol edilirken rengin ve yoğunluğun kısmen griye dönüşüp dönüşmediği belirlenir. Ayrıca, yanmış, az yanmış, düzenli şeritler arası mesafelerin kontrolü mümkündür.

Inspection of perforated cigarette paper
During the laser perforation of cigarette paper it happens sometimes that around the holes the paper is partially burned. Observed from a certain distance, the cigarette paper looks like a white paper with more or less gray stripes. The perforated stripes should be inline controlled, whether there is a color as well as intensity shift into the gray range. Furthermore, a distinction between burned stripes, slightly burned stripes, proper stripes and no stripes should be possible.
Data
sheet:


APP N° 93

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Krom kaplanmış parlak ve mat bileşenlerin ayrımı
Krom kaplanmış parlak ve mat bileşenlerin ayrımı gerçekleştirilir. Nesnelerin boyutları eşittir ve sensör ile nesne arası mesafe 8 mm’ dir.

Differentiation of chrome plated shiny and chrome plated matt components
Chrome plated shiny components must be distinguished from chrome plated matt parts. The size of the objects is equal; there is only 8mm space in height under the object for the sensor front end.
Data
sheet:


APP N° 92

Synthetic Industry (Kunststoffindustrie)   
Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Şırınga kapsüllerinin renk ayrımı
Şırınga kapsüllerinin renk ayrımı gerçekleştirilebilir. Burada, aynı kapsül türlerinin kabul edilemez renk grupları oluşturup oluşturmadıkları saptanabilir.

Color differentiation of syringe capsules
Syringe capsules must be color differentiated. At this, there should be detected also an unacceptable color change from batch to batch of the same capsule type.
Data
sheet:


APP N° 91

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Tek renkli ve iki renkli kabloların ayrımı
Üretimleri sırasında tek renkli ve iki renkli kabloların ayrımının yapılması gereklidir. Maksimum üretim hızı yaklaşık 15 m/s ve en küçük çap değeri 1.35 mm’ dir. Kablo ekseni etrafında 360o ‘yi 0.5 saniyede dönme hızına sahiptir. İki renkli kablo şeridinin genişliği yaklaşık 0.8 mm’ dir.

Differentiation of a unicolor and a bicolor cable
During the production of cables a differentiation between unicolor and bicolor cable is necessary. The production maximum speed of the cable is approximately 15m/s and the diameter of the smallest cable is around 1.35mm. The cable is rotating around the axis in 0.5 seconds 360° at this velocity. The color stripe of the bicolor cable has a width of about 0.8mm.
Data
sheet:


APP N° 90

Packaging Industry (Verpackungsindustrie)   
Provisions Industry (Lebensmittelindustrie)   
Şarap şişeleri üzerinde tıpa varlığının kontrolü
Üretim hattında şarap şişeleri üzerinde tıpa varlığının kontrolü gerçekleştirilebilir. Burada, faklı renk ve yüksekliğe sahip farklı şişeler kontrol edilir. Bir diğer problem ise tıpa renginin gruptan gruba farklılık göstermesidir.

Presence control of cork on wine bottles
The presence control of a cork on a wine bottle must be realized in a production line. At this different bottles, different in color and slightly different in height must be controlled. Another problem is that the color of the cork can also differ from batch to batch.
Data
sheet:


APP N° 89

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Bir kağıt bandrol üzerindeki renk noktasının saptanması
Farklı renkli bir şerit üzerindeki beyaz bir nokta saptanabilir. Banknota bağlı olarak şerit sarı, kahverengi kırmızı, mavi, yeşil, mor ve gri gibi farklı renklere sahip olabilir. Maksimum ürün hızı yaklaşık olarak 10 m/s’ ve renk noktasının boyutları yaklaşık 6mmx4mm’ dir. Sensör, beyaz renk noktasının pozisyonu hakkında bilgi verir.

Color mark detection on a paper banderole
A white color mark must be detected on a different colored stripe. Depended of the bank note, the stripe can have a color of e.g. yellow, brown, red, blue, green, violet and grey. The product runs with a maximum speed of approximately 10m/s and the size of the color mark is about 6mm x 4mm. The sensor should deliver precise information about the position of the white color mark.
Data
sheet:


APP N° 88

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Bir aşındırıcı bant üzerindeki floresan yapışkan kontrolü
10mm genişliğe sahip yapışkan şerit içeren aşındırıcı bant malzemenin üretimi sırasında floresan yapışkanın varlığı gözlemlenebilir. 2mm’ den daha büyük hatalar düzgün bir şekilde saptanabilir. Sensör ile nesne arası mesafe yaklaşık 20 mm ve saptama alanı 2mm x 10mm civarındadır.

Fluorescent glue control on an abrasive belt
During the production of abrasive belt material with a 10mm wide glue stripe the presence of the fluorescent glue must be observed. Defects greater than 2mm in length must be proper detected. The distance of the sensor head to the object should be approximately 20mm and the detecting range around 2mm x 10mm.
Data
sheet:


APP N° 87

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Aşındırıcı şeritler üzerinde sıralı parlaklık ölçümü
Parlaklık faktörü aşındırıcı şeritlerin yüzey kalitesi için önemli bir parametredir. Bu nedenle aşındırıcı yüzeylerinde kalite kontrol için sıralı parlaklık faktörü ölçümü yapılmaktadır.

Inline gloss measurement on abrasive belts
The gloss factor is a significant parameter for the surface quality, the roughness, of an abrasive belt. Thus a gloss measurement inline sensor should be used for quality control of the abrasive surface.
Data
sheet:


APP N° 86

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Farklı miktarda çizgi içeren farklı renklerdeki plastik parçalarının renk ayrımı
4 ( 4 uzun bir kısa )ve 5 ( 5 uzun) bar içeren plastik parçaların renkten bağımsız ayrımı yapılabilir.

Differentiation of different colored plastic parts with different number of bars
Plastic parts with four (the bar located in the middle is shorter) and five long bars must be distinguished independent of the color.
Data
sheet:


APP N° 85

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Pembe bir hava yastığı dokuması üzerinde beyaz bandın saptanması
Pembe bir hava yastığı dokuması üzerinde beyaz bant saptanabilir. Bir yandan beyaz bandın renk ayrımı gerçekleştirilirken diğer taraftan hava yastığının farklı arka plan renklerinin ayrımı gerçekleştirilir.

Detection of a white tape on a pink airbag textile
The white tape on a pink airbag textile must be detected. Thereby it must be differentiated between the color of the white tape on the one hand and all of the other background colors of the airbag (pink, pink with red thread, blue and white textile) on the other hand.
Data
sheet:


APP N° 84

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Siyah ve kaplanmamış metal vites dişlisinin renk ayrımı
Siyah bir metal vites dişlisinin kaplanmamış dişliden ayrılması gerçekleştirilmelidir. Sensör ile nesne arasındaki mesafe 160mm ve spot boyutu 3mm çapta olmalıdır.

Color differentiation between a black and an uncoated metal gear wheel
A black metal gear must be distinguished from an uncoated metal gear. The distance from the sensor to the object should be 160mm and the spot size should be around 3mm in diameter.
Data
sheet:


APP N° 83

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Bir hava yastığı kumaşı üzerindeki ipliklerin ayrımı
Farklı renklere sahip iplikler ayrılmalıdır. Burada, iplikler iki renkli olabilir.

Differentiation of threads on an airbag textile
Different colored threads must be differentiated. At this, the treads can be also bicolored.
Data
sheet:


APP N° 82

Automotive Industry (Automobilindustrie)   
Kauçuk bir fitil üzerinde renk noktası saptanması
Kauçuk bir fitil üzerinde sarı renk noktası saptanabilir.

Color mark detection on a rubber seal
A yellow striped color mark should be detected on a rubber seal.
Data
sheet:


APP N° 81

Automotive Industry (Automobilindustrie)   
V-kayışı pozisyon kontrolü
V-kayış makarası üzerinde V-kayış mesafe değişimi kontrol edilmelidir çünkü V-kayışı V-kayış makarası üzerine düzgün olarak konumlanmaz.

V-belt position control
The lateral displacement of a V-belt in a V-belt pulley must be controlled, because it happens that the V-Belt lies not properly in the V-belt pulley.
Data
sheet:


APP N° 80

Automotive Industry (Automobilindustrie)   
İç ekipmanların renk ayrımı
Otomobil endüstrisinde kullanılan farklı iç ekipmanların, ahşap-plastik-metal, ayrımı gerçekleştirilebilir. Bazı ahşap ve plastik elemanlar parlak olabilirken diğer bileşenler difüz olabilir.

Color differentiation of interior equipment
In the automotive industry different interior parts (wooden as well as plastic and metal elements) must be differentiated. Some wooden and plastic elements are very glossy whereas other components are diffuse.
Data
sheet:


APP N° 79

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Rulmanlerin ayrımı
Aynı boyutta fakat farklı renklere sahip rulmanler ayrılabilir. Burada, bir rulman türü altın iç halka içerirken diğer rulman gümüş renk iç halka içerir. Rulmanler minimum 160mm mesafeden kontrol edilmelidir.

Differentiation of ball bearings
Ball bearings with the same size but with a different color ring must be differentiated. At this one ball bearing type has a golden colored inner ring, whereas the other type is equipped with a silver colored inner ring. The ball bearing has to be controlled at a minimum distance of 160mm.
Data
sheet:


APP N° 78

Packaging Industry (Verpackungsindustrie)   
Kağıt poşetin sayılması
Kağıt poşetlerin üretimi sırasında ve paketlemeden hemen önce sayısı hesaplanabilir. Burada, üretim hızı ve sensörün çantaya olan mesafesi değişebilir, 80mm mesafe değişimi örtüşebilir. Ayrıca, sensörün 5000 çanta/saat hıza sahip üretime uygun olması gerekir. Buna ek olarak sıralı paketlerin kenar mesafeleri değişebilir ve taşınım mekanizmasına göre kağıt üzerinde küçük delikler meydana gelebilir.

Paper bag counting
During the production of paper bags and just before packaging the number of bags must be counted. At this the production speed as well as the distance from the paper bag to the sensor can be changed, therefore a distance change of 80mm must be covered. Furthermore the sensor must be applicable for a speed range starting from 0 up to 50000 bags / hour. In addition the distance between the edges of the sequent bags can be fluctuating and there are due to the transport mechanism sometimes small holes in the paper surface.
Data
sheet:


APP N° 77

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Aşındırıcı kayışların kenar kontrolü
Aşındırıcı kayışların kenarları belirli bir değere kadar taşlanmalıdır. Bu nedenle taşlama derecesi kontrol edilmelidir.

Edge control of abrasive belts
The edges of abrasive belts must be grinded to a certain degree. Thus, the degree of grinding should be controlled.
Data
sheet:


APP N° 76

Packaging Industry (Verpackungsindustrie)   
Pharmacy (Pharmazie)   
İlaç flakon kapakları üzerinde floresan işareti kontrolü
Orijinal ilaç flakon ve sahte olanı ayırt etmek için orijinali floresan renk ile işaretlenir. Bu renk işareti paketleme işlemi sırasında tespit edilmelidir.

Fluorescent mark control on closures of pharmaceutical flacons
To distinguish between original pharmaceutical flacons and counterfeits the closure of the original will be marked with a fluorescent color. This color mark must be detected during the packaging process.
Data
sheet:


APP N° 75

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Baskı sektöründe yan ve boyuna liste kontrolü için renk işareti algılama
Renk işaretleri gibi web offset baskı yamukluğu, yan ve boyuna liste için kullanılacaktır. Her renk için bir renk işareti, tüm renk işaretleri siyah renk işareti ile senkronize olacak şekilde kullanılır.

Color mark detection for side and longitudinal register control in the printing industry
In the web offset printing trapezoid like color marks will be used for the side register as well as the longitudinal register control. For each color a color mark is used, at which all color marks will be synchronized to the black color mark.
Data
sheet:


APP N° 74

Synthetic Industry (Kunststoffindustrie)   
Automotive Industry (Automobilindustrie)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Plastik filmlerin ve lamine plakaların sıralı parlaklık kontrolü
Plastik filmlerin ve lamine plakaların üretimleri sırasında sıralı parlaklık faktör kontrolü gerçekleştirilir.

Inline gloss measurement of plastic films and laminated plates
During the production of plastic films as well as of laminated plates the gloss factor should be measured.
Data
sheet:


APP N° 73

Environmental Technology (Umwelttechnik)   
Güneş ışığı hücrelerinin renk ayrımı
Güneş ışığı hücrelerinin sahip olduğu mavi renk fabrikadan fabrikaya ve üretim hattımdan üretim hattına göre değişkenlik gösterir. Bu nedenle güneş ışığı hücrelerinin rengi kontrol edilmelidir.

Color differentiation of solar photo cells
The blue color of solar photo cells can differ due to the production process from factory to factory and even from line to line in the same factory. Thus, the color of the solar photo cells should be controlled.
Data
sheet:


APP N° 72

Packaging Industry (Verpackungsindustrie)   
Karbon fiber güçlendirilmiş plastik filmler üzerindeki toz kaplamanın saptanması
Karbon fiber güçlendirilmiş plastik filmler üzerindeki toz kaplama (kalınlık) prosesi sırasındaki kalite kontrolü gerçekleştirilmelidir.

Detection of powder coating on carbon fiber reinforced plastic films
During the powder coating of carbon fiber reinforced plastic films the quality of the coating (thickness of the layer) has to be controlled.
Data
sheet:


APP N° 71

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Synthetic Industry (Kunststoffindustrie)   
Optik geçirgen plastik folyonun pozisyon kontrolü
Optik geçirgen plastik folyonun pozisyonu yaklaşık 50mm aralıkla kontrol edilebilir.

Optical transparent plastic foil position control
The position of an optical transparent plastic film should be controlled in a range of approximately 50mm.
Data
sheet:


APP N° 70

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Bir metal plaka üzerindeki gravür noktanın saptanması
x-, y- ve hadde yönü konumlaması için kullanılan bir gravür nokta saptanabilir.

Detection of an engraving mark on a metal plate
An engraving mark which is used for positioning in x-, y- and roll-direction has to be detected.
Data
sheet:


APP N° 69

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Kağıt kenarı pozisyon kontrolü
Kağıt kenar pozisyonları 50mm aralıklarla kontrol edilebilir. Sistem (0V ile +10V) aralığında ve kağıt kenarına göre değişen bir analog sinyal dağıtır.

Paper edge position control
The position of the edge of a paper line must be controlled in a range of 50mm. The system should deliver an analogue signal (0V … +10V) which is proportional to the position of the edge of the paper.
Data
sheet:


APP N° 68

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Gazeteler üzerindeki floresan şeridin saptanması
Gazeteler üzerindeki hatalar floresan şerit ile saptanabilir. Bu hatalı gazeteler otomatik olarak saptanabilir ve hatasız ürün grubundan ayrılır.

Fluorescence stripe detection on newspapers
Newspapers with quality defects will be marked with a fluorescence stripe. These newspapers must be automatically detected and rejected from the normal product stream.
Data
sheet:


APP N° 67

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Mobilya endüstrisinde sıralı parlaklık kontrolü
Kapıların üretimi sırasında boya hattından hemen sonraki aşamada renk miktarı kontrol edilmelidir.

Inline gloss control in the furniture industry
During the manufacturing process of doors just after the painting line the amount of color must be controlled.
Data
sheet:


APP N° 66

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Mobilya sektöründe renk gözlemi
Kapıların üretim prosesi sırasında renkleri kontrol edilebilir ve gözlenebilir. Burada, renkler kapı üzerine robot tarafından spreylenir. Bu prosesten hemen sonra fakat kurulamadan önce renkler kontrol edilmelidir.

Color monitoring in the furniture industry
During the manufacturing process of doors the color must be controlled and monitored. At this the color will be sprayed with spray nozzles, which are mounted on a robot, onto the doors. Just after this process but before the drying process the color should be controlled.
Data
sheet:


APP N° 65

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Güvenlik paketlerinin üzerindeki referans su noktasının saptanması
Referans su noktasının pozisyonu sıralı saptanmalıdır. Boyama prosesi sırasında referans su noktasına senkronizasyonu gereklidir.

Detection of a reference water mark on safety paper
The position of a reference water mark must be inline detected. During the printing process it is necessary to synchronize the consecutive registers to the reference water mark.
Data
sheet:


APP N° 64

Packaging Industry (Verpackungsindustrie)   
Kaplanmış ve kaplanmamış tüplerin birbirlerinden renksel ayrımının yapılması
Tüpün iç kısmının kaplanıp kaplanmadığı kontrol edilmelidir. Burada, kaplanmış yüzey açık sarı, kaplanmamış yüzey gümüş renginde gözükür.

Color differentiation between a coated and an uncoated tube
The interior zone of a tube should be checked whether it is coated or uncoated. At this, the coated surface is slightly yellow in color whereas the uncoated surface is silver in color.
Data
sheet:


APP N° 63

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Baskı sektöründe holografik referans işaretlerinin süper hızlı algılaması
Holografik işaretlerin özelliklerinden biri belli bir açı altında paralelleştirilmiş ışığın doğrudan geri yansımasıdır. Holografik işaretlerin çoğu için bu açı 45 ° 'ye eşit ve paralel ışın baskılı folyo taşıma yönüne diktir.Doğrudan geri yansıma davranışı şeffaf ve metalize holografik folyo üzerinde gözlemlenebilir.

Super fast detection of holographic reference marks in the printing industry
One of the properties of holographic marks is the direct back reflection of collimated, parallel light under a certain angle. For most of the holographic marks this angle is equal to 45° and the collimated beam is directed perpendicular to the transport direction of the printed foil. This behavior of direct back reflection can be observed on transparent as well as on metalized holographic foils.
Data
sheet:


APP N° 62

Glass Industry (Glasindustrie)   
Automotive Industry (Automobilindustrie)   
Boyalı cam plakaların renk kontrolü
Araç camları üretimleri sırasında kapı camlarının renk kontrolü gerçekleştirilmelidir. Sadece tek taraftan kontrol mümkündür ve fazladan bir yansıtıcı kullanılamaz.

Color control of tinted glass plates
During the assembling of cars the color of the glasses from the side door must be checked. It is only possible to control from one side and even an additional reflector cannot be used.
Data
sheet:


APP N° 61

Glass Industry (Glasindustrie)   
Boyalı ve renklendirilmiş cam plakaların renk ayrımı
Cam plakaların prosesi sırasında farklı boyalı ve renklendirilmiş camlar kontrol ve ayırt edilmeli.

Color differentiation of tinted and colored glass plates
During the subsequent processing of glass plates the different tinted and colored glasses must be controlled and discerned.
Data
sheet:


APP N° 60

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Floresan sıvıların ve noktaların renk ayrımı
Bugüne kadar üretilen floresan sensörler sadece floresan nesnenin yoğunluğunu saptar, rengini değil. Ayrıca, bu sensörler zayıf floresan nesnelerin veya 80mm’ den uzak mesafedeki nesnelerin saptanmasında güçlük çeker ve ortam ışığına karşı hassastırlar. Floresan renk nokta saptaması için,renk sensörleri kullanılır.

Color differentiation of fluorescent liquids and marks
Available fluorescent sensors so far detect only the intensity of a fluorescent object but not the color. Furthermore these sensors have a problem to detect very weak fluorescent objects or fluorescent objects at a distance more than 80mm and additionally they are sensitive against ambient light. For the purpose of fluorescent color mark detection a color sensor for fluorescent colors should be used.
Data
sheet:


APP N° 59

Glass Industry (Glasindustrie)   
Şeffaf Cam Levhanın Pozisyon Ölçümü
Cam işleme makinaları sadece cam levha mesafesi ile ilgili değil aynı zamanda cam levhanın kenar konumu hakkında da bilgilendirilmelidir. Bununla birlikte, özellikle kenar yakınlarında faz mevcut değilse, saydam cam levhanın kenarlarını tespit etmek kolay değildir. Standart bir cam yüzey üzerinde görünür ışığın doğrudan yansıma oranı %4 ve ikinci yüzeyin ek yansımaları ile %8 civarında olacaktır.

Position measurement of a transparent glass plate
Glass handling machines must be informed not only about the distance of a glass plate but also about the edge position of a glass plate. However the detection of the edge of a transparent glass plate is not so easy, especially if there is nearly no phase on the edges. The direct reflection rate of visible light on a standard glass surface is normally approximately 4% and with the additional reflection of the second surface around 8% of the light will be reflected.
Data
sheet:


APP N° 58

Glass Industry (Glasindustrie)   
Şeffaf Cam Plakalar Üzerinde Mesafe Ölçümü
Cam levhaların taşınma işlemi sırasında cam yüzeyler arasındaki mesafe kontrol edilmelidir. Şevleme işlemi sırasında cam yüzeyler, taşlama makinesinin aşındırıcı blokları içinde kenarların simetrik olarak beslenebileceği şekilde pozisyonlanmalıdır. Aksi takdirde cam levhanın her iki fazı farklı olur. Cam yüzeyi yansıyan ışığın yayılmasına hiç müsaade etmediğinden ve yansıyan ışığı sadece yönlendirdiğinden dolayı, standart bir lazer yerdeğiştirme sensörü kullanılamaz.

Distance measurement on transparent glass plates
During the handling process of glass plates the distance of the glass surface must be controlled. As during the beveling process the glass plate must be positioned in a way that the glass edges can be feed symmetrically into the abrasive block of the grinding machine, otherwise the phases on both sides of the glass plate are different. Due to the fact, that the glass surface delivers nearly no diffuse reflected light but only direct reflected light, a standard laser displacement sensor cannot be used.
Data
sheet:


APP N° 57

Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Textile Industry (Textilindustrie)   
Farklı Renklerdeki Köpük Malzemelerde Floresan Çizgisinin Tespiti
Farklı renklerdeki köpük malzemelerde, floresan çizgisi tespit edilmelidir.

Detection of a fluorescent line on different colored foamed materials
A fluorescent line must be detected on different colored foamed materials.
Data
sheet:


APP N° 56

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Holografik kodlayıcı disklerinde yükseklik farkı ölçümü
Holografik kodlayıcı disk yüksekliğinin temazsız bir yolla kontrol edilmesi gerekir.

Measurement of the height difference of holographic encoder disks
The height of holographic encoder disks must be controlled in a non contact way.
Data
sheet:


APP N° 55

Chemical Industry (Chemische Industrie)   
Sıvıların Renk Kontrolü
Sıvının rengi normalde beyaz olmalıdır, fakat kırmızı yada yeşil aralığına sürüklenmeler olur . Bu geçişin kontrol edilmesi gerekir.

Color control of an emulsion
The color of the emulsion which should be controlled is normally white but it can happen that the color is drifting slightly into the red or the green range. This drift must be controlled.
Data
sheet:


APP N° 54

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Environmental Technology (Umwelttechnik)   
Seçici Akı Uygulamalarında Lehim Kontrolü
Seçici lehimlemenin seçici akı uygulamaları ile kombinasyonu popüler hale geliyor. Özellikle karışık PCB panoları üreticileri, bu yeni teknolojiden yararlanır. Sadece lehimlenecek alanlar, lehimlenir. Bunu başarmak için, milimetrenin onda biri kadar çap uzunluğuna sahip basınçlı püskürtücü küçük akı damlacıkları üretir. Saçılma açısı, damlacıkların sadece planlanan yere çarptığından emin olmak için çok küçüktür. Yönünün yanı sıra, miktarlarının da kontrol edilmesi gerekir.

Soldering flux control during the selective flux application
Selective soldering in combination with selective flux application becomes more and more popular. Especially manufacturers of mixed assembled PCB boards benefit from this new technology. Only the areas which will be soldered will be covered from the soldering flux. To achieve this, a piezo nozzle is used to generate small flux droplets with a diameter of a few tenth of a millimeter. At this the scattering angle is very small which make sure, that the droplets strike only the scheduled area. The amount as well as the direction of the droplets should be controlled.
Data
sheet:


APP N° 53

Automotive Industry (Automobilindustrie)   
Otomobil İçindeki Deri ve Suni Deri Arasındaki Renk Parlaklılığının Ayrımı
Otomobilin iç alanında bazen farklı malzemeler birbirine çok benzerler. Farklı malzemelerin düzgün biçimde ayırt edilebilmesi için renk parlaklığı tespit edilmelidir.

Color-gloss differentiation of leather and leather imitations in the automotive interior field
In the automotive interior field the different materials looks sometimes very similar. For a proper differentiation of the different products color-gloss detection should be used.
Data
sheet:


APP N° 52

Automotive Industry (Automobilindustrie)   
Otomobilllerde Deri ve Suni Derinin Ayrımı
Bazen en iyi renk sensörü kullanılsa bile tam olarak aynı renk ve parlaklık faktörü ile iç mekan malzemeleri arasında renk ayrımı yapmak mümkün değildir. Bu nedenle başka bir sensör bu açığı kapatmalıdır. Gerçekten de resimler de gösterildiği gibi aynı renk ve parlaklıkta farklı yapıya sahip malzemeler olabilir.

Differentiation of leather and leather imitations in the automotive interior field
Sometimes a color differentiation between interior materials with exactly the same color and the same gloss factor is not possible, even with the best color sensor. Thus another sensor must close this gap. Indeed the different materials may have the same color and the same gloss, but a different structure as shown in the photos.
Data
sheet:


APP N° 51

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Construction Industry / Ceramic-finish Industry (Bauindustrie / Keramikverarbeitung)   
Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Aşındırıcı Kemer Ayrımının Kontrolü
Farklı zımpara kayışları farklı kenarlarla donatılmıştır ve kontrol edilmek zorundadır. Bu ayrım, aşındırıcı kenarında zımpara tarafında yada arka tarafında bulunabilir. Dahası, kenar arka tarafından daha koyu olabilir ama çoğunlukla zımparalama yüzeyi daha parlaktır. Bununla birlikte marj ve arka yan arasında yada zımpara tarafı ile yeteri kadar kontrast farklı vardır.

Control of margined abrasive belts
Different sanding belts are equipped with a margin and this margin has to be controlled. The margin can be present on the sanding side of the abrasive belt or on the rear side. Furthermore the margin can be darker than the rear side but mostly it is brighter than the sanding surface. Nevertheless there is a sufficient difference in contrast between the margin and the rear side or the sanding side.
Data
sheet:


APP N° 50

Environmental Technology (Umwelttechnik)   
Akı Varlığında ve Yokluğunda Renk Kontrolü
Bir kiriş makine iletim bandı üzerinde fotovoltaik hücrelerin montaj işlemi sırasında, lehim varlığı ve yokluğu kontrol edilmelidir.

Color control of the presence or absence of the flux
During the assembling process of photovoltaic cells on a stringer machine the conduction band must be controlled in respect of the presence or absence of the soldering flux.
Data
sheet:


APP N° 49

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Bir Elektrikli Diş Fırçasının Şaftının Eksantrik Kontrolü
Frekans kadar bir elektrikli diş fırçasının eksantrik genliği de kontrol edilmelidir.

Control of the eccentricity of the shaft of an electrical tooth brush
The frequency as well as the amplitude of the eccentric of an electric tooth brush should be controlled.
Data
sheet:


APP N° 48

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
LED Renk Kontrolü
Bir elektrik diş fırçası üzerindeki LED rengi kontrol edilmelidir. Ayrıca AÇIK / KAPALI - LED'ler de belirlenmelidir.

LED color control
On an electrical toothbrush the color of the LEDs should be controlled. Furthermore the ON/OFF times of the LEDs should be determined, too.
Data
sheet:


APP N° 47

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ahşap Plakalar Üzerinde Floresan İşaretleri Renginin Algılanması
Ahşap plakalar üzerinde kusurları bir floresan işaretleyici ile işaretlenecektir. Floresan işareti normalde yaklaşık 15 mm genişliğe sahiptir ve bu iki işaretin birbirine uzaklığı 20 mm olmalı ve iki işaretin de tespit edilmesi gerekir. Dahası objeye uzaklığı 200 mm iken 5 mm boyutlu hatalar tespit edilebilmelidir.

Color detection of fluorescent marks on wood plates
On wooden plates defects will be marked with a fluorescent marker. The fluorescent mark has normally a width of about 15mm and it can happen, that two of this marks lie 20 mm away of each other, but must be detected as two separate marks. Furthermore the fluorescent marks should be detected at a distance of 200 mm to the object and even a mark with a width of 5mm should be detected.
Data
sheet:


APP N° 46

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Alüminyum Tüplerde Renk İşaretlerini Algılama
Bir alüminyum tüp üzerine püskürtülmüş kırmızı renk işareti borunun doğrusal hareketi sırasında tespit edilmelidir. Ayrıca başka bir alüminyum boru üzerine siyah karakter ve rakamların varlığı da tespit edilmelidir.

Color mark detection on aluminum tubes
A red color mark which is sprayed on an aluminum tube must be detected during the linear movement of the tube. Furthermore on another aluminum tube the presence of black characters and figures should be detected, too.
Data
sheet:


APP N° 45

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Çelik Tel Üzerinde Renk İşareti Algılama
Uçlarından kaynak yapılacak iki çelik tel kırmızı yada mavi ile işaretlenecektir.Dahası bu renk işaretleri işlem sırasında tespit edilmelidir.

Color mark detection on steel wires
The area where the ends of two steel wires are welded together will be marked with either a blue or a red color. During the further processing this color mark must be detected.
Data
sheet:


APP N° 44

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Anotlanmış Alüminyum Tellerin Renk Ayrımı
Anodize tel işlemi sırasında renklerin kontrol edilmesi ( Altın rengi, kırmızı, yeşil mavi)ve yanlış renk kullanılmasının engellenmesi gerekir.

Color differentiation of anodized aluminum wires
During the further processing of anodized aluminum wires the color (blue, gold-colored, red and green) must be controlled, to avoid that the wrong wire will be used.
Data
sheet:


APP N° 43

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Farklı Galvanizli Çelik Tellerin Renk Kontrolü
Kaliteyi korumak için galvenizleme işlemi sonrasında çelik tellerin yüzeylerindeki sabit rengin kontrol edilmesi gerekir.

Color control of different galvanized steel wires
To hold the quality of surface treated steel wire constant a color control after the galvanization process is necessary.
Data
sheet:


APP N° 42

Automotive Industry (Automobilindustrie)   
Emniyet Kemerlerinin Tokalarında Renk Ayrımı
Emniyet kemerlerinin tokalarında bej, gri yada siyah renk hakimdir. Ancak mevcut renklerde ton farkları vardır.

Color differentiation of seat-belt buckles
For the seat-belt buckles colors like beige, gray and black preponderates, but there are different tones in the respective colors present.
Data
sheet:


APP N° 41

Automotive Industry (Automobilindustrie)   
Otomobillerin Kontrol Elemanlarında Renk Ayrımı
Kontrol elemanlarının panoya, kapı yanlarına yada tavana montajı sırasında renklerinin kontrol edilmesi gerekir. Çoğunlukla içerdeki kontrol elemanları kasada da kullanılacaktır bu sebeple parlak renklerle bu yapılmak zorundadır.

Color differentiation of control elements in the automotive interior field
During the assembling process of the control elements into the dashboard, into the car side doors or into the headliner the color must be controlled. Mostly for the housing of the control elements the same lacquer will be used as for the bodywork, which means that we have to do with very glossy colors.
Data
sheet:


APP N° 40

Automotive Industry (Automobilindustrie)   
Otomotiv Sektöründe Plastik Parçaların Renk Ayrımı
Otomotiv sektöründe iç alanda çok fazla plastik bileşen kullanılacaktır. (Kullanılacağı yerler: yan kapılar, araba koltukları, arka kapı, tavan ve pano için) Bu plastik parçaların renkleri daha çok yada daha az ya gri, ya bej yada siyahtır.

Color differentiation of plastic components in the automotive industry
In the automotive industry there will be used a lot of plastic components even in the interior area. These components will be used amongst others for the side doors, the car seats, the rear door, the headliner and the dashboard. The colors of these plastic parts are more or less either gray or beige or black.
Data
sheet:


APP N° 39

Automotive Industry (Automobilindustrie)   
Bir hava yastığı etiketinin renk kontrolü
Bir arabada farklı pozisyonlarda hava yastığı uyarıları yerleştirilir. Bu etiketler yeşil renk aralığında floresandır. Yerleştirilen etiketler mavi renk aralığında hafif floresandır.

Color control of the presence of an airbag label
On different positions in a car there are placed airbag warning notices. These labels are fluorescent in the green color range. The background, where the labels are placed, however, is slightly fluorescent in the blue color range.
Data
sheet:


APP N° 38

Automotive Industry (Automobilindustrie)   
Otomotiv endüstrisinde deri ve suni derinin renk parlaklığını ayırt etme
Otomotiv iç alan bileşenlerinde suni ve suni deriler bulunur. Yanlış parçaların montajlanmasına engel olmak için renklerin parlaklığı kontrol edilmelidir.

Color gloss differentiation of leather and leather imitations in the automotive industry
In the automotive interior field components made of leather as well as of leather imitations are available. To avoid, that the wrong parts will be mounted a quality check with a color gloss sensor must be done.
Data
sheet:


APP N° 37

Automotive Industry (Automobilindustrie)   
Kapı kollarında renk ayrımı
Kapı kollarının montajı sırasında yanlış renkteki parçanın montajlanmasını engellemek için renk kontrolü yapılmalıdır.

Color differentiation of car door handles
During the assembling of the car doors amongst others the car door handles must be color controlled to avoid that a wrong colored part will be mounted.
Data
sheet:


APP N° 36

Automotive Industry (Automobilindustrie)   
Otomotiv iç alanında suni derinin ve kumaşların renk ayrımı
Araba kapıları, koltukları ve tavan döşemeleri için kullanılan farklı suni derilerin ve kumaşların hatalı montajını önlemek için kontrol edilmesi gerekir.

Color differentiation of leather imitations and textiles in the automotive interior field
Different leather imitations and textiles which are used especially for car doors, car seats and headliners must be controlled to avoid failures during the assembling.
Data
sheet:


APP N° 35

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Otomotiv endüstrisinde halıları ayırt etme (İç ekipman)
İç ekipmanlarla halılar birleştirilirken kontrol edilmelidir. Uygulamalarda gri, bej ve siyah tonlar baskın gelir.

Differentiation of carpets in the automotive industry (interior equipment)
During the assembling of carpets into the interior equipment the color of the carpet must be controlled. In practice the gray, beige and black color tones of the carpets preponderates.
Data
sheet:


APP N° 34

Automotive Industry (Automobilindustrie)   
Deri ve suni derinin rengini ayırt etme
Otomotiv endüstrisinde iç ekipman için deri ve suni deri kullanılır.

Color differentiation of leather and leather imitation (interior equipment)
Leather and leather imitations are used for the interior equipment in the automotive industry.
Data
sheet:


APP N° 33

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Hava yastığı ağ sayısının belirlenmesi
Hava yastığının ağ sayıları bir referans arka plan üzerinde tespit edilmelidir.

Determination of the number of airbag webs
The number of airbag webs should be detected on a reference background.
Data
sheet:


APP N° 32

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Hava yastığı tekstilinde kaplanmış ve kaplanmamış yüzeylerin ayırt edilmesi
Hava yastığı üretiminde kumaşın kaplanan tarafı belirlenmelidir. Kaplanmış ve kaplanmamış kumaş arasında Çok ufak bir renk ve parlaklık farkı vardır.

Differentiation of the coated surface from the uncoated surface of an airbag textile
During the manufacturing of airbags the coated side of an airbag textile must be detected. There is just a very small difference in color and gloss between the coated and uncoated side of the airbag textile.
Data
sheet:


APP N° 31

Automotive Industry (Automobilindustrie)   
Otomotiv iç alanındaki plastik parçalarda renk ayırt etme
Otomotiv iç alanında kullanılan farklı renkteki plastik bileşenler ayırt edilmelidir.

Color differentiation of plastic parts in the automotive interior field
Different colored plastic components which are used in the automotive interior field should be distinguished.
Data
sheet:


APP N° 30

Automotive Industry (Automobilindustrie)   
Otomotivde cila renk kontrolü
Otomotiv endüstrisinde cilalı bileşenler, araba üreticilerine yanlış ulaşmasını engellemek için kontrol edilmelidir. Örnek olarak: Tampon, ayna, ultrasonik sensörler, benzin deposu kapağı, araba kapı kolu,araba kapıları ve parlak cilalı ön kapaklar ve bazı yakın renktekiler.

Automotive color lacquer control
In the automotive industry lacquered components must be controlled to avoid wrong delivery to the car manufacturers. Components like bumpers, rearview mirror housings, ultrasonic sensors, fuel tank caps, car door handles, car doors and front lids are painted with a glossy lacquer and some colors lies close together.
Data
sheet:


APP N° 29

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Packaging Industry (Verpackungsindustrie)   
Üretim sürecinde potatif metal tüplerin uzunluk kontrolū
Metal tüplerin üretimi sırasında, önceki kesme işleminden ötürü uzunluklarının kontrol edilmesi gerekir. Metal tüpler için hassasiyet 0,1 mm kadar olmalıdır.

Measurement of length of metal collapsible tubes during the production process
During the production of metal tubes, the length of the tubes must be controlled, because of the previous cutting process of the tubes. The accuracy of the metal tubes should be in a range of a tenth of a millimeter.
Data
sheet:


APP N° 28

Packaging Industry (Verpackungsindustrie)   
Zarflarda floresan yapıştırıcı kontrolü
Zarfların üretimi sırasında alt kısmına floresan yapıştırıcı yerleştirilir.Bazen farklı sebeplerden dolayı (baskı kalıbı üzerindeki hatalar,tutkal yokluğu) kağıt tutkalı bulunmaz. Zarflar ıskarta olacaktır.

Fluorescent glue control on paper bags
During the production of paper bags fluorescent glue will be used to close the bags at the bottom side. Sometimes, due to different reasons (defects on the printing die, cured glue and absence of glue) there is not any glue applied and the paper bags will be produced as cull.
Data
sheet:


APP N° 27

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Packaging Industry (Verpackungsindustrie)   
Renk işaretlerinin saptanması (Kayıt işareti)
Gıda endüstrisi için plastik folyo yazdırma işlemi sırasında baskı üniteleri üzerinde tespit edilmelidir.

Detection of color marks (register marks)
During the printing process of plastic foils for the food industry the color mark must be properly detected on each printing units.
Data
sheet:


APP N° 26

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Tel armatür üzerinde oyuk ve boşluk tespiti
Tel armtürler üzerinde oyuklar kadarboşluklar da elektronik denge sürecinde kontrol edilmelidir. Maksimum hız dakikada 2500 devirdir.

Groove and gap detection on wire-wound armature
The gaps as well as the milled grooves on wire-wound armatures should be detected during the electronic balancing process. The maximum speed is around 2500 revolutions per minute.
Data
sheet:


APP N° 25

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Çocuk bezinde renk işaretlerinin tespiti
Farklı renk işaretleri satır içi sensörü ile tespit edilmelidir. En yüksek üretim hızı 10 m/s’dir.

Detection of color marks on disposal diapers
Different color marks (different in color) should be detected with an inline sensor. The maximum production speed is 10 m/s.
Data
sheet:


APP N° 24

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Üretim sırasında renk ve floresan renk işaretlerinin yoğunluk kontrolü
Basılı floresan yoğunluğu kontrol edilmelidir. Renk yoğunluğu farklı floresan renk işaretleri mevcuttur.Dolayısıyla rengin yanı sıra floresan renk işaretlerinin yoğunluğu da kontrol edilebilir.

Color and intensity control of fluorescent color marks during the production
The intensity of a printed fluorescent color should be controlled. At this, fluorescent color marks with different densities of color are present. Thus, the color as well as the intensity of the fluorescent color mark can be controlled.
Data
sheet:


APP N° 23

Environmental Technology (Umwelttechnik)   
Chemical Industry (Chemische Industrie)   
Sıvı renklerinin kontrolü
Bir su çevrimi sürecinde, suyun kalitesi kontrol edilmelidir. Su kirlilikte hafif mavi yada yağlı olduğunda bej olabilir. İki durumunda tespit edilmesi ve temizlenmesi gerekir.

Colored liquid control
During a water cycle process the quality of the water must be controlled. It can happen that the water becomes slightly blue (pollution) or beige (oily) in color. Both case must be detected, the water must be clean.
Data
sheet:


APP N° 22

Glass Industry (Glasindustrie)   
Renkli cam şişelerin renklerinin ayırt edilmesi
Cam geri dönüşüm endüstrisinde farklı renkteki şişelerin ayırt edilmesi ve doğru sıralanması gerekir.

Color differentiation of colored glass bottles
In the glass recycling industry it is necessary to separate the different colored bottles to get a correctly sorted material.


APP N° 21

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Renk sinyalinin izlenmesi ve kayıdı
Çok sayıda kullanıcı Spectro-3 renk sensörünü, renk sinyalini izlemek ve kaydetmek için arar. Plastik folyo gibi sonsuz malzeme üreticileri (mobilya, kağıt, otomotiv endüstrisi) ve lamine orta yoğunlukta sunta imalatçıları (MDF) hizalama sensörüne, sadece %100 kalite için değil bunun ötesinde renk sinyali kaydı ki bu sinyal ürün numarası, müşteri adı veya numarası operatör adı, saat ve tarih gibi belgeleri sağlar, böyle bir sisteme ihtiyaç duyarlar.Dahası operatöre ürünün renk trendi hakkında bilgi verir, bu sayese mümkün olan önlemler alınır.

Color signal recording and color signal monitoring
More and more users of the SPECTRO-3 color sensors are asking for a color monitoring and color recording software. The manufacturers of endless materials like plastic foils (e.g. furniture, paper and automotive industry) and the fabricators of laminated medium density fiberboards (MDF) needs an inline sensor system not only for a 100% - quality control but beyond that a system for color signal recording, which allows also to document data like product number, customer name or number, order number, operator name, time and date. Furthermore, the sensor system should inform the operator about the color trend of the product, thus possible countermeasures can be duly initiated.
Data
sheet:


APP N° 20

Synthetic Industry (Kunststoffindustrie)   
Packaging Industry (Verpackungsindustrie)   
Kapak kafası rengi kontrolü
Farklı plastik kapak kafalarının rengi kontrol edilebilir.

Closure head color control
Different plastic closure heads should be color controlled.
Data
sheet:


APP N° 19

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal tüplerin üzerinde siyah mürekkep işareti kontrolü
Metal tüpler üzerinde, siyah işaretler mürekkep püskürtmeli yazıcı ile ugulanır. Bazen mürekkep işaretinin pozisyonu yanlış olabilir yada mürekkep yeterli olmayabilir.

Black ink mark control on metal tubes
On metal tubes, black marks will be applied with an ink jet printer. Sometimes the position of the ink mark is not on the right place or the ink coverage is not sufficient.
Data
sheet:


APP N° 18

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Ağaç ve kağıt endüstrisinde taşıyıcı bandın yanal posizyon kontrolü
Kağıt endüstrisinde olduğu kadar ağaç endüstrisinde de (MDF üretimi: orta yoğunlukta sunta) özel taşıyıcı bantlar kullanılır. Dikey pozisyon ±2mm sınırında değişirken yanal pozisyon ±0.2mm sınırında tutulmalıdır. Taşıyıcı bandın malzemesi paslanmaz çelik yada plastik kumaştır.

Lateral position control of conveyor belts in the wood and paper industry
In the wood industry (during the production e.g. of MDFs = medium density fiberboards) as well as in the paper industry, special conveyor belts are in use. The lateral position of the band material must be hold in a range of ±0.2mm, whereas the vertical position can change in the range of ±2mm. The material of the conveyor belt is either stainless steel or plastic fabric.
Data
sheet:


APP N° 17

Glass Industry (Glasindustrie)   
Pharmacy (Pharmazie)   
Temiz ve sütlü cam şişelerin denetlenmesi
Cam endüstrisinde ilaç endüstrisi için cam şişe üretimi sırasında, cam şişeler içerden kaplanmalıdır. Şişenin kaplanıp kaplanmadığı denetlenmelidir.

Detection of clear and milky glass bottles
In the glass industry during the process of glass bottle manufacturing for the pharmaceutical industry, the glass bottles must be coated inside. The task is to check, whether the bottle is coated or uncoated.
Data
sheet:


APP N° 16

Glass Industry (Glasindustrie)   
Mat cam plakalarda parlak bölgelerin denetlenmesi
Mat cam plaka üretiminde yüzey özellikle parlak noktalar için denetlenmelidir. Parlak alanlar yaklaşık 3 mm çaptan başlayarak denetlenebilir.

Detection of glossy regions on a matt-finished glass plate
During the production of matt-finished glass plates the matt-finished surface must be controlled particularly with regard to small glossy spot. The glossy domains which should be detected are starting with a diameter of approximately 3 mm.
Data
sheet:


APP N° 15

Paper Industry / Printing Industry (Papierindustrie / Druckindustrie)   
Güvenli kağıtların üzerinde sedefli renk şeritlerinin denetlenmesi
Güvenlik kağıtları üzerindeki sedefli renk şeritlerinin kalitesi ve pozisyonu kontrol edilebilir.

Detection of pearlescent color strips on security papers
The position as well as the quality of pearlescent multi color strips on security paper should be controlled.
Data
sheet:


APP N° 14

Packaging Industry (Verpackungsindustrie)   
Geçirgen plastik kaplamalı etiketlerin yükseklik kontrolü
Optik geçirgen plastik kaplama ile etiket arasındaki mesafe 0.1 mm hassasiyetle ölçülebilir.

Height control of labels with a transparent plastic covering
The distance of labels with an optical transparent plastic cover should be measured with an accuracy of 0.1mm.
Data
sheet:


APP N° 13

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Automotive Industry (Automobilindustrie)   
Piston çubuğunun yüzey kontrolü: metal yüzey veya krom kaplama
Piston çubuğunun krom kaplama olup olmadığı kontrol edilmelidir.

Surface control of a piston rod: Steel surface or chrome-plated
A piston rod must be controlled whether it is chrome-plated or not.
Data
sheet:


APP N° 12

Automotive Industry (Automobilindustrie)   
İç bileşen üzerindeki farklı iki renk dikişin denetlenmesi
Farklı iki renk dikiş (bej ve gri ) ayırt edilmelidir.

Detection of two different colored threads on interior parts
The task is to distinguish properly between the two different colored threads (beige and gray).
Data
sheet:


APP N° 11

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Beyaz bebek bezlerindeki etiket hizasının denetlenmesi
Bebek bezi montajı sırasında etiketin varlığı ve pozisyonu kontrol edilmelidir.

Inline edge detection of a white label on a white diaper
During the assembly of diapers, the presence as well as the position of the label must be controlled.
Data
sheet:


APP N° 10

Automotive Industry (Automobilindustrie)   
Farklı iki renk suni derinin üzerinde farklı iki dikişin renk kontrolü
Dikişin suni deri üzerinde olup olmadığı kontrol edilmelidir, iki farklı suni deri üzerinde (bej ve gri) sırasıyla bej ve gri dikiş mevcuttur.

Color control of two different seams on two different leather imitations
The task is to detect, whether the seam is present on the leather imitation or not. There are two different colored leather imitations, beige and gray and respectively a beige thread as well as a gray thread.
Data
sheet:


APP N° 9

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal çubuk üzerinde kaynak çizgisinin denetlenmesi
Metal çubuğun dönüşü sırasında kaynak çizgisi kontrol edilmelidir. Metal yüzeyinde pas ve çizik varlığına dikkat edilmelidir.

Detection of a welding line on a metal rod
The welding line must be detected during the rotation of a metal rod. It has to be taken into account, that there are scratches as well as rust on the metal surface.
Data
sheet:


APP N° 8

Automotive Industry (Automobilindustrie)   
Otomotiv endüstrisi entegraston sürecinde ultrasonik sensör kapaklarının renk kontrolü
Tampon içine ultrasonik sensörler monte edilirken, ultrasonik sensör kapakları kontrol edilmelidir.

Color control of ultrasonic sensor caps in the automotive industry during the integration process
During the assembling of the ultrasonic sensors into the bumpers the color of the ultrasonic sensor caps must be controlled.
Data
sheet:


APP N° 7

Machine Building / Metal-working Industry (Maschinenbau / Metallverarbeitung)   
Metal levhanın renk sensörü ile kaplanıp kaplanmadığının ayırt edilmesi
Plaka kapağı ve teneke kutu üretiminde, metal levhanın yönü kontrol edilmelidir. (Ön taraf / arka taraf) Bu sebeple kaplanmış ve kaplanmamış tarafın ayırt edilmesi gerekir.

Differentiation of coated and uncoated metal sheets with the color sensor
During the production of cover plates and tin cans, the direction of the metal sheet (front side / rear side) must be checked. Thus it is necessary to distinguish between the coated and the uncoated side.
Data
sheet:


APP N° 6

Semiconductor Industry / Electrical Industrie (Halbleiterindustrie / Elektroindustrie)   
Birleşme Yüzeyinin Tespiti
Baskı devre kartının hammaddesi sonsuz bir kemer gibi bobin üzerinde bulunur ve birleşme yüzeyleri tespit edilmek zorundadır.

Detection of the bonding surface of raw material for PCBs
The raw material of the printed circuit board is normally placed on a coil as an “endless” belt and anywhere on the belt there is a bonding surface which has to be detected during the unwinding.
Data
sheet:


APP N° 5

Furniture Industry / Wood-working Industry (Möbelindustrie / Holzindustrie)   
Kapı üretiminde vernik kontrolü
1. Kapı üretiminde çok az yanmış kaplama bölgeleri ve yırtılmış kaplamaların denetlenmesi:
Tabakanın hareketi sırasında mdf üzerine kaplama yapıştırılır. Fakat süreç herhangi bir sebeple bölünürse, bu sıcak hava tabancası olabilir, yapıştırıcının ısınmasına, kaplama yüzeyinin tutuşmasına ve hafif yanmasına sebep olur. Dahası, renk sensörü kaplama yırtığını tespit edebilir.
2. Beyaz parlak kaplama ve beyaz mat kaplamayı ayırt etme:
Beyaz parlak kaplama ve beyaz mat kaplama ayırt edilebilir.

Veneer control during the door production
1. Detection of slightly burned veneer zones and veneer tear-off during the door production:
The veneer will be glued onto the mdf plate during the movement, however, if the process will be interrupted due to any reason, it can happen, that the hot air gun, which will be used normally to warm up the glue, scorches or burns the veneer surface slightly. Furthermore the color sensor should detect a veneer tear-off.
2. Differentiation between white glossy veneer and white matt veneer:
The task is to distinguish between white glossy and white matt veneer.
Data
sheet:


APP N° 4

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Bebek bezi üretimi sırasında iplik varlığının denetlenmesi
Bebek bezi üretiminde iplik birleşimi kontrol edilmelidir. Üretim hızı yaklaşık 10 m/s ve bebek bezlerinin yüksekliği çok az değişebilir. Dahası, ipliğin rengi kadar bebek bezinin rengi de beyazdır fakat ek olarak iplik UV ışık etkisi altında iplik floresans mavidir.

Detection of the presence of the fleece during the production of disposable diapers
During the production of disposable diapers the assembling of the fleece must be checked. The production speed is approximately up to 10m/s and the height of the diapers can slightly changing. Furthermore the color of the diaper as well as the color of the fleece is white but additionally to this the fleece is fluorescent in blue under the influence of UV light.
Data
sheet:


APP N° 3

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Textile Industry (Textilindustrie)   
Lamine bandın doğru yön kontrolü (ön/arka tarafın denetlenmesi)
Lamine bandın yönü kontrol edilmelidir.(Üçgen lamine bant) Bandın rengi beyaz,siyah yada kırmızı olabilir.

Detection of the correct direction of a laminated band (front side/back side detection)
The direction of a laminated band (Gore laminated band) must be controlled. The color of the band can be white, black or red.
Data
sheet:


APP N° 2

Medical Technology / Hygienic Technology (Medizintechnik / Hygienetechnik)   
Textile Industry (Textilindustrie)   
Kanca ve raptiye yönü kontrolü
Kanca ve raptiye yönü kontrol edilmelidir.

Hook-and-pile fastener (Velcro®) direction control
The task is to check the direction of the hook-and-pile fastener.
Data
sheet:


APP N° 1

Automotive Industry (Automobilindustrie)   
Textile Industry (Textilindustrie)   
Otomotiv endüstrisinde hava yastığı üretimi kalite kontrolü
1. Hava yastığı tekstilinde kaplanmış ve kaplanmamış yüzey kontrolü:
Hava yastığı kumaşının bir tarafı kaplanmışken diğer tarafı kaplanmamıştır. Üst trafın kaplanıp kaplanmadığı kontrol edilmelidir.
2. Hava yastığı teksitilinde plastik folyo astarının kontrolü:
Plastik folyo astarının varlığı hava yastığı tekstilinde bir kesme boyunca kontrol edilmelidir.

Quality control during the airbag manufacturing in the automotive industry
1. Surface control of the airbag textile coated / uncoated:
One side of the airbag textile is coated, whereas the other side is uncoated. The task is to check, whether the top side is coated.
2. Check of the presence of the plastic foil interlining in the airbag textile:
The presence of a plastic foil interlining should be checked through a cut-out of the airbag textile.



NOTICIAS

Participación en exposiciones:

 •   AIMEX Automation World 2024
 •   IFAT Munich 2024
 •   FIP 2024
 •   PRS Europe 2024
 •   SKZ Innovation Day Recycling
 •   SKZ Network Day
 •   SKZ Technology Day
 •   PRS Middle East & Africa 2024
 •   Plastics Recycling World Expo
     
Europe 2024
 •   Plastics Recycling World Expo
     
North America 2024
 •   PRS Asia 2024
 •   PRS India 2024

más...


Comunicados de prensa:

Calibración de color en línea para reciclados plásticos
(Sistemas de medición de color en línea)

 
Test report on Inline color measurement of recyclates ()
(Sistema de medición de color en línea)

más...


Libros blancos:

Sensor systems for recyclate control in the plastics industry for laboratory and inline use ()
Checking the plastic type of recyclates and virgin material using NIR technology ()

más...


Nuevas aplicacionas:

Detección de abolladuras y protuberancias en tiras metálicas troqueladas
(N° 801)
Distinción entre componentes interiores de cuero, tejido y plástico
(N° 802)
Medición de color de tapas de plástico
(N° 803)

más...


GLOSARIO: ¿Qué es ...
... la tensión superficial?
... la evaporación de aceite?
... la medición de espesor de
    capas de aceite?

más...



Novedades de software:

SPECTRO3-MSM-DIG-Scope V1.5 (2021.10.20)
V1.5.2

más...




FIND US ON ....

Facebook X (Twitter) Instagram Youtube in

 








TOP